Profibus card program has 429 ActiveX component can not create object
I have a Profibus card (DF_PROFI_II DP). It was working fine on an old PC. Our IT department need to upgrade PC to a new one, and now I can not get it to work on the new PC.
Both PCs run windows XP. I tried driver for original CD which is 1.32.1 and I tried a downloaded driver 1.35.0. In both cases, windows can recognize the hardware. However when I tried to run Configurator II, the program always shows a message like below:
Anybody can help?
Thanks,
Attachments:
error.JPG 14 KB
If the error happens as soon as you start the configurator I would think there is a conflict between different versions of the configurator.
Could you go ahead and remove the board from your PC, uninstall all Comsoft components from your machine. Sometimes that might be not only the driver but also the configurator.
Then go ahead and delete the Comsoft folder, reboot and install the 1.36.2 driver.
Then install the detect the board again and try the configurator.
DirkW
Similar Messages
-
SBO2004A: Runtime Error 429 ActiveX Component can't Create Object
Hello,
We have an Addon developed with VB6 that run without problems with SBO 6.5.
We have upgraded to SBO2004A and I have referenced in the source code to the 2004 UI and DI. I debug mode (from IDE) we don't have problems, but when I try to execute the addon from a client, I get this error message:
<b>Runtime Error 429 ActiveX Component can't Create Object</b>
Thanks in advance
BlasI'm using Installshield 10.5 to generate the setup file. It's much more easy and not requiered to install Framework 1.1 in each PC client before to install the Addon.
You have to create and msi project, and write the Installscript to retrieve the install directory from parameter string passed by SAP.
After install you must execute the AddOnInstallAPI.EndInstall to notify SAP:
#include "ifx.h"
prototype LONG AddOnInstallAPI.EndInstall();
prototype LONG AddOnInstallAPI.RestartNeeded();
// OnFirstUIBefore
// First Install UI Sequence - Before Move Data
// The OnFirstUIBefore event is called by OnShowUI when the setup is
// running in first install mode. By default this event displays UI allowing
// the end user to specify installation parameters.
// Note: This event will not be called automatically in a
// program...endprogram style setup.
function OnFirstUIBefore()
number nResult, nLevel, nSize, nSetupType;
string szTitle, szMsg, szOpt1, szOpt2, szLicenseFile;
string szName, szCompany, szTargetPath, szDir, szFeatures, szTargetdir;
BOOL bLicenseAccepted;
LIST listID;
begin
nSetupType = COMPLETE;
szDir = TARGETDIR;
szName = "";
szCompany = "";
bLicenseAccepted = FALSE;
// Beginning of UI Sequence
Dlg_Start:
nResult = 0;
Dlg_SdWelcome:
szTitle = "";
szMsg = "";
//{{IS_SCRIPT_TAG(Dlg_SdWelcome)
nResult = SdWelcome( szTitle, szMsg );
//}}IS_SCRIPT_TAG(Dlg_SdWelcome)
if (nResult = BACK) goto Dlg_Start;
Dlg_SdLicense2:
szTitle = "";
szOpt1 = "";
szOpt2 = "";
//{{IS_SCRIPT_TAG(License_File_Path)
szLicenseFile = SUPPORTDIR ^ "License.rtf";
//}}IS_SCRIPT_TAG(License_File_Path)
//{{IS_SCRIPT_TAG(Dlg_SdLicense2)
