Products that necessary for construction a system with offline clients.

Hi all. Please help me..
I would like to construct the system, where there is one central DB and many clients, but clients should work with there's local DB when connection is fault.
So I have understood that I should by Oracle Client(s) and Oracle Server. And then should I by Oracle lite and Oracle Standard Edition too?
Thanks a lot
Gabby

You need Oracle Enterprise DB and Oracle Mobile Server. Mobile Server will handle the deployment and distribution of the Oracle Lite clients.

Similar Messages

Products that necessary for construction a system with offline cli

Hi all. Please help me.
I would like to construct the system, where there is one central DB and many clients, but clients should work with there's local DB when connection is fault.
So I have understood that I should by Oracle Client(s) and Oracle Server. And then should I by Oracle lite and Oracle Standard Edition too?
Thanks a lot
Gabby

A Standby database system consists of one Primary database (which is used to do work on) and at least one Standby database, which is, typically, a Physical Standby. That means that it can't be used for "normal" work, but, instead, is set-up to receive all of the changes made to the Primary database, on an ongoing basis. Thus, if the Primary database is destroyed, then the Standby is converted to become a new Primary database, allowing work to continue, with (depending on how it's set-up), zero/mimimal data loss.
It's a big topic, and you really must read the Oracle documentation. Or get someone to come in and explain it all to you. That's the only way you'll be able to decide what you actually require... and possibly save you money.

After migration from sccm 2007, there are many systems with no client installed

Hi Everyone,
We have migrated our environment from SCCM 2007 to SCCM 2012 , And Manual client push installation has been done by HeadQuarter SCCM admins on site code of our region.
But as i see , in all systems collection based on OU, there are approx 50% systems with no client installed.
There may be some stale systems in AD.
Is there any way so that i can list out all Stale or old computers which are not in use anymore records of systems from Active directory and so that i move them to OU for which system discovery is not enabled.
Also, it will very useful if i get more information on lastLogonTimeStamp and such more properties which specifies system as stale or OFF the network for some period..

You could also remove the objects without a client and adjust the settings in the
Options tab of the Active Directory System Discovery Properties. By tweaking those options you can make sure that you're not discovering those old objects in the first place.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

How to setup EWA for non-ABAP system with SM 4.0 ?

Hi, we are running SM 4.0 with the support-stack 06. I have set-up a solution for monitoring which includes a NW04 WebAS 6.40 Java only system. Has anyone set-up EWA reports for this type of non_ABAP system who can advise of the steps necessary for this ?
It seems like you need to define RFC destinations for where the monitored system data should be collected from , but there doesn't appear to be anywhere to do this for non-ABAP systems ?
I have looked at Note 738676 - Service Data Download for Non-ABAP Components but it hasn't helped and it seems to be SDCC specific, rather than SDCCN.
Thanks.

Hi Andrew,
we are just developing it, at the moment you have the following option, your java system has to send by ccms agends its data to an ABAP 640 system or higher, there you can see its alerts in ccms, then you have to make both system available in SMSY. Then important you have to assign the java system as a system component, then we collect also the java data and shows them in the EWA of the ABAP system. There for go to the main instance tab and set a java main instance to relevant and assign your java system.
This is the old, available standard solution. At the moment we develop it also for java stand alone.
I think it will be available with the new ST-SER in autumn
Regards,
uDo

BI system with additional client for non-BI application

We have a test SRM system with the BI_CONT add-in loaded. Our intent was to use one client for BI and another client for SRM unit testing. It is feasible to run BW in the same physical instance as SRM, given that they are both built on NW 70, and we loaded the BI_CONT.
In the BW client (100) I try to create a source system for the SRM app (client 400). After I enter the RFC destination (SRMCLNT400) and necesasry credentials, the system tries to sign me back into client 100. Then it gives error "SRDCLNT100 already exists". That source does exist because it is the BI souce, and I never specified SRDCLNT100. I used the RFC destination created for SRDCLNT400. Why might this be happening because to the BI client (100), it shouldn't be able to distinguish between a source system that's on the same physical instance (different client) versus a differnet instance/host.

Hi
Somehow yes, but as I said:
I faced the problem with "The logical system name has changed" (exit only). I tried to solve it by running BDLS but it did not solve the problem.
This is why I asked about the proper approach. Your proposal is a little bit different to my last try, because you suggest to copy 800 to the new client. I have used 000 as a source for copy.
My main concern is what with some functionalities in client 800 if I move BI to the new client (this means RSA1 will not work in 800).
See here (though this is for solution manager): Re: BW / SolMan Logical System Change
This is why I considered using the same client for ERP and BI (only 800), but here I am not sure if there are some disadvantages (but compared to having Bi on different client, so database size is not an issue).
Do you know what will be wrong to use only client 800 and only add BI CONT to the system ? Do you know any SAP notes which says that this is wrong?
regards
Rafal

Does child systems with 3 clients need 3 RFCs?

