Production Scheduling tool

Can anyone let me know, which is the best production scheduling tool (bolt-on/in built) which can be integrated with 11.5.10 ver.
Thanks,

Can someone help me on this

Similar Messages

Difference bet ween Fleet Object and Production Resource Tools

Hi all,
Please give me the difference between Fleet Object and Production Resource Tools in Plant Maintenance
Thanks in Advance
Thanks,
shriraam

Dear,
Production Resources/Tools (PRT)
Unlike machines and fixed assets, production resources and tools (PRTs) are movable (not stationary) operating resources that are required to perform an activity and can be used repeatedly. For example, PRTs include documents, engineering drawings, jigs and fixtures, and measurement instruments.
Fleet Management
Here can map the vehicles as equipment master records and enter vehicle-specific additional data, which is displayed in the system on two additional tab pages. This means that you can now specify important fleet data such as the license plate number, load volume, consumption data, fuel card number, engine data, or fuel type and so on directly in the equipment master record.
You can also perform maintenance planning for a fleet object. You can make the date of the next scheduled service dependent on the distance
Please refer this link,
[Link|http://www.nd-solutions.com/pdfs/white_EAM/EAM_ConfiguringFleetMgt.pdf]
Regards,
R.Brahmankar

Operation wise Production Scheduling Graphical Report

Dear Expert ,
I have multiple production orders and each operations have schedule start date and finsihe date .My client wants a graphical bar chart or grarate chart of production oreds , operations schedule based on vaious work centers after doing capacity leveling in CM21 graphical view so that every week we can production manager can send the concern people those production schedule to SFC.
Is there any functionality or SAP reporting tools are available in this requirement ? I have tried in CM21 --print - chart2 which is giving me order pool before operation despatch ..I am not able to get the same chart2 after order-operation dispatch .
Regard
JH

Hi ,
I did not able to find out anY sap standard report of this requirement .
How ever , I have developed an functional specification to make a custom report based on COOIS and CM21.User will carry out work centre , operation and production order wise scheduling(Operation dispatch , overload checking and scheduling ) in CM21 and same will be captured in custom developed report based on COOIS.This can have an graphical chat in PDF or excell as per business requirement to send the concern production department as reference .
As there is client policy of data protection , I am not able to share details about this report .
Regards
JH

From Which table Production resource/tool number can be retried

Hi Friends,
In SAP Query I am Using MAPL,PLAS, PLPO, PLKO, I want to retrieve Production resource/tool number PLFHD-FHMNR, can any one tell in which table it is storing the value.. & what link condition I need to use to retrieve thisfield.. Transaction CA03.
Thanks,
Ravi.

FHMNR is stored in table ADFSH_PRTHEAD. You may need to pass ORGEH - Org. Unit to get the Production resource/tool number.
This may help you.
Regards
Karthik D
P.S. May i know why you have mentioned FHMNR in all your answered questions today?

Creating/Copying a Work Centre,also a Production Scheduler and Cost Centre.

Hi All,
I am trying to create a new work centre based on the settings of a previous one? First of all,how I can do this?
Secondly,after I have created the new work centre (having copied being copied from another),I need to create a new production Scheduler and Cost Centre? How I will be able to do so,also?Will the Production Scheduller and Cost Centre assignments fom the old work centre be copied,too,or I will need to create/copy these from scratch?
All help greatly appreciated,will award points to all useful answers.
PAPJ1.
Edited by: PAPJ1 on May 20, 2011 11:01 AM

Hello,
You can create a new work center by copying an existing work center. in the cr01 screen in the copy from column put the plant name and Ref. work center name and put enter. all the existing data will be copied to the newly created work center. no need to create new assignment to Production Scheduller and Cost Center.
Hope it helps.
Regards
Alok

Production schedule report/Standard v/s actual report

Dear experts,
Need two standard report for
1) Production schedule report- production during the perion and their cost component and items break up
2) Standard v/s actual report - Standard defined for material and actually consumed in term of qty and Cost for material and production order.
regards
RR

Hi ajay,
Thanks for your valuable advice,
I did all the changes mentioned in thread.
Cost component wise production target cost and actual cost is coming.
Same way i did it for qty.but my actual qty of production order is not coming but input qty is coming.
Option selected for output qty and same is not coming in report
key figure-output qty
value type-4actual
version-770IVERS
Option selected for input qty and qty is coming in reports also
key figure-input qty
value type-5target
target cost version-790SVERS
Need to ask one more question,Shall i create separate cost component for FG cogm a/c?.my fg cogm and settlement a/c is same.
and also how to extract all data(cost component wise) in excel for all orderwise/material wise
reards
RR

MATERIAL TYPE : Production resource/Tool...