// nResult = SdLicense2Rtf( szTitle, szOpt1, szOpt2, szLicenseFile, bLicenseAccepted );
//}}IS_SCRIPT_TAG(Dlg_SdLicense2)
if (nResult = BACK) then
goto Dlg_SdWelcome;
else
bLicenseAccepted = TRUE;
endif;
Dlg_SdRegisterUser:
szMsg = "";
szTitle = "";
//{{IS_SCRIPT_TAG(Dlg_SdRegisterUser)
// nResult = SdRegisterUser( szTitle, szMsg, szName, szCompany );
//}}IS_SCRIPT_TAG(Dlg_SdRegisterUser)
if (nResult = BACK) goto Dlg_SdLicense2;
Dlg_SetupType2:
szTitle = "";
szMsg = "";
//{{IS_SCRIPT_TAG(Dlg_SetupType2)
// nResult = SetupType2( szTitle, szMsg, "", nSetupType, 0 );
//}}IS_SCRIPT_TAG(Dlg_SetupType2)
if (nResult = BACK) then
goto Dlg_SdRegisterUser;
else
nSetupType = nResult;
if (nSetupType != CUSTOM) then
szTargetPath = TARGETDIR;
nSize = 0;
endif;
endif;
Dlg_SdAskDestPath2:
if ((nResult = BACK) && (nSetupType != CUSTOM)) goto Dlg_SetupType2;
szTitle = "";
szMsg = "";
if (nSetupType = CUSTOM) then
//{{IS_SCRIPT_TAG(Dlg_SdAskDestPath2)
// nResult = SdAskDestPath2( szTitle, szMsg, szDir );
//}}IS_SCRIPT_TAG(Dlg_SdAskDestPath2)
TARGETDIR = szDir;
endif;
if (nResult = BACK) goto Dlg_SetupType2;
Dlg_SdFeatureTree:
if ((nResult = BACK) && (nSetupType != CUSTOM)) goto Dlg_SdAskDestPath2;
szTitle = "";
szMsg = "";
szTargetdir = TARGETDIR;
szFeatures = "";
nLevel = 2;
if (nSetupType = CUSTOM) then
//{{IS_SCRIPT_TAG(Dlg_SdFeatureTree)
// nResult = SdFeatureTree( szTitle, szMsg, szTargetdir, szFeatures, nLevel );
//}}IS_SCRIPT_TAG(Dlg_SdFeatureTree)
if (nResult = BACK) goto Dlg_SdAskDestPath2;
endif;
Dlg_SQLServer:
nResult = OnSQLServerInitialize( nResult );
if( nResult = BACK ) goto Dlg_SdFeatureTree;
Dlg_ObjDialogs:
nResult = ShowObjWizardPages( nResult );
if (nResult = BACK) goto Dlg_SQLServer;
Dlg_SdStartCopy2:
szTitle = "";
szMsg = "";
//{{IS_SCRIPT_TAG(Dlg_SdStartCopy2)
nResult = SdStartCopy2( szTitle, szMsg );
//}}IS_SCRIPT_TAG(Dlg_SdStartCopy2)
if (nResult = BACK) goto Dlg_ObjDialogs;
return 0;
end;
// OnSetTARGETDIR
// OnSetTARGETDIR is called directly by the framework to initialize
// TARGETDIR to it's default value.
// Note: This event is called for all setups.
function OnSetTARGETDIR()
number nId, nIgnore, nResult;
string szId, szTARGETDIR;
string wCMDLINE;
LIST listID;
begin
// In maintenance mode the value of TARGETDIR is read from the log file.
if( MAINTENANCE ) then
return ISERR_SUCCESS;
endif;
// Set TARGETDIR to script default.
TARGETDIR = "<FOLDER_APPLICATIONS>
<IFX_COMPANY_NAME>
<IFX_PRODUCT_NAME>";
if (CMDLINE != "") then
wCMDLINE = CMDLINE;
StrReplace (wCMDLINE, '"', '', 0);
listID = ListCreate (STRINGLIST);
if (StrGetTokens (listID, wCMDLINE, "|") > 0) then
MessageBox ("Parametros incorrectos.", SEVERE);
else
ListGetFirstString (listID, TARGETDIR);
//MessageBox (TARGETDIR, INFORMATION);
endif;
ListDestroy (listID);
return 0;
endif;
// Read TARGETDIR from the media.
nResult = MediaGetData( MEDIA, MEDIA_FIELD_TARGETDIR, nIgnore, szTARGETDIR );
// Use the TARGETDIR from the media if anything was read.
if( nResult >= ISERR_SUCCESS && StrLengthChars( szTARGETDIR ) ) then
TARGETDIR = szTARGETDIR;
endif;
// Customize the default TARGETDIR for multi-instance application.
