Production Server Restarted

Hi,
   Yesterday production system restarted automatically,this first time happened.here iam sending the stopdb.log.
LOGFILE FOR STOPPING DATABASE
Trying to stop database ...
Thu May 13 10:05:42 IST 2010
Checking required environment variables
SAPSYSTEMNAME is >TSD<
Stop database with xuserkey >c<
Thu May 13 10:05:42 IST 2010
Connect to the database to check the database state:
dbmcli check finished with return code: 0
Database is running
Continue with stop procedure
Thu May 13 10:05:43 IST 2010
Stop Database Analyzer
Database Analyzer is active (INFO 13): wc=1
dbmcli (dban_stop) finished with return code: 0
Thu May 13 10:05:49 IST 2010
Check connected user on database system
Thu May 13 10:05:50 IST 2010
Stopping the database
Shutdown Database...
OK
OK
Thu May 13 10:06:01 IST 2010
Connect to the database to check the database state:
dbmcli check finished with return code: 0
The database state is offline.
TSD database stopped
What may be the iam not understanding guide me for the sane to analyze.
Thnaku

Dear Harshit,
Kindly let me know your OS ?
I think system  had been rebooted.Kindly check OS level logs .
Thanks and Regards,
ARun
Edited by: Arun Kumar Rathour on May 14, 2010 12:36 PM

Similar Messages

  • Production server restarted automatically

    Hi ,
    I am new to the production enviorment .
    Our production server restarted automatically ,i am unable to find out the reason.
    Where we can see the log for cause of restart .
    IN SAP SERVER/OPERATING SYSTEM LEVEL .
    Ths is on  very urgent basis
    Hoping earliest response.
    Thanks in advance .
    RohitK
    <b></b>
    Message was edited by:
            Rohit Kawankar

    Hi Manoj,
    Thanks for your reply ,
    My current configuration is ecc 5 ,oracle 9i ,win2k3 .
    I had checked in sm21 ,but i did not found anything related to restart of server .
    What are all checks where i can find the log to analysis the problem.
    Thanx & Regards
    RohitK

  • PI 7.0 Production server restarts automatically

    Hi guys,
    We have installed and configured correctly a PI 7.0 system on Windows 2003 Standard Edition X64-bit with SQL Server 2005. We are on SP12. Everything, SLD, RFC connections work properly.
    The problem is that 4-5 days after the installation the Windows Server restarts automatically in unexpected time during the day (unexpected shutdown), even when anybody doesn't do anything in the system. In the Event Viewer we get the following message/error "System Error: Category 102 EventID 1003". There are no other messages/errors.
    This is a production system and we are supposed to go live within the next days! So I need your help ASAP.
    Any ideas?
    Thank you.
    Best Regards.
    Evaggelos

    1) update your network card drivers to the latest  and for all devices including your motherboard chipset drivers.
    2) Are you using  ethernet instead of USB?
    3) This URL  might help you
    http://www.pcreview.co.uk/forums/thread-1885463.php
    Regards
    Sangeetha

  • Restart Workflow after error in Production Server.

    Hi Experts,
                     We had a Problem in PO Release in production Server no we have set the release strategy again.
    1)Can i Restart the Workflows from that date so that the PO which where in error will work with the new release strategy ?
    2) T code to Restart WF after Error is SWPR Right ? or should i Use SWPC
    3) Please tell me where to find WorkItem ID
    Regards,
    Hari

    Hi,
    if you know for what Key id you had wflow errored out, you can find it. FOr example, any invoice, Notification, etc., go to that document or notification, and click on the "Services for Obj" icon and go to workflow--->wflow over view. THis is how you get to the wflow log. And in that, youcan choose the Technical Details view which gives you the witem id.
    Instead, you can use SWI6 and give the BO and exact key and you will get to wflow log..Or you can use Txn SWI2_DIAG..
    Hope this helps
    venu

  • Web Dynpro Application Deployment need server restart?

    Hi Everyone,
    When deploying Web Dynpro application on production environment, do we need to restart the sap portal system and server?
    I have this issue that when ever we deployed new develop Web Dynpro application with new Abap Function module we need to restart our Enterprise portal production server. Is this really necessary. Is there other way to deploy Web Dynpro application with new Abap function module without restarting the server.
    Please help,
    Michael Mondelo

    Hi michel,
    for example , assume you imported a RFC bapi_flights from r/3 to webdynpro dc , and both rfc requests and webdynpro application is deployed to the development server and then moved to quality server.
    now you have done some changes in the rfc bapi_flights i  mean change in the structure .
    case 1 : now with out reimporting the change to webdynpro application and you move the request to the quality r/3, your application dumps . because the structure change is not incorporated at your webdynpro DC.
    case 2 : you have re imported the rfc incorporating the changes to the web dynpro applicaiton dc, now with out moving the structure changes request to the quality r/3 and you deploy the webdynpro Dc having the changes to your quality EP , still the applicaiton dumps because your appliction refers to the rfc with out structure change in quality r/3.
    case 3 : you have moved the abap request having the strucutre change and also the webdynpro development component where the changes are also incorporated , now on moving both , your application might dump , because the meta data cache might have been not updated with the new structure change in the quality ep server. so you have invalidate the cache in the JCos you have used to import the rfc. or else on restarting the EP server , the new structure change will be updated in the server.
    most of the cases  Invalidation of cache works and in some cases you have restart the server fo the changes to update.
    Regards
    Govardan Raj

