Production relief : Discrete job (over completion) not consume MPS Schedule

Dear All,
The case :
I have already create MPS schedule. detail schedule is :
item A
1 Nov : 100 pcs
2 Nov : 100 pcs
3 Nov : 100 pcs
And i have discrete job for 1 nov is 20 pcs. Job status is release.
Then i check my schedule MPS is :
item A
1 Nov : 80 pcs >>> already consume 20 pcs
2 Nov : 100 pcs
3 Nov : 100 pcs
in the same day user have completed and close that job for 30 pcs. (its mean overcompletion 10 pcs)
Then i check my MPS is :
item A
1 Nov : 80 pcs >>> Why 10 pcs for over completion not consume my schedule???
2 Nov : 100 pcs
3 Nov : 100 pcs
Anyone explain this?
Thanks
The Pooh

Hi DST
This is a great effort and gesture. thank you on behalf of all the newbies.
PJ

Similar Messages

Change Department after the Discrete Job got Completed

Hi All,
Please let me know how to change the Department (in Operations) even after the Discrete Job got completed.
This is in Oracle Applications (11.5.10),Oracle Work in Process module.
Thanks a lot.

You will have to undo completion, then undo every operation step (including resource transactions), modify the resource requirements to 0, add new operations and resource requirements and take the job thru' completion.

Job queues are not executed as scheduled

When I upgraded from 9i to 10g, I also migrated my procedures into packages. These procedures were created to be executed on a job queue. I noticed that since I've migrated them into packages, the job queue's stopped executing - it doesn't even look like it tried.
I've pasted a sample of one record taken from 10/23/2008 8:39:00AM:
LAST_DATE: 10/22/2008 8:15:03AM
NEXT_DATE: 10/23/2008 8:15:00AM
BROKEN: N
WHAT: DZSP.JOBS_UTIL.UPLOAD_PLC_2MAXIMO;
INTERVAL: TRUNC(SYSDATE+1)+8.25/24
FAILURES: 0
Your assistance is greatly appreciated!

Thanks for your reply.
Yes, I am using the DBMS_JOBS package. I was not aware that there was another scheduler - is there a difference or preference?
The setting for JOB_QUEUE_PROCESSES is set to 10, DEFAULT=NO.
Hope that helps.

Discrete job History tab shows wrong completed qunatity

Hi All
We are facing an issue, When we perform the WIP completion trx thru mobile apps the completed quantity in discrete job history is not in sink with the transaction.Can any one comment on this issue.
job qnty:256
job status:Closed
In history tab
remaning qnty:135
completed qnty:121
Performed the WIP completion trx for qnty 135 and then for qnty 121 thru mobile apps
Thanks

Welcome to the Forum.
First off if the job belongs to a open INV period, unclose the job (WIPUser>>Discrete>>Close Discrete Jobs>>Close Discrete Jobs (Form)>>Tools>>Unclose).
Then check if there are any pending WIP completions from back end using
peding LPN drop-
SELECT *
FROM apps.WIP_LPN_COMPLETIONS WLC,
apps.WMS_LICENSE_PLATE_NUMBERS LPN
WHERE WLC.ORGANIZATION_ID = 477
AND WLC.LPN_ID = LPN.LPN_ID
AND LPN.LPN_CONTEXT = 2
AND WIP_ENTITY_ID = :P ---your WIP_entity_id
-- Pending Material Transactions
SELECT *
FROM apps.MTL_MATERIAL_TRANSACTIONS_TEMP MMTT
WHERE ORGANIZATION_ID = 477
AND TRANSACTION_SOURCE_TYPE_ID = 5
AND TRANSACTION_TYPE_ID = 44 ---WIP ASSY COMPLETION
AND TRANSACTION_SOURCE_ID NOT IN
(SELECT TXN_SOURCE_ID
FROM apps.MTL_TXN_REQUEST_LINES
WHERE TXN_SOURCE_ID = MMTT.TRANSACTION_SOURCE_ID
AND ORGANIZATION_ID = MMTT.ORGANIZATION_ID
AND LINE_STATUS = 9)
AND TRANSACTION_SOURCE_ID = :P ---your WIP_entity_id
If you have records in this check then and try to manually drop the LPN into the destination subinventory.
HTH

