Profile configuration for my app

Is it possible to set preference values for my app in the profile configuration file? If so, an example would be greatly appreciated. Thanks.

Hi,
Have you ever figured out a way to use iPhone configuration utility for your own app? I'm looking into mechanisms for this purpose as well.

Similar Messages

Partner Profile configuration for EDI 810

Hi,
I am configuring partner profile for EDI 810 (Invoice). In the message control tab, what values should be entered for
1. Application
2. Message Type and
3. Process Code
Thank you.

Hi,
- Check Transaction NACE to see what applicatios you can use for different objects.
- Check transaction WE42 for all outbound process codes
- Check transaction WE41 for all inbound process codes.
- Check transaction WE64 for inboud / outbound message types and related process codes.
EDI 850:
Application - EF
Process code - ME10
Message type - NEU ( or your custom message type setup for EDI )
IDOC - ORDERS01 to ORDER05
EDI 810:
Application - V3
Process code - SD09
Message type - RD00 ( or your custom message type setup for EDI )
IDOC - INVOIC01 , INVOIC02.
EDI 820:
i think this is for inbound idoc of Payment Order/Remittance Advice. When yuo setup inbound partner profile, you do not need to know application
Process code - LOBX
Message type - LOCKBX
IDOC - PEXR2002
Let me know if you need any other information.
Regards,
RS

HR Configuration for BI Apps

We are lookng for feedback on how other people have dealt with configuration changes to HR spreadsheets. For example, we had to make configuration changes to event types and it appears we have to reprocess that table. We make a special subject area and execution plan in DAC and updated the refresh date for the D and DS table to be way in the past. Is this the correct approach and will this have to occur every time a configuration change is made?

Can anyone who has done a vanilla implementation of BI Apps (7.9.4) check the files in /opt/oracle/informatica/server/SrcFiles and see +how many files/sessions have the TYPE2_FLG=Y vs. TYPE2_FLG=N.

Project Analytics - PA - Configurations for Oracle Apps 7.9.6

Guys - I have gone through the docs and cannot find what configuration steps are necessary for us to run OBAW / DAC loads for PA (Project Accounting / Project Analytics).
Any pointers are greatly appreciated.
Regards,

Here are the main steps:
Install OBIEE
Install OBIA (e.g. 7.9.6) use Project analytics option while install
Create Target Database ( e.g. 10.2.x or 11g)
Install Informatica (e.g. 8.6, SP4)
Client
Server (Server / Repository)
Integration Service and Repository Service
Install DAC (e.g. 10g)
Install DAC client
Install DAC Server
Restore Informatica Repository
Restore DAC Repository
Register Informatica Repository services with DAC
Connect DAC to DW
Create Custom Container in Informatica for ETL loads

