Products from SRM to CCM

HI, ALL
while I do the case about the products in SRM transfer to CCM. (they are not one client) ,   I configured the XI according to the cook-book.  then  I run the repport BBP_CCM_TRANSFER_CATALOG  in SRM by SE38.  after running , the log show everything is OK.  but  , i cann't  find the SRM catalog and datas  in CCM.  why?
Thanks!!!
kind regards
Jesse

Jesse,
Please make sure that XI connection is active and Service Users have valid accounts.
Please check also the threads below:
http://help.sap.com/saphelp_srm50/helpdata/en/42/151D4193BB73ADE10000000A114B54/content.htm
http://help.sap.com/saphelp_srm50/helpdata/en/42/151D3893BB73ADE10000000A114B54/content.htm
BBP_CCM_TRANSFER_CATALOG  (product catalog)
Re: Material/service master catalog upload (ECC-CCM)
Re: Map to Procurement Catalog
Re: Short, long Description not showing up when loading Catalogs
transfering product master from EBP to CCM
Re: XI for CCM 2.0 and EBP 5.0 (SRM 4.0)
CCM SRM product catalog
Re: CCM help
extra characteristics in SRM product Catalog
product master transfer from EBP to CCM
CCM2.0 Config in NW2004s (PI7.0) u0096 XI Error
replicating product master from EBP to CCM using XI.
Re: How to load materials, contract lines & info recs directly from R/3 to CCM
Please award points if helpful..

Similar Messages

  • Transfering Products from SRM to CCM

    Dear SRM Gurus,
    I have executed the report "BBP_CCM_TRANSFER_CATALOG" in EBP. I got success messages " Catalog transferred". However in SXMB_MONI, I am getting error messages like " No implementing class registered for the interf
    (ABAP interface, request message
    CatalogUpdateNotification_Out, request message,
    namespace http://sap.com/xi/EBP)" . I don't have any idea about this error.
    Can some one guide, How can I proceed further?
    Thanks & Regards,
    Ramkumar

    Ramkumar ,
    Hi. CatalogUpdateNotification_Out is configuration on XI for the location of the XI server.
    When you run report BBP_CCM_TRANSFER_CATALOG this sends the materials to the XI server, when then sends that back to the CCM instalation (on our system this is the same client/box as the SRM application). Once there the catalog can be published through the authoring tool to the respective catalog, or a report could run to send this out.
    I would suggest looking at the config guide for CCM2 - it goes through what you need step by step.
    Regards
    Rob

  • Problem in replicating the material from SRM to CCM

    Hi SRM gurus
    We have material created in ECC6 and replicated to SRM, but the same material is not being replicated to CCM. Back ground job for program BBP_CCM_TRANSFER_CATALOG is running.
    we are on SRM 5.0, Extended calssic scenario.

    Hi
    Which CCM version are you using ? What steps are you doing ?
    CatalogUpdateNotification_Out is configuration on XI for the location of the XI server.
    When you run report BBP_CCM_TRANSFER_CATALOG this sends the materials to the XI server, when then sends that back to the CCM instalation (on our system this is the same client/box as the SRM application). Once there the catalog can be published through the authoring tool to the respective catalog, or a report could run to send this out.
    <u>I would suggest looking at the <b>config guide for CCM2</b> - it goes through what you need step by step.</u> Incase you don't have the same, i can email at your mail id, if any.
    <b>Please go through the SAP OSS Notes and links below, which will definitely help -></b>
    Note 979079 Increases waiting time during SRM catalog transfer
    Note 904757 Further performance improvement of BBP_CCM_TRANSFER_CATALOG
    Note 874874 To improve performance of "BBP_CCM_TRANSFER_CATALOG"
    Helpful links ->
    Re: Material/service master catalog upload (ECC-CCM)
    CCM SRM product catalog
    Re: How to load materials, contract lines & info recs directly from R/3 to CCM
    BBP_CCM_TRANSFER_CATALOG  (product catalog)
    Re: Product ID format settiings in R/3, EBP and CCM?
    Re: Uploading Product Data from SRM to CCM?
    Do let me know.
    Regards
    - Atul

