Production State in SWCV SLD WAS 7.0

Hello,
We've just installed PI 7.0 with the new look and feel of the SLD and the Software catalog: SAP_CR, Version 2.9, 06/21/2006.
New are the software units -> minor info is given in the documentation. And when creating SWCV in a drop down box the "Production State" must be selected:
planned
started
locked
developed
published
released
reverted
archived.
However no documentation on what state to choose when starting developing in a new component. It seams logic to select started -> however anybody more information on this state and in what circumstances has the state to be switched??
Thanks,
Emile

Hi Emile,
you are right. Documentation is very sparse up to now. But I am sure it will be improved shortly in this place:
http://help.sap.com/saphelp_nw2004s/helpdata/en/e8/c5fe4e336c4fdd89eb5fe5abc02865/content.htm
I found this post, which does not answer your question, but deals exactly with the subject. Please watch it.
Process Integration (PI) & SOA Middleware
regards
Dirk

Similar Messages

Production State of SWCV

Hi all,
Can someone please throw some light on 'Production State' of SWCV(General tab) in SLD.
I can't find any documentation. Don't know the impact of these different states..Please help.
cheers
danus

Chidambaram,
I would agree with the answer above,.
As the SLD is the central repository of your entire landscapre I guess these nuew features for your SWCV's are just a means of helping your strucutre your components.
Maybe at a later stage these might have some significant improtance, but currently this does not affect XI in any way.
Regards
Bhavesh

Change the Production state of Software Component in SLD

Hello,
I cannot see the list of software component to add in Dev Configuration because the Production State of software component is in Planned state and to appear in the list it should be in Devlopment state.
How do I change the state. When I login to SLD i dont see the edit mode to change it.
Thanks
PS: I did not realize there is separate NWDI forum. I also asked the same question in Web Dynpro forum.

Hi,
if the question is about, why the custom developed software is not visible in "CMS - Landscape Configurator - Track Data tab" when pressing the button "Add SC...", then please answer:
Did you trigger "Update CMS" after creating the software in SLD? You can do it in the CMS webui - Landscape Config - Domain Data tab.
Best Regards,
Ervin (http://wiki.sdn.sap.com/wiki/display/TechTSG/%28NWDI%29Home)

Production States of Software components

Hi,
I want to know what are the Production states
(for eg planned,initial,started) which appear when we try to create new software component in SLD and whish one to be selected while creation of software component.
Thanks,
Amit

Hi,
> whish one to be selected while creation of software component
In this case it is started like described here:
http://help.sap.com/saphelp_nw04s/helpdata/en/43/e959e7a0302d56e10000000a422035/frameset.htm
This thread is also about this topic:
Problem with Software Component
Regards
Patrick
Edited by: Patrick Koehnen on Apr 14, 2008 1:24 PM

HT1338 hi, my firefox and safari are both having difficulty loading certain parts of web pages. previous to this my firefox would freeze and state that a script was not responding. i would stop the script and reload the page and everything would be fine.

hi, my firefox and safari are both having difficulty loading certain parts of web pages. previous to this my firefox would freeze and state that a script was not responding. i would stop the script and reload the page and everything would be fine. now though the pages just load very very slowly or load leaving out certain pictures and video content. i've tried clearing my cache's and cookies, resetting my browser etc, but it seems like its a system issue as both safari and firefox are having issues. i've run Avast to screen for malware and it came up empty. any suggestions?

10.4.8's been a pain for Networking... not sure of all the reasons though, or whether all the complaints might not be MS working around Bugs/Non-compliance, but at this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, boot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
Fixes a lot of problems, and besides, if your Mac ever gets to the point it won't Boot... this is a life saver!
After you run that... let's see where we are.
BTW, several ISPs seem to have trouble with their DNS Servers lately, might try these insead...
208.67.222.222
208.67.220.220

Alchemy for xfi - the product state could not be determined (error 6

as the title states I have xfi platinum & installed alchemy for xfi, tried to start it & I get "the product state could not be determined (error 60)" I click any of the links & it takes me to the buy page for the audigy alchemy. I've tried uninstalling & reinstalling multiple times, also uninstalled & reinstalled my xfi drivers. No change. I can enter anything into the entry field on the activation page & It'll advance me to the next page, then when it goes to connect to creative to register. I get another error. "an error occurred while attempting to connect to the internet. (00000)" I dont have anything blocked regarding this program & have tried with my firewall disabled. Please. Help

Well I didnt follow the link, but a kind person did download an update for Windows for me, if i can find link i will post it is from USA, took over 2 hours to install/update but appears to fix this problem, i now have all the bits that windows left out back on pc, so there is a solution out there, i know the site it came from there had been 80,000 downloads in over 2 days.

