Production Versions- storage location

Hi All
Material A0001 is an in-house product in my company, and the material [A0001] is also issued as a component for other Finshed Good [A000FG] inhouse product.
Actually the scenario is
User expects the A0001 material to automatically GR at in-transit storage location 000X.
When ever the material A0001 is issued as a component to A000FG. The material A0001 whould  automatically  issued as a pick items from Storage location 000Y or  backflush as kanban items from Sloc 000Z.
Is options we can do the above setup through PRODUCTION VERSIONS.
If it is how can I proceed to set that, Please provide me a guidance.
or else please tell me other options to perform the above scenario.
Thanks in Advance

hi madan,
Maintain the receiving storage location 000X for A0001 in production version screen of MRP4 view.
and second scenario maintain production storage location  000Y for the the component of A0001 in the BOM of A000FG
regards
Pravin

Similar Messages

  • Incorrect Storage Location Detemined in Production Order

    Hi There,
    When convert planned order to Production order, storage location is determined for component material.
    Till 4.7 system, we see that the system was following below sequence for determination storage location:
    1)     Storage location set into BOM item
    2)     Storage location determined by WC.
    3)     Storage location set into material master.
    However, in the upgraded ERP 6.0 system we see that the above sequence is not followed any more.
    1)     Storage location determined by WC.
    2)     Storage location set into material master.
    3)             Storage location set into BOM item
    Is our understanding correct? How can be bring back the old sequence?
    Thanks in advance for your support.
    Kind Regards,
    Prakash

    Hi Anish,
    The issue is that in earlier system it was '2' as well, still the storage location was taken from BOM.
    But, in ERP 6.0 it is not taken from BOM.
    We do not want to change the master data for this purpose, but need a reason why SAP has changed this behaviour?
    Regards,
    Prakash
    Edited by: Prakash Ayer on May 11, 2009 5:01 PM

  • Add storage location field into report COOIS

    When i check the Production order Storage Location is showing under Goods receipt Tab.When i execute the order COOIS Storage location field is empty.
    Where and what to configure to pull storage location into report COOIS?
    Thanks
    Rafi

    Hi Mohammed,
    Ideally it should come, field storage location is fetch from the GR tab from production order. May be PP guy can help you much better.
    Regards
    Mohit

  • REM Prod Version: How to hide/disable Storage Location fields

    Hi,
    We are using REM.
    For Issue storage locations, we are maitaining str location in BOM/MRP2 View.
    For Receving Str locatiom, we are maitaining str location in MRP2 View.
    Similarly, for REM assemblies, system provides str locations fields in Production Version.
    Requst to guide on following points:
    1. What is the application and priority of Strorage locations in Prod Version (PV)?
    2. Can the Str locations in PV be hidden/disabled?
    Regards
    Nitin

    Hi NITIN,
    <b>For receiving storage location of finished goods in REM system gives priority for selecting stor loc as below.</b>
    Production version (Rec.stor.loc) -> MRP view (prod stoarge loc)
    <b>For issue storage location of components  in REM system gives priority for selecting stor loc  as below.</b>
    BOM (issue storage loc) --> MRP view (prod stoarge loc)  -->Production version (Rec.stor.loc)
    why do u want disable the storage loc at production version.
    please close reward and close or else come back for more doubt

  • Production Order - Invalid storage location

    Hello,
    I have made a production order through mrp for a halb. The issue is that when I try to release the order it gives me a message that "storage location 3603 is invalid for material nthl****". In MM03 -> MRP2 in Issue stor. location the correct value of 3603 is showing. Material availability check on the production order is also ok. Please help.
    Regards

    During Availabiltiy Check it will check the issuing Raw Material/another halb - so no link
    You are saying in MMSC that storage Location is extended to 3603- ok no issue
    More over in MRP2 view you are saying the "Production Storage Location" with 3603 (here for this it will be behave as Receiving Storage Location) - ok no issue
    check in the Production Order "Good Receipt" subscreen GR Storage Location is "3603"
    Check whether the 3603 storage location is specific for the Plant to the Material it has extended *
    ( or is there a confusion with number zero and letter"O")
    Prabakaran K

  • Missing parts and production storage location

    Can the production storage location in the material master for a component on a BOM be set to blank to pull in all inventory in the plant when calculating missing parts in a production order? I am finding that the blank production storage location is NOT pulling in all inventory in all storage locations; I honestly think that is how it should work but would like to see what others think or have run into. Thank you very much!