  • My production server is getting restated

    Dear All,
    I am facing problem in my production server is getting restated form yesterday and cant find any error just a mail form server
    HpEventLog: Watchdog timer expired - hard reset (2E0H)
    The system has detected the following event:
    SNMP Trap:         736
    Date time:         06/09/2009  01:14:54 PM
    Computer:    
    Source:            HpEventLog
    Type:              Error
    Category:          (0)
    Description:
    Watchdog timer expired, and a hard reset of the system occurred. Some process took longer than it should. Identify that process and contact  the vendor of that application.
    Details:
    For more details, look at the System Event Log.
    But today also my only Sap application got restated not the database and there are the error log
    By this error log  a have face this problem  that time  if I restart the server than the problem will not come for 12 to 15 hr than again SM21 I am getting this error and the ABAP dumps and then work process will stop .
    If there is no one to restart the server (In nigth) than the error come for 1 to 2hr than restart the sap application by automatily
    After apply the latest kernel patch it is solve but not aging I am getting the problem.
    We are using ecc5 ,oracle 9i on win2003
    SM21 Log
        Q02 Stop Workproc 0, PID 464
        BY2 Database error 12560 at CON
        BY0 > ORA-12560: TNS:protocol adapter error
        BY2 Database error 12560 at CON
        BY0 > ORA-12560: TNS:protocol adapter error
        R19 Initialization DB-Connect Failed, Return Code 000256
        Q02 Stop Workproc 9, PID 5980
    trc file: "dev_w0", trc level: 1, release: "640"
    B 
    B Sat Jun 13 08:09:58 2009
    B  create_con (con_name=R/3)
    B  Loading DB library 'G:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' ...
    B  Library 'G:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' loaded
    B  Version of 'G:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.220)
    B  New connection 0 created
    M sysno      00
    M sid        PRD
    M systemid   561 (PC with Windows NT)
    M relno      6400
    M patchlevel 0
    M patchno    247
    M intno      20020600
    M make:      multithreaded, Unicode, 64 bit
    M pid        3444
    M
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3444) [dpxxdisp.c   1170]
    I  MtxInit: -2 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M 
    M Sat Jun 13 08:10:01 2009
    M  calling db_connect ...
    C  Prepending E:\oracle\ora92 to Path.
    C  got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
    C  Client NLS settings: AMERICAN_AMERICA.UTF8
    C  Logon as OPS$-user to get SAPPRD's password
    C  Connecting as /@PRD on connection 0 (nls_hdl 0) ... (dbsl 640 070308)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 UTF8                                                      1 000000000FABC010 000000000D0CF8F0 000000000D0CF228
    C  Attaching to DB Server PRD (con_hdl=0,svchp=000000000D0CF0F8,srvhp=000000000FADD708)
    C 
    C Sat Jun 13 08:10:16 2009
    C  *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12560
    [dboci.c      4289]
    C  *** ERROR => CONNECT failed with sql error '12560'
    [dbsloci.c    11395]
    C  Try to connect with default password
    C  Connecting as SAPPRD/<pwd>@PRD on connection 0 (nls_hdl 0) ... (dbsl 640 070308)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 UTF8                                                      1 000000000FABC010 000000000D0CF8F0 000000000D0CF228
    C  Detaching from DB Server (con_hdl=0,svchp=000000000D0CF0F8,srvhp=000000000FADD708)
    C  Attaching to DB Server PRD (con_hdl=0,svchp=000000000D0CF0F8,srvhp=000000000FADD708)
    C 
    C Sat Jun 13 08:10:31 2009
    *C  *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12560*
    [dboci.c      4289]
    *C  *** ERROR => CONNECT failed with sql error '12560'*
    [dbsloci.c    11395]
    *B  **LOG BY2=> sql error 12560  performing CON [dbsh#3 @ 1204] [dbsh    1204 ]
    *B  **LOG BY0=> ORA-12560: TNS:protocol adapter error [dbsh#3 @ 1204] [dbsh    1204 ]
    *B  **LOG BY2=> sql error 12560  performing CON [dblink#3 @ 428] [dblink  0428 ]
    *B  **LOG BY0=> ORA-12560: TNS:protocol adapter error [dblink#3 @ 428] [dblink  0428 ]
    *M  **LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c   1283]
    M  in_ThErrHandle: 1
    *M  *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   9708]*
    M 
    Regards,
    Edited by: kumarmoh on Jun 13, 2009 1:36 PM

    Thanks all, when i try LSNRCTL i am getting the error
    LSNRCTL> status
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=#####)(PORT=1521))
    TNS-12560: TNS:protocol adapter error
    TNS-00530: Protocol adapter error
      64-bit Windows Error: 55: Unknown error
    But if stop the database from oracle failsafe manager and restart the server than the problem is solve fo only 10 to 12 hr that again the same problem came.  Please suggest
    Regards,

