Production supply area (PSA) and supply area

Hi,
Is there any difference between supply area and Production supply area. it woul be good if you could explain me the difference.
Thanks,
Maxx

Both are same
Production Supply Area is the link between Warehosue Management and Production function.
Production supply areas (PSAs) are used for material replenishment and are situated directly on the shop floor in the production department. The supply area groups work centers near production storage bins based on the material staging methods. You need to enter the PSA in the work center master data.
http://help.sap.com/saphelp_46c/helpdata/en/c6/f8412f4afa11d182b90000e829fbfe/frameset.htm
Hope this helps.
An area on the shop floor where material is provided that can be directly used for production.
The supply area is used, for example, in KANBAN production control and for material staging using Warehouse Management (WM).
Proposed Supply Area in Material Master Record                                                                               
The supply area is used as an interim storage area on the shop floor    
     which is used to provide materials directly at the production line.                                                                               
The proposed supply area is mainly used for KANBAN materials that are   
     only or usually provided at one supply area in a plant. Here, this supply
     area can be easily saved in the system.                                                                               
The proposed supply area is used, for example, to determine the supply  
     area for the dependent requirements of a material.                      
     The supply area in the dependent requirements of a material is required:
     o  to enable the system to calculate the KANBAN control cycles          
        automatically                                                        
     o  to enable you to select requirements in the pull list with reference 
        to a supply area

Similar Messages

  • WHen I first installed iOS 6 the App Store crashes...and now having iOS 6 for 2 weeks now, all my apps are buggy and now are crashing! Safari and built in apps are becoming slow and crash. I hate how apple leaves iPod touch 4g and iPhone 4 in the dark.

    WHen I first installed iOS 6 the App Store crashes...and now having iOS 6 for 2 weeks now, all my apps are buggy and now are crashing! Safari and built in apps are becoming slow and crash. I hate how apple leaves iPod touch 4g and iPhone 4 in the dark and basically force us to upgrade to newer devices. Apple could of done better with the update and needs to resolve these issues.

    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    The App store crashing is a known problem.
    IOS 6 App store crash: Apple Support Communities

  • I converted some songs in iTunes to work with an eMusic device.  I'd like to delete them, but I'm not sure which of the duplicated songs to delete.  Some titles are black and some are gray.

    I converted some songs in iTunes to work with an eMusic device.  I'd like to delete them, but I'm not sure which of the duplicated songs to delete.  Some titles are black and some are gray.

    let's just doublecheck some things quickly. do any of the affected songs play in itunes at the moment? if so, when you play them, do they ask to be authorised?
    if so, does the authorisation go through successfully, or do you get an error message? (if you get an error message, let us know what it says. include error message numbers if you're getting any.)
    if the authorisation seems to go through successfully, with the authorised songs sync to the ipod?

  • I just upgraded to iPhoto '11.  When it was finished many pictures do not appear.  I have a black box but the information for the picture is still there.  Some are raw and some are jpeg.  Also lost all albums.  Can anyone offer assistance?

    I just upgraded to iPhoto '11.  When it was finished many pictures do not appear.  I have a black box but the information for the picture is still there.  Some are raw and some are jpeg.  Also lost all albums.  Can anyone offer assistance?  Using iOS 10.7.5

    Apply the two fixes below in order as needed:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - run Option #4 to rebuild the database.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Some Artwork images are shown and some are not, in Finder ???

    I scan the CD Cover of my music CD that I put in my iTunes (all with the same scanning setting; size, resolution, JPG...). When I go in the saved folder (Album Artwork) in Finder, some images are shown and some are not (even in Cover Flow), for those who are not, they only show a default image of a little boy with JPEG written in the center. When I go in iTunes, the image Artwork are OK, it's only in Finder that some are shown and some are not. In Finder, when I click for more info on the file, all the info seem OK and I see the preview image as it should. The bug is only in Finder.
    What is the problem, and how can I fix that ???
    Thank's

    Buz,
    If you select one of the images for which you can't see the thumbnail, Control + Click and select "Get Info". Can you see the thumbnail Preview in that view (Expand it if necessary)? What are the Sharing & Permissions at the bottom?
    Chris

  • I have Prem. Elements 12.  I am trying to add audio media.  I know where the audio files are located (using GET INFO while in iTunes), and when I try to add certain audio files, some are accepted and some are not.  In one case, when I opened a particular

    I have Prem. Elements 12.  I am trying to add audio media.  I know where the audio files are located (using GET INFO while in iTunes), and when I try to add certain audio files, some are accepted and some are not.  In one case, when I opened a particular folder, the song was not listed, even tho' the song is there when using Windows Explorer.  This happens with mp3 and mp4 and just wav files.  Some audio are accepted, most are not.  I get that codec is not installed error message, too.