// TODO: If you want something different customize the code below.
if( MAINT_OPTION = MAINT_OPTION_MULTI_INSTANCE && MULTI_INSTANCE_COUNT > 0) then
// Start with the current multi-instance count plus one.
nId = MULTI_INSTANCE_COUNT + 1;
// Find a unique TARGETDIR.
while( ExistsDir( TARGETDIR ) = EXISTS )
// Convert to string.
NumToStr( szId, nId );
// Update IFX_MULTI_INSTANCE_SUFFIX
IFX_MULTI_INSTANCE_SUFFIX = "_" + szId;
// Update TARGETDIR
TARGETDIR = TARGETDIR + IFX_MULTI_INSTANCE_SUFFIX;
// Update nId
nId = nId + 1;
endwhile;
endif;
end;
// OnEnd
// The OnEnd event is called at the end of the setup. This event is not
// called if the setup is aborted.
function OnEnd()
string wCMDLINE;
LIST listID;
STRING DLL_FILE;
INT nValue;
LONG nRC;
NUMBER nResult;
begin
if (CMDLINE != "") then
wCMDLINE = CMDLINE;
StrReplace (wCMDLINE, '"', '', 0);
listID = ListCreate (STRINGLIST);
if (StrGetTokens (listID, wCMDLINE, "|") > 0) then
MessageBox ("Parametros incorrectos.", SEVERE);
else
ListGetFirstString (listID, DLL_FILE);
ListGetNextString (listID, DLL_FILE);
// MessageBox (DLL_FILE, INFORMATION);
endif;
ListDestroy (listID);
nResult = UseDLL (DLL_FILE);
if (nResult != 0) then
MessageBox ("No se ha podido cargar\nAddOnInstallAPI.dll", SEVERE);
abort;
endif;
if AddOnInstallAPI.EndInstall() > 0 then
MessageBox ("Error al ejecutar AddOnInstallAPI", SEVERE);
abort;
endif;
endif;
end; -
Run-time error '429': ActiveX component can't create object
HI,
I am having the following error in my Excel VBA Run-time error '429': ActiveX component can't create object when running the following code:
Dim objDistiller As New ACRODISTXLib.PdfDistiller6
objDistiller.FileToPDF2 filePath & ".PS", filePath & ".PDF", "T:\Templates\PDFSettings\Standard.joboptions", 1
This code has been working for years on all our systems, but due to recent security issues our administrator changed all user accounts to not have local administrator rights and now when we run this code we get the above error message.
I have had a look at DComcnfg.exe to try and get it to work by setting the default property permissions to allow access by Everyone but I am still getting the error.
Any help would be greatly appreciated.
Regards.
Shane Chapman.Hi Shane,
Here is another way to create PDF with Macro using another API than Distiller. This API is faster too.
