Production scheduling profile for production order type 10 does not exist – SAP Message No.10085

When i tried to make confirmation for Production Order through CO15 transaction , i receive the following error message “ Production scheduling profile for production order type 10 does not exist – SAP Message No.10085 “
In Work Scheduling view, Production Scheduling Profile is maintained as per OPKP only.
How to check whether production scheduling profile is maintained for relevant order type 10.
To do this , i went to OPKP & KOT2_OPA transactions but i don’t know how to check. I guide me through with a screen shot.
Also, pls explain about  “Order Type 10” and how it is linked with material and order execution.
Looking for a detailed explanation with screen shots , since i am new to SAP.
Thanks With Regards,
Dinesh Kumar V.

Hello Dinesh,
Please check the order type dependent parameter in OPL8 here you will get the Substitute Scheduler
Then go to OPCH and check valid production scheduling profile assign here as per OPKP to your production scheduler for your plant.
Production order have Order category as 10  Process Order  40 in standard SAP you can check this in OPJH.
Best Regards,
R.Brahmankar

Similar Messages

  • Production scheduling profile for production order type 10 does not exist

    Kindly suggest me how to resolve this error
    Production scheduling profile for production order type 10 does not exist

    Hi Archana,
    Go to material master-work scheduling view and check what is the production scheduling profile maintained for the same materisl -plant combination.
    then go to OPKP and check if production scheduliong profile is maintained for relevent order type 10 in custmizing. If not maintain one and it should resolve the error.

  • Item Conversion to GMD YIELD TYPE does not exist for  the item/items in this Recipe/Batch.

    Item Conversion to GMD YIELD TYPE does not exist for  the item/items in this Recipe/Batch. Cannot
    scale/create batch.
    While auto shipping the above error i am getting. Please somebody help on this.
    Thanks.

    Hi,
    Could you please let us know which Oracle Product was installed and it complete 5 digit version.
    Regards,
    Prakash.

  • Hierarchy for material types does not exist

    Hi,
    I am doing an intial configuration in SRM 7.0 we have actvated extended classic and PPS activated.
    In the first level of configuration ai heve set up the logical systems and the system landscape.
    when i am in R3AS
    DNL_CUST_BASIS3
    DNL_CUST_PROD0
    DNL_CUST_PROD1
    DNL_CUST_SRVMAS
    the above objects wre green when i executed
    For the object MATERIAL
    I am getting an error
    Hierarchy for material types does not exist
    Message no. COM_PRODUCT_API000
    Diagnosis
    Before materials are imported from the ERP system, the material types from the ERP system must exist as categories in CRM/EBP. When the Customizing object DNL_CUST_PROD1 is imported, the material types are imported automatically and created under the category MAT in the category hierarchy R3PRODSTYP (product subtype).
    Procedure
    Check whether the ERP system material types have been imported successfully and exist as categories.
    Proceed
    If necessary, import the Customizing object DNL_CUST_PROD1.
    Kindly guide me

    Hi,
    It looks you have not configured the middleware basic settings. Queue should be registered in SMQR transaction.
    Please follow the configuration guides in SAP Solution Manager or offline downloaded version in SAP Service Marketplace.
    http://service.sap.com/srm-inst
    Regards,
    Masa

  • R1: tcAPIException: Duplicate schedule item for a task that does not allow multiples.

    Hi,
    I'm struggling with the following task:
    I have to assure an account exists for a given resource. I do provision it with the .tcUserOperationsIntf.provisionObject().
    I've created a createUser task to create the account.
    The task code checks if there is already matching account.
    If no account exists, is is created in the disabled state, and the object state of OIM account is set to 'Disabled' by means of task return code mapping.
    If it exists, it is 'linked' to OIM account.
    The problem is if the existing account is enabled, I have to change the OIM account state to 'Enabled' either.
    To implement this (thanks, Kevin Pinski https://forums.oracle.com/thread/2564011 )) I've created an additional task 'Switch Enable' which is triggered by a special task return code. This task always succeeds, and its only side effect is switching the object status to 'Enabled'.
    By I've getting the 'Duplicate schedule item for a task that does not allow multiples' exception constantly:
    This is the stack trace:
    Thor.API.Exceptions.tcAPIException: Duplicate schedule item for a task that does not allow multiples.\
      at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.provisionObject(tcUserOperationsBean.java:2925)\
      at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.provisionObject(tcUserOperationsBean.java:2666)\
      at Thor.API.Operations.tcUserOperationsIntfEJB.provisionObjectx(Unknown Source)\
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)\
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)\
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)\
      at java.lang.reflect.Method.invoke(Method.java:601)\
      at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)\
      at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)\
      at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)\
      ...skipped
      at Thor.API.Operations.tcUserOperationsIntfDelegate.provisionObject(Unknown Source)\
      ... skipped
    What did I wrong?
    Regards,
    Vladimir