  • Product transfer from SRM to CCM 2.0

    Hi All,
    can you advice, where can be a problem? When we run report BBP_CCM_TRANSFER_CATALOG. Catalog "SRM_EXTRACTED_CTLG" was created, but without schema and products in the catalog.
    There is no any error message in SXMB_MONI.
    EBP 5.0 and CCM 2.0 are on the same client. In XI we use scenario MasterDataInclusionInCatalogOnWAS700. Inbound message inteface is CatalogUpdateNotification_In in namespace http://sap.com/xi/CCM/CAT. The Outbound message is CatalogUpdateNotification_Out in namespace http://sap.com/xi/EBP. There is no standard mapping for this scenario, so I suppose, that the mapping is not necessary. Am I right?
    Does anybody have any idea, where the problem can be or how to find it out or test it, when there is no error message.
    Thanks for help
    Dusan

    Hi Jason,
    in message you can find payloads. Payload is with data Payload_1 without data. It depends what kind of check button was chosen, P_DEBUG or Initial transport by report BBP_CCM_TRANSFER_CATALOG.
    Thanks a lot for your help.
    Regards,
    Roman

  • Transfer master data such as contacts and products from SRM to MDM catalog

    Hi! We have a client who is not using PI as their middleware. They are using SRM 7 with SRM-MDM catalogue. My question is: do we definitely need PI in order to distribute product master and contract data to the catalogue? When programs such as BBP_CCM_TRANSFER_CATALOG and MECCM are run, is the data passed on to PI automatically? Or do they just generate an XML file in a designated location which we then use to upload to SRM-MDM Catalog? In this case, I suspect we can use other middleware to handle the upload into the catalog?
    Appreciate clarification on the above.
    Thanks!
    SF

    Hi,
    PI is required. Mapping is executed in PI.
    If you do not want to have PI, you can develop custom extractor and mapping.
    Regards,
    Masa

  • XPath error while transferring products and contracts from SRM to SRM MDM 2

    Hi experts,
    I am getting the following error in SXMB_MONI (in XI) when I transferred contracts or products from SRM to SRM MDM. I have maintained xPath entries based on the SAP delivered note but still getting this error. Please help.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Interface Determination
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="IF_DETERMINATION">CX_ID_PLSRV</SAP:Code>
      <SAP:P1>Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160).</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error when determining the inbound interface: Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160). Problem evaluating a condition: Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160). Exception CX_SWF_RLS_RULE occurred (program: CL_SWF_RLS_CONDITION==========CP, include: CL_SWF_RLS_CONDITION==========CM00Q, line: 160). Exception CX_SWF_RLS_OPERAND_MISSING occurred (program: CL_SWF_RLS_COMPARISON=========CP, include: CL_SWF_RLS_COMPARISON=========CM002, line: 63). Exception CX_SWF_RLS_OPERAND_MISSING occurred (program: SAPMSSY1, include: , line: 0). Exception CX_SWF_EXP_EVALUATE occurred (program: CL_SWF_EXP_EXPRESSION=========CP, include: CL_SWF_EXP_EXPRESSION=========CM027, line: 38). Exception CX_SWF_EXP_EXPRESSION occurred (program: CL_SWF_EXP_EXPRESSION=========CP, include: CL_SWF_EXP_EXPRESSION=========CM01Z, line: 520). Exception CX_SWF_EXP_EXPRESSION occurred (program: CL_SAI_SWF_RULE_ENGINE========CP, include: CL_SAI_SWF_RULE_ENGINE========CM00S, line: 42). Problem when processing the XPath expression /nr1:CatalogTransmission/Catalog/CatalogContent/ItemList//Item[PropertyValuationList/PropertyValuation/PropertyReference[text()</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    thanks,
    Surya

    Hi
    Are u using any FCC parameters for file adapter?
    If so don't do that. I tried with the same. You have to go with xml only. Otherwise there is some package related to that. you need to download.
    Go to this note for more details.
    SAP Note Number: 962165
    Regards,
    Pavani

  • SRM 5.0 Delete product from COMM_PRODUCT

    Hi,
    I want to delete a product from SRM that is replicated from ECC, when I run COM_PRODUCT_DELETE_SINGLE I am getting error message ' DELETION WITHOUT ARCHIVING IS NOT ALLOWED IN PRODUCTIVE ENVIRONMENT'. Can't I delete product without archiving? Can some help me out on how to archive a product in SRM (infact, I will be archiving abt 50k).
    Thanks a lot for your replies in advance.
    Regards,
    Shankar

    Archiving is a cross application process, hence the procedures remain the same except for the Object and Tables being archived across all areas.
    Please find the documentation on the same:
    http://help.sap.com/saphelp_nw70/helpdata/en/ad/b594429d7c0631e10000000a1550b0/frameset.htm
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCCA/CAARCCA.pdf
    You can follow the same procedure but for the object i mentioned in my previous reply.
    Hope this solves your problem.
    Regards
    Kathirvel

