Production State of SWCV
Hi all,
Can someone please throw some light on 'Production State' of SWCV(General tab) in SLD.
I can't find any documentation. Don't know the impact of these different states..Please help.
cheers
danus
Chidambaram,
I would agree with the answer above,.
As the SLD is the central repository of your entire landscapre I guess these nuew features for your SWCV's are just a means of helping your strucutre your components.
Maybe at a later stage these might have some significant improtance, but currently this does not affect XI in any way.
Regards
Bhavesh
Similar Messages
-
Production State in SWCV SLD WAS 7.0
Hello,
We've just installed PI 7.0 with the new look and feel of the SLD and the Software catalog: SAP_CR, Version 2.9, 06/21/2006.
New are the software units -> minor info is given in the documentation. And when creating SWCV in a drop down box the "Production State" must be selected:
planned
started
locked
developed
published
released
reverted
archived.
However no documentation on what state to choose when starting developing in a new component. It seams logic to select started -> however anybody more information on this state and in what circumstances has the state to be switched??
Thanks,
EmileHi Emile,
you are right. Documentation is very sparse up to now. But I am sure it will be improved shortly in this place:
http://help.sap.com/saphelp_nw2004s/helpdata/en/e8/c5fe4e336c4fdd89eb5fe5abc02865/content.htm
I found this post, which does not answer your question, but deals exactly with the subject. Please watch it.
Process Integration (PI) & SOA Middleware
regards
Dirk -
Change the Production state of Software Component in SLD
Hello,
I cannot see the list of software component to add in Dev Configuration because the Production State of software component is in Planned state and to appear in the list it should be in Devlopment state.
How do I change the state. When I login to SLD i dont see the edit mode to change it.
Thanks
PS: I did not realize there is separate NWDI forum. I also asked the same question in Web Dynpro forum.Hi,
if the question is about, why the custom developed software is not visible in "CMS - Landscape Configurator - Track Data tab" when pressing the button "Add SC...", then please answer:
Did you trigger "Update CMS" after creating the software in SLD? You can do it in the CMS webui - Landscape Config - Domain Data tab.
Best Regards,
Ervin (http://wiki.sdn.sap.com/wiki/display/TechTSG/%28NWDI%29Home) -
Alchemy for xfi - the product state could not be determined (error 6
as the title states I have xfi platinum & installed alchemy for xfi, tried to start it & I get "the product state could not be determined (error 60)" I click any of the links & it takes me to the buy page for the audigy alchemy. I've tried uninstalling & reinstalling multiple times, also uninstalled & reinstalled my xfi drivers. No change. I can enter anything into the entry field on the activation page & It'll advance me to the next page, then when it goes to connect to creative to register. I get another error. "an error occurred while attempting to connect to the internet. (00000)" I dont have anything blocked regarding this program & have tried with my firewall disabled. Please. Help
Well I didnt follow the link, but a kind person did download an update for Windows for me, if i can find link i will post it is from USA, took over 2 hours to install/update but appears to fix this problem, i now have all the bits that windows left out back on pc, so there is a solution out there, i know the site it came from there had been 80,000 downloads in over 2 days.
-
Production States of Software components
Hi,
I want to know what are the Production states
(for eg planned,initial,started) which appear when we try to create new software component in SLD and whish one to be selected while creation of software component.
Thanks,
AmitHi,
> whish one to be selected while creation of software component
In this case it is started like described here:
http://help.sap.com/saphelp_nw04s/helpdata/en/43/e959e7a0302d56e10000000a422035/frameset.htm
This thread is also about this topic:
Problem with Software Component
Regards
Patrick
Edited by: Patrick Koehnen on Apr 14, 2008 1:24 PM -
Getting product state for Anti Virus using WMI.
Hi All,
I have seen lot on blogs and discussion on productstate for AV, AS and FW. But none of them give the complete information of product state.
Do MSDN has any link that explains the product state completely. Or any relevant link for this.
Moreover pre Vista os using WMI we can find the version of AS, AV ans FW, but in post Vista OS WMI does not provide the information of version of the product so how we can achieve this in post Vista os.Have you looked at this?
https://msdn.microsoft.com/en-us/library/jj155489%28v=vs.85%29.aspx
thanks
Frank K [MSFT]
Follow us on Twitter, www.twitter.com/WindowsSDK. -
Binding ADF UI to a complex XML Type – Development Productivity, State Mgmt
Binding ADF UI to a complex Web Service – Development Productivity, Managing State, Etc.