    Hi Vladimir,
    Please select 'Allow Multiple Instance' checkbox for the process task.
    Thanks,
    Pallavi

  • "Mass activity type does not exist" while i try to create a recording in SHDB for FPRW

    hi,
    i'm trying to create a recording in SHDB for transaction FPRW marking the checkbox "simulate background mode".  When i press the buttom "start recording" i recieve the error message >6 117  Mass activity type  does not exist.
    Does somebody know what can i do?
    thnaks

    On the right click on HD under video quality to filter it. 

  • Value Misc. Allowance for the flexfield segment Expense Type does not exist

    Dear All,
    can any budy help me out in Internet Expense modulee
    Error:- Value Misc. Allowance for the flexfield segment Expense Type does not exist in the value set OIE_EXPENSE_TYPES.
    Problem details:- we have define one expense templates " Relocation Expnse" under this we have define number of expense items ,in which Misc. Allowance is one
    Prevously it was end dated but now end date is removed , now when we are trying to claim expense against this item we are getting the above error.
    can you please tell me why this is happining and what is the solution.
    Regard
    Ajay Sharma

    Check these things
    1. you have enable PerPeriodOfService DFF to this set.
    2. you are setting Context Variable like (AttributeCategory) with requried value.
    Thanks

  • Sales order stock does not exists

    Dear All:
    I have created a sales order with reference to a quotation. the line item in sales order is also with reference to the quotation. and the stock has been assigned to that quotation. But while creating delivery, it is giving the error that sales order stock does not exist. my query is why sales order stock is required when the article is with reference to a quotation?? should not the stock be with reference to quotation??

    Hi,
    Check the Item Category of the Sales order which your using to create the delivery.In the item category confuguration VOV7 the special stock indicator 'E' may be assigned.So without a sales order stock assignement it will not allow you to create a delivery.
    GO to Mb1b for the Sales order using 412 E create a stock and see whether the delivery is created or not.If it is creating than that means the sales order stock has to be generated through your process.
    If production order confirms then it may generate a sales order stock in MTO scenario.If in your case it has to generated then you have to use MB1B trnasactio code or create your own customized program to create the sales order stock.
    Regards,
    Saju.s

  • Transaction type does not exist. Check entries

    Hello all,
    EBP 5.0, CCM 1.0, unicode
    When I try to log on different language than English and try to shop system is displaying two messages
    Internal number range is missing for transaction type. Inform syst. admin
    Transaction type does not exist. Check entries
    And I cannot see link for Procurement Catalog.
    All my customizing up to now was in English, due to the fact that SAP did not provide translation to Croatian (Latin-2 language).
    Also catalog call-up has locale "en" for the calling of catalog from EBP.
    Please give hint where I can start with debugging.
    Gordan

    Hello Yann,
    main problem, language files for CCM and EBP are not suppied from SAP yet. MY BC told me that they installed Croatian language in WAS, so system should behave as language is intalled fully and represent text in English when there is no translation.
    I cannot test other things because EBP will not go into the catalog due to the missing internal numbering for the transaction type. I checked BUS2121 in transaction types but nothing to be found.
    I was thinking that those two problems are related but this is not true. First I have to solve number range that check the catalog. Only common between those two problems is logon language.
    I even forced our special characters by entering them as UNICODE code and I can see them via catalog manager in english, but only for catalog items. Characteristics and product category names do not follow UNICODE specification.
    Confused
    Gordan