  • Missing data after server restart

    Hi,
    We restarted our MDM server at the OS level last night. Everything seemed okay after the restart. However, when our users came in this morning, they found that some data was missing from a table. We have a Material repository with 3 main tables. Some data which have previously been populated was not appearing in our Products Detail table, the largest of the three. A large number of rows in the table had columns that failed to load with data on the repository auto-start that occured after the server restart. The auto start value in the mds.ini file was set at 300 (5 minutes) as we had seen this iisue happen once before, and thought that may help.
    A stop and restart of the repository corrected the issue. Is there anything we could have done to prevent this? Is it worthwhile to try increasing the auto start delay again? Validating detail data after every server restart is not an effective option.  
    MDM version: 7.1 SP08
    OS: AIX  DB: Oracle 11g
    Thanks!
    Dave

    Hi Dave,
    I meant that when you load repository using Immediate data is loaded from .acl files (accelerator files) in a async manner.
    Whereas when you load by Update Indices new acl files are generated.
    Below men6tioned is a comparision between the 2 ways of laoding repository:
    Load Repository Immediate
    o Loads indexes from accelerator files instead of being regenerated by reading the data them from the DB and creating the index.
    o Automatically builds indexes stored in out-of-date accelerator files.
    o Is usually fast.
     Load Repository with Update Indices
    o Rebuilds all MDM indexes files by reading and indexing data stored in the DB. The results are flushed on disk as accelerator files.
    o Necessary by repository schema changes or if any error occurs.
    o Might take significant amount of time to complete.
    So when you observe some visual data impact in your repository it is good idea to rebuild indexes.
    I guess we cannot schedule this as default behavior is to load by immediate even through the inin parameter.
    as a best practice one can do this by fixing a time frame eg monthly depending on data/schema changes.
    Thanks,
    Ravi

  • JDBC production server issue

    Hello All,
    We have four J2EE engine in productions and we have created JDBC connections on two of those. Both sever JDBC connection failed saying DataSource name already bound. So we deleted datasource and created new with another name. again it fails with same error. It keeps on adding these names in JNDI registry, even if datasource are not there. Now is there a way to remove this names other than server restart as this is a production server we can not restart the server. Please let me know if it can resolved in same way ,or if there are some other issue because of which it is failing.
    Thank,
    Nitesh Shelar

    Closing....
    Solution Found None

  • Best Practice to troubleshoot a Crawler Issue after SQL Server restarts

    Hi Everyone
    I am after some general advice or a suggested place to start when troubleshooting crawler issues after an unplanned, out-of-sequence server restart.
    Specifically, the SQL Database in the SharePoint 2010 farm. Better yet, is there a standard practice way of resolving such issues?<o:p></o:p>
    So far articles I have found suggest options from reviewing the crawl logs, creating a new crawl component, right through to using fiddler to monitor the crawler.
    Are these sufficient places to start / methodologies to follow, what else should be considered?
    Any advice greatly appreciated.
    Thanks,
    Mike

    Well, as I said before, there are lots of different potential issues & resolutions for crawlers.  It really depends on the issue.  I would say that the base troubleshooting steps start the same no matter which service/feature you are looking
    at.  So, I'll try to keep this sort of generic, but beyond finding the details of the problem, the SOP or process will vary greatly based on what the error is.  I hope this helps, and sorry if it's not specific enough.
    1 - check the ULS logs
    2 - check the windows application logs
    3 - verify related services are running (get-spserviceinstance), possibly stop/start them to reprovision the instance on the affected server
    4 - clear the config cache (this alone will clear about 30% of your basic problems)
    6 - verify disk space & resource consumption on affected server (& SQL, SQL is always the potential to be the true "affected" server)
    7 - iisreset
    8 - verify connectivity between all servers in the farm and SP
    9 - verify requir3ed features activated
    10- check if any changes were made to environment recently (new hardware, updates to OS or apps, updates to GPOs, new solutions, etc)
    11- check if the issue is reproducible in another environment (only reliable if this is a similar environment, i.e. same patch level test farm or dr farm).  see if it occurs in other site collections within the web app, different web apps, different
    servers/browsers, etc, basically just try to nail down the scope of the problem
    There is a whole slew of thiings you could check from verifying certificates & perms, to rerunning psconfig, to checking registry keys, again I go back to it depends.  hopefully this can get you started though.  in the end ULS is where all
    the real info on the issue is going to be, so make sure you check there.  don't go in with tunnel vision either.  if you see other errors in ULS, check them out, they may or may not be related; SharePoint is an intricate product with way more moving
    parts than most systems.  fix the little quick ones that you know you can handle, this will help to keep the farm clean and healthy, as well as crossing them off the list of potential suspects for your root cause.
    Christopher Webb | MCM: SharePoint 2010 | MCSM: SharePoint Charter | MCT | http://christophermichaelwebb.com

