Production suppoort issues in IP

Hi Friends,
What are the mostly common issues in the prodction system for IP (Integratted Planning)
Please share with me which u have faced in your project.
Please send met any useful documents  on prodction support issues/
It would be great help for me.
Will assign the points.
Best regards
SAP

Hi,
Community can help with the problems they faced in implementation and in support. But, its not encourages sending documents.
Points is not always the right way to get documents.
Regards,
-Sonti-

Similar Messages

  • Post production support Issues

    Gurus,
    Can anyone provide me with PA/OM production support issues with the solutions..will be obliged
    Regards
    Eliz

    Hi Eliz,
    For the post production issues like,
    1. create new employee sub groups,
    2. create new payroll area
    3. create new wage type( transport allowance) in infotype15
    4. delimit the wagetypes which may allowances will not pay future.
    5. payslip error
    6. employee getting double pay
    7. configure of new nationality
    8. configure of addtional dependents
    9. create new infotypes for schools, dependent visa's etc.
    Hope you cleared
    Vijay

  • CAn anyone send me documents related to key production support issues

    CAn anyone send me documents related to key production support issues in SD and MM
    thanks &regards
    aman

    Hi Priya,
    Please find the below link to have a very good stuff on Foreign Trade;
    http://help.sap.com/bp_bblibrary/500/html/G09_ForgTrade_EN_IN.htm
    Please Reward If Really Helpful,
    Thanks and Regards,
    Sateesh.Kandula

  • Hi All, can i have some production support issues with rootcasue and resolution for SAP TM?

    Hi All, can i have some production support issues with rootcasue and resolution for SAP TM?
    Thanks,
    Sreenivas

    Hi Sreenivas,
    I would recommend that you read the Rules of Engagement and other documents in the Getting Started link (top right) before posting anymore.  Your Discussion will most likely get reported as non-specific and get removed.  If you have a specific problem with TM, please post it in a new thread with error messages, version and SPs installed, and how the error occurs and what you are trying to get TM to do.
    There are a lot of resources available in the TM Overview page which can help, so start there and maybe also look at some of the MKS (Monday Knowledge Session) recordings which should also be listed.  There are also a lot of experienced people who can help resolve issues your TM installation, but you need to provide enough information on the problems you are having.  If you are just looking for information on past problems, do a Search or simply browse through past Discussions which are marked with a green Check (Correct Answer).
    Regards, Mike
    SAP Customer Experience Group - CEG (and a Moderator)

  • All Office products Refresh issue

    Hello,
    I'm having a reoccurent problem with some of our users affecting all office products, the issue is any office application randomly would not refresh properly and parts of the window would be missing and not refeshing, e.g when in outlook, part of the application's
    window would freeze while they are scrolling and they would need to minimize the program and open it again. I know it is not a hardware problem as I have thoroughly checked drivers and it is happening to different machines (even a Mac with Windows mirror),
    I have tried repairing and reinistalling the office products but to no avail. This is only affecting office products.
    Thanks,
    Ash

    Hi,
    This looks like an issue of your graphics driver. I understand you have already checked drivers, but please make sure your graphics driver is up to date and try again.
    Some add-in conflicts might also cause this kind of issues. You might want to start Office applications in
    safe mode and see if issue presists.
    To open an Office documents in safe mode, just hold down the Ctrl
    key and open the Office documents.
    Hope this helps.
    Thanks,
    Ethan Hua CHN
    TechNet Community Support

  • Problem Posting Receipt From Production and Issue for Production

    Hi Everyone,
    I am posting Receipt from Production and Issue for Production through DIAPI in SAP Business One 2007A SP00 PL03.
    I am using following lines of code
    oDocument.Lines.SetCurrentLine(0);
    oDocument.Lines.BaseEntry = int.Parse(BaseEntry);
    oDocument.Lines.Quantity = double.Parse(Quantity);
    lRetCode = oDocument.Add();
    The Document adds perfectly but when I open the document in SAP Business One i am not able to see the Order Number at Line level on which this document was Based.
    I identified the problem being Order Number Column being binded to BaseRef field hence form is not able to Show the Order Number and we cannot set BaseRef via DIAPI since the property to set that field is not exposed.
    I donot want to update the table through a Recordset Update Query. I would appreciate if the property to set that field is exposed by SAP or any other workaround can be put forward by anyone who has faced the same problem.
    Thanks
    Kapil

    Do you need to set
    oDocument.Lines.BaseType = 17 (if this is sales order)
    and then baseentry = baseentry....etc
    If you bind the base entry correctly it should alwasy shows the base document on both database as well as front end. I have never had any problem with this
    Sincerely

  • Production Order Issue with Qty conflict

    Hi Friends,
    i have a issue with a production order fro which we built the product and the finished goods is moved to storage location, i have status set on my Production order as REL  PRT  CNF  DLV  PRC  GMPS MACM SETC. My order was for 1unit,In the quantities window , total qty shows as 1 pc and delivered as nothing (blank). Its not active were physically i can change , so how do i add the deliverd qty field by 1.And what could be the issue? PLS help Points will be rewarded.