    Hi Judith,
    This can be done by system to carried out Avilability check plant level instead of storage location  level.  For that plz do the settings as suggested by our member.
    Check the "No.Stor.Loc.Insp" in OPJJ for checking group and Checking rule combination and assign the same checking group to material at MRP view.
    Donot Assign  storage location for components  in material Master and  BOM item.
    Please try anf comeback
    regards
    pradeep

  • Material staging in production with IM and WM storage locations

    Hello,
    I have the following situation at hand in a Client.
    They use Process Orders and want to do material staging of the components.
    The Production Supply área is an IM managed storage location but the storage location of the components is WM managed.
    The staging should take place as pick parts (control cycle) transfering the components from the WM storage location to the IM production Storage location.
    Im not sure we need to use Deliveries instead of Transfer Requirements.
    Is this escenario posible and if so, how to configure it.
    Thanks for any reply.
    Aart

    Aart,
    For Transfer requirement creation for production order components WM staging please follow below steps.
    1.Activate PP interface in Warehouse number control for PP interface in Logistic execution.
    2.You need to assign WM replenishment movement type 319 against the production supply storage type.
    3.In production scheduling profile all necessary WM TR/TO configuration to be done based on your requirement.
    4.Create PSA in PK05.
    5.Create Control cycle in LPK1.
    6.Assign the PSA to production work centers.
    With above settings once production order is released TR gets created which could be converted to TO manually or automatically for further process.
    Br
    KK

  • Production Order - Component Overview - Storage location

    Hi,
    While i create Production orders, i do not see the storage locations for the components,listed in the component overview screen. I have maintained storage location & storage bins through MMSC transaction.
    Am i missing any config setting, so that the storage location will be visible in the Production Order.
    regards,
    K.Kumar.

    Hi
    You have to maintain the production storage location in the Material master (or) in BOM.
    In Material master MRP2 View, if you maintain the production storage location it is applicable where ever you use that material.
    In BOM-->Select the component >Go to item details> select the "Status/Lng text tab"--> here you can maintain the Production storage location. If you maintain here it is specific to this BOM only.
    Please check and revert.
    Regards
    Bala

  • Storage location & backflush must be automatically set in Production order

    Hi Guru's ,
    While creating production order the storage location and backflush for the Components (ROH Articles) inside the Production order are manually selected.
    Is there any way, where i can set them (storage location and backflush) as a default whenever i create a Producton order ???  This means whenever i enter the components in a production order the system must automatically show the Storage Location and backflush as ticked.
    Pls help on this thing ....
    Best Regards,
    Gurpreet Singh Saini.

    Hi,
    To set the backflush always then in the material master MRP2 view set backflush " Always".
    To set the automatic storage location then you can define the "Stock determination group".
    This is will be help full if ur keeping material in more then one storage location.
    If you are keeping in the single storage location then in the MRP2 view maintain the storage location in the "production storage location " filed.
    Regards
    Vijay

  • Put away to production lines directly, storage location control WM

    We are Using Storagelocation Control Functionality in WM
    We have below Storage locations
    RW01 - Raw Material Storing
    PD01 - Materials staged for Production Lines
    I have setup 001 as Standard Storage location and 002 as 'not copied to TR'
    Few materials are received directly to production lines instead of going to Raw material storage
    PO--> GR is posted for PD01
    Now TR got generated but doesnt have storage location in it, this is fine as per functionality
    When i try to convert to TO it is copying MP01 since it it standard storage location
    This is where we are getting 902 negative entries for MP01
    No TR creation but bin to bin transer only solution ????

    Any pointers ???

  • Deny production order release if component has no storage location

    Hi,
    when a production order is created, I want to deny the release if there is a component without a storage location.
    I looked at the PPCO* user exits, but I haven't found a suitable one yet.
    Could anyone help me?
    Thanks,
    Matthias

    Any ideas?

  • Storage location and Batch updation for components in Production Order.