Probably this post is not of interest anymore but here is how I have done it:
1. Download PDFCreator: http://sourceforge.net/projects/pdfcreator/
2. Use the following Macro:
Option Explicit
Sub printPDFmacro()
'Author : Ken Puls (www.excelguru.ca)
'Macro Purpose: Print to PDF file using PDFCreator
' (Download from http://sourceforge.net/projects/pdfcreator/)
' Designed for early bind, set reference to PDFCreator
Dim pdfjob As PDFCreator.clsPDFCreator
Dim sPDFName As String
Dim sPDFPath As String
'/// Change the output file name here! ///
sPDFName = "Facture-" & nclient2 & " le " & Format(Date, "yyyy-mm-dd") & ".pdf"
sPDFPath = "E:\Partenaire Scolaire\Comptabilite\Factures"
PDFFileName2 = sPDFPath & "\" & sPDFName
Set pdfjob = New PDFCreator.clsPDFCreator
With pdfjob
If .cStart("/NoProcessingAtStartup") = False Then
MsgBox "Can't initialize PDFCreator.", vbCritical + _
vbOKOnly, "PrtPDFCreator"
Exit Sub
End If
.cOption("UseAutosave") = 1
.cOption("UseAutosaveDirectory") = 1
.cOption("AutosaveDirectory") = sPDFPath
.cOption("AutosaveFilename") = sPDFName
.cOption("AutosaveFormat") = 0 ' 0 = PDF
.cClearCache
End With
'Print the document to PDF
ActiveSheet.PrintOut copies:=1, ActivePrinter:="PDFCreator"
'Wait until the print job has entered the print queue
Do Until pdfjob.cCountOfPrintjobs = 1
DoEvents
Loop
pdfjob.cPrinterStop = False
'Wait until PDF creator is finished then release the objects
Do Until pdfjob.cCountOfPrintjobs = 0
DoEvents
Loop
pdfjob.cClose
Set pdfjob = Nothing
end sub
Have any questions, just have to poke me.
Michael -
Vbscript runtime error 429 activex component can't create object
hi i am writing a VB Script where it runs a batch files
but when the batch file is called from the script its giving error as
runtime error 429 activex component can't create object
my script is as follows
strcmd = "utility.bat"
Set wshSystemEnv = wshshell.Environment("USER")
wshshell.Run strcmd
can some one help me with this ?
Thank youSorry, your script makes no sense. You never create the object wshshell
and you never use the object wshSystemEnv. Start the code with
set WshShell = WScript.CreateObject("Wscript.Shell") -
Runtime Error '429': ActiveX component can't create object
Hi,
I am using below code in vb6 application but this is throwing an "Runtime Error '429': ActiveX component can't create object" error.
CreateObject("OracleInProcServer.XoraSession")
is that due to any dll or reference error ?
I have an Oracle client installed on my PC
please share your solution
Thanks in advanceAre either of those 64 bit? If so, your problem is likely related to that.
A 64 bit Oracle client doesn't support OO4O at all, so this code will never work with that client. You need to use a 32 bit one.
If you are using a 32 bit client but on a 64 bit OS, I've found the 11.2.03 installer doesn't properly register the files. Manually registering OraOleDB11.dll may fix it, though we had to do some other registry stuff and it got very ugly. Backing up to a slightly older client should also fix the problem. -
XL Reporter Run-time Error '429' ActiveX component can't create object
Hi Everyone,
When trying to install XL Reporter on a Windows 2003 Server SP2 machine getting the following Error:
XL Reporter
Run-time error '429':
ActiveX component can't create object.
Did anyone get this error? Please advise of any steps we can try to resolve.
Kind Regards,
KafilDear Friend,
I had described the problem to our technical support team, and they replied as follows u2013
They solved the Script related error by several stages.
They checked the machine for any mal-ware existence by the tool provided by Microsoft (MS Mal-ware remover).
Then they tried by installing the following patches from Microsoft u2013
http://support.microsoft.com/kb/949140
Windows Script 5.7 for Windows XP
http://www.microsoft.com/downloads/details.aspx?familyid=887fce82-e3f5-4289-a5e3-6cbb818623aa&displaylang=en
Windows Script 5.6 for Windows Server 2003
http://www.microsoft.com/downloads/details.aspx?FamilyId=C717D943-7E4B-4622-86EB-95A22B832CAA&displaylang=en
Windows Script 5.6 for Windows XP and Windows 2000
The internal matter to this problem was about the following DLL and its version u2013
C:\WINDOWS\system32
vbscript.dll
5.5.0.8820
Desired
5.6.0.8820
Check, if the information helps you. -
ActiveX Component Can Not Create Object
Obviously, this error is not rare and not limited to Adobe. What is troubling about this one for me is that it happens so inconsistently. I'm programming in VS2005/VB.net. The application receives incoming faxes in TIF format and converts them to PDFs.