Websphere Integration Question: No profile configured

Hi Everyone,
I am integrating websphere 6.1 without reverse proxy.
I had the following configure and working.
- NetpointWASregistry
- TAI configured and loaded
- OblixAnonymous Mapped Roles to users
- Anonymous Policy for the protected site setup at the DomainPolicy.
Could anyone explain to me what causes this error and advice me what should i do?
=========== Error Logs from Netpoint Registry Logs ===========
Fri Sep 03 13:59:10 SGT 2010: NRD014 : Return value of NetPointRegistry: getUserDisplayName CN=Aloysius SIM,OU=SPG,OU=Staffs,OU=Domain Users,dc=test,dc=ovd
Fri Sep 03 13:59:10 SGT 2010: NRD036 : Return value of NetPointRegistry: getUniqueUserId CN=Aloysius SIM,OU=SPG,OU=Staffs,OU=Domain Users,dc=test,dc=ovd
Fri Sep 03 13:59:10 SGT 2010: NetPointRegistry: getUniqueGroupId: TOPS-SubProgramCreators
Fri Sep 03 13:59:10 SGT 2010: NetPointRegistry: isValidGroup : TOPS-SubProgramCreators
Fri Sep 03 13:59:10 SGT 2010: NetPointRegistry: getGroupDisplayName : TOPS-SubProgramCreators
Fri Sep 03 13:59:10 SGT 2010: NetPointRegistry: realGetGroupDisplayName : TOPS-SubProgramCreators
Fri Sep 03 13:59:10 SGT 2010: SCD012 : Soap Request : <?xml version="1.0" encoding="UTF-8"?><SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas-xmlsoap.org/soap/envelope/"><SOAP-ENV:Body><oblix:authentication xmlns:oblix="http://www.oblix.com" type="basic"><oblix:login>sso-sunnyt</oblix:login><oblix:password>Passw0rd123</oblix:password><oblix:domain></oblix:domain></oblix:authentication><oblix:request application="groupservcenter" function="view"><oblix:params> <oblix:param name="uid">TOPS-SubProgramCreators</oblix:param> <oblix:param name="attrName">cn</oblix:param></oblix:params></oblix:request> </SOAP-ENV:Body> </SOAP-ENV:Envelope>
Fri Sep 03 13:59:10 SGT 2010: SCD014 : Soap Response: <?xml version="1.0" encoding="utf-8"?><SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"><SOAP-ENV:Body><Oblix xmlns:oblix="http://www.oblix.com/" xmlns="http://www.oblix.com/" oblang="en-us"><ObError><ObRequestInfo>297753616</ObRequestInfo><ObTextMessage>There is no profile configured for this kind of group.</ObTextMessage><ObStatus>1</ObStatus></ObError><ObStatus>1</ObStatus></Oblix></SOAP-ENV:Body></SOAP-ENV:Envelope>
Fri Sep 03 13:59:10 SGT 2010: Error message from SOAP response: There is no profile configured for this kind of group.
Fri Sep 03 13:59:10 SGT 2010: NRD026 : Return value of NetPointRegistry: realGetGroupDisplayName null
Fri Sep 03 13:59:10 SGT 2010: NRD029 : Return value of NetPointRegistry: isValidGroup false
Fri Sep 03 13:59:10 SGT 2010: NetPointRegistry: getUniqueGroupId: TOPS-Scheme Admin
Fri Sep 03 13:59:10 SGT 2010: NetPointRegistry: isValidGroup : TOPS-Scheme Admin
Fri Sep 03 13:59:10 SGT 2010: NetPointRegistry: getGroupDisplayName : TOPS-Scheme Admin
Fri Sep 03 13:59:10 SGT 2010: NetPointRegistry: realGetGroupDisplayName : TOPS-Scheme Admin
Fri Sep 03 13:59:10 SGT 2010: SCD012 : Soap Request : <?xml version="1.0" encoding="UTF-8"?><SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas-xmlsoap.org/soap/envelope/"><SOAP-ENV:Body><oblix:authentication xmlns:oblix="http://www.oblix.com" type="basic"><oblix:login>sso-sunnyt</oblix:login><oblix:password>Passw0rd123</oblix:password><oblix:domain></oblix:domain></oblix:authentication><oblix:request application="groupservcenter" function="view"><oblix:params> <oblix:param name="uid">TOPS-Scheme Admin</oblix:param> <oblix:param name="attrName">cn</oblix:param></oblix:params></oblix:request> </SOAP-ENV:Body> </SOAP-ENV:Envelope>
Fri Sep 03 13:59:10 SGT 2010: SCD014 : Soap Response: <?xml version="1.0" encoding="utf-8"?><SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"><SOAP-ENV:Body><Oblix xmlns:oblix="http://www.oblix.com/" xmlns="http://www.oblix.com/" oblang="en-us"><ObError><ObRequestInfo>280675584</ObRequestInfo><ObTextMessage>There is no profile configured for this kind of group.</ObTextMessage><ObStatus>1</ObStatus></ObError><ObStatus>1</ObStatus></Oblix></SOAP-ENV:Body></SOAP-ENV:Envelope>
Fri Sep 03 13:59:10 SGT 2010: Error message from SOAP response: There is no profile configured for this kind of group.
Warmest Regards,
Grey
Edited by: grey on Sep 2, 2010 11:20 PM