Hi...
MATERIAL TYPE : PRODUCTION RESOURCE/TOOL.
Friends..i want to know about the above material .and its uses..generally i heared that this type of materials mostly used in manufacturing industries...if i want to configure this in which way i can configure..and let me know brief about material (production resource/tool..)
(or)
plz share with me your experience about this type of material and its configurations..
It will be verry helpfull to me..
Regards,
Sirish

Hello,
Please go through this documentation:
http://help.sap.com/printdocu/core/print46c/en/data/pdf/PSPRT/PSPRT.pdf
Prase

Documents to be linked from DMS to Production Resource Tools

hi, All
I want to Link some documents to PRT through DMS.
From DMS i choosed object link Production resourec/tools.
I searhed PR/T no result found.
So Now i want to Know that How i could Creat PRT and Link some document to PRT.
Any one help me
Rgds,
Ben

Hi,
I know this post is old, but to answer the question:
Yes, you can link, using Object Linking functionality in DMS, to a PRT.
The object is a bit obscure in the object list, but, when selecting a object in the DMS Config>Define Document Type>Define Object Link, look for the object called CRVS_B.
This is the PRT Object Link's definition, which will then allow Object Linking functionality as required.
The other way, as mentioned earlier, is to simply use the PRT functionality from your transaction, i.e. IA06 to link to a DIR. This has the downside though that the bi-directional navigation from DMS<>PM for example will not exist.
Regards,
Freddie.

Production scheduling profile for production order type 10 does not exist – SAP Message No.10085

When i tried to make confirmation for Production Order through CO15 transaction , i receive the following error message “ Production scheduling profile for production order type 10 does not exist – SAP Message No.10085 “
In Work Scheduling view, Production Scheduling Profile is maintained as per OPKP only.
How to check whether production scheduling profile is maintained for relevant order type 10.
To do this , i went to OPKP & KOT2_OPA transactions but i don’t know how to check. I guide me through with a screen shot.
Also, pls explain about “Order Type 10” and how it is linked with material and order execution.
Looking for a detailed explanation with screen shots , since i am new to SAP.
Thanks With Regards,
Dinesh Kumar V.

Hello Dinesh,
Please check the order type dependent parameter in OPL8 here you will get the Substitute Scheduler
Then go to OPCH and check valid production scheduling profile assign here as per OPKP to your production scheduler for your plant.
Production order have Order category as 10 Process Order 40 in standard SAP you can check this in OPJH.
Best Regards,
R.Brahmankar

Printing setting in Production Scheduling Profile

Hello Guys,
In Production Scheduling Profile (OPKP) there is a config setting "On Release" Execute Printing.
I used this setting.
But I could not print the production again.
I want to re-print the production order.
How do I enable re-printing the production order?
Thanks
George King

Hi George,
the setting simply define that the production order is printed when the order is released. This setting should not have any effect to reprint.
Did you get any error? Are you able to print when you push the print button manually?
Settings in OPK8 are correct ?
Regards,
Sabine

IA07 : Key for Task List Group and Production resource tool number link

HI abapers,
In IA07 TCODE , i want to retrieve Key for Task List Group( PLNNR ) and Production resource tool number ( FHMNR) .
In technical settings for both the feilds, structure names are mentioned.
Is there any function module or table link to retrieve both .
thansk & regards
Raghul

Hi Raghul,
i am also facing the same issue. Kindly let me know if u get any solution for this.
Thanks in advance.
-AruN.

Same material with diff. Production scheduler profiles

Hi,
I am working on PP-PI, where the same material is being manufactured using separate order types.
To be more specific, one order type for the regular manufacturing & another with Re-work order type. The requirement is such that the Order type dependent parameters & production scheduler profile are different in both the cases. Since my master has the prod. scheduler for regular manufacturing on the material master, even if i select the Re-work order type the system is considering the Settings of the regular manufacturing order.
I need to keep the production scheduler profile of the regular manufacturing order as a default in the material
master due to various reasons. At the same time system should consider the settings for Re-work order only when the specific order type is manually selected during order creation.
Appropriate solution would be of great help, thanks in advance

Hi,
Try using user exit. change the production scheduler profile during order save based on the order type.
check with your technical team.
hope this helps.
regards
CSN

Process Chains and 3rd party scheduling tools in 04s

All,
What, if any, 3rd party scheduling tools (Autosys, CTL-M, etc...) deliver certified connectivity with 04s BW? I've had some experience with 3.x in prior lives in having to support a custom abap pgm to submit and monitor process chains via SM37. Has the integration with 3rd party tools changed? If we need to connect with a 3rd party tool, is a custom 'wrapper pgm' still required?
Thanks,

Hi Lonnie,
SAP NetWeaver 2004s comes with the external scheduling tool Redwood Cronacle included. In the next release it will be integral part of the NetWeaver system.
Please check the SAP Service Marketplace for further information
<a href="http://service.sap.com/job-scheduling">SAP Service Marketplace /job-scheduling</a>
Cheers
SAP NetWeaver BI Organsation

Scheduling Process flows in scheduling tool Control M

Hi,
We need to schedule 3 to 4 process flows through the general scheduling tool "Control M". So how do we do this? I mean where should we login to run the OWB jobs (Process Flows) through Control M.
Any help will be appreciated.
Thanks,
Harsha