The files get routed through our company and at two points the PDF files get watermarks added. There is a single procedure that applies both watermarks. The error is never generated on the first call and happens less than 25% of the times on the second call. It happens on some computers more than others. I trap for the error and I'm able to deal with it, but it would be better if I could stop it from happening. All of our users have Acrobat Standard version 8.1.0
Any help is appreciated.
Thanks,
GregWell, it is hard to say exactly where it is happening because it has never happened on my development machine. I have the Apply Watermark() procedure trapped in a Try...Catch block and that is what throws the exception. Below is the procedure. The parameters passed in are a the file name, the text of the watermark, and either a 1 or a 0, depending on whether it is the first or second watermark. Above this procedure, the only thing that happens to the document prior to the Apply Watermark call is that the PDF document is moved from a temporary holding folder on the server to a permanent folder on the same server. The file is moved and then the watermark is applied.
Public Sub ApplyWaterMark(ByVal sPDFFileIn As String, ByVal sWatermarkStr As String, ByVal iIndex As Integer)
' global variables
Dim jsObj As Object
' Create a PDDoc IAC object.
Dim pdDoc As Acrobat.CAcroPDDoc
pdDoc = CreateObject("AcroExch.PDDoc")
If pdDoc Is Nothing Then
MsgBox("Failed to create Acrobat PDDoc object.")
Exit Sub
End If
Rename(sPDFFileIn, sPDFFileIn & "temp")
' Open the source PDF document
Dim rc As Integer
rc = pdDoc.Open(sPDFFileIn & "temp")
If rc <> -1 Then
MsgBox("Failed to open PDF document " & sPDFFileIn, MsgBoxStyle.Critical)
Exit Sub
End If
' Acquire the Acrobat JavaScript Object interface from the PDDoc object
jsObj = pdDoc.GetJSObject
' make a color object
Dim oColor As Object
oColor = jsObj.color.black()
' Add a text watermark.
' function prototype:
jsObj.addWatermarkFromText(sWatermarkStr, 2, "Helvetica", 10, oColor, 0, 0, True, True, True, 0, 2, 1, 200 + iIndex * 30, False, 1.0, False, 0, 1)
' save the PDF with watermarks to a new document.
rc = pdDoc.Save(1, sPDFFileIn) ' full save
' close original PDF.
pdDoc.Close()
pdDoc = Nothing
jsObj = Nothing
' to clean up, get the Acrobat application,
' close Acrobat if there are no open documents.
Dim gApp As Acrobat.CAcroApp
gApp = CreateObject("AcroExch.App")
If gApp.GetNumAVDocs = 0 Then
gApp.CloseAllDocs()
gApp.Exit()
End If
' show message. You can comment it out if you really need a quiet operation.
If rc <> True Then
MsgBox("The watermark failed to apply. This document was not time stamped.", MsgBoxStyle.Critical)
Else
Kill(sPDFFileIn & "temp")
End If
End Sub -
Visual Basic 6 application moved to new server - activex component can't create object
I have to move a VB6 application that was running on a Windows 2003 machine to a new Windows 2008 machine.
This EXE application was using classes defined in a DLL using the Createobject method.
Now, after the class instance has been created by Createobject, when the program calls the methods error 429 "activex component can't create object" is issued.
The DLL has been registered on the new server using the command :
regsvr32 c:\folderx\dllname.dll
Which is the right forum to get help on this ?
Thanks.Hello,
As Dave says, VB 6 is no longer supported by Microsoft.
I’d suggest asking in one of the following third-party forums which support Visual Basic 6.
VB forums
VB City
For further information, see:
Where to post your VB 6 questions
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
Acrobat 9 - AcroExch.PDDoc - ActiveX component can't create object
For opening a PDF file, I used following statement in VB6 :
Set AcroFirstDoc = CreateObject("AcroExch.PDDoc")
but it failed, with error "429- ActiveX component can't create object"
I was searching for solution. I found one link -
http://www.bigresource.com/Tracker/Track-vb-oY6Wgt9R/
Is this true?
What could be the problem? I need urgent help.
