Profile Creation in BW using BDC
Hi,
Is it possible to create profiles in BW using BDC's?
Thanks,
Suja
Thanks a lot.
Have you tried this?
I did everything that is mentioned in the document. I can also see the profile generated successfully. But when I run the report is doesnt apply the necessary restriction.
I created a cube which has material,customer,invoice,date and 2 measures.I restricted Material to a single value as explained in the document.In Su01 it shows the correct values.But the query still runs for all the material values. I have omitted the heirarchy part of this document.Would that be the reason?
Any input on this would be veryh helpful. Thanks again.
Suja
Similar Messages
-
Creation of Material using BDC Session method & global class
Hi
Creation of Material using BDC Session method & global class by using oops.
can anyone plz help me outHi,
it looks like it's not possible to call this BAPI wihtout material number. Here is a quote from BAPI documentation.
When creating material master data, you must transfer the material
number, the material type, and the industry sector to the method. You
must also enter a material description and its language.
Cheers -
Creation of PO using BDC with ME21N - Urgent
Hi All,
My requirement is to create a Purchase Order using BDC. I'm using ME21N for BDC. I did recording and using that recording I wrote a program for BDC. BDC table is populated correctly, but while calling ME21N using call transaction, program is cuming back to the selection screen, without creating PO. And sy-subrc value after call transaction is '0'. Please let me know the problem.
Thanks in Advance.
Siva Sankar.Hi,
Put a break point after the call transaction statement(i.e, put break point on sy-subrc check)
and then check the message table.
if call transaction is suceessfull u will find a success messages in the I_messages table.
Regards,
Sriram -
Creation of PGI using BDC for tc VL02N is not happening..
Hi All,
i need to do Post Goods Issue (PGI) thro' BDC and after that i need to update the flag in Ztable.
its giving Success message and updating the database also.
but its not issuing the PGI.and further i want to create billing doc.So its compulsory to me to post PGI.
if i look into the BDCMSGCOLL structure its giving "NO BATCH INPUT DATA FOR SCREEN"? why this is happening?
please let me know immediately....
REFRESH: tt_bdcmsgcoll .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = wa_created-document_numb
IMPORTING
output = wa_created-document_numb.
REFRESH tt_bdcdata.
PERFORM bdc_dynpro USING text-001 text-002.
PERFORM bdc_field USING text-008
text-014.
PERFORM bdc_field USING text-009
text-011.
PERFORM bdc_field USING text-014
wa_created-document_numb.
PERFORM bdc_dynpro USING text-001 text-003.
PERFORM bdc_field USING text-009
text-036.
PERFORM bdc_field USING text-025
sy-datum.
PERFORM bdc_field USING text-008
text-035.
PERFORM bdc_field USING text-037
sy-datum.
PERFORM bdc_field USING text-038
text-029.
PERFORM bdc_field USING text-016
c_x.
CALL TRANSACTION c_t_del USING tt_bdcdata
MODE c_m
UPDATE c_u
MESSAGES INTO tt_bdcmsgcoll .
SORT tt_bdcmsgcoll BY msgtyp.
READ TABLE tt_bdcmsgcoll INTO wa_bdcmsgcoll WITH KEY msgtyp = c_e.
IF sy-subrc EQ 0.
LOOP AT tt_bdcmsgcoll INTO wa_bdcmsgcoll WHERE msgtyp = c_e.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = wa_bdcmsgcoll-msgid
lang = text-010
no = wa_bdcmsgcoll-msgnr
v1 = wa_bdcmsgcoll-msgv1
v2 = wa_bdcmsgcoll-msgv2
v3 = wa_bdcmsgcoll-msgv3
v4 = wa_bdcmsgcoll-msgv4
IMPORTING
msg = v_msg
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
WRITE :/ v_msg.
ENDLOOP.
ELSE.
MOVE : c_x TO wa_worklist-pgi_flag.
READ TABLE tt_epit INTO wa_epit WITH KEY epi_id = wa_worklist-epi_id epi_sr = wa_worklist-epi_sr.
IF sy-subrc EQ 0.
MODIFY tt_epit FROM wa_worklist TRANSPORTING pgi_flag WHERE epi_id = wa_worklist-epi_id AND epi_sr = wa_worklist-epi_sr.
