Profile and sms

Hi I have a hp pre3 and I wonder if it's possible to port my informations, mostly my sms, into another phone: htc one. When I configured the Htc one, there is an option to port informations from a previous phone but, of course, Webos devices weren't included. Is there a way to do it? Thank you in advance.

Hello,
You should ask in the
Windows Phone Development forums.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Similar Messages

Different alerts for email and sms messages for a contact with custom ring tone

Hello,
I have a Curve 8530 with OS 5.0.0.395.
I have my default sound profile set up to play one type of alert sound when I receive and email message and another when I receive an SMS message (so I know the difference without looking at my phone). That works fine except for contacts that I also have a custom ring tone set up for. It seems that under the Custom Ring Tones/Alerts section of the contact there is only one entry for Messages and it applies to both email and SMS. If I have the contact's message alerts set to the alert I have for email, then their SMS messages play the same alert and I might think it's an email. Or if I have the messages alerts set to the SMS alert sound then their emails sound like SMS messages. Is there a way to have a custom ring tone set up for a contact but still allow their emails and SMS messgaes to follow the current sound profile's settings?
Thanks.

Hello,
Have you had any luck resolving this issue. I had a 8230 and this was possible. But like you I can get the 8530 to work. If you found the solution, please let me know.

IPhone 4 Can't receive incoming calls and sms after 3G has been activated

I can't receive incoming calls and sms on my iPhone 4 after the 3G connection has been activated and used actively by me. Outgoing calls and messages do work and as long as I use the Wi-Fi connection everything's fine but the problem appears after switching to 3G. Any help? Thx in advance!

I think the next step is to do a reset by holding the sleep and home buttons down at the same time until the Apple logo appears. If you haven't done this before, keep holding the buttons when the turn off slider appears. The screen will go black and after what seems like an eternity, actually several seconds, the Apple logo will appear. When the logo appears, release the buttons.

Problem with Cisco IPMA - between the manager profile and assistant profile

Greetings to all.
The problem basically is that wen I do a call (internal o external) to the extension configured in the manager phone, the assistant phone dosen`t rings or take the call, even the call in progress dosen`t appears in the Cisco Unified Communications Manager Assistant Console of the Assistant
Also the icons of the IPMA in the manager phone dosen`t appears.
I have check the following:
1.The configurations on both profile and its look ok
2.I have restar the Cisco IPMA, CTI and Tomcat Service
3.I have reconfigured the profiles
What else I can do
What is the most common cause in these cases
Thanks

I have the same problem, did you resolve it ?
Our Customer have about 50 IPMA and there are work. The problem is only with 4 IPMA Assistance (always the same). Sometimes (few times in week) lost Assistance icon Managers, and Managers doesn’t see shared lines, Intercom, services IPMA on phone doesn’t work. But sometimes Assistant icon is showing but Manager don’t see active connection and can’t call via Intercom.
Assistance have 7962 Phone with load cmterm-7942_7962-sccp.9-2-3.cop.sgn
Managers have 7965 Phone with load cmterm-7945_7965-sccp.9-2-3.cop.sgn
CUCM (PUB/SUB) is 8.6.2.20000-2
I opened a TAC case already but the problem is not resolved.

ODI Data Profiling and Data Quality

Hi experts,
Searching about ODI features for data profiling and data quality I found (I think) many ... extensions? for the product, that confuse me. Cause I think there are at least three diferents ways to do data profiling and data quality:
In first place, I found that ODI has out of the box features for data profiling and data quality, but, acording to the paper, this features are too limited.
The second way I found was the product Oracle Data Profiling and Oracle Data Quality for Oracle Data Integrator 11gR1 (11.1.1.3.0) that is in the download page of ODI. Acording to the page, this product extends the existing inline Data Quality and Data profiling features of ODI.
Finally, the third way is Oracle Enterprise Data Quality that is another product that can be integrated to ODI.
I dont know if I understood good my alternatives. But, in fact, I need a general explanation of what ODI offer to do Data Quality and Data profiling. Can you help me to understand this?
Very thanks in advance.