ThanksIf you want it
to continue working after you log off you have to change the COM+ properties
of the package to run as a specific user.
I recently installed the Evaluation edition of BizTalk Server, but am
finding
that I need to reinstall the software every time I log off(I am using the
same
logon throughout).
The problem I think is that BizTalk cannot start the XLANG Scheduler COM+
component - If I try to start it manually (in Component Services) I get
"Catalog
Error: Error Code 80080005 - Server Execution Failed"
more info: http://www.programd.com/118_4e0323a255219dd1_1.htm
If I try to run the XLANG Schedule created in the Tutorial, via
ExecuteTutorial.exe, the error message is "...ActiveX Component can't create
object. Error: 429 (0x1AD)"
BizTalk is unable to run any XLANG Schedule, I also have a Schedule setup
which
is activated via a File Receive Function. This fails also.
The System Log reports the following error every minute (at least!):
"The server{bla bla bla}did not register with DCOM within the required
timeout"
The only solution I have found is to reinstall & even this is not successful
every time.
Has anyone else seen this problem? Any suggestions? -
ActiveX Component Can't Create Object
Hi Frds,
Getting this error when making a chances in change query global defination Error : Runtime Error '457': This key is Already is already assosiated with an element of this collection..When i was clik on then again i m getting message like Runtime Error ''429': ActiveX Component Can't Create Object.
What is the excat prblem can any one let me know...
Thanks,
ALiHi,
For Runtime Error '457'-Pls Check SAP Note - 517232
ForRuntime Error '429' You can refer SAP Note: 542933
Pls chk this link also;
https://websmp207.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=542933&_NLANG=E
Hope this helps
Regards
CSM Reddy -
I've looked at all the other threads I could find in Technet that look close to this issue.
In my BDD.log, the last entry is "FAILURE (Err): 429: CreateObject(Microsoft.BDD.Utility) - ActiveX component can't create object" right after "RUN: regsvr32.exe /s "C:\Users\ADMINI~1\AppData\Local\Temp\Tools\x64\Microsoft.BDD.Utility.dll""
I have the following:
C:\_SMSTaskSequence folder
C:\MININT folder
LiteTouch.wsf link under the Startup Folder
Deployment share is mapped properly
System logs in automatically as local administrator
Even with this, it does not automatically resume the imaging job. I do not understand why it is not continuing.
If I launch the LiteTouch.wsf from an Admin elevated cmd window, the Task Sequence resumes like nothing was wrong.
Any guidance is appreciated!
EDIT1: I changed my customsetting.ini file to join a workgroup instead of the domain and it appears to be continuing without issue now. Is there something I am missing as to why it does not automatically run when it joins to a domain?Just wanted to provide an update.
So, i took the suggestion of a few other blog posts and moved the object into the Computers Container in AD so it did not have any policies impacting it. After doing this, it properly cycles through the application installs and reboots in the Task Sequence
while joined to the domain.
Is there an sort of comprehensive list of GPO settings that break MDT? The ones I have found (legal prompt, etc.) we do not do so it has to be something else. -
working with MDT 2013 & ADK 8.1,
Windows 8.1 x64 deployment fails in section "State Restore" (Deployment Type: NEWCOMPUTER).
RUN: regsvr32.exe /s "C:\Users\ADMINI~1\AppData\Local\Temp\Tools\x64\Micrsoft.BDD.Utility.dll"
"FAILURE (Err):429: CreateObject(Microsoft.BDD.Utility) - ActiveX component can't create object"
go to "%programdata%\microsoft\windows\start menu\programs\startup" and perform the "Litetouch.lnk" with elevated rights (right click run as administrator), the ts will continue and apply the OS without any error message.
join to workgroup instead to domain and the installation will perform without any error...
any help is appreciated.
thx a lot.
The error was AD policy related.
I moved the device to an AD Folder (no policy), deployed the windoows 8 again and moved the box back to the correct ou in TS section PostInstall - Custom Tasks using a ps script.