ELSE.
APPEND wa_worklist TO tt_epit.
ENDIF.
wa_epit-pgi_flag = c_x.
MODIFY tt_epit FROM wa_epit TRANSPORTING pgi_flag WHERE epi_id = wa_worklist-epi_id AND del_no = wa_created-document_numb .
UPDATE zsd_dt_epit SET pgi_flag = 'X' WHERE epi_id = wa_worklist-epi_id AND del_no = wa_created-document_numb .
IF sy-subrc EQ 0.
ENDIF.
ENDIF.HI,
Please refer this
To perform Post goods issue
PERFORM OPEN_GROUP.
PERFORM BDC_DYNPRO USING 'SAPMV50A' '4004'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LIKP-VBELN'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=WABU_T'.
PERFORM BDC_FIELD USING 'LIKP-VBELN' DELIVERY.
'84000064'.
PERFORM BDC_TRANSACTION USING 'VL02N'.
PERFORM CLOSE_GROUP.
CLEAR : DELIVERY,
T_BSITEM,
T_BSICTL.
ENDIF.
ENDFORM. " DELIVERY -
Background job fails for BDC profile creation and role assignment
Hi Experts,
I have created a BDC Function module for Tcode 'PFCG' for profile creation and role assignment, and called this FM in my zprogram. the problem is that when i run this program in foreground it executes succesfully, but if i schedule it in background it fails throwing error in job log 'Role 'Z...' does not contain any active authorizations'. But i have created one more program to create authorization objects which runs before this zprogram.I have also checked the authorization object in 'RSECADMIN', it reflects active. I dont understand whats happening exactly when it runs background.
Below is the process of job
1. ZMIS_AUTH_OBJECT_CREATE
Variant : auth-create
2. ZMIS_AUTH_ASSIGN_TO_ROLE
Variant : auth-assign
The problem is in second program, runs in foreground but fails in background.
Code which i have written in my second program
***BDC for Profile creation and assignment to Roles
CALL FUNCTION 'ZROLE'
EXPORTING
ctu = 'X'
mode = p_mode
UPDATE = 'L'
* GROUP =
* USER =
* KEEP =
* HOLDDATE =
nodata = '/'
agr_name_neu_001 = wa_role-role_name
text_002 = wa_role-desc
text_003 = wa_role-desc
text_004 = wa_role-desc
value_01_005 = 'T-ML330881'
h_fval_low_01_006 = wa_role-auth
profn_007 = lv_profile
ptext_008 = lv_text1
* IMPORTING
* SUBRC =
TABLES
messtab = temp_message.
***Generation of Profile created
CALL FUNCTION 'PRGN_AUTO_GENERATE_PROFILE_NEW'
EXPORTING
activity_group = wa_role-role_name
* PROFILE_NAME =
* PROFILE_TEXT =
no_dialog = ' '
rebuild_auth_data = ''
org_levels_with_star = ' '
fill_empty_fields_with_star = 'X'
template = ' '
check_profgen_tables = 'X'
generate_profile = 'X'
authority_check_pfcg = 'X'
EXCEPTIONS
activity_group_does_not_exist = 1
activity_group_enqueued = 2
profile_name_exists = 3
profile_not_in_namespace = 4
no_auth_for_prof_creation = 5
no_auth_for_role_change = 6
no_auth_for_auth_maint = 7
no_auth_for_gen = 8
no_auths = 9
open_auths = 10
too_many_auths = 11
profgen_tables_not_updated = 12
error_when_generating_profile = 13
OTHERS = 14 .
Experts please help me out its very urgent. your help is appreciated and rewarded. Thanking you in advance.
Regards,
ChetanHi Praveen,
Yeah definately, my requirement is that I have to access of some BI reports to certain users, so contract data will be downlaoded from ECC on application server, need to read that file from application server and for the each contract i ahould create a authorization object, role creation and assigning of role to the user and profile generation and activation.