    This Delivered field in CO02-Dates/Qtys tab will get updated automatically , when the order qty is delivered to stock.
    We can not manually update that.
    Have you checked whether the storage location stock has been increased ? In MMBE , you place the cursor on the stock qty and choose Environment - Production orders or Material Movements and check , whether a GR has been made against this order.
    Regards,
    Sheik

  • Windows Server 2008 SP2 X86 Product Key Issue

    I am trying to create a VM using a Template, but facing an issue with respect to Product Key.  The VHD I am using is of
    Windows Server 2008 SP2 X86.  If I do not provide Product Key in the Template/Guest OS Profile, the Virtual Machine creation fails even before starting. Seeing this behavior, I added a dummy key to the Guest OS Profile/Template which allowed
    me to deploy the machine, but the VM gets stuck at Customization before failing. When I take the remote console of the VM, the Error I see at the Remote Console is:  
    Windows could not parse or process the unattend answer file for pass. The settings specified in the answer files cannot be applied. The error was detected while processing settings for component [microsoft-windows-shell-setup]"
    So, I am confused now what to do.
    Is dummy key supported?
    Do I need to provide the actual key in the Template/Guest OS Profile?

    You should be able to evaluate this software for 180 days.  
    Here are some info:
    http://portal.sivarajan.com/2010/10/windows-2008-r2-evaluation-period-and.html
    http://portal.sivarajan.com/2010/08/verify-and-extend-windows-2008.html
    Santhosh Sivarajan | MCTS, MCSE (W2K3/W2K/NT4), MCSA (W2K3/W2K/MSG), CCNA, Network+ Houston, TX
    Blogs - http://blogs.sivarajan.com/
    Articles - http://www.sivarajan.com/publications.html
    Twitter: @santhosh_sivara - http://twitter.com/santhosh_sivara
    This posting is provided AS IS with no warranties, and confers no rights.

  • Query based on production order,receipt for production and issue for produc

    hello  sap experts i need a query on
    this is my query but iam not getting correct result could anypne help out  any relation is wrong in this pls verify it and reply asap .
    SELECT T0.[DocNum], T0.[ItemCode], T0.[PlannedQty], T1.[ItemCode], T1.[PlannedQty], T3.[Quantity], T5.[Quantity]
    FROM OWOR T0  INNER JOIN WOR1 T1 ON T0.DocEntry = T1.DocEntry, OIGN T2 INNER JOIN IGN1 T3 ON T2.DocEntry = T3.DocEntry, OIGE T4 INNER JOIN IGE1 T5 ON T4.DocEntry = T5.DocEntry
    WHERE T1.[ItemCode]   =  T3.[ItemCode] and  T1.[ItemCode]   =  T5.[ItemCode] and T0.[PostDate] between [%0] and [%1]
    GROUP BY T0.[DocNum], T0.[ItemCode], T0.[PlannedQty], T1.[ItemCode], T1.[PlannedQty], T3.[Quantity], T5.[Quantity]
    ORDER BY T0.[DocNum]
    regards
    Jenny

    Hi,
    Here is another suggestion.
    select t0.docnum,
    case 
    when t0.status = 'P' then 'Planned'
    when t0.status = 'R' then 'Released'
    when t0.status = 'L' then 'Closed'
    when t0.status = 'C' then 'Cancelled'
    else t0.status end as 'Production Order Status',
    t0.ItemCode as 'Parent Item', t0.PlannedQty as 'Planned Parent Item',
    T1.ItemCode as 'Component Item', T1.PlannedQty as 'Planned Component Item',
    (select T2.Quantity
    from ign1 t2
    where t0.itemcode=t2.itemcode and t0.docentry = t2.baseentry) as 'Received End Product',
    case
    when t1.issuetype = 'B' then 'Backflush'
    when t1.issuetype = 'M' then convert(varchar(15), t3.quantity)
    end as 'Issued Component Item'
    FROM OWOR T0
    INNER JOIN WOR1 T1 ON T0.DocEntry = T1.DocEntry
    left join ige1 t3 on t1.docentry = t3.baseentry and
    t1.linenum = t3.baseline
    Somehow I get the feeling it would make more sense to have it in 2 separate reports. But if it works for you it's good.
    Let us know how it goes and if these are indeed the reports you are looking for.
    Jesper