    Hi Friends,
    After creating Production Order,need to update components with Storage Location(RESBD-LGORT) and Batch(RESBD-CHARG).
    Plese any one can help me by providing FM/BAPI for the same(Update Component level)
    Points will be rewarded.
    Thanks,
    Prb.

    Hi Prathap,
    Path - OCHA
    Condition type,access sequence, strategy type,
    Work on automatic batch determination. Assign standard search procedure to order type dependent parameter, check against manual entry.
    Make sort sequence for material by CU 70, tick ascending order, Then assign component in COB1, enter selection values and sort sequence. In finish product material master set automatic batch determination.
    System will copy the required material with batch & storage location, also check against manual entry.
    I think it will solve your problem.
    Regards,
    Suhas

  • To stock transfer  the RM to Production storage Location

    Dear All,
    I want to  stock transfer the RM from Store to production storage location after that I have to pick the material against Production Order from Production Storage Location.
    How I can carry out this scenario.
    I am trying through Pull list.
    please give ur valuable inputs.
    Thanks in advance
    Vijay Mankar.

    Hi Vijay,
      To tranfer the stock from store to Prod storage location , u can do in two ways,
    1.Pull list - By accesing the Pullist with the production order .if there is no enough stock to meet production qty at production storage location , system calculate the missing part and asks replenishment storage location. here u have to give your store as repl.storage location
    2. Enter tranfer posting.( MB1B)  - using this u can tranfer the stock dierctly from the store to prodution storage location. u have to use 311 Mvt type and define Rec storage location is store.
    3. Enter good issue MB1A -  u can pick the raw material with reference to your prodution order using 261 Movement Type.
    please reward if it helps
    regards
    pradeep

  • Storage Location in Production Order Component Overview

    Hi All,
    When creating a Production Order using CO0, the Component Overview will list out the corresponding BOM for the Finished Good.  We have defined a number of plants and storage locations.  I see here that the plant and storage location is automatically determined in the components overview.  I would like to set defaults for these, may I ask where in SPRO is this configured?
    Thanks in advance

    Hello
    Storage location in production order is pre-setting in bom component level/and MPR2 view,
    First priority is Bom Component level, i will transfer Production order only this BOM if maintianed here.
    second priorty is Material master date in MRP2 view, it will effected all components and all bom which used this components.
    Benny

  • [Help] - Wrong storage location in production order!

    Hello SAP Gurus and friends,
    I have a finish product with a BOM with only one Raw material. This Raw material is created for storage location 1001 and 1010, but in MRP2 view, I have defined "Prod. stor. location" and "Storage loc. for EP" 1010. When I create a production order for my finished product, system puts 1001 in the storage location of the component!!!
    Can someone please help me with this?
    Thanks in advance,
    Adelmo Silva

    Dear Adelmo Silva,
    Storage loc. for EP" 1010
    This setting is for External procurement materials
    you can find another storage location which is above of storage location for EP, here check for stoarge location mainatined
    or check in BOM item details, whether any storage location is defined
    Regards
    Madhu

Maybe you are looking for

  • Selecting multiple values from a search help

    Hi Experts Anyone knows if it is possible to select multiple values from a search help? Thanks Gaurav

  • Both nouveau and nVidia driver problems with Stellarium

    Stellarium v0.12.4 with either xf86-video-nouveau 1.0.9-1 or nvidia (latest driver) and an nVidia MCP78S (GeForce 8200) chip usually results in either distorted graphics and sometimes complete system lock-up. The nVidia driver is worse, nouveau somet

  • Open Item Management clearing docs

    Hello Experts, we have an account with open item management check on. There are some entries out on this balance sheet account. So these documents are sitting with open items. Users post offset journal entries on this account later. So now we have mu

  • Why JSTL change the encoding of response?

    Dear all, I use JSTL to display multiple language, and it can work fine. I also have a servlet to let the user to select the display language. All the request and response encoding is set to UTF-8, but I found that when user choose language to Chines

  • Epson Scanner Drivers

    With my new iMac using Mountain Lion 10.8.2, I find I cannot use my Epson Stylus Photo RX620 scanner using Apple Image Capture software. I can take an overview, but cannot capture the final scan because a scanner error occurs. It suggests updating th