Hello
One quick question
Does child system that has 3 clients need 3 RFC conenctions to connect to CUA?
We have ECC with 3 clients. When I go in one client SM59 and create RFC connection to CUA, everything is good.
When I go in SM59 of other client and I create RFC(same as logical name of CUA) , it says it already exist since I created in my previous client
Any thoughts? I know from CUA I would need 3 RFCs for the 3 clients but from the child do I need 3 RFCs? If yes, its not allowing.

Yes, normally the logical system name is used and having this the same as the RFC destination helps.
But this does name a type of "name space" implication...
Perhaps you want to consider where you have your master system and use client side security (the authorization group concept for S_RFC_ADM, and S_ICF type DEST to call them?
Even if you restrict RFC, it will always need to do that which is is designed to do. Client side security makes sense in cases such as CUA.
Cheers,
Julius

Drop insert in receiver system with multiple clients

Hello,
does TDMS handle drop-insert technology in a multiple client receiver system automatically?
What can be the impact for the other clients when they are working while data deletion in the
receiver client?
Regards Karlheinz

Hello Karlheinz,
Good, question is straight and clear now.
please refer to steps mentioned in oss note 1433553 to make sure that TDMS should not consider drop_insert in TDMS migration.
Regards,
Amit Sharma
Solution
You have the possibility to set a Global Parameter for setting the deletion
scenario to overall array delete. In the following a description of the
proceeding.
Check if the global parameter GLOBAL_NO_DROP_INSERT exists
and that it is set to 'X' in the receiver system.
Call the Migration Server Overview(tcode cnv_mbt_tdms).
Expand the tree until you get your package.
Mark the package number so that it is highlighted.
In the menu click on Goto->Global Parameter.
When you have correctly positioned your cursor on a package number you
will see in the application toolbar buttons named with the exection targets,
system name and client number. You can also see if a connection to the listed
system is working (checkmark) or not (lightning).
Click on the button
'RECEIVER' to get the global parameters from the receiver system. This is where
the Global Parameter has to be set.
The global parameter entries will be
delivered empty and for the parameter you want to use you have to set the value.
An initial global parameter has no value in the column 'Client'.
Mark the row with the global parameter
'GLOBAL_NO_DROP_INSERT'.
Press button copy text (third button).
In the menu bar click on the drop-down box of the insert button and choose
the item 'Insert in new row' in the selection list (forth button from
left).
In column 'Client' enter the client where you want to use the overall
scenario array-delete. If you enter the value 'ALL' then the setting is valid
for all clients in the system.
In the column 'Parameter Value (from)' enter the value 'X'.
Save your settings.
If the parameter already exist you have to check whether the correct
client is set. If the column 'Client' includes the deletion client or the value
'ALL' then no further settings are required. Otherwise you have to copy the
Global Parameter as previously described and change the value in the column
'Client' with your deletion client. Take care that the value in column
'Parameter Value (from)' is 'X'.
From now on the generation of deletion
programs will use this information to create the deletion programs with deletion
scenario ARRAY-DELETE.

I just purchased an IMac with lion and I tryed to install an old math program that is for winmac running systems. When I try to boot the cd it comes up with a notepad window with a bunch of weird symbols and codes but the program will not start up.

I just purchase my first IMac with lion and I was trying to install a math program I bought 6 years ago. When I went to boot it off the disk while following the program instructions a window popped up with a note pad format with symbols and codes but the program would not download or open. How do I get this program to work? It is a mac compatible program by the way.

Your Mac probably does not know with which application to open the file and is opening a file with a text editor that really needs to be opened by the application itself. Try starting the application first, then use the File > open command to open the file.
As varjak paw comments, there isn't a "winmac" so that's not telling us anything.
Note that it is possible that software purchased 6 years ago may no longer run on your computer. Once we know what it is we can help more.

Users for a diskless system with NFSv4

I'm trying to set up the root filesystem for a diskless Arch client on an NFSv4 share. It just dawned on me that, based on my understanding of user mapping for NFSv4 (user mapping by name rather than numeric UID), any user that owns files on the client system will need to exist or be explicitly mapped to a user on the file server, otherwise the files will end up owned by nobody.
Is that accurate? How do other people handle diskless sytems with NFSv4? I'd rather not have to set up NIS or Kerberos, if it can be avoided. The file server in my case is a FreeBSD box so the systemd and daemon users won't necessarily match up.
Does anyone have experience with this?

ambsace wrote:In real life, though, my diskless system has (or will have) a root filesystem, on a disk array in a different system.
So, what I'm missing here? A diskless system will boot from network and maps the root filesystem via nfs. This is comparable to a local installation, where is a second system involved here?
Ok, got it. You mean the user mappings between the root filesystem of the diskless system and the fileserver itself. Because you talked from a "client", I thought you are talking about the mapping from a "client" machine to the nfs structure. Sorry for the noise.
Edit: Typos and more...
Last edited by Tarqi (2015-05-06 03:45:08)