  • Sales order stock does not exist error during PGI

    dear sir,
    we have two plants 1010 and 1020,we are using variant configuration for our finished goods
    we want to make the sales orders in 1010 plant and we manufacture the machine in 1020 plant.
    so we want to dispatch machine from 1020 plant (shipping point),eventhough we make sale order in 1010 plant.
    but while doing PGI ,system shows one error message "Sales order stock does not exist" message 184,area M7.
    if we see in MMBE stock of finished good is available in 1020(made 412 E movement)
    how to resolve this
    thanks and regards
    srinivas pai

    There can be two reasons for these kind of error
    - Your sales doc while creating this order & your item category is marked with special stock indicator as E and after this order is created you have not reserved stocks in your plant against this order. This reservation can be done in tcode MB1B movement type 412 E.
    - Let say, if it is reserved then check the same in tcode MMBE stocks reserved for your sales order.
    Otherwise reservation you may have done properly with correct movement types with special stock indicator E. But while creating the your sales order with item category may not have been marked with special stock indicator E. In this case even though the system has stocks reserved for that order and that order when comes for PGI system doesn't sense.
    In either of the case, you have to again do the process.
    Hope it can assist you.
    Thanks & Regards
    JP

  • Purchase Order 4500000 does not exist

    When I am creating Service PO from shipment I am getting the error
    "Purchase order 4500000001  does not exist
    What can be the reason??????????
    Regards.

    Dear All,
    At last the problem has been resolved.
    There was an userexit assigned to the no.range table where the new doc.type was hardcoded to bypass the logic for allotting a PO Number and the problem was resolved.
    Since the problem has been resolved I am closing the thread.
    THANKS EVERYBODY FOR YOUR VALUABLE INPUTS AND SUGGESTION.
    Regards.

  • Text ID  for text object MATERIAL does not exist - MM01

    Hi All,
    I am getting below error message when trying to save Material Master in MM01.
    Text ID  for text object MATERIAL does not exist
    Message no. TD603
    Diagnosis
    You want to edit a text. However, the text ID (text type) of the specified text object does not exist.
    Procedure
    You can display a list of valid text IDs (text types) using F4=Possible entries. You can select the required text ID from this list with F2 or a double click.
    The valid text objects are listed in table TTXOB. The valid text IDs (text types) for an object are specified in table TTXID.
    I have searched the forums but couldn't get relevant message.
    Please assist.
    Thanks,
    Raj

    Hi Jurgen,
    This is the complete message i am getting.
    Text ID for text object MATERIAL does not exist
    Message no. TD603
    Diagnosis
    You want to edit a text. However, the text ID (text type) of the specified text object does not exist.
    Procedure
    You can display a list of valid text IDs (text types) using F4=Possible entries. You can select the required text ID from this list with F2 or a double click.
    The valid text objects are listed in table TTXOB. The valid text IDs (text types) for an object are specified in table TTXID.
    If I enter MM02 and without changing anything if i save still i get this error message.
    Thanks & Regards,
    Raj

  • CRM R12.0.6  Map Type does not exist in the value set

    Hi Everyone
    When attempting to access Service Request Types in our CRM UAT Release 12.0.6 environment an error message appears referring to 'Value General for the flexfield segment does not exist in the value set'.
    Checked the flexfields for the value set but did not set up a value for MAP_TYPES
    Checked our PROD environment but no value set up as above.
    Currently in progress of mapping service requests to responsibilites in UAT, could this be the cause and how to resolve? No mapping as yet for service requests set up in PROD. Has anyone else experienced this?
    Thanks very much, Louise