I did not figure out which policy.
Update: moved from W8.1 EVALUATION to offical release solved my problem!Which policies are causing this? Do you have anything that limits/modifies the local administrator account? Or restricts the loading of ActiveX?
Keith Garner - keithga.wordpress.com -
Hi,
I try to capture a custom image but at the end of the process, I get the following error (see attached image):
ZTI ERROR - Unhandled error returned by ZTIWindowsUpdate: ActiveX component can't create object (429)
Could someone help me to solve this please?Hi everybody,
I'm getting this message time to time and I don't know why. I have the ZTIWindowsUpdate.log who says:
<![LOG[Ready to Opt-In to Microsoft Update: WUA Version: 7.6.7601.18804]LOG]!><time="15:35:07.000+000" date="04-14-2015" component="ZTIWindowsUpdate" context="" type="1" thread="" file="ZTIWindowsUpdate">
<![LOG[ZTI ERROR - Unhandled error returned by ZTIWindowsUpdate: ActiveX component can't create object (429)]LOG]!><time="15:35:37.000+000" date="04-14-2015" component="ZTIWindowsUpdate" context="" type="3"
thread="" file="ZTIWindowsUpdate">
<![LOG[Event 41002 sent: ZTI ERROR - Unhandled error returned by ZTIWindowsUpdate: ActiveX component can't create object (429)]LOG]!><time="15:35:38.000+000" date="04-14-2015" component="ZTIWindowsUpdate" context=""
type="1" thread="" file="ZTIWindowsUpdate">
Do we have an explanation for this issue? Or, do you know how to fix that? -
Internetexplorer.application activex component can't create object
I am getting the infamous 429 error with a new image of Windows 2003 Server.
I am sure this is an issue with the Windows 2003 Server image, so I have to figure out a work around to get this to work. No updates to the image are possible. I have been searching for a solution for a couple of days and nothing I have
tried has worked so any assistance you can provide is most welcome.
This script works just fine on my Windows 7 machine and used to work just fine on the previous image of Windows 2003 Server I had which is no longer available:
Err.Number: 429
Err.Description: "ActiveX component can't create object"
Here is the code:
On Error Resume Next
Set fsoObj = CreateObject("Scripting.FileSystemObject")
Dim objIE
Err.Clear
Set objIE = CreateObject( "InternetExplorer.Application" )
If ( Err.Number <> 0 ) Then
WScript.Echo "Number (" & Err.Number & ")" & vbCrLf _
& "Description [" & Err.Description & "]"
WScript.Quit
End If
objIE.Navigate "about:blank"
objIE.Width = 200
objIE.Height = 300
Do Until objIE.ReadyState = 4
WScript.Sleep 200
Loop
Do While objIE.Busy
WScript.Sleep 200
Loop
bodyStr = javaScriptStr & "<table align='center'><tr><td align='center' colspan='2'>Click Run or Cancel</td></tr>" _
& "<tr align='center'>" & vbCrLf _
& "<td colspan='2'>" & vbCrLf _
& "<input type='submit' value=' Run ' " & "OnClick='VBScript:OK.Value=1'>" & vbCrLf _
& " " & vbCrLf _
& "<input type='submit' value=' Cancel ' " & "OnClick='VBScript:CANCEL.Value=1'>" & vbCrLf _
& "</td></tr>" & vbCrLf _
& "</table>" & vbCrLf _
& "<input type='hidden' id='CANCEL' name='CANCEL' value='0'>" & vbCrLf _
& "<input type='hidden' id='OK' name='OK' value='0'>"
objIE.Document.Body.InnerHTML = bodyStr
objIE.Visible = True
Do While ( ( objIE.Document.All.CANCEL.Value = 0 ) AND ( objIE.Document.All.OK.Value = 0 ) )
WScript.Sleep 200
If Err Then ' user clicked red X (or alt-F4) to close IE window
objIE.Quit
Set objIE = Nothing
logFile.WriteLine Now & " - aborting input!"