  • XI content for SRM and CCM scenario - mapping

    Hi All,
    We are using the standard business content for integrating SRM with CCM to update contract information from SRM to CCM. Both SRM and CCM are on the same system.
    The configuration scenario used is MasterDataInclusionInCatalogOnWAS700 which is in the name space SAP CATALOG CONT.MGMT. 2.0_700 , http://sap.com/xi/CCM/CAT.
    There are 2 interfaces being referred by this scenario: CatalogUpdateNotification_Out and this CatalogUpdateNotification_In and both the interfaces are pointing to the same meesage type CatalogTransmission but they are in different name spaces.
    Once the scenario was configured there was no interface mapping available in the standard business content to map the above 2 interfaces.
    SAP SRM SERVER 5.5
    CatalogUpdateNotification_Out
    CatalogTransmission
    http://sap.com/xi/EBP
    SAP CATALOG CONT.MGMT. 2.0_700 ,
    CatalogUpdateNotification_In
    CatalogTransmission
    http://sap.com/xi/CCM/CAT
    Is this the normal case and we need to develop our own mapping or is the standard content not imported correctly?
    The service pack details are as follows:
    PI 7.0 SP level 14
    XI content
    u2022 SAP BASIS 7.00 - SP 14
    u2022 SAP CATALOG CONT.MGMT. 2.0_700 - SP 12
    u2022 SAP SRM SERVER 5.5 - SP 11
    u2022 SAP ABA 7.00 - SP 14
    Thanks,
    Shravan

    ditto, anybody received a response from SAP with regards to this problem?
    As suggested above, we could build our own mapping in XI but this would obviously be a modification to SAP standard which we would prefer to avoid.
    Regards, Kyle.
    OK Received a response from SAP dated Oct. 9, 2008
    I assume that you have installed NW 7.00 SP14 (or higher).
    Within earlier versions the mapping from XML to ABAP was to lax.
    The XML message was processed witout regarding the name of the root
    element. This was fixed with SP14.
    When you call an interface the XML message must match with the type
    defined in the WSDL used for proxy generation.
    Either the message or the WSDL used to generate the proxy seems to be
    wrong here.
    Here is a work around should solve this problem until we make available in a standard note soon.
    I will do it internally to our development team but I am sorry that i can not tell now when the note will be ready.
    Disable the new check by adding the following entry in transaction sproxset
    -Name: ST_USE_LAX_ON
    -Value: X
    -User: <empty>
    -Inactive: <empty>
    Edited by: Kyle Freeman on Oct 9, 2008 5:54 PM

  • Transfer of Product Master and Contract data from SRM server to CAT

    Hi,
    We are using XI system to send product master data from SRM system to CAT (catalogue authorising tool) wherein both the SRM and the CAT add-on have been installed on the same web application server.
    On the SRM-> XI part, we are going to use ABAP client proxy. My question is can we use ABAP server proxy to send data from XI to CAT ? In other words, is CAT a part of ABAP system so that we can use proxy ?? 
    I am new to SAP environment and hence this question.
    Regards
    Ramesh

    Hello Ramesh,
           for uploading SRM master data to CCM u need not do any developements in ABAP , u have to just import SAP predefined SWCV's in Integration repository and configure required scenario "MasterDataInclusionInCatalogOnWAS" for u r corresponding WAS version.
          U can download configuration document from service marketplace named " Configuration Fact Book CCM 2.0 "
    Regards,
    Keith

  • Transferring Product Data from SRM 7.0 to SRM-MDM 3.0

    Dear SRM-MDM experts,
    We are running the program BBP_CCM_TRANSFER_CATALOG to transfer product data from SRM 7 to SRM-MDM 3.0  The question we have is after running the program, where do we find the file the XML file which the program has generated so we can see the results?  SLG1 just shows how many products were processed.  We need to see the list of the products generated.
    Thanks and regards
    Pedzi

    Hi Pedzi,
    You can find the generated XML file in MDM server. Here is the path to get the Product Data XML file.
    C:/usr/sap/SRD\MDS00/mdm/distributions/MDD_ORCL/REPOSITORYNAME/Inbound/SRM/_MDMProductDataTransmission/Archive
    Thanks,
    Anshuk Saxena