How to avail product warranty if the unit was bought from other country?

how to avail product warranty if the unit was bought from other country?

You can't and iPhone warranty is NOT international - iPhone warranty is country specific so if you have warranty issues, then you will need to go back to the country of original purchase - nothing more to do. This is exactly why it is not a good idea to buy iPhones abroad - you should buy an iPhone in the country that you live in and want to use the phone in and then you will not have warranty problems.

Getting product state for Anti Virus using WMI.

Hi All,
I have seen lot on blogs and discussion on productstate for AV, AS and FW. But none of them give the complete information of product state.
Do MSDN has any link that explains the product state completely. Or any relevant link for this.
Moreover pre Vista os using WMI we can find the version of AS, AV ans FW, but in post Vista OS WMI does not provide the information of version of the product so how we can achieve this in post Vista os.

Have you looked at this?
https://msdn.microsoft.com/en-us/library/jj155489%28v=vs.85%29.aspx
thanks
Frank K [MSFT]
Follow us on Twitter, www.twitter.com/WindowsSDK.

SAP ECC 6.0 Software component Versions or Product versions in XI (SLD)

Hi All,
please, let me know the solution for this problem,
Curently we r using PI 7.0 SPS 14 kernal Version 179.
Unable to find out SAP ECC 6.0 Software component Version or (Product version) in SAP XI 7.0 SLD.
how to solve this issue....
Advace thanks.
Mahesh

Hi Volkar,
I am doing Plant driven procurement service enablement scenario by using XI 7.0, for this,
we are integrating MM & SRM SUS Through XI 7.0 (MM -- XI-- SRM SUS).
For doing this Scenario,
1. Downloaded XI Content for SRM
2. Imported XI Content into the IR
3.After importing, Plan_Driven_Procurement_SupplierEnablement Scenario was enabled.
Here, MM side SWCV is R/3 4.6 is available by default. but in my case i need to change to ECC 6.0(bcoz,currently we r using ECC 6.0 version )
In SLD, there is no ECC 6.0 version.
So, how to solve this issue.
Thanks in Advance.
Mahesh

Error in Updating SWCV SLD Info

Hi
When i try to use the 'Update SLD Information' under tools in the enterprise repository i get the following error -
GUID of software component version in SLD has changed To import the software component version with the new GUID, create a new software component version
Why does this occur and what can be done about it?
Thanks
Riaz

Hi,
1. In your SLD of dev, do you have the same GUID for this SWCV ?
if yes, you should do a clear cache of your IS (PI web page -> administration -> cache -> etc..) + SXI_CACHE.
2. if no, eventually, think to this non-normal action.... but...
Do you have this SWCV in another PI environment (exm PI qua) with your GUID (this one of ESR)?
If yes, check if you have this SWCV (same GUID) in the SLD of this other environment (exm XI QUA).
if yes, maybe a solution to avoid your conflict in ESR dev / SLD dev is to do an export of this SWCV from SLD qua to SLD dev... but... that's clearly not the normal way... with perhaps other impacts (I don't know your landscape, your SWCV dependency, your development phase vs production and/or maintenance)... so that's just an idea which could be thank. (coud be)
Mickael

Binding ADF UI to a complex XML Type – Development Productivity, State Mgmt

Binding ADF UI to a complex Web Service – Development Productivity, Managing State, Etc.
For those scenarios when ADF UI has to be bound to a complex XML type, it seems that the direction taken by the ADF development team was to generate data-controls that map to complex XML types.
The major problem with this approach is the fact that application server does not manage state. For example, If application has to submit a purchase order to a web service then application server has to manage the shopping card state until its ready to be submitted.
In some previous forum threads it had been suggested that using generated data-controls is a “quick and dirty” solution for accessing web services and that a proper solution is to use generated Java Proxy Interface.
That implies many manually constructed entity objects, associations and overridden doDML methods, which is far less productive compared to entity objects generated from a database schema.
Suggestion and a Question for the ADF development team
From the logical model standpoint, there is no difference in between the XML schema and DB schema. Therefore, it is possible to generate entity objects and associations for XML Types of XML schema the same way it’s done for tables of Database schema. The only difference is serialization of CRUD operations on entity objects.
One way to handle this is:
-     Generate Application Module for a complex XML type. This application module should have methods for marshaling to/from corresponding XML type.
-     Generate entity object for each subtype within the complex XML type. In case of nested subtypes, generate association to a parent type.
-     Generate data control with actions that are bound to web service operations and code that serializes request message from corresponding AM and de-serializes response message to corresponding AM.
This way, ADF would offer the same productivity for the SOA development as one its currently offering for the ORM development.
Until the time when something like this is available, what would be the best approach for binding ADF UI to web services?
Feedback is greatly appreciated.
Boro Petrovic
Edited by: wds12518 on Jan 25, 2010 11:49 AM

We have similar issues as our big portion of the UI is based on WS. We found that there is no easy way to map entity object structure to complex XML type (one EO can based on one flat type or domain can't be bound to UI directly). Oracle PMs, is there any better solution or future plans to address this issue?

