Production Schedule Profile & shop floor paper printing.....

Hi there ,
               If we set the Execute Printing checkbox in the T-code <b>CORY</b>for a production scehedule profile....... then when we will release the order along with the other shop floor paper do the Transfer Order will also get printed if the material is warehouse managed.........
Please enlighten me .....
Thanks & Regards
Kaushik

Hi there ,
               Thanks for your reply...... I am aware of the fact that the shop floor paper will be printed once the order is relased & the relevant config is done in the Production schedule Profile.........
But in case of the material which are warehouse managed the Transfer requirement will be created & the further the Transfer Order........... I wan tto know that these will also Print the Transfer Order doucment for the warehouse managed material .......
Thanks & Regards
Kaushik

Similar Messages

  • Shop floor paper printing

    Hi Team,
    I am new to use the transaction OPK8. I need to configure to print production order details for shop floor paper printing.
    How to use this transaction to print shop floor papers as per our requirement?
    I need to print some BOM component details and kanban control cycle informations (eg: storage bin) in the shop floor papers. Is these informations available by default in OPK8 transaction?
    I am beginner to use this transaction. So your valuable guidenace required.
    Thanks
    psk

    Hi chandan
    Priniting layout can be set on your for printing shop floor paper. The required field can be set from production.
    Regards
    J . Saravan

  • Printing setting in Production Scheduling Profile

    Hello Guys,
    In Production Scheduling Profile (OPKP) there is a config setting "On Release" Execute Printing.
    I used this setting.
    But I could not print the production again.
    I want to re-print the production order.
    How do I enable re-printing the production order?
    Thanks
    George King

    Hi George,
    the setting simply define that the production order is printed when the order is released. This setting should not have any effect to reprint.
    Did you get any error? Are you able to print when you push the print button manually?
    Settings in OPK8 are correct ?
    Regards,
    Sabine

  • What is shop floor paper ?

    Hi,
    Can someone explain in simple statement what is meant by a Shop floor paper in PP module ? An abaper is expected to change its layout and users can print it. Which programs are involved in sapscript ? What kind of changes are normally expected in the shop floor layout ?Thru which transaction I can print and verify the shop floor papers (like PO thru ME21N).
    Would highly appreciate if u can answer straight rather than sending me links.
    thanks

    http://www.sap.com/industries/chemicals/pdf/BWP_SB_Manufacturing_Intelligence_Dashboards.pdf
    http://www.honeycombconnect.com/downloads/PILS/OTE/13_12_06WhitePaper.pdf
    Regards.

  • Production scheduling profile for production order type 10 does not exist – SAP Message No.10085

    When i tried to make confirmation for Production Order through CO15 transaction , i receive the following error message “ Production scheduling profile for production order type 10 does not exist – SAP Message No.10085 “
    In Work Scheduling view, Production Scheduling Profile is maintained as per OPKP only.
    How to check whether production scheduling profile is maintained for relevant order type 10.
    To do this , i went to OPKP & KOT2_OPA transactions but i don’t know how to check. I guide me through with a screen shot.
    Also, pls explain about  “Order Type 10” and how it is linked with material and order execution.
    Looking for a detailed explanation with screen shots , since i am new to SAP.
    Thanks With Regards,
    Dinesh Kumar V.

    Hello Dinesh,
    Please check the order type dependent parameter in OPL8 here you will get the Substitute Scheduler
    Then go to OPCH and check valid production scheduling profile assign here as per OPKP to your production scheduler for your plant.
    Production order have Order category as 10  Process Order  40 in standard SAP you can check this in OPJH.
    Best Regards,
    R.Brahmankar

  • Same material with diff. Production scheduler profiles

    Hi,
    I am working on PP-PI, where the same material is being manufactured using separate order types.
    To be  more specific, one order type for the  regular manufacturing & another  with Re-work order type. The  requirement is  such that the  Order type  dependent parameters & production scheduler profile are different in  both the cases. Since my master  has the prod. scheduler for  regular manufacturing on the material master, even if i select the  Re-work order type the system is considering the Settings of the  regular manufacturing order.
    I need to keep the production scheduler profile of the regular manufacturing order as a default in the material
    master due to various  reasons. At the same  time system should consider the  settings for Re-work order only when the specific order type is  manually selected during order creation.
    Appropriate solution would be of great  help, thanks in advance

    Hi,
    Try using user exit. change the production scheduler profile during order save  based on  the order type.
    check with your technical team.
    hope this helps.
    regards
    CSN

  • Production scheduling profile

    Dear Experts,
    Can i have multiple scheduling profile ?
    Issue is that i have defined Production scheduler A and production scheduling profile A1 in material master which refer to order type A2
    Now i want to create production order of same material with order type B2 with Scheduling profle B1 how can i do that without changing the master data in matrial master.
    I tried to give order type B2 in Co01 but it is refering Sch. Profile A1 only.
    Please help me to solve the issue.
    Amit