  • Product Contract and supplier data transfer from SRM to SAP XI

    Dear MDM Guru's
    I want to transfer product data from SRM system to SRM MDM catalog by executing the transaction BBP_CCM_TRANSFER. But not found any materials  or blog or articles on configuration and integration steps between SAP SRM and SAP XI.
    Need a same information on SRMMDM_CTR_TRANSFER - For contract data, Suppliers data.
    Please help.
    Regards
    Jacob

    HI Jacob,
    I believe below documents will give you the information which you are looking.
    [SRM-MDM Catalog Setup - Ready Reference|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/806f3d56-0d29-2d10-9abf-c0df6f0fdfe8]
    [SAP NetWeaver Master Data Management - SRM Catalog: Configuration for SAP NetWeaver Exchange Infrastructure - Ready Reference|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/601d4fee-719f-2910-4f86-fa030ab07358]
    [SAP NetWeaver Master Data Management - SRM Catalog: SRM - EBP Configuration|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10d1bde2-699f-2910-8e86-f46bfe045fdc]
    Please revert if you still get any question, after going though these documents..
    - Shiv

  • Replicating Products/Catalog from SRM to MDM

    I am implimenting SRM and MDM on 7.1 and SRM-MDM Catalog 3.0
    I wanted to replicate catalog data from SRM. As we know each catalog record in MDM contains Product, Supplier, Info record data. I am not sure if we have to map all these in MDM or It will be mapped by SAP delivered content for replication.
    I am using BBP_CCM_TRANSFER transaction in SRM to transfer data to MDM. In the selection screen I am using 'Category Hierarchy', Category ID and Language fields. I did unchek/check Force Intial Transport and P_debug. There was not much difference.
    However I am getting following info messages, but unable to see any data in MDM
    16.06.2010 09:27:41: Initial transfer for catalog SRM_EXTRACTED_CTLG
    16.06.2010 09:27:42: Determine category TELEPHONE (5 products)
    16.06.2010 09:27:42: Start of catalog transfer for 1
    16.06.2010 09:27:42: catalog transfer ended
    I am now stuck here. Can any one share details of the replication process and steps involved.

    Hi Sudha,
    Please explain your business scenario. What data you want to replicate from SRM to MDM. We can replicate Suppliers, Contracts and Product Master from SRM to MDM through XI. Make sure you hae configured XI settings for that. You have to download the pre-delivered XI content from SAP Markeplace. Please check Note # 1177779 & 1177780 regarding that.
    We can use following reports in SRM to replicate following data in MDM
    BBP_CCM_Transfer_Catalog-----Product master
    ROS_SUPPLIER_SEND_TO_CATALOG-----Supplier data
    SRMMDM_CTR_Transfer----Contract data from SRM
    In your case, you are running BBP_CCM_TRANSFER. Please check the SXMB_MONI t-code to monitor the XML messages whether XML files are processing correctly or getting stuck.
    Thanks,
    Anshuk Saxena

  • How do we replicate product categories from SRM/ECC in to SUS system

    How do we replicate product categories from SRM/ECC in to SUS system  in srm 7.0

    Hi Gopal,
    Are you confused between SUS & ROS? If you meant ROS, it is advised to create local product categories in ROS under COMM_HIERARCHY.
    Let us know your exact requirements.
    Regards,
    Nikhil