Thanks for your response!
I think it is able to find the group, it only failed when it try to view the group. There are more logs from the identity servers. please give me some advice or insights that i should do or to look into.
=============================================================
"DN Prefix" semantic type in the Identity System Console
=============================================================
CN=TOPS-Scheme Users,OU=Applications,OU=Domain Groups,dc=test,dc=ovd
=============================================================
This is what is define in the properties file
=============================================================
OB_GroupSearchAttr=cn
OB_UserSearchAttr=cn
OB_UserAttr=uid
=============================================================
This is the oblix Logs in the identity Manager
=============================================================
2010/09/03@12:18:11.035000 5596 2252 DB_RUNTIME ERROR 0x00000712 dbmanager.cpp:995 "Could not get DB profile for operation" function^Manager::QueryInterfaceAll AppName^Oracle Access Manager Identity Server Instance identity dn^TOPS-Scheme Users
2010/09/03@12:18:11.035000 5596 2252 DB_RUNTIME ERROR 0x00000712 dbmanager.cpp:995 "Could not get DB profile for operation" function^Manager::QueryInterfaceAll AppName^Oracle Access Manager Identity Server Instance identity dn^TOPS-Scheme Users
2010/09/03@12:18:40.431000 5596 3024 DB_RUNTIME WARNING 0x00000010 \Oblix\oam\np_common\db\ldap\util\ldap_util.cpp:1788 "Operation will affect RDN of entry and the operation is not supported" dn^CN=SSO Sunny Tan,OU=Contractors,OU=Domain Users,dc=test,dc=ovd
2010/09/03@12:18:40.431000 5596 3024 DB_RUNTIME WARNING 0x00000504 \Oblix\oam\np_common\db\ldap\util\ldap_util.cpp:1832 "Exception during DB runtime code" function^ModifyDBEntryEx() dn^CN=SSO Sunny Tan,OU=Contractors,OU=Domain Users,dc=test,dc=ovd
=============================================================
This is the audit logs in the identity Manager
=============================================================
2010\-09\-03T09:35:51+0800 - Login - SUCCESS - sso\-toam01.test.mda - 10.205.52.177 - /identity/oblix/apps/groupservcenter/bin/groupservcenter.cgi - TOPS\-Scheme Users - Common - CN=SSO Sunny Tan,OU=Contractors,OU=Domain Users,dc=test,dc=ovd - - LoginId~sso\-sunnyt
2010\-09\-03T09:35:52+0800 - ViewProfile - FAILURE - sso\-toam01.test.mda - 10.205.52.177 - /identity/oblix/apps/groupservcenter/bin/groupservcenter.cgi - TOPS\-Scheme Users - Group Manager - CN=SSO Sunny Tan,OU=Contractors,OU=Domain Users,dc=test,dc=ovd - - ViewProfile~There is no profile configured for this kind of group.

Php update/configure for Server 4.0

I had working Apache2 + PHP 5.6 running perfectly locally for development.
Web Docs were located in /Sites folder in user directory.
After Installing Server 4.0 all my setup is messed up. I can configure website again but it not uses PHP I have upgraded to.
I feel lack of control/configuration for web apps with Server 4.0. How I can get it working back as perviously or uninstall Server 4.0?
Filip

I have found solution to fix Apache after uninstallation of Server 4.0
http://remonpel.nl/2014/08/restore-apache2-service-after-removal-of-server-app/# more-554
I found also more articles that maybe would help me running my websites with OS X Server.... but for now I have decided to not come back to try this.
http://remonpel.nl/

Nokia E63 device mgr. server profile configuration...

pls tell me
What is Nokia E63 device mgr. server profile configurations for my device update.
parsya82

Because the absent of this data indicates bigger issues, did you consider the Nokia Software Recovery Tool on a Windows computer already? If you are just about updating, did you consider the Nokia Suite already?

Apple Configurator: The configuration for your iPad could not be downloaded from organisation . Invalid Profile.

Good afternoon,
I am really struggling with a deployment of 10 iPad Minis.
The iPads are brand new and I have downloaded and installed Apple Configurator onto our Apple Air laptop.
I have configured Apple Configurator in the following way:
Under Prepared:
Settings
Name is ticked with 'Number sequentially starting at 1'.
Supervision is ticked to on, Allow devices to connect to other Macs is also ticked.
Update iOS is set to "When update is available". Erase before installing is ticked.
Restore is set to "Don't restore backup".
No profiles are listed in the profiles section.
Apps
I have copied in some appropriate apps.
Setup
Skip: Restore, Passcode, Siri, Touch ID, Apple Pay, App Analytics all ticked.
I have not configured Device Enrollment.
In "Configure Settings..." Device Enrollment is not configured.
After preparing my iPads, they all connect and prepare correctly. When I select any iPad and unlock it, the following happens:
Hello, slide to setup
Select language, UK selected
Select Your Country or Region, UK selected
Choose a Wi-Fi Network, correct network selected and authenticated
Location Services: Enabled
Configuration, "<organisation> can automatically configure your iPad". Apply Configuration or Skip Configuration. Apply selected.
Configuration, "The configuration for your iPad could not be downloaded from <organisation>. Invalid Profile.
Apple Configurator is showing no errors, have tried Supervise>Reset, makes no difference.
Have skipped configuration and erased iPad before trying again, same problem.
Any suggestions would be really appreciated.