    Hi,
    I am unable to figure out from your query what you exactly need.
    But for a given material even though you have a prod. sched. profile maintained with a certain order type, you can create an order with different order type.
    If you're converting planned order to prod. order via co40 or co41, then system will propose the order type from the prod. sched. profile, this can be overwritten.
    However if you're manually creating via co01, then you can choose the order type you want, system will not prevent you from doing so, unless there is some enhancement in-place.
    So hope the above clarifies, if it does not, then please explain with an example, it would be better.
    Regards,
    Vivek

  • HOW TO CREATE PRODUCTION SCHEDULING PROFILE

    PLEASE
    TELL ME HOW TO CREATE PRODUCTION SCHEDULING PROFILE
    EXPLAIN IN STEPS
    THANKS

    Hi,
    Check the below link and the screen shot:
    http://wiki.sdn.sap.com/wiki/display/ERPLO/Production+Order+Type+Selection
    Hope it will help you.
    Regards,
    Alok Tiwari

  • Production scheduler & profile configuration

    Dear SAPper,
    When i create production order, the production scheduler is automatically flled (ex.101) and then
    the production scheduler profiles is automaticalled filled too.
    I don;t maintain production scheduler & production scheduler profile in work scheduling in material master?
    where did system pic thatt value??
    Best regards,
    Freddy Ha

    Hi,
    For your order type,
    Please check if in OPL8 "Assignment" area - "substitute scheduler" field is defined.
    This scheduler is picked up as default if not defined in material master.
    If a PSP is attached to this defualt scheduler in OPJ9, then that will also be picked up in the order.
    Hope this helps.
    Regards,
    Ashok

  • Production scheduling profile for production order type 10 does not exist

    Kindly suggest me how to resolve this error
    Production scheduling profile for production order type 10 does not exist

    Hi Archana,
    Go to material master-work scheduling view and check what is the production scheduling profile maintained for the same materisl -plant combination.
    then go to OPKP and check if production scheduliong profile is maintained for relevent order type 10 in custmizing. If not maintain one and it should resolve the error.

  • Difference mpr controller and production scheduling profile (exact)

    hi gurus
    wht is difference between mrp contoller and production scheduling profile. and which will come first at the time of planning.
    thanks in adavance
    avinash.pegarlawar

    Hi,
    MRP controller
    MRP Controller is the person responsible for a group of materials in MRP in a plant or company.
    Material that takes part in material requirements planning must be assigned to an MRP controller.
    Production scheduler
    Scheduler responsible for a material in production activity control.
    Example
    The production scheduler determines how capacity requirements are calculated for a material during a scheduling run.
    MRP Controller comes into Planning first which you need to assign in MRP-1 View in material master while production scheduler you need to assign iin Work Scheduling View in Material Master.
    Hope this helps clearing your doutb.
    Revert if still any query.
    Regards,
    Tejas

  • Incorrect sequence of shop floor paper after upgrade

    Hi All,
    We had an upgrade from 4.7 to ECC6 and we have a problem with shop paper printing for Production orders. The sequence of shop papers doesn't follow the sequence defined in configuration. e.g. Pick List gets printed before Operation list even though the configuration is otherwise.
    What could be the possible reasons and solutions for such an issue?
    Regards,
    Jibitesh

    All configurations are maintained properly in OPK8. The print program has been changed to SAPSprint.
    Possible reasons or troubleshooting tips would be helpful.
    Jibitesh

  • Status updation of Shop floor paper

    Hi expert
       I have created one Shop floor printout in Smart forms.i have created my own program.In the statndard printout
      status will be changed to PRT when the print out taken.I want to in coperate this feature in my program also.
    Please guide me
    Regards
    Manoj

    All configurations are maintained properly in OPK8. The print program has been changed to SAPSprint.
    Possible reasons or troubleshooting tips would be helpful.
    Jibitesh

  • In production scheduling profile(opkp)

    hi,
    in opkp, material availability check --- confirm available partial quantity.
    can any one tell me how it'll work in production(co01), what's the use of it.where it'll effect.
    thanks/regards
    vish

    When you have set this indicator, if only a partial quantity can be committed for one component, then only partial quantities will be committed for all components during an availability check.
    That means least committed components percentage set for all rest components.
    So that out of remaining quantity of rest components other orders can move ahead.
    Ex: Order Qty: 100 PC
    Required Compo Qty         Available Qty   %Availability
    200                                     200                   100%           
    100                                       40                     40%
    50                                         20                     40%
    B & C have only 40% of components availability so that A also allocated with 40% i.e. (80 qty)
    You can use 120 qty of A for rest orders.
    Chintan

  • Shop floor Printing

    I have made print setting in opk8 and it is working fine with one material , one order typeand one production order, where I can see preview of shop floor paper.
    But when i make production order with same material ,  order type and same plant. Then iam not able to get print privew (when i press print option in menu FUNCTION.
    I get message After the next update the order will be printed.

    In my question , I hav mentioned that for same plant, same material, same and same order type, for one production order I can view print preview in CO02, co04 serveral times
    But  for other prodcution order, for same plant, same material, same and same order type iam not able to see print preview  in co02 or co04. In that case, everytime i get message -After the next update the order will be printed

Maybe you are looking for