A fix that works for your battery drain with iOS 8.2

After I updated my iPhone 4s to the new iOS 8.2 I found my battery life had become terrible. I could barely make it through an 8 hour day at work before my phone would die. It was so bad that I had to get myself a second charger to plug it in during the day. Even then, if I used the phone at all, it would still lose its charge while plugged in.
Before this update, my phone would easily last through the day and would not need to be plugged in before I went to bed. Even at midnight when I'd go to rest for the night, my phone was never below 70% and most times it would still be well above 80% but not so with iOS 8.2 So here is a fix I found on another forum somewhere. I was desperate so I tried it and low and behold, it worked great.
Here goes:
Let your phone die completely until it turns off by itself
Plug it in your charger until it comes back on again (around 6% for mine)
Turn it back off using the top button and the slider on the phone
Leave it plugged in for 2 to 3 hours or until you figure it would have reached 100%
Unplug the phone and turn it on
Now reboot your device (turn it off and back on again)
That's it. This fixed it for me and for many on the forum where this was posted. My battery life is back to what it was before my update to iOS 8.2. I have plenty of battery life left when I get home after work.
Try it and pass it on....it works.

Use the Settings app to determine what apps or processes are using your battery the most. Once you know what is causing the battery drain you can take steps to reduce it.
Settings > General > Usage > Battery Usage
Wait a few seconds for the device to bring up the list of apps with their battery usage.

Is there a Metro version of Firefox that works for Non-Touch computers with Windows 8.1?

I have a 64-bit Windows 8.1 computer of which doesn't support Touch features. Is there a Metro version of Firefox that works on 64-bit Windows 8.1 computers that don't support touch? If so, how can I get it?

Okay, thanks. Tbh the only advantage I thought of was the ability for it to open in a Windows 8 mode. Basically like how IE 10 does when opened from the start menu.

No maintenance cycle is open for the current system

Hello!
I have problems to use CharM functionality due to following error:
<b>No maintenance cycle is open for the current system</b>
The error arises when I try to set a urgent correction in status "In Development" I get the following error, menwhile I have an valid maintenance cycle active.
I use CharM functionality for the solution consisting of an single system with two clients:
SRM:000 (as DEV-system) (system role: source system)
SRM:100 (as PRD-system) (system role: target system)
- No maintenance cycle is open for the current system (meanwhile I have a valid maintenance cycle created and activated).
Futhermore I get the additional warning:
IBase component is not a productive system in system lanscape
Can some help me with this issue?
Thank you very much!
regards
Thom

Hello Kriti,
thank you very much for your response.
Unfortunately I also thought about it.
Basically my CharM procedure looks as follows.
I send the message from productive client (I have only one system with client 000 and 100) to Service Desk in SOLMAN.
There I can see the IBase of the productive client.
Then I create a urgent correction by assigning IBase to this IBase of productive client. It is also possible to change the IBase in change mode, so I have tried all the possible values of IBase and get the same error.
My problem also is that I have multiple values of IBase assigmenets, it means one system has multiple assigments to IBase components.
I do not know how to delete/cut these settings....
Thank you for your further help!
regards
Thom

One PI for multiple ECC systems

Hi PI experts,
We have one PI instance per environment, but multiple ECC instances, so taking Dev we currently have a BAU ECC and a project ECC, although there are occasionally conflicting needs this is generally manageable. However a new project has introduced the need for two further ECC instances per environment, all requiring the same interfaces. We will still only have one PI. All of the interfaces receive files coming into the same folder structure.
Has anyone else experienced this scenario? How was it best to manage the competing projects trying to use one PI instance?
Thanks very much in advance
R_Macd

Hi R_Macd,
You need to register the ABAP Systems in SLD, use the transaction RZ70 to do this, please check the refer links:
http://help.sap.com/saphelp_nwpi71/helpdata/en/7c/1966ab384d42a78deaebc74d33c032/frameset.htm
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=213353417
After that, create the business systems with the client do you need to connect.
http://help.sap.com/saphelp_nwpi71/helpdata/en/ae/e3bd4f6b61e146ad1384954ecabb41/frameset.htm
Best Regards,
.Luis Bernal.

Trouble in a SAP system with load balancing

Hello masters:
I had a trouble with workitems that came from a SAP system with load balancing. They doesn't receive the workitem ID in the UWL.
I created another system in the portal as a "dedicated application server", and made the necessary configuration in order to replace the first one, and then my workitems worked fine.
However, I would like to know what appened with the first system created as "system with load balancing". Why this system didn´t pass the workitem ID to the application (web dynpro abap) that execute the workitems?
Thank you.

I hope there was some missing configuration in the first case which was not replicating the workitem from SAP Inbox to UWL.
Thanks
Arghadip

SAP PI Modeling: Two Business systems with party

I am triing to create SAP BPVT Interaction model that describe connection of 2 process components. Each of that components must be business systems with party. As I understand process component must be Process component at business partner for assigning business system with party.
If I create SAP BPVT Interaction model with two Process component at business partner, I get they connection in type of "Other Interaction". When I try create new assigment, I get error "Unable to assign the model to this connection type due to the method or profile in use".
How can I create correct connection?

Hi Eugenia,
Please see note 1084315 which descriibes the the multiple backend scenario.
This should be relevant here.
Best regards
Christophe

Products that necessary for construction a system with offline clients.

Similar Messages

Maybe you are looking for