End if
Loop
objIE.QuitI tested this cleaned up version on WS2003. It works exactly the same way as it does on Windows 8 and Windows 7.
Set objIE = CreateObject( "InternetExplorer.Application" )
objIE.Navigate "about:blank"
objIE.Width = 200
objIE.Height = 300
Do While objIE.Busy
WScript.Sleep 200
Loop
bodyStr = javaScriptStr & "<table align='center'><tr><td align='center' colspan='2'>Click Run or Cancel</td></tr>" _
& "<tr align='center'>" & vbCrLf _
& "<td colspan='2'>" & vbCrLf _
& "<input type='submit' value=' Run ' " & "OnClick='VBScript:OK.Value=1'>" & vbCrLf _
& " " & vbCrLf _
& "<input type='submit' value=' Cancel ' " & "OnClick='VBScript:CANCEL.Value=1'>" & vbCrLf _
& "</td></tr>" & vbCrLf _
& "</table>" & vbCrLf _
& "<input type='hidden' id='CANCEL' name='CANCEL' value='0'>" & vbCrLf _
& "<input type='hidden' id='OK' name='OK' value='0'>"
objIE.Document.Body.InnerHTML = bodyStr
objIE.Visible = True
On Error Resume Next
Do While ( ( objIE.Document.All.CANCEL.Value = 0 ) AND ( objIE.Document.All.OK.Value = 0 ) )
If Err Then ' user clicked red X (or alt-F4) to close IE window
WScript.Echo Now & " - aborting input!"
WScript.Quit
End if
WScript.Sleep 200
Loop
WScript.Echo Now & " - EXITING!"
objIE.Quit
¯\_(ツ)_/¯ -
ActiveX component can't create object: 'MSSOAP.SoapClient30'
Dear All,
After updated the portal form 6.0 to 7.0 ,when I bit the web page entry ,the error:"ActiveX component 'scan't create object: 'MSSOAP.SoapClient30' " appear.But in version 6.0 ,it's fine.
What could be the problem? How to resolve this.
Regards,
Richard LeeIf you want it
to continue working after you log off you have to change the COM+ properties
of the package to run as a specific user.
I recently installed the Evaluation edition of BizTalk Server, but am
finding
that I need to reinstall the software every time I log off(I am using the
same
logon throughout).
The problem I think is that BizTalk cannot start the XLANG Scheduler COM+
component - If I try to start it manually (in Component Services) I get
"Catalog
Error: Error Code 80080005 - Server Execution Failed"
more info: http://www.programd.com/118_4e0323a255219dd1_1.htm
If I try to run the XLANG Schedule created in the Tutorial, via
ExecuteTutorial.exe, the error message is "...ActiveX Component can't create
object. Error: 429 (0x1AD)"
BizTalk is unable to run any XLANG Schedule, I also have a Schedule setup
which
is activated via a File Receive Function. This fails also.
The System Log reports the following error every minute (at least!):
"The server{bla bla bla}did not register with DCOM within the required
timeout"
The only solution I have found is to reinstall & even this is not successful
every time.
Has anyone else seen this problem? Any suggestions?
Maybe you are looking for
-
How can I get an flv video to stop playing when I exit the page it's on?
The audio continues to play no matter where I navigate on the site. Thanks
-
How can i transfer all my data 250 GB from external hard disk to MAC pro
How can i transfer all my data 250 GB from external hard disk to MAC pro
-
Tried to upgrade the OS to 4.5, now bricked?
Hello all! I am new to BlackBerry devices and last week I purchased an unlocked 8320 Curve from eBay. I've loved it really. I jumped ship from an iPhone because I was tired of not having certain features. I came across an update for the OS as my curr
-
HT4613 But does new Apple TV HD support closed captioning?
Apple TV HD is new and small; but does it step forward software-wise to support Closed Captioning, and SubTitles?
-
Pages for iPad--different first page
I haven't been able to find a way in Pages for iPad to create a different first page for headers and footers. Is it possible?