Hi after 11.1.1.3 version of ODI release, oracle no longer supports ODP/ODQ which is a trillium software product and this not owned by oracle. Oracle is recommending the usage OEDQ for quality purposes. It's better if you could spend time on OEDQ rather than trying to learn and implement ODP/ODQ in ODI

Oracle Data Profiling and Data Quality

Hi,
How to create metabase for Oracle Data Profiling and Data Quality.Is metabase and repository are same.

Hi,
You can create a metabase in the Metabase Manager:
- Expand Control Admin
- Click on Metabases
- in the Metabases window, right-click on the white area and select Add...
- go through the wizard to create your metabase
This is documented in the ODQ/ODP tutorial (http://www.oracle.com/technology/products/oracle-data-quality/pdf/oracledq_tutorial.pdf) and in the Documentation (in Metabase Manager or Oracle Data Quality go to Help and then Manuals).
Thanks,
Julien

Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I d

Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I do have it listed in my Firewall as an exception program with Permit All. What is happening?
== This happened ==
Every time Firefox opened
== After removing Firefox and Reinstalling it. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; MS-RTC LM 8)

If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See also [[Basic Troubleshooting|#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]

How to get email and sms alerts in 9i

Hi,
I want to know that is there any method in 9i by which we may get mail and sms alerts whenever anything goes wrong with the database?
Thanx

Why pay for something if you already have it, included in your license?
Only because you have to read documentation to use it?
Oracle will sooner or later include functionality in their monitoring products, they don't include in the RDBMS. In 10g you already rather use the controls than call the PL/SQL Apis directly.
Apart from that: the third party products you seem to promote, usually implement very limited functionality.
Sybrand Bakker
Senior Oracle DBA

Sending messages thru email and SMS without using XMS APIs

Hi,
I already have some working code that sends messages thru email and SMS. But currently it uses XMS APIs therefore I have a dependency on files like wdk.jar. I want to try and eliminate using the XMS APIs and only use soap to send these messages. I was wondering if there is some documentation available on how I can do this. Also if there a lot of code that needs to be written to do that.
I primarily want a very simple application that sends only string messages and reduce my dependencies.
I would really appreciate all the advice.
Thanks,
Sonali Nath

Hi,
You may refer to the following links to check if they help:
Sending SCCM Status Messages from MDT Scripts.
Send SCCM task sequence email report
Regards,
Sabrina

Problems with email and SMS after 1.3.5

Let me first say that I love the Pre. Up until this point it has been perfect - I have a replacement, but that is because I dropped it (wrong angle, wrong location, broken screen). However, following the 1.3.5 update I'm now having a fairly important problem with email and sms - I can receive email and messages, but not send them.
I have two email accounts. My personal account is with earthlink. My work account goes through an ISP using the domain name of my employer. I'm not using Microsoft Exchange or Outlook. I have tried deleting and reentering the accounts and that did not work. I can receive messages but get error messages when I try to send.
The same for messaging. I don't use it very often. But yesterday I get a text message and tried to respond and got the error message.
I power the phone off every night because I have a landline and use that as the primary phone at home.
I have been looking around message boards trying to find a fix for this. Has anyone had this issue and resolved it?
Thank you.
Post relates to: Pre p100eww (Sprint)
Message Edited by starburst42 on 01-05-2010 07:06 AM
This question was solved.
View Solution.

I forgot to add that this is a stock Pre. There are no patches or homebrew apps.
Edit:
I found a fix for the email problem, in posts on precentral and this board from a few months ago. The info came up in a Google search, and not searches of the boards, which is kind of frustrating. Here is the info, and the link. I really wish Palm would put info about this work around on their site, or at least make it easy for people to find. The solution is the last message in the thread linked below:
Had the same problem. Checked with Earthlink - no help. Checked with Sprint - no help. Checked with Palm - no help. Here is what finally worked:
Delete the earthlink account and start over. When you do - this is the key - set up the account manually! If you use the Pre defaults and try to change the settings it will not correct the problem. Your settings for outgoing mail must be:
"smtpauth.earthlink.net"
Use Authentication set to "on"
username is your email address
your email password
port set to "587"
encryption "none"
Again, the key is to set up manually.
smtp email fix
Message Edited by starburst42 on 01-06-2010 12:08 PM
Message Edited by starburst42 on 01-06-2010 12:09 PM

Remove push and sms notifications during a call

it is possible to remove audio (push and sms notifications) during a call?
if not, fix it!!!!