  • Product category issue

    Hi
    We are upgrading from SRM 4.0 to SRM 7.0 system. we are facing some issues in Shopping cart
    1. Product category is getting defaulted in SC for all the line items. we have not maintained default in extended attributes and in default settings in SC  also we tried to remove Product category but it is mandatory field and system is not allowing us to give blank and when i have given product category at SC Default settings it populates to all line items. Our requirement is product category should be blank at SC level and user will select. How to find the solution for this
    2. G/L Account is not populated based on the product category ( we have maintained at config level for product category and G/L Account but it is not populating when SC is created with that product category
    Appreciate your help
    Regards
    Sandeep

    hi
    last product category or first product category is showing as default for all your sc. before you order you can change it right .
    or create a dummy product category and make it default.
    Product category discription in the shoping card
    br
    muthu

  • JDBC production server issue

    Hello All,
    We have four J2EE engine in productions and we have created JDBC connections on two of those. Both sever JDBC connection failed saying DataSource name already bound. So we deleted datasource and created new with another name. again it fails with same error. It keeps on adding these names in JNDI registry, even if datasource are not there. Now is there a way to remove this names other than server restart as this is a production server we can not restart the server. Please let me know if it can resolved in same way ,or if there are some other issue because of which it is failing.
    Thank,
    Nitesh Shelar

    Closing....
    Solution Found None

  • Help with production jvm issues at customer site

    Following is a brief overview of two production issues experienced by an Oracle customer. Customer is currently running 32 bit Java 1.5_20 on Solaris 64 bit OS.
    1)     OOM heap issues – SR #3-2611053901 – Recently we have been seeing OOM errors due to heap space. What we have seen is that some of the instances are not able to free up any memory space even after full GC, which results into a series of full GC’s back to back and eventually leads to OOM. During this time when continuous full GC is going on, we have seen the TCP connections and active JDBC connections shoot up and also lots of stuck threads. This error occurs during peak hours.
    This is the output just before OOM. Just to be clear, this line is printed as last line of Full GC which meant that OOM happened right after Full GC:
    [PSYoungGen: 111616K->82323K(172544K)] [PSOldGen: 1865727K->1865727K(1865728K)] 1977343K->1948051K(2038272K) [PSPermGen: 209111K->209061K(210944K)] GC time is exceeding GCTimeLimit of 98%, 13.3644395 secs]
    2)     OOM swap space- SR: #3-1724941721 – From time to time, we get Exception in thread "CompilerThread0" java.lang.OutOfMemoryError: requested 32756 bytes for ChunkPool::allocate. Out of swap space?’ error in our production. Mostly this error occurs during off hours or off-peak hours. When this happen, there is plenty of heap and perm memory available which indicates that this is a native memory error. We already put two workarounds suggested by Oracle i.e. -XX:CodeCacheMinimumFreeSpace=8m -XX:ReservedCodeCacheSize=128m but still running into this problem.
    What we are looking for:
    1)     Recommendations on tuning our config parameters -
    These are some recommendations we discussed internally. Please validate these recommendations and provide us the recommended values. We would also welcome any new recommendation on updating other parameters if that will help with our issues.
    •     Change Xmx to 2048m and MaxPermSize to 512m
    •     Specify ratio of young generation to old generation (-XX:NewRatio), and possibly survivor spaces.
    •     Use Concurrent old generation collector (-XX:+UseConcMarkSweepGC), with a compatible parallel young generation collector (-XX:+UseParNewGC)
    Our current config settings are:
    JAVA Memory arguments: -Did=chaserels-cm21 -Xms1024m -Xmx2048m -XX:MaxPermSize=1024m -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:CodeCacheMinimumFreeSpace=8m -XX:ReservedCodeCacheSize=128m -verbose:gc -Dcom.sun.management.jmxremote=true -Dcom.sun.management.jmxremote.port=1641 -Dcom.sun.management.jmxremote.authenticate=false -Dcom.sun.management.jmxremote.ssl=false -Djava.awt.headless=true -Dfile.encoding=ISO646-US
    In a subset of servers, the settings are same as above but for MaxPermSIze, which is set to -XX:MaxPermSize=512m
    2)     Diagnostic help in how to further narrow down to the problem and what tool to use to gather heap dumps
    We have tried to take heap dump using jmap on our production servers when OOM occurs due to heap but most of the time, we run into an exception (attached - which is probably an unresolved jvm bug). While we researched some alternatives to jmap for taking heap dumps, most of these require changing the start-up scripts or installing the tool on production system which may have a performance overhead. What we want is a least intrusive tool which could provide us heap dumps/snapshots without much overhead and could be preferably used remotely. If there are other ways of collecting data than heap dump, we could also use them.
    Let me know if you have any questions or need any data.
    Thanks for your help.
    Error from heap dump :
    Exception in thread "main" sun.jvm.hotspot.debugger.UnalignedAddressException: Trying to read at address: 0xfec080a7 with alignment: 4
    at sun.jvm.hotspot.debugger.DebuggerUtilities.checkAlignment(DebuggerUtilities.java:40)
    at sun.jvm.hotspot.debugger.proc.ProcDebuggerLocal.readCInteger(ProcDebuggerLocal.java:309)
    at sun.jvm.hotspot.debugger.DebuggerBase.readAddressValue(DebuggerBase.java:425)
    at sun.jvm.hotspot.debugger.proc.ProcDebuggerLocal.readOopHandle(ProcDebuggerLocal.java:326)
    at sun.jvm.hotspot.debugger.proc.ProcAddress.getOopHandleAt(ProcAddress.java:96)
    at sun.jvm.hotspot.oops.Oop.getKlassForOopHandle(Oop.java:198)
    at sun.jvm.hotspot.oops.ObjectHeap.newOop(ObjectHeap.java:346)
    at sun.jvm.hotspot.runtime.JavaThread.getThreadObj(JavaThread.java:333)
    at sun.jvm.hotspot.utilities.AbstractHeapGraphWriter.writeJavaThreads(AbstractHeapGraphWriter.java:113)
    at sun.jvm.hotspot.utilities.AbstractHeapGraphWriter.write(AbstractHeapGraphWriter.java:98)
    at sun.jvm.hotspot.utilities.HeapHprofBinWriter.write(HeapHprofBinWriter.java:399)
    at sun.jvm.hotspot.tools.JMap.writeHeapHprofBin(JMap.java:133)
    at sun.jvm.hotspot.tools.JMap.writeHeapHprofBin(JMap.java:143)
    at sun.jvm.hotspot.tools.JMap.run(JMap.java:71)
    at sun.jvm.hotspot.tools.Tool.start(Tool.java:204)
    at sun.jvm.hotspot.tools.JMap.main(JMap.java:126)