  • Problems with assembly update in Biztalk production server

    Hi.
    I'm facing a problem I cannot solve about an update in one of the resources of an application in Biztalk production server.
    Suddenly a bug in an application that receives messages through an external web service appeared. To find out where the bug was occurring, the orchestration was filled with many EventLogs and some other things to test. After the bug was tracked and corrected,
    it was added an update in resource with the original code of orchestration, that way the EventLogs were no more logged in Event Viewer and the other things wouldn't exists in production.
    Occurrs that the EventLogs are still being logged in Event Viewer. Even after the resource was added many times in server and after many resets in the host instances.
    The problem aren't the logged events, are the other things that we must remove from production to avoid headaches.
    There is a way to fix this? Or some better way to search a resolution for that?
    I'm thinking remove the resource, reset the hosts instances, then add the resource and reset again, but for me this is very hardcore, even more in the production Server.
    Usually, the deployment in production Server is made based in the import of msi files and execution of this files. The "Add -> Biztalk Assemblies" method was used this time only because was an emergency. I don't know if makes sense.
    Thank you for reading, please if you have any answer or material to solve this, reply this question. If you don't understand something because of the English I'm very sorry, I'm still learning the language (and yes I use Google Translate).

    Rafael,
    Enabling the options for GAC as you did, should GAC the components.
    BizTalk uses
    C:\Windows\assembly folder for assemblies. So when you import the msi with GACing options enables, ensure the assemblies are gaced in C:\Windows\assembly folder.
    Otherwise, just drag and drop the assemblies from your folder to this folder. Or using command prompt
    cd to c:\windows\assembly\gac_msil and copy the assembly from your folder.
    Ensure you have GACed the assemblies in all the BizTalk processing machines when you more than one BizTalk machines.
    Also ensure you’re restarting the correct host instances. If the artefact under the isolated host instance, ensure Application pool /IIS is restarted.
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • Composite with dependency not working after soa server restart

    Hello,
    I have composite application that invokes another composite application. After deploying those work fine. But after restarting soa server the one having dependency does not work any more. To soa server log I get following:
    <Jul 1, 2010 11:45:29 AM EEST> <Error> <oracle.integration.platform> <SOA-20003> <Unable to register service.
    oracle.fabric.common.FabricException: Error in getting XML input stream: http://Yacico:8001/soa-infra/services/default/validationForCC/getStatusByCC?WSDL: Response: '503: Service Unavailable' for url: 'http://Yacico:8001/soa-infra/services/default/validationForCC/getStatusByCC?WSDL'
    at oracle.fabric.common.metadata.MetadataManagerImpl.getInputStreamFromAbsoluteURL(MetadataManagerImpl.java:276)
    Caused By: java.io.FileNotFoundException: Response: '503: Service Unavailable' for url: 'http://Yacico:8001/soa-infra/services/default/validationForCC/getStatusByCC?WSDL'
    <Jul 1, 2010 11:45:30 AM EEST> <Error> <oracle.integration.platform> <SOA-20020> <Deployment of composite "POProcessing" failed: Unable to find a WSDL that has a definition for service {http://oracle.com/sca/soapservice/POProcessing/POProcessing/receivePO}receivePO and port execute_pt. Please make sure that the port attribute for the binding defined in the composite file is correct by checking the namespace, service name, and port name. In addition, check that the WSDL associated with the binding namespace is imported and currently reachable (check the import nodes at the top of the composite file). Finally, validate the HTTP proxy settings for the server..>
    So POProcessing does not work any more after server restart. validationForCC works fine also after server restart. Url http://...validationForCC/getStatusByCC?WSDL points to wsdl file and is visible by browser.
    I use soa suite 11g patch set 2 (11.1.1.3) running on redhat enterprise linux 5.
    Any idea what is the problem?
    Is it somehow possible to configure which composites are started first during server startup?
    regards, Matti
    Edited by: user10197965 on Jul 1, 2010 2:28 AM