Create a shell script that will take in the required parameters you need (i.e.connection User/pwd@SID and OWB mapping inputs if required), which call sqlplus with a procedure that will run your workflow.
My current client migrates all OWB incl Worflows created through OWB by the means of export. This is why the prefix of the workflow activity will differ from an environment from another.
Here is a procedure that will launch the OWF and wait for the workflow to be completed before it exits and return control to CONTROL-M.
CREATE OR REPLACE PROCEDURE XX_OWF_Daily_Load (
ATTR01 IN VARCHAR2(10),
ATTR02 IN VARCHAR2(10),
ATTR03 IN VARCHAR2(10),
ATTR04 IN VARCHAR2(10),
ATTR05 IN VARCHAR2)
IS
v_ITEM_KEY VARCHAR2(40);
v_PREFIX VARCHAR2(4);
v_ITEM_TYPE VARCHAR2(8):= 'MY_ITEM';
v_PROCESS VARCHAR2(32):='MY_ITEM_KEY';
/*Mapping Inputs for OWB */
v_ATTRIBUTETXT01 VARCHAR2(1):='ATTR01';
v_ATTRIBUTETXT02 VARCHAR2(1):='ATTR02';
v_ATTRIBUTETXT03 VARCHAR2(1):='ATTR03';
v_ATTRIBUTETXT04 VARCHAR2(1):='ATTR04';
v_ATTRIBUTETXT05 VARCHAR2(1):='ATTR01';
v_STATUS VARCHAR2(30):='RUNNING';
BEGIN
/* Generate a unique key */
SELECT 'DAILY_PROCESS'||TO_CHAR(SYSDATE,'YYYYMMDD:HH24MI') INTO v_ITEM_KEY FROM DUAL;
SELECT TRIM(TEXT_DEFAULT)||'_' INTO v_PREFIX
FROM WF_ACTIVITY_ATTRIBUTES_VL
WHERE
ACTIVITY_ITEM_TYPE = 'MY_ITEM'
AND ACTIVITY_NAME = 'MY_ITEM_KEY'
AND NAME = 'SYS:TLA';
/* Creating the Workflow Process */
Wf_Engine.createprocess(ItemType => v_ITEM_TYPE,
ItemKey => v_ITEM_KEY,
process => v_PROCESS);
/* Setting all required attributes for the Workflow Process */
Wf_Engine.SETITEMATTRTEXT(ItemType => v_ITEM_TYPE,
ItemKey => v_ITEM_KEY,
AName => v_PREFIX || 'LOAD_WORKAREA_POLICY',
                              AValue => v_ATTRIBUTETXT01);
Wf_Engine.SETITEMATTRTEXT(ItemType => v_ITEM_TYPE,
ItemKey => v_ITEM_KEY,
AName => v_PREFIX || 'LOAD_WORKAREA_TR_POLICY',
                              AValue => v_ATTRIBUTETXT02);
Wf_Engine.SETITEMATTRTEXT(ItemType => v_ITEM_TYPE,
ItemKey => v_ITEM_KEY,
AName => v_PREFIX || 'LOAD_USER_DIM',
                              AValue => v_LOAD_USER_DIM);
Wf_Engine.SETITEMATTRTEXT(ItemType => v_ITEM_TYPE,
ItemKey => v_ITEM_KEY,
AName => v_PREFIX || 'LOAD_VEHICLE_DIM',
                              AValue => v_ATTRIBUTETXT05);
Wf_Engine.setitemowner(ItemType => v_ITEM_TYPE,
ItemKey => v_ITEM_KEY,
Owner => 'OWF_MGR');
/* Starting the Workflow Process */
Wf_Engine.startprocess (itemtype => v_ITEM_TYPE,
itemkey => v_ITEM_KEY);
WHILE (v_status <> 'COMPLETED')
LOOP
SELECT ACTIVITY_STATUS INTO v_status
     FROM WF_ITEM_ACTIVITY_STATUSES
WHERE ITEM_TYPE='MY_ITEM' AND ITEM_KEY=v_ITEM_KEY;
SYS.DBMS_LOCK.SLEEP(600);
END LOOP;
END;
/

Production scheduling profile

Dear Experts,
Can i have multiple scheduling profile ?
Issue is that i have defined Production scheduler A and production scheduling profile A1 in material master which refer to order type A2
Now i want to create production order of same material with order type B2 with Scheduling profle B1 how can i do that without changing the master data in matrial master.
I tried to give order type B2 in Co01 but it is refering Sch. Profile A1 only.
Please help me to solve the issue.
Amit

Hi,
I am unable to figure out from your query what you exactly need.
But for a given material even though you have a prod. sched. profile maintained with a certain order type, you can create an order with different order type.
If you're converting planned order to prod. order via co40 or co41, then system will propose the order type from the prod. sched. profile, this can be overwritten.
However if you're manually creating via co01, then you can choose the order type you want, system will not prevent you from doing so, unless there is some enhancement in-place.
So hope the above clarifies, if it does not, then please explain with an example, it would be better.
Regards,
Vivek

Production Scheduling tool

Similar Messages

Maybe you are looking for