    1)     OOM heap issues – SR #3-2611053901 – Recently we have been seeing OOM errors due to heap space. What we have seen is that some of the instances are not able to free up any memory space even after full GC, which results into a series of full GC’s back to back and eventually leads to OOM. Which would be exactly what would happen if there were many objects which were not eligible for collection.
    Causes would be either a bug (something not releasing something it should) or because the server is overloaded.
    If there were no code changes it could still be a bug that has now only become apparent due to changes in usage patterns.
    If that is the case then such bugs can usually be made more apparent by reducing the maximum heap. Doing that will cause it to occur faster.

  • Production version issue.

    Dear Guru's,
         I have created two version in material master.
    also I have changed in "opl8"{ production version = Manual selection of production version}
    but still system is not asking me for production version at the time of creation of production order.
    system is asking me routing only
    now I am selecting version from function>read master data ( production version).
    please sugest me wat i have to do for pop up of production version at the time of production order creation
    and also system is not giving me any request no. at the time of save the changes in IMG.what will be issue
    Nilesh

    Dear,
    please see that PV is applicable in terms of lot size, dates and status
    if both
    PV are valid wityh respect to the above then only upi will get the pop up for PV selection.
    MRP4 setting is alosm required.

  • Co-Product Palnning issue

    Hi PP Gurus
    Just one help required on one issue
    My client requirement is regarding co-product planning
    I will explain the scenario
    Suppose we hav etwo products A & B  which are finished materials.
    A Has component X in its BOM
    B has component Y in its BOM.
    X is also semi finished material and Y is the co-product.
    Client requires that when MRP run is carried on B and Y is not in stock , system should generate planned order for X so that Y will also be formed as co-product as if planned order for Y is formed, it is of no use as it is co-product.
    I request you to suggest some options to meet the client requirements
    Thanks
    Harleen

    Dear Kuar,
    For co product u can not create any order. if u want co product is to be planned then u should bring it out from co product. and maintain MRP type PD then if y is not in ur stock it will be planned. But as a co product u cant have any planned order/production order for this
    sree

  • Product volume issue in Opportunity transaction

    Hi All,
    We are having an issue in our CRM 6 Opp transaction. Even though the user provided input as 100% for the product, the product volume is zero. Is there any notes or enhancement we need to apply in this issue. Please advise.
    Rgds
    Sid

    Hi,
    Check whether u r defined probability % or not.
    there is no enhancement is required for this, it is sap standard functionality
    Regards
    Kumar

Maybe you are looking for