    Yes, I did that. I'm not all that happy about this as a solution either, but it's better than making multiple copies.
    We have since found out that his is a known bug and that it is fixed in some, but not all, deployments.
    -------- see below -------------
    Composites With WSDL Dependencies Fail To Deploy Following SOA Server Restart [ID 1272070.1]          
    Modified:Jul 19, 2012 Type:PROBLEM Status:MODERATED Priority:3                         
    In this Document
         Symptoms
         Cause
         Solution
         References
    This document is being delivered to you via Oracle Support's Rapid Visibility (RaV) process and therefore has not been subject to an independent technical review.
    Applies to:
    Oracle SOA Platform - Version 11.1.1.3.0 and later
    Information in this document applies to any platform.
    Symptoms
    A SOA Project has an external reference to a Web Service or a reference to another Composite.
    When the SOA Server is started, the Composite is trying to access the WSDL of it's referenced Web Service in order to load data structures. If SOA can not find the WSDL then the Composite fails to load/deploy.
    Once this happens the Composite can not be started, or shutdown, from Enterprise Manager Fusion Middleware Control Application.
    Related Error Messages:
    [ERROR] [SOA-20020] ... Unable to find a WSDL that has a definition for service ... Please make sure that the port attribute for the binding defined in the composite file is correct by checking the namespace, service name, and port name. In addition, check that the WSDL associated with the binding namespace is imported and currently reachable (check the import nodes at the top of the composite file). Finally, validate the HTTP proxy settings for the server.]
    javax.wsdl.WSDLException: WSDLException: faultCode=INVALID_WSDL: Error reading import of oramds
    Cause
    When SOA Server is restarting the Composite can not access the WSDL of it's referenced Web Service (it is not available).
    In the first scenario there are two Composites on the same server: CompositeA and CompositeB.
    In SOA Suite 11g there is no possibility to specify the load order for the composites. If CompositeA references CompositeB and if CompositeA is firstly loaded then it can not access the WSDL from CompositeB and the issue occurs.
    In the second situation there is one Composite on the server (CompositeA) which references an external WebService (ExternalWS). If the ExternalWS is not available when the SOA Server is starting then this issue occurs.
    Solution
    Solution 1
    Redeploy the affected Composite into the SOA Server.
    You can do that but it is not advisable in a production environment and in a development environment it will take a lot of time to redeploy the composite manually
    Solution 2
    Copy the abstract WSDL locally into the project.
    This is documented in these articles in our Knowledge base:
    •     Document:1155033.1 Node Restart Cause Composites To Become Unavailable. Response: '503: Service Unavailable'
    •     Document:1151973.1 Boot Order Of The Composites Upon Soa Suite Restart
    Steps:
    o     a. Copy and use the WSDL file in the Project
    o     b. Edit the WebService Adapter
    o     c. Change the "WSDL URL" to point to the WSDL copied into the project
    o     d. Redeploy the Project
    o     e. Make this configuration with all the Projects that have a references with other Web Services
    Solution 3
    Use shared artifacts in Metadata Service (MDS). A WSDL used by more than one composite is a shared artifact per definition. If the WSDL structure is changed (that is not happening frequently in a production environment), you will normally deploy a composite with a new version because overwriting it will break your production environment. Moreover, in a development environment you will need a proper process in place where different developers access the same artifacts within MDS. In addition, when you use external WSDLs (owned by third parties), you will have a proper process/agreement in place to be notified about modifications affecting your applications.
    1.     In order to use shared artifacts a MDS connection must be configured in jDeveloper:
    http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10224/sca_lifecycle.htm#SOASE85488
    2.     Deploy the shared artifacts:
    o     a. Create a JAR profile and include the artifacts to share
    o     b. Create a SOA bundle that includes the JAR profile
    o     c. Deploy the SOA bundle to the application server
    http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10224/sca_lifecycle.htm#SOASE85472
    If the shared artifacts (WSDLs) needed are from other composites this step can be skipped
    3.     Create a new WebService
    o     a. When completing the "WSDL URL" click on "Find existing WSDL's"
    o     b. Select "Resource Palette"
    o     c. Go to the SOA-MDS
    o     d. Select a WSDL from a Composite or the one deployed at step 2.
    Known Restriction 1
    The port and the location for the WSDL reference is not completed automatically by jDeveloper in the composite.xml file. This information must be inserted manually. In Bug:10287325 is raised this issue and it is available for SOA 11gPS2+.
    Known Restriction 2
    Another issue regarding MDS caching is raised in Bug:10218147 - the MDS cache is not refreshed when an artifact is deployed or deleted.