    Perhaps it would be helpful for you to view the page source code of this page
    http://www.alanwork.com/
    As you can see, the submenu code links are immediately below the top level code, and are
    wrapped in their own  <UL> </UL> tag pairs.
    Hope that helps

  • Text messaging some are green and some are blue does that reference that they have orhave not been received

    Some of my text messages are green and some are blue,does that reference some delivered some not.  Why is there a difference in color.  Some of my texts seem to not go through

    Blue = iMessage...
    Green = Text message... SMS
    Using Messages  >  http://support.apple.com/kb/HT3529

  • ARE-1 and Non ARE-1 updation

    Hi,
    In MM cycle where we can update the materials in ARE-1 and Non ARE-1 register. Is this available in SAP.

    Hi,
    Check these SAP notes
    - Note 1270637 - Change in heading and alignment corrections for ARE1 form
    - Note 1014967 - ECS and other duties in ARE1, ARE3 transactions and reports
    - Note 1034008 - Budget
    - Note 1171753 - Excise base zero when excise invoice created in background
    - Note 1035545 - Excise base amount is not updated in table J_1IEXCDTL
    SAM

  • HT4976 why some messages are received and others are read ?

    I have an iPhone and I've been sending imessage to other people with iPhone.  Some messages are delivered and some are read.  What is the difference and why is this happening ?

    Depends on the receiver. They can set their read receipt to on and you will get read on your end when they actually open up the message app to read it. If they have read receipts set to off then all you will get is a delivered even if they read it.

  • Book area 01 and Group area 03

    Hi,
    I understand that area 01 and 03 are normally identical and any posting done to an asset will be posted in both areas.
    Hiowever, I have a situation where values in area 01 and 03 are different. This is an AUC asset and I will be transferring the valuise from AUC to fixed asset. But since both areas are different, I will not be able to zerolized both areas 01 and 03. And will not be able to close the AUC asset.
    How do I rectify this ? Can I change a settings or new TTY to post only to 1 area to make both values in 01 and 03 the same ? After which i will transfer the AUC to FA.
    And how do i close the AUC if there is still a small balance in one of the areas ?
    Example :
    Area 01

    Example
    Area 01     amount 10,300
    Area 03     amount 10,500
    I will have a balance of 200 in area 01 if I only transfer 10,300 from AUC to FA. Anf I will not be able to transfer the full ampunt 10,500 as system will throw an error.
    This issues arises from different currency in GR and IR.
    Please advise how to correct this problem. And also advise me how to prevent this type of error in future.
    Thanks.
    Angel

  • Some photos in iphoto are missing and there are blank thumbnails which when i try to open them show an exclamation sign

    some photos in iphoto are missing and there are blank thumbnails which when i try to open them show an exclamation sign

    The exclamation make is an indication that iPhoto has broken the file path to the original photo.
    Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • HT5271 My videos arent playing on my safari and it says "blocked plug in".  I go to download an updated version of flash but it doesnt help, and It keeps saying it over and over.  I also cannot log in to previous webpages.  Cookies are enables and so are

    My videos arent playing on my safari and it says "blocked plug in".  I go to download an updated version of flash but it doesnt help, and It keeps saying it over and over.  I also cannot log in to previous webpages.  Cookies are enables and so are pop ups

    Uninstall the old Flash plugin versions > Troubleshoot Flash Player | Mac OS
    And turn OFF Extensions in Sarfari > Prerferences > Extensions. Quit and relaunch Safari to test.
    And check to see if Safari is running in 32 bit mode. Right or control click the Safari icon in your Applications folder then click Get Info. If the box next to:  Open in 32 bit mode  is selected, deselect, quit then relaunch Safari.

  • What are unicode code points and how many are there and which are surrogate

    what are unicode code points and how many are there and which are surrogate

    Hi
    see the links
    The Link will be helpful to you.
    Re: Upgrade 4.6 to ECC - What are the responsibilites
    regarding Unicode influence in Standard programs
    Very good document:
    http://www.doag.org/pub/docs/sig/sap/2004-03/Buhlinger_Maxi_Version.pdf
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d37d1ad9-0b01-0010-ed9f-bc3222312dd8
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/589d18d9-0b01-0010-ac8a-8a22852061a2
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f8e316d9-0b01-0010-8e95-829a58c1511a
    Reward points for useful Answers
    Regards
    Anji

  • Weblogic datasource - Created "1" resources for pool "DataSource", out of which "1" are available and "0" are unavailable.