For those scenarios when ADF UI has to be bound to a complex XML type, it seems that the direction taken by the ADF development team was to generate data-controls that map to complex XML types.
The major problem with this approach is the fact that application server does not manage state. For example, If application has to submit a purchase order to a web service then application server has to manage the shopping card state until its ready to be submitted.
In some previous forum threads it had been suggested that using generated data-controls is a “quick and dirty” solution for accessing web services and that a proper solution is to use generated Java Proxy Interface.
That implies many manually constructed entity objects, associations and overridden doDML methods, which is far less productive compared to entity objects generated from a database schema.
Suggestion and a Question for the ADF development team
From the logical model standpoint, there is no difference in between the XML schema and DB schema. Therefore, it is possible to generate entity objects and associations for XML Types of XML schema the same way it’s done for tables of Database schema. The only difference is serialization of CRUD operations on entity objects.
One way to handle this is:
- Generate Application Module for a complex XML type. This application module should have methods for marshaling to/from corresponding XML type.
- Generate entity object for each subtype within the complex XML type. In case of nested subtypes, generate association to a parent type.
- Generate data control with actions that are bound to web service operations and code that serializes request message from corresponding AM and de-serializes response message to corresponding AM.
This way, ADF would offer the same productivity for the SOA development as one its currently offering for the ORM development.
Until the time when something like this is available, what would be the best approach for binding ADF UI to web services?
Feedback is greatly appreciated.
Boro Petrovic
Edited by: wds12518 on Jan 25, 2010 11:49 AMWe have similar issues as our big portion of the UI is based on WS. We found that there is no easy way to map entity object structure to complex XML type (one EO can based on one flat type or domain can't be bound to UI directly). Oracle PMs, is there any better solution or future plans to address this issue?
-
Greetings,
I am interested in anyone to share their experiences in a live BW AFS environment. Specifically, we understand that clients do convey different levels of customizations, making some of them unique. But, from a more general Industry Specific (AFS) perspective: to what degree has our SAP BI Content satisfy general reporting requirements? What has been the major challenges? (Data loading/scheduling, tracking production orders, contracts, etc.) Best Practices in AFS reporting/Analytics examples, lessons learned that could be applied to other AFS customers.
Assumptions:
BW 3.x, or NW04s
DI 4.70
ECC 5.0
Netweaver
All input from your experiences will be properly rewarded with SDN points.
Thank you in advance.
Joseph BanegasHi Naveen,
You can find the information on AFS (datatargets, infosources, datasources, keyfigures and characters...) in the following link...
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/27443cbe062e59e10000000a114084/frameset.htm
Only schedule line level datasouces have AFS specific fields as the size color... is the information at schedule line level. If you want to report at higher level you can just go with the normal item level or header level extractors
Hope it helps -
Wireless Music: Product Stat
Hi there,
does anyone know if Creative still consider the Wireless Music system as a "li've" product?
I've just been trawling the forum looking for info about drop outs and freezes, and found a thread where the moderator was kind enough to email a test version of a new firmware to those that requested it. This thread started months ago and as far as I can see this firmware has still not been posted to the official download site. This seems to imply that Wireless Music isn't receiving much love & attention from Creative. Are we likely to see any further development of the system in the future?
I love the LCD remote supplied with the system but with a large song library finding a particular track can take far too long. Are there any plans to update the software in the remote to either improve the scrolling speed or improve the search facilities?
Cheers,
Q.Cat,
Please pass along the bug with accented characters in the Artist name like M?tley Crue. Using the remote if you go in by artist to the albums under the artist and then select the album, nothing displays. If you go in directley from albums it works fine. This is a software bug that's been identified for about a year now and nothing has been done to correct it. As can be seen by this example and others there appears to be a black hole somewhere between the moderators and the developers (if there are any).
W3 -
[SLD] change SWC production status
Hello,
I created a SWC in SLD with production status planned, but I'm not able to change this status. The documentation has not been extended since this Production State in SWCV SLD WAS 7.0 year.
Is the production status used for something? Which effect got every status? Got anyone experiences with this?
thanks
greetz
chris
Message was edited by:
Christian RiekenbergThanks a lot.