    Hi IWolbers,
    >>I have a recurring problem where all of a sudden I can no longer see the values of my variables when I debug my unit tests. I cannot find a pattern as to when this happens but I experience this across one of every 20 tests that I write. Occasionally
    this has also happened during normal debbuging of running code on my machine.
    So you mean that it worked well before, am I right? 
    If you debug the same app in other VS machine, does it work well? So we could make sure that whether it is related to the VS IDE.
    Please disable all add-ins in your VS IDE, and then reset your VS settings, debug it again.
    https://msdn.microsoft.com/en-us/library/ms247075(v=vs.100).aspx
    Or you could run your VS in safe mode, debug it again, at least, we could know that whether it is the add-in's issue.
    https://msdn.microsoft.com/en-us/library/ms241278.aspx
    To make sure that it is not the project files' issue, create a new blank solution, copy the project files to the new solution, clean and rebuild the solution, check the result.
    >>Once I step over this to the next line (screen shot 2) I get the error message 'The name '[variable name]' does not exist in the current context'
    How about debugging it with "Step Into" instead of "Step Over"? Or you could add breakpoints between 234 line to 241 line, after the breakpoint is hit, check the watch window again. How about the result?
    In addition, do you check other debugger window like local or others?
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Error DDIC Type does not exist

    Hi All:
    I got the following error in my CAF application:
       com.sap.caf.rt.exception.CAFBaseRuntimeException: DDIC type does not exist: com.agile.pmg.simpletypes.tp_proposal
    The problem is that this type already exist in the dictionary, and I don´t know what is the problem.
    Any ideas?
    regards

    The Base is ECC 6.0 not yet upgraded to EHP
    Anyways SAP has helped solve the problem.
    Below is the solution :
    3. You can use program ABADRCHECK to analyze the inconsistencies in the derivation. By selecting the checkbox 'DELSTEPS', you can automatically delete the steps recognized as inconsistent. Check the result carefully before you set this parameter. The check should always occur for all clients, that is, the checkbox 'ALLCLNTS' should remain selected.
    HOW TO FIX CURRENT CLIENT COPY
    (All steps to be performed in target logical system)
    1. Decrease workload as much as possible
    2. Execute report ABADRCHECK with selected 'DELSTEPS'
    (see note 653314 for more details) -- Check point 3 above.
    3. Execute TCode FINB_TR_EXEC_AI (Postprocessing of Client Copy)   (Please note that any changes done between Client Copy and          executing TCode FINB_TR_EXEC_AI will be overwritten!)
    4. Result of FINB_TR_EXEC_AI execution
    a) Executed with same error DA 300
    The workload is still to high, make sure that workload is decreased and repeat steps 1. - 3.
    b) Executed without any errors
    Consider FINB-TR-DERIVATION part of Client Copy as completed successfully. Note, that status of Client Copy in TCode SCC3 "Post-Processing Required" is final and it's not updated based on successful execution of FINB_TR_EXEC_AI.
    Information about final Client Copy status need to be evaluated and kept outside of SAP system. Or optionally, the client can be protected against any further manually triggered post processing procedure (e.g. using TCodes FINB_TR_EXEC_AI, FINB_TR_DISPLAY etc.) using the IMG activity "Complete Postprocessing". It's suggested to do so, when Client Copy is successfully repaired by repetitive execution of post processing procedure.
    WHAT TO DO BEFORE NEXT CLIENT COPY
    Make sure that there will be no performance issues during Client Copy processing in target logical system.

  • "Basic Type Does Not Exist"

    I am currently working on BI 7.0 .On trying to activate Source system and the system is giving me following error
    <b>"Basic Type Does Not Exist"</b>
    the source system is BI system(for transfer from ODS to Infocube).
    Please provide path forward.

    Hi,
    Seems like the ale ports and idoc aggreements are not ok within the source system setup. Rightclick on the source system and run the restore option. This will correct these errors for you. If this does not work check these:
    184322 Procedure after DB copy of BW source systems
    886102 System Landscape Copy for SAP BW 2.X, 3.X and NW2004s BI
    325470 Activities after client copy in BW source systems
    325525 Copying and renaming systems in a BW environment
    184754 Procedure after BW database copy
    184447 Building a BW-system landscape
    184971 Notes on BW source system connections
    140276 Error in source system assignment
    524554 Storing destinations in the BW environment
    538052 Maintenance of Myself destination in BW
    Regards, Patrick Rieken.
    Message was edited by:
            Patrick Rieken - BI-Formance B.V.

Maybe you are looking for