    In order to refresh this cache the server must be restarted. This Bug resolves the issue but in a production environment the server restart will be the preferred option. The reason for that is because in a production environment you never deploy single composites under the same version after artifacts (WSDLs) have been modified.
    The fix for the Bug:10218147 can be an acceptable solution in development environment where redeployment would be quicker than restarting the server.
    Bug:10218147 is available for SOA 11gPS2+.
    To find out more information about how to use Shared Metadata check the following documentation:
    Oracle Fusion Middleware Developer's Guide for Oracle SOA Suite 11g
    41 Deploying SOA Composite Applications
    41.7.3 Deploying and Using Shared Metadata Across SOA Composite Applications in Oracle JDeveloper
    URL:
    http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10224/sca_lifecycle.htm#CACFEAJJ
    Solution 4
    The last solution is to use an UDDI (Universal Description Discovery and Integration).
    Oracle recommends Oracle Service Registry 11g (OSR). The advantage is that you can use OSR and SOA Suite in a Shared WebLogic Domain.
    http://www.oracle.com/technetwork/middleware/registry/overview/index.html
    http://blogs.oracle.com/governance/2010/05/oracle_service_registry_11gr1.html
    To find out more information about Oracle Service Registry check the following documentation:
    Oracle Fusion Middleware Administrator's Guide for Oracle SOA Suite 11g
    33 Configuring Service and Reference Binding Components
    33.1.3 Changing the Endpoint Reference and Service Key for Oracle Service Registry Integration
    http://download.oracle.com/docs/cd/E15523_01/integration.1111/e10226/bc_config.htm#SOAAG37248
    Oracle Fusion Middleware Developer's Guide for Oracle SOA Suite 11g
    A BPEL Process Activities and Services
    A.4 Publishing and Browsing the Oracle Service Registry
    http://download.oracle.com/docs/cd/E15523_01/integration.1111/e10224/bp_appx_ref.htm#SOASE85561
    Oracle Fusion Middleware Service Registry 11g
    http://download.oracle.com/otndocs/tech/soa/OSR11gR1ProductDocumentation.pdf
    Solution 5
    In case you have BPM Components in the Composites deployed check the following note:
    Document 1317803.1 Soa Suite Composite Fails To Deploy Upon Restart Of Managed Server
    The issue is caused by the Bug:11822470 SOA SUITE COMPOSITE FAILS TO DEPLOY UPON RESTART OF MANAGED SERVER
    References
    BUG:10218147 - WSDL CHANGES NEED SOA SUITE SERVER RESTART
    BUG:10278478 - WHEN SOA SERVER IS RESTARTED, SOME SOA COMPOSITES COULD NOT LOAD/BE DEPLOYED
    BUG:10287325 - ABSTRACT WSDL NOT AVAILABLE WHEN COMPOSITE STARTED
    BUG:10311698 - WHEN SOA SERVER IS RESTARTED, SOME SOA COMPOSITES CAN NOT BE STARTUP / SHUTDOWN
    BUG:11822470 - SOA SUITE COMPOSITE FAILS TO DEPLOY UPON RESTART OF MANAGED SERVER
    @ BUG:9267312 - MDS ARTIFACTS ARE STILL CACHED AFTER DELETING
    @ BUG:9708488 - AFTER SOA RESTART, ALL PROCESSES HAVE TO BE REDEPLOYED
    @ BUG:9749845 - SCHEMA CACHE STARTS EMPTY AFTER RE-START, BUT NOT AFTER DEPLOYMENT
    NOTE:1151973.1 - Boot Order Of The Composites Upon Soa Suite Restart
    NOTE:1155033.1 - Node Restart Cause Composites To Become Unavailable. Response: '503: Service Unavailable'
    NOTE:1317803.1 - Soa Suite Composite Fails To Deploy Upon Restart Of Managed Server
    Bug 11822470 : SOA SUITE COMPOSITE FAILS TO DEPLOY UPON RESTART OF MANAGED SERVER                    
                   Bug Attributes     
    Type     B - Defect     Fixed in Product Version     11.1.1.6
    Severity     2 - Severe Loss of Service     Product Version     11.1.1.4
    Status     80 - Development to QA/Fix Delivered Internal     Platform     912 - Microsoft Windows (32-bit)
    Created     Mar 1, 2011     Platform Version     2003
    Updated     Oct 12, 2012     Base Bug     N/A
    Database Version     N/A     Affects Platforms     Generic
    Product Source     Oracle          
    Abstract: SOA SUITE COMPOSITE FAILS TO DEPLOY UPON RESTART OF MANAGED SERVER
    *** 03/01/11 08:07 am ***
    Customer has a project consists of two services for interaction with the
    process and one reference to an external service.
    On deployment of the process to an Enterprise Environment, the process works
    as expected. However, upon a restart of the managed server, the process will
    then fail to deploy.
    Workaround used is to redeploy the project again.
    Bug 10278478 : WHEN SOA SERVER IS RESTARTED, SOME SOA COMPOSITES COULD NOT LOAD/BE DEPLOYED                    
                   Bug Attributes     
    Type     B - Defect     Fixed in Product Version     
    Severity     2 - Severe Loss of Service     Product Version     11.1.1.3.0
    Status     92 - Closed, Not a Bug     Platform     226 - Linux x86-64
    Created     Nov 10, 2010     Platform Version     RED HAT ENTERPRISE LINUX 5
    Updated     Dec 10, 2010     Base Bug     N/A
    Database Version     N/A     Affects Platforms     Generic
    Product Source     Oracle          
    Abstract: WHEN SOA SERVER IS RESTARTED, SOME SOA COMPOSITES COULD NOT LOAD/BE DEPLOYED
    Detailed Problem Description
    ====================
    When a SOA composite get dependencies with other SOA composites located on the same server, if the dependency is still not loaded, the SOA composite will not be loaded, and there is no possibilities for Entreprise Manager console to restart it (EM crash). The only way to make it working is to redeployed the SOA composite from jDeveloper that is not acceptable in a production environment.
    The composite that has the issue cannot be start-up or shut-down, although the Enterprise Manager do not show any errors with it.