  • Issue with Contract Replication from SRM to MDM  - XML structure

    Hi
    We are having an issue with trnsfering a contract to MDM. We have released the contract for update to MDM in the contract through the distribute to catalog option. An XML is generated in SRM that gets sucessfully passed to PI through Catalogupdatenotification_out. In PI the XML fails in the Interface Determination step. the issue that has been noticed is that the XML that is generated in SRM does not contain product category or product ID which is basically what the condition mapping in PI checks for. The conditions in PI were setup as per SAP.
    But now the XML fails in PI because it does not find a combination for Catalog type code = 03 and product category. Please find the XML structure in SRM and you will see that it does not have a product category even though the contract has one.
    <?xml version="1.0" encoding="utf-8" ?>
    - <n0:CatalogTransmission xmlns:n0="http://sap.com/xi/EBP" xmlns:prx="urn:sap.com:proxy:SS1:/1SAI/TASDE808778FFEB81012891:701:2010/10/07">
    - <StandardBusinessDocumentHeader>
      <ID schemeID="0080">56000004100000000220110616202243</ID>
      <CreationDateTime>2011-06-16T20:22:43Z</CreationDateTime>
    - <SenderParty>
      <InternalID schemeID="PartyID" schemeAgencyID="SS1CLNT100">143</InternalID>
      </SenderParty>
      </StandardBusinessDocumentHeader>
    - <Catalog>
      <ID>5600000410</ID>
      <CatalogTypeCode>03</CatalogTypeCode>
    - <NameList>
      <Name>(Copy of Contract 5600000395)</Name>
      </NameList>
      <ActionCode>04</ActionCode>
      <CompleteTransmissionIndicator>true</CompleteTransmissionIndicator>
    - <ValidityDateTimePeriod>
      <StartDateTime>2011-06-13T12:00:00Z</StartDateTime>
      <EndDateTime>2012-06-12T12:00:00Z</EndDateTime>
      </ValidityDateTimePeriod>
    - <CatalogContent>
    - <ItemList>
    - <Item>
      <ID>1</ID>
      <ActionCode>04</ActionCode>
      <CompleteTransmissionIndicator>false</CompleteTransmissionIndicator>
    - <PropertyValuationList>
    - <PropertyValuation>
      <PropertyReference>/CCM/PRICE</PropertyReference>
    - <PropertyValues>
    - <MultipleValue>
      <Index>1</Index>
    - <SimpleValue>
      <AmountSpecification currencyCode="USD">1.0</AmountSpecification>
      </SimpleValue>
      </MultipleValue>
      </PropertyValues>
      </PropertyValuation>
    - <PropertyValuation>
      <PropertyReference>/CCM/PRICE_BASIS_QUANTITY</PropertyReference>
    - <PropertyValues>
    - <SimpleValue>
      <QuantitySpecification unitCode="EA">1.0</QuantitySpecification>
      </SimpleValue>
      </PropertyValues>
      </PropertyValuation>
    - <PropertyValuation>
      <PropertyReference>CCM/PMNTTRMS</PropertyReference>
    - <PropertyValues>
    - <SimpleValue>
      <NameSpecification>0002</NameSpecification>
      </SimpleValue>
      </PropertyValues>
      </PropertyValuation>
      </PropertyValuationList>
      </Item>
    - <Item>
      <ID>2</ID>
      <ActionCode>04</ActionCode>
      <CompleteTransmissionIndicator>false</CompleteTransmissionIndicator>
    - <PropertyValuationList>
    - <PropertyValuation>
      <PropertyReference>/CCM/PRICE</PropertyReference>
    - <PropertyValues>
    - <MultipleValue>
      <Index>1</Index>
    - <SimpleValue>
      <AmountSpecification currencyCode="USD">12.0</AmountSpecification>
      </SimpleValue>
      </MultipleValue>
      </PropertyValues>
      </PropertyValuation>
    - <PropertyValuation>
      <PropertyReference>/CCM/PRICE_BASIS_QUANTITY</PropertyReference>
    - <PropertyValues>
    - <SimpleValue>
      <QuantitySpecification unitCode="EA">1.0</QuantitySpecification>
      </SimpleValue>
      </PropertyValues>
      </PropertyValuation>
    - <PropertyValuation>
      <PropertyReference>CCM/PMNTTRMS</PropertyReference>
    - <PropertyValues>
    - <SimpleValue>
      <NameSpecification>0002</NameSpecification>
      </SimpleValue>
      </PropertyValues>
      </PropertyValuation>
      </PropertyValuationList>
      </Item>
      </ItemList>
      </CatalogContent>
      </Catalog>
      </n0:CatalogTransmission>
    Edited by: vishakhrajeev123 on Jun 20, 2011 6:49 PM

    Dear Krupa,
    Thank you for your quick reply.
    So we should consider the scenario where SRM is the central repository for the contracts, and all the changes done in SRM should be replicated to ERP.
    In this scenario, do you know which steps should be done to allow contract replication from SRM to ERP? I already created a central contract in SRM but there is no message sent to PI.
    Thanks in advance.
    Regards,
    Andreia

  • How to extract data from SRM to BW?

    am a sap bw person. am given few fields...in SRM--CCM-Shopping...like service,product and material. they asked me to extract that data into BW.how to see those fields in SRM and how to check whether they are ready for extraction into BW...can u tell me step by step?

    Hi,
    Take a look at the thread [here|Procedure for standard data source extraction from SRM to BW 3.5.;, please always perform some searching in SDN before opening a thread as the question may already have been posed before.
    Regards,
    Jason

Maybe you are looking for