I don't like fields that have no use but just confusing the user
greetz
chris -
Product and SWCV best practice
We have a 3rd party Product that tend to change product versions
frequently as once in 3-5 month.
as SAP Software logistics mechanisem is based on hierrachy of
Product->product version->SWCU->SWCV
My quesion is :
what is the best way to maintain this Product versioning in the SLD and IR,
To allow best practice of software logistics in XI and maintanance?
Please share from you knowledge and expiriance only.
NimrodStructuring Integration Repository Content - Part 1: Software Component Versions
Have a look at that weblog and also search for the following parts of the same. That should give you a good idea. -
hi
m new to XI world
i searched for this in SDN forums but i didnu2019t get the right documentation regarding this.
in the software units -> minor info is given in the documentation. And when creating SWCV in a drop down box the "Production State" must be selected:
planned
started
locked
developed
published
released
reverted
archived.
in what requirements we will switch over from one to other?
Thanks,
muralireleased status is required for scenario.... other names are self explanatory.
-
SC State in Transport Studio!
Hi people/collegues,
I am trying to use NWDI.
step1. A track is configured. -> OK
step2. Create a SC and adding dependencies (Production State: developed or planned). -> OK
step3. Adding an SC to the track -> OK
Going to the Transport Studio and after check-in the dependencies,my SC is directly in Assembly and not in Development . Why?
Any advice? It is important.
Thanks in advance for your replies.Thanks for your replies.
My track definition contains the SCs for the development and the development system is checked in the runtime systems of the track.
Is not possible that my SC is in "assembly" because it is considerates as an unit assembly at the beginning?
Then only the DCs could be change the own status from dev to consolidation?
Best regards,
Mirco. -
PRODUCT AND SOFTWARE COMPONEBT VERSION
Hi Gurus,
I am using SAP PI 7.0 with SP .
Actually i have to create one product with my own name and one SWCV with name E-FILING GB.
But this SWCV already exist in SLD.
Now I am uing this SWCV and SAP HR 6.0 in IR by importing it from XI Standard Content.
In ID, I am using Integration Scenario by importing it from IR. Where I can get one application component SAP ERP 6 and one Templet with two different roles.
I have assinged one Business system to SAP ERP 6 application component on A2A tab and one party and one service on B2B tab.
And two Business services to other party.
I have added SWCV SAPHR 6.0 to SAP ERP 6 Standard pruduct in SLD.
But any where I not using the product which I created in the SLD.
What is the impact of this on the ID objects?
How to add a existing SWCV to the product which I created in SLD?
Regards
SreeniHi,
>>What is the impact of this on the ID objects?
>>How to add a existing SWCV to the product which I created in SLD?
create your own product and own SWCV
then if you want to use objects from any standard SWCV just
add dependecies and you will be able to reuse objects from those
standard
that's how you should do it
Regards,
Michal Krawczyk -
SNC 5.1 swcv and standard content
I am working on snc 5.1 scenarios ..... here i am not able to find the product associated with my swcv snc 5.1 and xi content snc .....
Hence due to this i am not able to add the product and associated swcv in technical and business systemHi,
check the catalog.
reg
suresh
Maybe you are looking for
-
How can I save transparency/inner glow effects when exporting to jpg?
I'm very new to InDesign. I increased the noise levels in inner glow in 'Effects' to create a textured look to my document (I wanted a paper texture and found this method on Google) but when I exported to pdf or jpg, I realized that my transparency e
-
HELP! Can't see the System Preferences
I tried to launch the System Preference application and all I get is a white window, you can't see the actual icons. This also happens in the Preview as well as the Console application. I tried a clean reinstall of my OS but still doesn't work. I als
-
Hello, I have problems when I copy material from my old DV camera to iMovie. The material on the Dv tape was edited but when I copy it back to iMovie it is one long clip. Anyway the clips are not ending up in the right order! I have Mac 10.8.5 OSX an
-
Hi All, I am installing SAP Production with HA option, I installed ASCS, DB and CI on my virtualhost1, now I want to install the DI on virtualhost2 on server2. But I am getting problem in select parameter screen. In the screen when we have to provide
-
HI all Service profile & response profile are attached to product in SLFN transaction type. How to get that (service & response profile ) from product for particular ticket. Edited by: swapnil dharia on May 13, 2008 10:21 AM