  • How Auto starting Physical Standby Database ( when Server Restart)

    Dear All(s)
    I have configure oracle (10.2.0) dataguard on production database, some time server restart due to power disconnectivity, i want to restard dataguard when server restart. i am using Server 2003 32bit. Guide me how i can run following commands when server restart.
    SQL> connect/as sysdba
    SQL> Startup mount;
    SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;
    Thanks in Advance

    i want to run these command each time when server restart.Yes, I did understand that... but what's the problem ? can't you schedule a task when the server starts ?

  • Production server was rebooted twice due to the cpu panic

    HI.
    Today production server was restarted automatically and found in the logs as cpu gets panic.
    Found below logs in /var/adm/messages :
    Aug  7 10:54:00  unix: [ID 330770 kern.notice] send mondo timeout [retries: 0xb8f12]  cpuids:
    Aug  7 10:54:00ABCDEFunix: [ID 152697 kern.notice]  0x0
    Aug  7 10:54:00ABCDEFunix: [ID 100000 kern.notice]
    Aug  7 10:54:00ABCDEFunix: [ID 350512 kern.notice] panic: failed to stop cpu0
    Aug  7 10:54:00ABCDEFunix: [ID 350512 kern.notice] panic: failed to stop cpu1
    Aug  7 10:54:00ABCDEFunix: [ID 350512 kern.notice] panic: failed to stop cpu2
    Aug  7 10:54:00ABCDEFunix: [ID 350512 kern.notice] panic: failed to stop cpu3
    Aug  7 10:54:00ABCDEFunix: [ID 350512 kern.notice] panic: failed to stop cpu4
    Aug  7 10:54:00ABCDEFunix: [ID 350512 kern.notice] panic: failed to stop cpu5
    Aug  7 10:54:00ABCDEFunix: [ID 350512 kern.notice] panic: failed to stop cpu6
    Aug  7 10:54:00ABCDEFunix: [ID 350512 kern.notice] panic: failed to stop cpu7
    Aug  7 10:54:00ABCDEFunix: [ID 836849 kern.notice]
    Aug  7 10:54:00ABCDEF^Mpanic[cpu59]/thread=3005a920340:
    Aug  7 10:54:00ABCDEFunix: [ID 152620 kern.notice] send_mondo_set: timeout
    Aug  7 10:54:00ABCDEFunix: [ID 100000 kern.notice]
    Aug  7 10:54:00ABCDEFgenunix: [ID 723222 kern.notice] 000002a108181310 unix:send_mondo_set+4a4 (1, 2, 31a968c90fe012, 3e, 300095b0600, b8f12)
    Aug  7 10:54:00ABCDEFgenunix: [ID 179002 kern.notice]   %l0-3: 000000000183c730 0000000000000001 000000000000ffff 0031a968c90fe508
    Aug  7 10:54:00ABCDEF  %l4-7: 0000000001dc7ac2 0000000000000000 00000000010b7fa0 0000000000000000
    Aug  7 10:54:00ABCDEFgenunix: [ID 723222 kern.notice] 000002a1081813f0 unix:xt_some+194 (2a108181650, 2a1081814e0, f7ffffffffffffff, fffffffffffffff8, 2a1081814a8, 0)
    Aug  7 10:54:00ABCDEFgenunix: [ID 179002 kern.notice]   %l0-3: 00000000018919ac 000002a1081814e0 0800000000000000 0000000000000000
    Aug  7 10:54:00ABCDEF  %l4-7: f7ffffffffffffff 000002a108181520 000002a1081814e0 0000000000000000
    Aug  7 10:54:00ABCDEFgenunix: [ID 723222 kern.notice] 000002a108181560 unix:sfmmu_tlb_range_demap+1e8 (2a1081817a0, 300155e0980, 3b, 0, 0, 1)
    Aug  7 10:54:00ABCDEFgenunix: [ID 179002 kern.notice]   %l0-3: 00000000018af610 0000000000000001 00000000018b8c74 00000300155e0980
    Aug  7 10:54:00ABCDEF  %l4-7: 00000000ff180000 0000000000000001 0000000000002000 0000000000000000
    Aug  7 10:54:00ABCDEFgenunix: [ID 723222 kern.notice] 000002a108181690 unix:sfmmu_chgattr+348 (2, ff182000, 188b260, ff182000, 0, 300155e0980)
    Aug  7 10:54:00ABCDEFgenunix: [ID 179002 kern.notice]   %l0-3: 000002a1081817a0 00000300155e0980 00000300155e0988 ffffffffffff0000
    Aug  7 10:54:00ABCDEF  %l4-7: 0000000000001c00 0000000000000001 0000070023cc7380 0000000000000009
    Aug  7 10:54:00ABCDEFgenunix: [ID 723222 kern.notice] 000002a108181830 genunix:segvn_setprot+9a0 (9, ff180000, 2000, ff180000, 6004cfcaf78, 2000)
    Aug  7 10:54:00ABCDEFgenunix: [ID 179002 kern.notice]   %l0-3: 0000000000000000 0000000000000000 0000000000000009 000003005ac4fbd0
    Aug  7 10:54:00ABCDEF  %l4-7: 0000000000000000 0000000000000000 0000000000000009 000000000000000f
    Aug  7 10:54:00ABCDEFgenunix: [ID 723222 kern.notice] 000002a108181930 genunix:as_setprot+174 (6004cfcaf78, 3005ebbbdb8, 2000, 9, ff180000, 2)
    Aug  7 10:54:00ABCDEFgenunix: [ID 179002 kern.notice]   %l0-3: 0000000000000000 000006004cfcafa8 000006004cfcaf82 0000000000000000
    Aug  7 10:54:00ABCDEF  %l4-7: 0000000000000000 000006004cfcafc8 0000000000002000 000006004cfcaff0
    Aug  7 10:54:00ABCDEFgenunix: [ID 723222 kern.notice] 000002a108181a30 genunix:mprotect+6c (1fff, 2000, 9, 0, 10b0c00, ff180000)
    Aug  7 10:54:00ABCDEFgenunix: [ID 179002 kern.notice]   %l0-3: 0000000000000000 0000000000000000 00000000217c0000 000000000000217c
    Aug  7 10:54:00ABCDEF  %l4-7: 0000000000000001 000006004cfcaf78 000006004b175958 0000000000000000
    =================
    Taken hard reboot for server after that its workingfine.
    Searched on google as found as reason that there no proper synchronization between processors in the time duration(1 milli sec)
    Any one got above error and how its resolved.?