Discrete job completion date on Sunday

Hi All,
I wanted to know how the discrete jobs completion date can be on Sunday when the manufacturing calendar days showing the Sunday as non-working days.
When calculating the completion date for those discrete jobs, it actually considering the item/part lead times.
As for example, an item # ABC has processing lead time as 2 days and the discrete job start time is on 29-JAN-2015 18:34:00 and has the completion date as 01-FEB-2015 19:35:00 (Sunday).
let me know if there any issue with any setup or profile options.
regards,
Subhasish

Hi,
We also had the same issue, the Workorder completion date and start date were including Non-working days.
"Why Discrete Jobs Form Is Not Computing Completion Date Based On Workday Calendar? [ID 1450120.1]"
The above metalink note might help you. All the resource on the assembly must be "Available 24 hrs" and make sure you have not inculded Saturdays and Sundays as a working day in you Manufacturing calendar (Assigned at org parameter).
Thanks, Sameet
Edited by: Sameet on Mar 11, 2013 11:58 AM

Component Pick Release for Partial Discrete Job Quantity

I'm on 12.0.6 and we currently do not use component pick release, but we are considering doing so.
My employer currently creates a single discrete job (say 120 items) and then completes that discrete job over several days. Say they plan to produce 30 a day over 4 days. Is there a way to use component pick release to release that partial quantity?
So if we have three shifts running and we want to produce 30 a day, 10 each shift. We want to run component pick release 3 times a day for four days, only releasing the components needed for 10 assemblies each time? Possible?
Is the only alternative to create 12 different Work Orders?

when the move order is created..update the allocation and then perform transact move order
ex if for 10 qty move order is created..but if u wish to issue 5 qty to the job..then update the allocation..for the remaining u can just backorder the move order
HTH
Mahendra

Discrete job is finishing with status 'Complete-No Charges'

Hi,
Some of our discrete jobs are getting completed with no charges. I wanted to know the name of API/Package which is changing/updating the status of job as 'Completed-No Charges'.
Regards,
Jaspreet Singh

Hi Jaspreet,
Normally once all the activities on the job were done, then the job status will get changed to complete. As per my knowledge, there is no API for changing the job status to "Complete-No changes". If you want this to be analyzed, please generate the FND logs by setting the following profile options and then try to re-produce the issue . Once the log is generated, then we can analyze the log.
1.Enable the INV and WIP profiles for debugging.
FND: Debug Log Filename = (Make sure this is null)
FND: Debug Log Enabled = Yes
FND: Debug Log Level = Statement
FND: Debug Log Module = WIP%
2. run the below query and take a note of the output
select max(log_sequence) from fnd_log_messages;
3. Finish the job
4. Once completed run the following sql script:
select message_text from fnd_log_messages where log_sequence> '&Log_seq received from step 2';
5. Upload the the SQL output (which you got from setp4) generated from the above sql script
Edited by: 813411 on Mar 28, 2012 7:43 PM

Why hasn't apple created its own USB or USB adapter for their products.? Since an iPhone or iPad make traveling and doing school work or on the job work, why not create a USB to make transferring information easier too.?

Why hasn't apple created its own USB or USB adapter for their products.? Since an iPhone or iPad make traveling and doing school work or on the job work, why not create a USB to make transferring information easier too.?

In some folks' version of the world, you have plenty of ways. YOu have the aforementioned services, you have iCloud, all you need is an internet connection and you're good to go. And that works perfectly...if you always have the internet.
If you want more non-internet dependant ways, then the best way to let Apple know is to send them feedback. They don't monitor or respond to this forum (Beyond removing rule breaking posts) but they do at least log feedback. However, the lack of a file manager will always be an obstacle. There are some apps out there that have at least a pseudo file manager - as in the ability to move documents into multiple other apps. I have Readdle Docs which I can use to download and move things around with, but again, back to the internet or wireless.

Print Jobs Show Complete But Do Not Print

Working with someone that has a MacBook Pro (10.4.11). Were connected to a networked HP-4250 LaserJet. Everyone else can print, when he shows his jobs have completed, but they do not actually print.
I've tried all the variants of Bonjour, IPP, HP JetDirect (deleting each time with multiple restarts), but we still can't get any print outs.
I can also ping the printer and actually log into the setup pages of the printer in Safari.
Recent changes that I'm guessing have something to do with it is that he recently removed HP Director (for All-In-Ones), but I still found some fragments files and folders that I deleted.
He also installed the new scan software for his new Brother's printer. Similar to the HP AIO software. But before I remove that software I'd like to make sure there isn't some other known issue going on. I'm pretty sure I've actually seen this before, but no clue on what the fix was.