FYI - This is an iPad user to user forum. Apple doesn't read the forum posts.
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
 Cheers, Tom

TS1702 We use one ID for the Apps store for 2 iPhones. In the second profile on the Macit is impossible to update apps there is a mistake. What is the decision?

We use one ID for the Apps store for 2 iPhones. In the second profile on the Macit is impossible to update apps there is a mistake. What is the decision?

This happens when you both use the same Apple ID for iMessage. To fix this you have two choices:
On one of the phones go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a different ID. Note: you can still share the same ID for purchasing in Settings>iTunes & App Stores; or
On both phones go to Settings>Messages>Send & Receive and uncheck the email address(es) shown under "You can be reached by iMessage at". Also uncheck the other phone's phone number, if present.

How to set flex builder profiler for AIR apps ?

Hi everybody !
I am trying to profile my AIR app but I can't run the profiler....
For flex app (in web browser) profiler works fine, for my AIR app, debug works but profiler just display 'socket timeout'.
I also try to profile my air app as an external application profiler start but crash saying NativeWindow not found (like AIR sdk was not found...)
SO How I can't set my AIR player or my profiler to work ???
Thx all and happy christmas !

Hello,
I would be glad if someone show me how to accomplish those. I am new to Java so I am not sure how to do those.
Best Regards.
1. create a batch file to launch your 'desktop' app - the batch file should set the proper environment (JAVA_HOME,, path, etc)
2. create a small wrapper application that is launched by Java web start.
3. the wrapper app will do nothing more use ProcessBuilder to execute the batch file you created which will then launch the app
That way Java web start can use 1.7 to launch the wrapper app but the batch file will set the environment to 1.5 for the other app.

Configuring socket policy for flex apps(with blocked port 843)?

We have built several flex-based ecommerce apps for a fortune 500 customer of ours, that for various reasons, we need to use sockets to a different domain and requires a socket policy file, but were having trouble configuring our flex apps for deployment in thier enviornment where they are blocking virtually everything except port 80 . The current documentation in in regards to socket policy files and crossdomain files in a non-standard configuration not using port 843 is not providing any useful help to us.
Here is the scenario:
Flex apps are served from domain www.a.com in to users browsers via http. The apps then make socket connections to domain www.b.com:80 where there are php scripts serving json data to the flex apps via port 80 using http(we use sockets because we need to set and read back http headers). The problem is the flex apps cannot make socket connections to the www.b.com domain without errors like below(unless we setup a socket policy server on port 843 of www.b.com, in which case everything works):
Warning: Timeout on xmlsocket://www.b.com:80 (at 3 seconds) while waiting for socket policy file. This should not cause any problems, but see http://www.adobe.com/go/strict_policy_files for an explanation.
Error: Request for resource at xmlsocket://www.b.com:80 by requestor from http://www.a.com/bin-debug/DownloadManagerFlex.swf is denied due to lack of policy file permissions.
Error: Request for resource at xmlsocket://www.b.com:80 by requestor from http://www.a.com.us/bin-debug/DownloadManagerFlex.swf is denied due to lack of policy file permissions.
Since we cannot use port 843 for the socket policy file server, we setup the socket policy server on a different ip in the same domain: spf.b.com:80 (using the sample perl code Adobe provides), and per the docs(cited below), use Security.loadPolicyFile("xmlsocket://spf.b.com:80") before we invoke "socket.connect", to supposedly tell the flash player to check there for the socket policy file. The problem, as you can see from the error log, is that the loadPolicyFile("xmlsocket://spf.b.com:80") is ignored.
No matter what we do or how we set things up, we cannot get the flash player to recognize the loadPolicyFile(), it always wants to go to the port were making the socket connection on. It is unclear how to properly configure the flex app, socket policy file and crossdomain file for the above scenario. The docs allude to being able to serve the socket policy file from a different port 80 in the same domain as the socket connection were trying to make, but were having no luck with that.
->Can anyone shed some light on how to make this work or what are we missing/doing wrong? Also, if we can get this to work, are we stuck with a 3 second delay because this(very large) customer is blocking port 843?
As an aside, the documentation for all this is a bit scattered, unclear and contrdictory:
One document says:(http://www.adobe.com/devnet/flashplayer/articles/fplayer9_security_07.html)
"This warning usually means one of two things: first, that you need to set up a
            socket policy file server on port 843, which is the first location that Flash
            Player checks by default; or second, that you need to provide more explicit
            guidance to Flash Player from ActionScript by calling loadPolicyFile to indicate the location
            of a socket policy file. When you call loadPolicyFile rather than allowing Flash Player to check
            locations by default, Flash Player will wait as long as necessary for a
            response from a socket policy file server, rather than timing out after 3
            seconds."
Another document says(http://www.adobe.com/devnet/flashplayer/articles/socket_policy_files.html):
"If an ActionScript Security.loadPolicyFile() command exists within               the SWF file, then the Flash Player runtime checks that location. Flash Player checks               the destination of the loadPolicyFile() only after it has checked the               master policy file on port 843 for permission to acknowledge other policy               files. If the developer has not specified a loadPolicyFile() command,               then Flash Player checks the destination port of the connection."