To achieve this i have written two programs
1) ZMIS_AUTH_OBJECT_CREATE- This program will create the Authorization Object using BDC and Role creation Using the BAPI
"" Creation of Authorization Object
CALL FUNCTION 'ZAUTHOBJ'
EXPORTING
ctu = 'X'
mode = p_mode
UPDATE = 'L'
* GROUP =
* USER =
* KEEP =
* HOLDDATE =
nodata = '/'
g_authname_001 = 'ZDUMMY_MIS'
g_targetauth_002 = wa_tab-auth
g_authtxt_003 = wa_tab-short_desc
g_authtxtmd_004 = wa_tab-med_desc
marked_04_005 = 'X'
g_authtxt_006 = wa_tab-short_desc
g_authtxtmd_007 = wa_tab-med_desc
tctiobjnm_04_008 = 'ZBUS_UNIT'
g_authtxt_009 = wa_tab-short_desc
g_authtxtmd_010 = wa_tab-med_desc
marked_05_011 = ''
opt_01_012 = 'EQ'
low_01_013 = wa_tab-bu
g_authtxt_014 = wa_tab-short_desc
g_authtxtmd_015 = wa_tab-med_desc
marked_04_016 = 'X'
g_authtxt_017 = wa_tab-short_desc
g_authtxtmd_018 = wa_tab-med_desc
tctiobjnm_04_019 = 'ZCONTRCT'
g_authtxt_020 = wa_tab-short_desc
g_authtxtmd_021 = wa_tab-med_desc
marked_05_022 = ''
opt_01_023 = 'EQ'
low_01_024 = lv_contract
g_authtxt_025 = wa_tab-short_desc
g_authtxtmd_026 = wa_tab-med_desc
g_authtxt_027 = wa_tab-short_desc
g_authtxtmd_028 = wa_tab-med_desc
g_authname_029 = wa_tab-auth
* IMPORTING
* SUBRC =
TABLES
messtab = temp_message.
"" Creation of role
LOOP AT it_role INTO wa_role.
CLEAR wa_text.
wa_text-text = wa_role-desc.
wa_text-langu = 'E'.
APPEND wa_text TO it_text.
wa_jobrole-agr_name = wa_role-role_name.
wa_parentrole-agr_name = 'ZM_CT_DUMMY_MIS'.
wa_method-usmethod = 'CHANGE'.
CALL FUNCTION 'ZBAPI_JOBROLE_CLONE'
EXPORTING
jobrole = wa_jobrole
parent = wa_parentrole
method = wa_method
TABLES
* RETURN =
shorttext = it_text
* LONGTEXT =
* MENU_NODES =
* MENU_TEXTS =.
ENDLOOP.
2) ZMIS_AUTH_ASSIGN_TO_ROLE - This program will generate the profile created assign it to the role.
""*BDC for Profile creation and assignment to Roles
CALL FUNCTION 'ZROLE'
EXPORTING
ctu = 'X'
mode = p_mode
UPDATE = 'L'
* GROUP =
* USER =
* KEEP =
* HOLDDATE =
nodata = '/'
agr_name_neu_001 = wa_role-role_name
text_002 = wa_role-desc
text_003 = wa_role-desc
text_004 = wa_role-desc
value_01_005 = 'T-ML330881'
h_fval_low_01_006 = wa_role-auth
profn_007 = lv_profile
ptext_008 = lv_text1
* IMPORTING
* SUBRC =
TABLES
messtab = temp_message .
COMMIT WORK AND WAIT.
""*Generation of Profile created
LOOP AT it_role INTO wa_role.
CALL FUNCTION 'PRGN_AUTO_GENERATE_PROFILE_NEW'
EXPORTING
activity_group = wa_role-role_name
* PROFILE_NAME =
* PROFILE_TEXT =
no_dialog = ' '
rebuild_auth_data = ''
org_levels_with_star = ' '
fill_empty_fields_with_star = 'X'
template = ' '
check_profgen_tables = 'X'
generate_profile = 'X'
authority_check_pfcg = 'X'
EXCEPTIONS
activity_group_does_not_exist = 1
activity_group_enqueued = 2
profile_name_exists = 3
profile_not_in_namespace = 4
no_auth_for_prof_creation = 5
no_auth_for_role_change = 6
no_auth_for_auth_maint = 7
no_auth_for_gen = 8
no_auths = 9
open_auths = 10
too_many_auths = 11
profgen_tables_not_updated = 12
error_when_generating_profile = 13
OTHERS = 14
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDLOOP.