Are the others on the network all PCs? Is it possible that the printer's "personality" is set to PCL? That would mean PCs could print, but not Macs (with the preinstalled postscript driver). Fix - set to Auto.
Also try Reset Printing System, then Add the printer again.

WIP over-completion increased component requirement qty

Hi all,
In normal situation, produce 1 product just 1 component. So that we create a discrete job in ebs to produce 1000 pcs of product and the component requirement qty is 1000 pcs.
However, in some cases, factory can produce more products based on this components.
To record the actual completion, we use 'Over-completion' and input 1011 pcs of product to complete.
The ebs system automatically change the component required qty = 1011 pcs. It makes factory seems need to procurement 11 pcs more to complete the production. (it also affect the MRP planning).
Please kindly advise how to fix it.
Best regards,
Laurie

Hi,
As mention "WIP over-completion increased component requirement qty" - yes, this is seeded functionality.
In Oracle, WIP Over completion qty is nothing but extra produced qty as per WIP job Qty. (ex. Job qty=10, total produced qty=12, i.e. 2 is over-completion qty)
Please explain expected requirement with example so that will figure out possible ways.
Thanks
ND

Hierarchies Job Failing The job process could not communicate with the dat

Hi Experts,
We have a group of hierarchies that run as a separate job on the DS schedules. The problem is this when we schedule the job to run during the production loads it fails but when we run immediately after it fails it runs completely fine. So it basically means that if i run it manually it runs but when its scheduled to run with the production job it fails. Now the interesting thing is If i schedule the job to run anytime after or before the production jobs are done. It works fine.
The error i get is
The job process could not communicate with the data flow <XXXXXX> process. For details, see previously logged
                                                           error <50406>.
Now this XXXXX DF has only Horizontal Flatenning and it does not run as separate process because if i have it has separate process it fails with an EOF . So i removed the run as separate process and changes the DF to use in memory .
Any Suggestion on this problem...

Thanks Mike.. I was hoping its a memory issue but the thing i don't understand is when the job is scheduled to run with the production job it fails. when i manually run the job during the production job it runs, this kinda baffles me.
DS 3.2 (Verison 12.2.0.0)
OS: GNU/LINUX
DF Cache Setting :- In Memory
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 26
model name      : Intel(R) Xeon(R) CPU           X5670 @ 2.93GHz
stepping        : 4
cpu MHz         : 2933.437
cache size      : 12288 KB
fpu             : yes
fpu_exception   : yes
cpuid level     : 11
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss syscall nx rdtscp lm constant_tsc ida nonstop_tsc arat pni ssse3 cx16 sse4_1 sse4_2 popcnt lahf_lm
bogomips        : 5866.87
clflush size    : 64
cache_alignment : 64
address sizes   : 40 bits physical, 48 bits virtual
power management: [8]
processor       : 1
vendor_id       : GenuineIntel
cpu family      : 6
model           : 26
model name      : Intel(R) Xeon(R) CPU           X5670 @ 2.93GHz
stepping        : 4
cpu MHz         : 2933.437
cache size      : 12288 KB
fpu             : yes
fpu_exception   : yes
cpuid level     : 11
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss syscall nx rdtscp lm constant_tsc ida nonstop_tsc arat pni ssse3 cx16 sse4_1 sse4_2 popcnt lahf_lm
bogomips        : 5866.87
clflush size    : 64
cache_alignment : 64
address sizes   : 40 bits physical, 48 bits virtual
power management: [8]
Thanks for your help

Splitting a background job over different application servers

I am running my program in the background and its taking long to complete. I have done some optimizations and it has greatly improved but still not running as fast as I want because its processing large amounts of data and the amount of time that I want all the data to be processed is little compared to the runtime of the program so now I want to split the background job over different application servers. Can someone tell me how do I go about doing that and example ABAP code will be greatly appreciated.
Many thanks