    I am performing some transactions with java application deployed on weblogic. I faced some issue of getting the transaction response with some delay. I found these below mention messages logged into the managed server logs. 
    Following is my datasource settings
    Initial Capacity: 2
    Maximum Capacity: 100
    Capacity Increment: 20
    Anyone have idea why these following errors coming.
    ####<Nov 26, 2013 2:25:41 PM PKT> <Info> <Common> <machine1> <managed_server> <[ACTIVE] ExecuteThread: '25' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <BEA1-1B6BE1217D118A188C49> <> <1385457941513> <BEA-000628> <Created "1" resources for pool "DataSource", out of which "1" are available and "0" are unavailable.>
    ####<Nov 26, 2013 2:25:42 PM PKT> <Info> <Common> <machine1> <managed_server> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <BEA1-1B6EE1217D118A188C49> <> <1385457942413> <BEA-000628> <Created "1" resources for pool "DataSource", out of which "1" are available and "0" are unavailable.>
    ####<Nov 26, 2013 2:25:43 PM PKT> <Info> <Common> <machine1> <managed_server> <[ACTIVE] ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <BEA1-1B71E1217D118A188C49> <> <1385457943792> <BEA-000628> <Created "1" resources for pool "DataSource", out of which "1" are available and "0" are unavailable.>
    ####<Nov 26, 2013 3:12:28 PM PKT> <Info> <JDBC> <machine1> <managed_server> <[ACTIVE] ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1385460748433> <BEA-001128> <Connection for pool "DataSource" closed.>
    ####<Nov 26, 2013 3:12:28 PM PKT> <Info> <JDBC> <machine1> <managed_server> <[ACTIVE] ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1385460748433> <BEA-001128> <Connection for pool "DataSource" closed.>
    ####<Nov 26, 2013 3:12:28 PM PKT> <Info> <JDBC> <machine1> <managed_server> <[ACTIVE] ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1385460748433> <BEA-001128> <Connection for pool "DataSource" closed.>
    ####<Nov 26, 2013 3:12:28 PM PKT> <Info> <JDBC> <machine1> <managed_server> <[ACTIVE] ExecuteThread: '19' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1385460748434> <BEA-001128> <Connection for pool "DataSource" closed.>

    i know this,
    The cause of the problem is: owing to the client's operations staff to modify the datasource ,and reployed
    thinks

  • When i play music on my ipad mini no sound comes out and when i use the volume button it says headphones like headphones are connected and they are not.

    when i play music on my mini no sound comes out, so i push the volume button thinking it was turned down and it keeps saying headphones like headphones are connected and they are not even plugged in>

    Hi Try  a, reboot, press & hold power button & menu, button, hold both down until you see Apple  Logo. Before  you do Reboot, Sign out, of itunes on ipad then sign, back in this may help. Cheers Brian

Maybe you are looking for

  • File XI Proxy

    Hi all, We are facing a weired problem while processing the documents(1000 documents in a file) in the File2Proxy Interface.... While the File adapter is active and running, we are writing the files through FTP to SAP Directory and File adapter picki

  • Problem with space and toURI()

    Hi, My program is working #1 when I create a MediaLocator like that: mediaLocator = new MediaLocator(file.toURL()); But I know that toURL is depreciated so I changed it to mediaLocator = new MediaLocator(file.toURI().toURL()); And now, when my path c

  • Nokia Orange UK 6500 Slide - Restriction code Pls

    I got a new phone from UK and was trying to use it in USA, when I've inserted the SIM and trying to access the phone, it asks for "RESTRICTION CODE", does anyone can help me in this. History: a) Got the phone b) Bought unlock code c) Seller provided

  • HT3606 How to update iTune of my Mac 10.5.8 ?

    (The file "iTunes Library.itl" cannot read because it was created by a newer version of iTunes.) This shows up and cannot open iTune anymore. Why? What shall I do?

  • How far back does Spotlight look in the Calendar ?

    When I search my calendar with Spotlight it looks as if it goes only 1 year back. Is that correct ? Cheers, Antonio.