Protect Production Systems from Local SLD installations

If we have several developers in our organization with Local Development Workstations (meaning they installed a local copy of WAS 6.40, MaxDb, Portal) how do we prevent those developers from setting up there local SLD to connect to Production Systems. If they set up a production system in the local SLD they will be able to configure their "adaptive rfc webdynpros" to connect to the production system with the jco connections in the Webdynpro Content Administrator. Is the only control point their id they would enter when configuring the jco connection?

YOu need the authorization for login in SLD as admin
Follow this link for compete details:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Are there any impacts/differences between exporting/importing and creating the systems manually? For example if I cannot export the systems would it be ok if I created them again in the production SLD?
No differeence...it's just increase the work you have to do in SLD...but the important thing here is when you move the tranports of the SLD BS from DEV to Production you have to maintin the same name as you have maintained in the trnsport targets in the DEV......your ID tranport to Production is dependedn on what is the BS name you are mentinog of production in the transports targets.

SAP ECC 6.0 product is missing in SLD - Can I import it from any file?

Hello All,
I am doing IDOC to file scenario in PI7.0 and ECC 6.0. When I am trying to configure Technical system - I am running this problem as my IDOC is coming from ECC 6.0. I have created all RFC and ports.
When I am trying to create Technical system - I don't see product listed. It has SAP ECC 5.0 not 6.0
Please help me in solving my problem.
-Sanjiv

Hi,
I would recomend you register the technical system directly from ECC by using the Data Collector function in transaction rz70
you would need the SLD system host name and the gateway for registering the tech system automatically..
Hope this helps.
Plz award points if found useful.
Cheers!!
Sidharth
Edited by: Sidharth Velagapudi on Apr 24, 2008 2:34 AM

Topink 9.0.4 not generating an update statement, if the object was changed.

I have 2 tables T_Objects and T_Categories.
T_Objects stores images as a BLOB field. T_Categories stores the details of an article category and references the pictogram in T_Objects via a FK.
I have 2 webpages. One which is used to load the pictogram in T_Objects and the other which is used to maintain details of the category in T_Categories. As soon as the image is uploaded and is displayed on the screen, user fills in the category details and saves them.
Each of these operations is performed in a seperate HTTP Request (and consequently seperate UOW). The idea is that the user first uploads an image, checks the image on the screen and the decides to associate it with a category.
The database is Oracle 9i. Driver used is OCI 8. Binary Steam Binding is enabled for BLOB fields. DatabasePlatform is Oracle9Platform.
The descriptors of both the tables use SoftCacheWeakIdentity and the cache size is 100. Both tables use Optimistic Locking based on a version field using TimestampLockingPolicy.
Coming to the problem, if the delay between the upload of the image and saving of the category details is large (say 20 seconds or so) Toplink generates a Update query to update the details in T_Categories. If the delay is smaller than that then Toplink fails to generate an update query even if the object was changed. Upon debugging I find that just before the commit, the BO being committed has all the correct details including the new PK of the uploaded image.
Assuming that the BO pointing to T_Objects may not be in Cache (owing to images of size 200+ KB) I did an explicit read of this object before attempting to save details to T_Categories. Even that does not seem to help.
Any ideas on what is happening here?