Hello, If you are interested in BANK_PP_JOBCTRL, here are some of the inputs. Its work very efficeintly, though you will have to investigate a little bit froom your end.
With in package bank_pp_jobctrl , you will find these FM. I have mentioned the use of it as well.
RBANK_PP_DEMO_GENERATE_DATA: To create the Business data for Parallel Processing.
RBANK_PP_DEMO_CREATE_PACKMAN: To create Packages out of the business data.
RBANK_PP_DEMO_START : To process data in parallel.
RBANK_PP_DEMO_RESTART: To re-process failed records during parallel Processing.
You will need to call above in your report program in the same sequence as shown above based on you requirement. I did used only first three.
TO generate events you will need to execute SE38: RBANK_PP_GENERATE_APPL to create application this will create the FM with numbers as shown below.
Events: This PPF automatically triggers various events during the execution of theStart Program. Each of this event is associated with a custom function module which contains the business logic.
For implementing this framework, at least the below mentioned methods should be implemented .
0205 – Create Package Templates : This method is used to write the logic for creating packages which in turn decides the data to be processed in parallel. This function module is called in loop at the loop ends only when the exporting parameter E_FLG_NO_PACKAGE has a value ‘X’ passed back to the Parallel processing framework.
1000 – Initialize Package :This method is the first step in processing a package. It fetches all the parameters required for the parallel processing to start. All the parameters are passed to this FM as importing parameters and it is the responsibility of this FM to save it in global parameters so that it can be utilized by Parallel processing framework.
1100 – Selection per Range : This method is used to read data for a package. The objects selected must be buffered in global data areas of the application for later processing. The package information is stored as interval in global parameters and this information is used to select the package specific data.
1200 – Selection for Known Object List: This method is used instead of method 1100 if it is a restart run. The objects to be processed are known already.
1300 – Edit Objects: The processing logic to be implemented using parallel processing for the selected objects is written in this method. This function module is used to implement the business logic and
Also, obiviously you would like to log your messages , so the framwrok provides macros to do it.
Let me know if you need some further help as I know there is very little information provided on this.
Regards/Ajay

The Adobe product that installed Media Encoder has not activated

My Adobe Media Encoder CS4 was working perfectly.
I even exported a video one morning and that same afternoon it refused and gave me the following message:
"Thank you for using Adobe Media Encoder CS4. The Adobe product that installed Media Encoder has not activated.
Please launch and activate that Adobe product before continuing to use Media Encoder"
I reinstalled a couple of times, but nothing changed.
I uninstalled and installed CS5, it launched once then gave me the same message all over again.
I even tried to install it on another computer and it's giving me the same result.
I have been working on this video more a month, and I can't even export it.
Can anyone help ? I have a deadline to meet
Thanks a lot

Hi, I've just been having the same problem but on my mac!
I have been trying to use XDCAM EX converted Mov files on my new MacBookPro with CS6. I have just completed the installation of ProRes Quictime codecs, but when I went back to try to re-open my Adobe Media Encoder, (that I was using without problem around an hour ago), I now get the same message that The-Jade was getting
"Thank you for using Adobe Media Encoder CS4. The Adobe product that installed Media Encoder has not activated.
Please launch and activate that Adobe product before continuing to use Media Encoder"
Any ideas?
Thanks,
JAK

Discrete Job Component Pick Release (SRS)

Hi All ,
For Push - Supply type , we can issue items to the job manually . Could any one brief purpose of Discrete Job Component Pick Release (SRS) in WIP
Thanks
Kiran

Hi,
Pls check if below MOS(metalink) note helps you:-
Move Order FAQ #2: Quantity Delivered vs Detailed in Move Order Lines (MTL_TXN_REQUEST_LINES) [ID 431479.1]
11i Move Order Transaction - FAQ [ID 114156.1]
Oracle Work in Process Product Documentation [ID 67009.1]
Also below discussion:-
http://kr.forums.oracle.com/forums/thread.jspa?threadID=951381&tstart=0
http://www.oracleug.com/user-guide/work-process/component-pick-release
Thanks,
JD

Work in process discrete jobs

I can't understand why is it possible in work in process(discrete jobs) to Move assemblies even if you haven't issued components to that job,it means that you can complete assemblies without issuing material why is that the case please clarify.

Sometimes you have shortages of a component and the component is such that it can be added to the assembly a little later.
The above functionality allows you to move past an operation so you can record that it was attempted/done partially.
But by keeping the material requirement open, you can keep track of what needs to be issued to the job once the onhand is available.
If your client does not want this to occur, you can either make the component operation pull or create a personalization /customization on the move screen that disallows the move if any push component is not issued.
A lot of companies manage this by creating reports that show unissued material. You can do that too.
Sandeep Gandhi

Production relief : Discrete job (over completion) not consume MPS Schedule

Similar Messages

Maybe you are looking for