For creating authorization objects, role & profile i have created one dummy auth, dummy role & dummy profile respectively.
i have created dummy objects to copy the roles from dummy object and assign the same to new Auth obj, role & profile.
Let me know what needs to be done. because these both the programs run perfectly in foreground, but fails in background.
Regards,
Chetan -
Material Creation Using BDCs.
Hi all,
I have developed a program for Material Creation using BDC.
Material is Being created and that is working well and good.Here i have a Requirement to update the Newly creted material in Ztable.So when i use call transaction mathod,i have written code for updation under the line CALL TRANSACTION.where in iam getting newly creatde material from MARA table,and so it is working perfectly fine..
But our requirement should be sessions method,so when i use sessions method and exeute the program..we face the problem of updation.
the piece of code for updation is updating previously created material.
Literally speaking only the sessions are created ,when the program is executed,material is not created when program is run.Material is only created when the sessions are processed using SM35,
So how should i do here,where should be the updation code written and where will we get the newly created material in sessions method..
Pls Help me in solving this problemhai priyanaka it might be due to configuration problem
bcos manulay also ur gettign this , so just consult ur MM consultant for soem setting
regards
afzal -
TSW-Ticket Creation & Actualization using BDC
Hi,
I am using BDC for Ticket creation using transaction O4TEN.
After execution of this BDC, Ticket get created and Saved but it does not actualize ticket even if we click actualize button using BDC.
In real scenario, after ticket creation the status and substatus values should be "C"(Planned) and "6" (Complete) but in this case the status and substatus values are "B"(Checked) and "4"(Positive).
If we create ticket directly using O4TEN then it actualizes ticket properly.
I am not able to find out why BDC is not actualizing tickets.
Any idea?
Regards,
UmeshHi,
I tried BDC for SAVE but still not getting Ticket Key.
So now I am using FM: OIJ_EL_A_TICKETS_MAINTAIN_N.
It creates ticket but in Ticket Item table Ticket item field is blank. Purpose is blank.
Also OIJ_EL_TKT_I_O1 and OIJ_EL_TKT_I_O2 are not populated.
In header I am passing: TICKET_PURPOSE, TICKET_TYPE, UPDKZ = 'I'
and In item I am passing: NOMNR, NOMTK, NOMIT, MENGE, MEINS, TIME_ST_LOAD_STA, TIME_ST_LOAD_END, BUDAT UPDKZ = 'I'.
am I missing something?
Code is as follows:
Replace BDC with function module: OIJ_EL_A_TICKETS_MAINTAIN_N
1) Call FM: OIJ_EL_A_TICKETS_MAINTAIN_N
2) Call FM: ENQUEUE_E_OIJTKT
3) Call FM: OIJB_GENERATE_DOCUMENTS_N
4) Call FM: DEQUEUE_E_OIJTKT
DATA: ls_tkt_h TYPE roij_el_ticket_hvb,
ls_tkt_i TYPE roij_el_ticket_i_io,
ls_oijnomi TYPE oijnomi,
ls_roijnomiio TYPE roijnomiio,
ls_ticket_item TYPE oij_el_ticket_i,
ls_ticket_item_o1 TYPE oij_el_tkt_i_o1,
ls_ticket_item_o2 TYPE oij_el_tkt_i_o2,
ls_ticket_header_pv TYPE oij_el_ticket_h,
ls_ticket_header TYPE oij_el_ticket_h,
ls_tkt_i_o1 TYPE oij_el_tkt_i_o1,
ls_tkt_i_o2 TYPE oij_el_tkt_i_o2.
DATA: lv_time TYPE sy-uzeit.
DATA: it_tkt_i TYPE roij_el_ticket_i_io_t,
it_tkt_h_evt TYPE roijte_t,
it_tkt_h_evt_txt TYPE oij_txt,
it_tkt_i_evt TYPE roijte_t,
it_tkt_i_evt_txt TYPE oij_txt,
it_tkt_i_o1 TYPE roij_el_tkt_i_o1_t,
it_tkt_i_o2 TYPE roij_el_tkt_i_o2_t,
it_tkt_err_log TYPE oij_el_err_log_tt,
it_tkt_doc_flow TYPE roij_el_doc_flow_io_t,
it_return TYPE bapiret2_t,
it_oijnomh TYPE oijnomh_t,
it_oijnomi TYPE oijnomi_t,
it_ticket_item TYPE STANDARD TABLE OF oij_el_ticket_i,
it_ticket_item_o1 TYPE STANDARD TABLE OF oij_el_tkt_i_o1,
it_ticket_item_o2 TYPE STANDARD TABLE OF oij_el_tkt_i_o2.
ls_tkt_h-ticket_purpose = '1'.
ls_tkt_h-ticket_type = lv_ticket_type.