Sorry but there isn't any options for what you are asking.
http://apple.com/feedback if you care to suggest it.

Separate Email and SMS messages not found

Hi Guyz,
I'm just wondering, I can't find any options under messages separating email and SMS messages on my 8100. Would this be a platform issue? My current platform is v4.2.0. Is there a way to download and upgrade a new platform? Or can i just download a theme that has that option...
Thanks in advance

Go into messages,
Press Menu button,
Scroll to options,
then general options,
scroll down and you will see SMS and Email inboxes: Theme controlled etc, change it to seperate.
If your issue is resolved, put a checkmark in the green box that contains the resolution.
OR
If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
~Gday from Down Under~

Email Messages Have Started Arriving as Both Email and SMS

All of a sudden, all of my email messages have started arriving on my iPhone as both mail and SMS messages. This happened yesterday (Mon., 3/3/2008) evening. I had downloaded the latest iPhone software the previous day and had had no initial problems in the first 24-plus hours. I haven't intentionally changed any settings. Does anyone have any idea what's going on?

Mine, too. Although I hope by posting this "all's well" message that I don't cause it to start again. Regardless, good to know I wasn't alone with this issue. Thanks!

EMail and SMS problem

hi
I just got a Blackberry Pearl. I configured it to receive my email. Now there is an email icon and all the email goes there. BUT it also started going into the folder that was the repository for SMS text messages. So someone told me to go into general options, select SMS and Email inboxes and choose Separate. I did that but wiht the net result that the SMS folder now shows only my email and the Email folder also shows my email.
The only way to get to my SMS inbox is to select the menu options, select View FOlder, then select SMS Inbox which is a little cumbersome.
How do i fix that so my emails go to my email folder and the SMSes go to my SMS folder?
ALso is there a way to prevent the Blackberry from notifying my every time i get a new email. I am fine with being notified when I get a new SMS?
thanks
Sandip
Solved!
Go to Solution.

To create seperate folders for email and sms, yes you open any of you message folders and hit the menu key, select options then general options, scroll down to sms and email inboxes, change that to seperate. then hit the back key and select save. You should now have a sms icon for text, an icon for each email and an icon for messages that will catch everything. If you do not have these icons try a battery pull. Remove the battery with the phone on and leave it out for 30 seconds. Replace it and allow the phone 1-3 minutes to reboot. Can you now find all the icons?
~Lorrie~ Master of All Things Blackberry!

Email and SMS Alerts - Solution Manager - PI and EP

Hi All,
I am trying to do the below scenario.....But somehow i am lost in the process.
I have a three system PI landscape and a Solution Manager. I have included the DEV PI in solution manager for CCMS,the CCMS agents are online and it also reflects in RZ20.
Now the requirement is SOLMAN should send email and sms alerts in below situations which occur in PI system.
1.The ABAP or JAVA engine goes down.
2.One of the filesystem crosses certain predefined limit.
3.Any of the java server node stops working
4.If any critical job gets cancelled in sm37
I am looking at steps on how to define the alert categories, auto reaction methods, also the nodes where i have to assign these auto reaction methods.
I have gone through CCMS documentations, played all sim files and gone through most of the pdf files but i am not able to establish proper steps to do it.
I am Redhat Linux,Oracle 10g, SOLMAN 7 with PI7
Can i extend the same for the EP systems also which are pure Java Stack Systems ?
Also i would like to know if i can send customized alert messages.
Best Regards
Raghu

Hi Juan,
Thanks for your response.
I am looking at the MTE classes i.e for the above situations which MTE classes are required.
Also i have read in some document that we can send the alerts directly to the email IDs and cell numbers without having to mention them in user masters in SU01. Where to mention these ?
I have my SCOT settings done for email servers.
The process which i had built up in my mind is all mixed up and i am lost where to do which configuration
Best Regards
Raghu

Profile and sms

Similar Messages

Maybe you are looking for