Chris. Thanks for your reply. I did not get your point. However these are the steps being done.
Can you please go through the code and check what could be wrong?
Steps
1) createContent(VmTObjectsVO vo) is called to insert into VM_T_OBJECTS.
This internally calls create ( Object obj, UnitOfWork uow, boolean commitChanges )
2) update( VmSubcategoriesVO vo ) is called to update a sub-category details to VM_T_SUBCATEGORIES.
This internally calls save( Object bo, UnitOfWork uow, boolean commitChanges )
In the save method at the time of uow.commitAndResume() no update statement is getting generated.
These core methods are used for almost all tables in the application and all of them work.
It is only in this use case I have a problem.
* Creates a new entry for storing the image/document in VM_T_OBJECTS.
* @param vo the content to be stored.
* @return the sequence assigned to this object.
public Long createContent(VmTObjectsVO vo){
VmTObjectsVO voSaved = null;
Long lnContentId = null;
if(vo != null){
VmTObjectsBO bo = new VmTObjectsBO();
/* copy the properties from the VO to the BO. */
ObjectAssembler.vo2bo((BaseVO)vo, bo);
/* Create the content */
lnContentId = create(bo);
return lnContentId;
* updates a subcategory to VM_T_SUBCATEGORIES
* @param vo VmSubcategoriesVO to update.
* @ return updated VmSubcategoriesVO
public VmSubcategoriesVO update( VmSubcategoriesVO vo ) {
VmSubcategoriesBO boSaved = null;
VmSubcategoriesVO voSaved = null;
VmSubcategoriesBO bo = new VmSubcategoriesBO( );
/* Copy the properties in the VO to the BO */
ObjectAssembler.vo2bo( vo, bo );
/* Save the changed object */
save( bo );
return voSaved;
* Stores the new object in the database and
* returns the primary key identifier with which it was created.
* @param obj The object to be created.
* @param uow Use this unit of work for performing the insert.
* @param commitChanges Should commit changes upon insertion?
* If the client wants to perform the commit operation across several others
* operations, then the value should be set to false.
* @return Primary key of the object created.
public Long create ( Object obj, UnitOfWork uow, boolean commitChanges ) {
Object cacheObj = null;
Long lnSequenceAssigned = null;
if ( obj == null ) {
throw new ObjectNotFoundException( null, null, null, null );
try {
if (uow == null) {
/* create a new unit of work if necesasry */
uow = getUnitOfWork( dbSession );
/* Assign a sequence number */
uow.assignSequenceNumber( obj );
/* Get the descriptor associated with this object */
Descriptor descriptor = uow.getDescriptor(obj);
/* Get the sequence assigned */
lnSequenceAssigned = (Long)descriptor.getObjectBuilder().getBaseValueForField(descriptor.getSequenceNumberField(),obj);
/* Register the object */
uow.registerObject( obj );
if(commitChanges){
/* Commit the changes */
uow.commitAndResume();
} finally {
return lnSequenceAssigned;
* Saves changes to an existing object to the data store.
* Has only been tested for flat-objects. Objects that reference other
* persistent objects have not been tested.
* @param bo The object to be saved.
* @param uow The UnitOfWork to use for saving the object.
* @param commitChanges whether the changes should be committed.
* If the client wants to perform the commit operation across several others
* operations, then the value should be set to false.
public void save( Object bo, UnitOfWork uow, boolean commitChanges ) {
if ( bo == null ){
throw new IllegalArgumentException(
"Object is invalid" );
try {
/* Register the object supposed to be existing */
Object clone = uow.registerExistingObject( bo );
/* This object does not exist */
if ( clone == null ) {
throw new ObjectNotFoundException( "object not found", "dao", bo.getClass().getName(), bo.toString());
/* Copy the properties from the object to the clone, to ensure that
* the intended properties have not been overwritten in the object from
* the cache
ObjectAssembler.copy( bo, clone );
/* Commit the changes. */
if(commitChanges){
uow.commitAndResume();
} finally {
dbSession.release( );
}

Issues related to Software Product & Component Import from SLD to IR

Hi XI Gurus,
Can you please provide me solutions on these:
1. How can I delete / remove from display some Software Product (top node) from the Integration repository ?
By mistake I imported all the available software components from SLD while I attempted to import a specific one. Now it built up a big list causing navigation problem and therefore I want to get rid of these newly imported ones. Is there really a way to revert back something imported from SLD?
2. What need to be done from the SLD / IR side to see a newly created Product in SLD for import to IR. I created one product in SLD but not able to see the same in import list from SLD in IR.
I'm a new XI developer just started working on a POC project. Please don't mind if these are silly questions.
Regards,
Subhadip

Das,
<i>1. How can I delete / remove from display some Software Product (top node) from the Integration repository ?
By mistake I imported all the available software components from SLD while I attempted to import a specific one. Now it built up a big list causing navigation problem and therefore I want to get rid of these newly imported ones. Is there really a way to revert back something imported from SLD?</i>
Solu:
If you want to delete the software component in IR then delete all the interface mappings, message mappings, message interfaces, message types, data types and then all the namespaces. Then you can delete the software component. For your reference check this weblog on the same:
/people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
Also check this thread for the same:
how can i delete software component in the IR
<i>2. What need to be done from the SLD / IR side to see a newly created Product in SLD for import to IR. I created one product in SLD but not able to see the same in import list from SLD in IR.</i>
You dont need to do anything if you have created all the steps in SLD. Just you have to import it.
Check this weblog for your reference:
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
---Satish

Production State in SWCV SLD WAS 7.0

Similar Messages

Maybe you are looking for