IF lv_ticket_type EQ c_yp2.
If Ticket type is YP2 then
ls_tkt_h-yy_mct_cat = fp_mct_cat.
ENDIF.
ls_tkt_h-yy_pat_alc = lv_alloc_rule.
ls_tkt_h-updkz = 'I'.
ls_tkt_i-nomnr = fp_s_tc1-nomnr.
ls_tkt_i-nomtk = fp_s_tc1-nomtk.
ls_tkt_i-nomit = fp_s_tc1-nomit.
ls_tkt_i-menge = lv_menge.
ls_tkt_i-meins = fp_s_tc1-units.
CLEAR ls_oijnomi.
SELECT SINGLE * FROM oijnomi INTO ls_oijnomi
WHERE nomtk = fp_s_tc1-nomtk
AND nomit = fp_s_tc1-nomit.
IF sy-subrc EQ 0.
MOVE-CORRESPONDING ls_oijnomi TO ls_roijnomiio.
ENDIF.
PERFORM get_timestamp USING fp_sdate
lv_time
ls_roijnomiio
CHANGING ls_tkt_i-time_st_load_sta.
PERFORM get_timestamp USING fp_edate
lv_time
ls_roijnomiio
CHANGING ls_tkt_i-time_st_load_end.
CONCATENATE lv_budat(4) lv_budat5(2) lv_budat8(2) INTO ls_tkt_i-budat.
ls_tkt_i-updkz = 'I'.
APPEND ls_tkt_i TO it_tkt_i.
CALL FUNCTION 'OIJ_EL_A_TICKETS_MAINTAIN_N'
EXPORTING
is_tkt_header = ls_tkt_h
IT_HEADER_EVT =
IT_HEADER_EVT_TXT =
it_items = it_tkt_i
IT_ITM_EVT =
IT_ITM_EVT_TXT =
IT_ITM_O1 =
IT_ITM_O2 =
IT_TKT_ERROR_LOG =
it_tkt_doc_flow = it_tkt_doc_flow
iv_commit = 'X'
IV_LOCK =
IV_ADD_TO_LOG =
IV_CALL_TO_OUTPUT =
IMPORTING
es_tkt_header = ls_tkt_h
ET_HEADER_EVT = it_tkt_h_evt
ET_HEADER_EVT_TXT = it_tkt_h_evt_txt
et_items = it_tkt_i
ET_ITM_EVT = it_tkt_i_evt
ET_ITM_EVT_TXT = it_tkt_i_evt_txt
et_itm_o1 = it_tkt_i_o1
et_itm_o2 = it_tkt_i_o2
ET_TKT_ERROR_LOG = it_tkt_err_log
et_tkt_doc_flow = it_tkt_doc_flow
et_return = it_return
EXCEPTIONS
ticket_locked = 1
OTHERS = 2
IF sy-subrc NE 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
COMMIT WORK AND WAIT.
Lock the ticket
There is no check neccessary if the ticket has already
been locked by an other user because it has just been
created.
CALL FUNCTION 'ENQUEUE_E_OIJTKT'
EXPORTING
mode_oij_el_ticket_h = 'E'
mandt = sy-mandt
ticket_key = ls_tkt_h-ticket_key
ticket_version = ls_tkt_h-ticket_version
ticket_purpose = ls_tkt_h-ticket_purpose
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
CALL FUNCTION 'OIJB_GET_NOMINATION_DATA'
EXPORTING
ACTIVITY =
is_ticket_header = ls_tkt_h
is_ticket_item = ls_tkt_i
IV_ADD_TO_LOG =
CHANGING
ct_oijnomh = it_oijnomh
ct_oijnomi = it_oijnomi
RETURN =
EXCEPTIONS
ticket_data_error = 1
no_nomination_selected = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ls_ticket_header = ls_tkt_h.