    c1c3a78b-3a3e-43a1-939b-c1cce9126652 wrote:
    there's no hardware error found on the system
    checked with prtdiag and physically.there no amber led on server also.
    no error messages in dmesg.
    You cannot presume there isn't a hardware fault just because a CPU module has resumed its operation after a panic.
    CPU's do not become disabled.    They are too fundamentally critical to a system and will always try to run when you boot a system.
    I have to contact oracle for this?
    Yes,.   If your system is a Oracle/Sun branded system, then you use your service contract credentials and log a Support Request.   They will likely have you run Explorer and they will analyze the information saved in the Explorer output file.
    If your system is from some other hardware company (IBM or HP for example) you contact them instead.

  • Server restarts while working

    We are using Novell version 6.5 installed on HP Proliant ML350G5 server configured for RAID 5 since 2005 without any trouble. However recently we are facing problem that server automatically get restarts. Some time restart may occur twice or thrice in a day. Sometime not at all for 4-5 days. We are using In house application developed in Visual Foxpro 9 and using since 2005 without any trouble. Mostly it has been noticed that server restart occurs mostly in the morning session. Morning session most users are attemp to logged to server to start working. One thing is to be notice that there is no dabtabase (.dbf) corruption ocures if server restart.

    On 01.12.2010 08:36, choudharidl wrote:
    >
    > We are using Novell version 6.5 installed on HP Proliant ML350G5 server
    > configured for RAID 5 since 2005 without any trouble. However recently
    > we are facing problem that server automatically get restarts. Some time
    > restart may occur twice or thrice in a day. Sometime not at all for 4-5
    > days. We are using In house application developed in Visual Foxpro 9 and
    > using since 2005 without any trouble. Mostly it has been noticed that
    > server restart occurs mostly in the morning session. Morning session
    > most users are attemp to logged to server to start working. One thing is
    > to be notice that there is no dabtabase (.dbf) corruption ocures if
    > server restart.
    >
    >
    Well, first of all we need to know the service pack of that server
    (enter "version" on the console). Next we need to see
    sys:\system\abend.log (only the last entry starting with "Abend 1", but
    in it's entirety, including the module list)
    CU,
    Massimo Rosen
    Novell Product Support Forum Sysop
    No emails please!
    http://www.cfc-it.de

  • Migrating Endeca Application and Data from development to a production server

    We need to move an Endeca app (including data domain) to a production server from a development server
    I installed EID 3.1 in the prod server successfully and this is what I did after the install:
    1. Created a new application in Studio (name: JULY2014POC)
    2. Manage Pages - Import the .lar file
    3. Copy JULY2014POC.worddat file and JULY2014POC_indexes folder to new server, location: domains/endeca_server_domain/EndecaServer/data with all the servers down. Then restarted endeca server, ps server, and studio server.
    4. When I try to create an Endeca Server connection it gives me error (Connection definition format is valid but unable to connect.)
    5. This is my entry:
      "contextPath": "/endeca-server",
      "currentFunctions": [],
      "dataDomainName": "JULY2014POC",
      "name": "JULY2014POC",
      "port": 7001,
      "restrictedToRoles": ["Administrator"],
      "server": "10.2.192.171"
    6. When I run any endeca-cmd at OS level I get the following Warning (4 times):
    $./endeca-cmd.sh list-dd-profiles
    <Oct 29, 2014 4:51:33 PM EDT> <Warning> <oracle.wsm.resources.policyaccess> <WSM-06210> <An instance of the interface oracle.wsm.policymanager.IUsageTracker bean for the local repository at path "" was not available for configuring the oracle.wsm.policymanager.accessor.BeanAccessor repository accessor for context "ResourcePattern [pattern=DOMAIN/weblogic/endeca_server_domain, subjectType=MANAGED_DOMAIN, terms={PLATFORM=weblogic, SUBJECT_TYPE=MANAGED_DOMAIN, DOMAIN=endeca_server_domain}]".>
    default
    What am I doing wrong?  Can someone please help me?  thank you

    Hi Sergio,
    How the data import and export works is what you have to look into. Whenever you export your content it gets exported to a particular directory. If the same directory should be referenced by the code base as well which would be mentioned in the properties file for fetching the configurations.
    If they are not aligned they won't pick it up. Also you will have to create pages like endeca-server and make it the default page in your properties file.
    Hope u cross this hurdle soon.
    Thanks
    Karthik V

Maybe you are looking for