I found the reason why the Flex application was ignoring the socket policy (crossdomain.XML). I have a policy server that listens to port 843 and submits the policy to the Flex client. My policy was getting ignored by the Flex application and I was getting the sandbox security error you were getting. The solution to this problem isto write a null byte right after the policy server sends the policy. I'm using Apache Mina that is wrtten is Java and the null byte is written as follows:
public void sessionCreated (IoSession session)
        throws Exception
        session.write(_policy); -- > policy string
        session.write("\u0000"); --> null byte
         //session.close(true); ---> No need to close the session because it is closed by the Flex client after it receives the null byte.
Now my Flex application can read and accept the policy from port 843 and I'm not getting more security violations.
Thanks for your reply,
Alberto

HT2404 my hard drive crashed and nothing recoverable. Apple installed a new drive. How can I go back and download the apps I had purchased for my previous configuration, for instance Lion 10.7, and Photoshop Elements 10?

My hard drive crashed and nothing recoverable, local Apple Store installed a new drive. How can I go back and download the apps I had purchased for my previous configuration, for instance Lion 10.7, and Photoshop Elements 10?

A blank drive needs to be formatted first, you do that hold c boot (or hold option key boot) from the 10.6 install disk (or Lion USB)
Read how to format the drive in Disk Utility here
https://discussions.apple.com/docs/DOC-3044
How to install OS X
https://discussions.apple.com/docs/DOC-3251
Software Update fully,
Hold the option key and click on Purchases when in MAS to download your 10.7 etc.

I sign up for TAPJOY.While signing in,they install something in my PROFILE CONFIGURATION...When I check my Settings-General,I can't see the PROFILE OPTION! Please help me :) Im running ios 6.0.1

I sign up for TAPJOY.While signing in,they install something in my PROFILE CONFIGURATION...When I check my Settings-General,I can't see the PROFILE OPTION! Please help me Im running ios 6.0.1

Well, after another call with Apple support and the engineers, no success. After spending over 20 hours trying to debug this, I give up. Apple was basically fishing for a solution with trial-and-error settings on the iphone. Then they wanted me to plug in software to log my iphone connections to the router, etc, etc., etc., at which point I decided I no longer wanted to participate in their testing process and will simply return the router.
25 hours of my life I'll never get back.
Big bummer, and frustrating for all the obvious reasons.

Oracle Apps Profile Options for Disco 9iv2

What profile options and values need to be set for Oracle Apps, 11.5.9 using Discoverer 9iAS V2?

Check ML Note 105292.1 for tracing options specific to the HR module
Srini Chavali

When importing a spreadsheet with redeem codes into apple configurator, it says it's not the right codes for the app. But it is the right codes. I used one of the codes to purchase the app in itunes.

I have a cart of 25 ipads with a macbook air. I have logged into my VPP account and purchased the needed number of copies. I downloaded the spreadsheet. I took the first code from the spreadsheet, and logged into itunes using a regular account (not my VPP account), and used the code to download the app. I put the app into configurator and then tried to add the spreadsheet with the codes in it. It comes up and tells me that it is not the correct spreadsheet for that app. But it is the correct spreadsheet!! I tried re-downloading the spreadsheet again and even tried re-downloading the app. So I've now used two of my redeem codes and still can't get it to accept it into apple configurator. I removed the app from apple configurator and re-added it. The error message says it's not the right codes for the app "Grammar Games by Tap To Learn" and to please get the codes for "Grammar Games by Tap To Learn." It's the same one!

It won't let me edit my post, so I'm typing this reply to add...
I tried taking the version number out of the title. It looked like there were two spaces in the title "Grammar Games by Tap to Learn". So I even made sure that matched. I still can't import my codes. Any other things to try would be really appreciated.

Profile configuration for my app

Similar Messages

Maybe you are looking for