LOOP AT it_tkt_i INTO ls_tkt_i.
MOVE-CORRESPONDING ls_tkt_i TO ls_ticket_item.
APPEND ls_ticket_item TO it_ticket_item.
ENDLOOP.
LOOP AT it_tkt_i_o1 INTO ls_tkt_i_o1.
MOVE-CORRESPONDING ls_tkt_i_o1 TO ls_ticket_item_o1.
APPEND ls_ticket_item_o1 TO it_ticket_item_o1.
ENDLOOP.
LOOP AT it_tkt_i_o2 INTO ls_tkt_i_o2.
MOVE-CORRESPONDING ls_tkt_i_o2 TO ls_ticket_item_o2.
APPEND ls_ticket_item_o2 TO it_ticket_item_o2.
ENDLOOP.
CALL FUNCTION 'OIJB_GENERATE_DOCUMENTS_N'
EXPORTING
i_ticket_header = ls_ticket_header
i_ticket_header_pv = ls_ticket_header_pv
I_CLOSE_SHIPMENT = ' '
TABLES
t_ticket_item = it_ticket_item
t_ticket_item_o1 = it_ticket_item_o1
t_ticket_item_o2 = it_ticket_item_o2
T_TICKET_ITEM_PV =
T_TICKET_ITEM_O1_PV =
T_TICKET_ITEM_O2_PV =
t_oijnomh = it_oijnomh
t_oijnomi = it_oijnomi
T_DOC_FLOW =
T_ERR_LOG =
T_REVERSAL_DOCS =
T_ORIGINAL_DOCS =
T_TICKET_SUBITEM =
EXCEPTIONS
error_during_cip_process = 1
error_during_checks = 2
nomination_lock_error = 3
nomination_read_error = 4
cip_process_read_error = 5
OTHERS = 6
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
COMMIT WORK AND WAIT.
ENDIF. -
Billng document creation using bdc
hi experts,
I've been using bapi for sales order and outbound delivery creation. But for billing document i'm using BDC. it's simpler. The creation of sales order and outbound delivery has no problem. The problem is upon creation of the billing document, it only creates the last entry in the item level. Example, if item has 10,20, and 30; it will only create item 30 in the billing document level. But no problem with the sales order and outdel. What could i be missing here?
Thank you in advance!Hi,
Im actually not very particular on where in the bdc code the line items are being processed. the only variable that I see here is the outbound del number which is g_odnum. Here is the BDC code.
f_bdc_dynpro 'SAPMV60A' '0102'.
f_bdc_field 'BDC_CURSOR' 'KOMFK-VBELN(01)'.
f_bdc_field 'BDC_OKCODE' '/00'.
f_bdc_field 'KOMFK-VBELN(01)' g_odnum.
f_bdc_dynpro 'SAPMV60A' '0104'.
f_bdc_field 'BDC_CURSOR' 'VBRK-FKART'.
f_bdc_field 'BDC_OKCODE' '=SICH'.
f_bdc_transaction 'VF01'.
Can you help me identify where it is in this BDC code?
Thanks for you help! -
I need to know , how to handle partner profile using BDC.
hi all ,
i need to know how to handle the Partner Profile using BDC, i need the basics behind if any one address regarding this it ill be very helpfull for me. i need a detail description for the above.
Thanks a Lot in Advance........
Thanks
senmaar.I need the basic behind , need to know how its works..... And i need to know could you give me a simple scenario so that i can easily understand.
Could anyone Describe the Basics about that.......
Thanks in Advance
Regards ,
Senthil Kumar -
Not sure if this is the right forum?
Getting this error (copied from Event Viewer) on a Windows 8.1 Pro client - an event ID of 1000, every time at the start of profile creation when logging in with a domain account. So explorer.exe crashes because of "twinui.appcore.dll" and profile
creation is taking a very long time (about 17 minutes).
Then after being stuck during "Almost ready" screen we are getting a Start-button that is stuck (non-clickable) (and also arrows on the metro-screen icons). Restarting explorer.exe manually helps to get a functional Start-button again.
Tried using a roaming profile and without using a roaming profile (Group Policy setting to always keep profiles local). That does not seem to matter.
Naam van toepassing met fout: Explorer.EXE, versie: 6.3.9600.17667, tijdstempel: 0x54c6f7c2
Naam van module met fout: twinui.appcore.dll, versie: 6.3.9600.17415, tijdstempel: 0x54503801
Uitzonderingscode: 0x80270233
Foutmarge: 0x000000000008cb57
Id van proces met fout: 0xf28
Starttijd van toepassing met fout: 0x01d05bf587567d80
Pad naar toepassing met fout: C:\Windows\Explorer.EXE
Pad naar module met fout: C:\Windows\System32\twinui.appcore.dll
Rapport-id: cf9c3ec8-c7e8-11e4-8262-0019bbd6f620
Volledige pakketnaam met fout:
Relatieve toepassings-id van pakket met fout:
Using Samba 3.6.25 with an LDAP back-end. Installed all updates for Windows 8.1 Pro client.
Thanks in advance for any advice.Pasting the crash dump analysis using WinDbg (x64):
Microsoft (R) Windows Debugger Version 6.3.9600.17298 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\LocalDumps\explorer.exe.824.dmp]
User Mini Dump File with Full Memory: Only application data is available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred srv*DownstreamStore*http://msdl.microsoft.com/download/symbols
Symbol search path is: srv*DownstreamStore*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Version 9600 MP (2 procs) Free x64
Product: WinNt, suite: SingleUserTS
Built by: 6.3.9600.17031 (winblue_gdr.140221-1952)
Machine Name:
Debug session time: Thu Mar 12 11:53:12.000 2015 (UTC + 1:00)
System Uptime: 0 days 21:10:37.682
Process Uptime: 0 days 0:01:05.000
Loading unloaded module list
This dump file has an exception of interest stored in it.
The stored exception information can be accessed via .ecxr.
(338.f94): Unknown exception - code 80270233 (first/second chance not available)
kernel32!RaiseFailFastException+0xae:
00007ffe`cb2faabe e8b1000000 call kernel32!SignalStartWerSvc (00007ffe`cb2fab74)
0:018> !analyze -v
* Exception Analysis
*** ERROR: Symbol file could not be found. Defaulted to export symbols for sppc.dll -
FAULTING_IP:
twinui_appcore!CCriticalFailureHandler::_RaiseFailFastException+c7
00007ffe`bed7cb57 488b4d37 mov rcx,qword ptr [rbp+37h]
EXCEPTION_RECORD: ffffffffffffffff -- (.exr 0xffffffffffffffff)
ExceptionAddress: 00007ffebed7cb57 (twinui_appcore!CCriticalFailureHandler::_RaiseFailFastException+0x00000000000000c7)
ExceptionCode: 80270233
ExceptionFlags: 00000001
NumberParameters: 1
Parameter[0]: ffffffff80070005
CONTEXT: 0000000000000000 -- (.cxr 0x0;r)
rax=000000000a14f560 rbx=000000000a14fa70 rcx=000000000a14f560
rdx=0000000000000000 rsi=0000000000000001 rdi=000000000a14f560
rip=00007ffecb2faabe rsp=000000000a14f480 rbp=000000000a14fad9
r8=0000000000000000 r9=0000000000000006 r10=0000000000000000
r11=00007ffecb544dd7 r12=00007ffebed00090 r13=0000000008234160
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl zr na po nc
cs=0033 ss=002b ds=002b es=002b fs=0053 gs=002b efl=00000244
kernel32!RaiseFailFastException+0xae:
00007ffe`cb2faabe e8b1000000 call kernel32!SignalStartWerSvc (00007ffe`cb2fab74)
PROCESS_NAME: explorer.exe
ERROR_CODE: (NTSTATUS) 0x80270233 - <Unable to get error code text>
EXCEPTION_CODE: (HRESULT) 0x80270233 (2150040115) - <Unable to get error code text>
EXCEPTION_PARAMETER1: ffffffff80070005
NTGLOBALFLAG: 2000100
APPLICATION_VERIFIER_FLAGS: 48004
APP: explorer.exe
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) amd64fre
FAULTING_THREAD: 0000000000000f94
BUGCHECK_STR: APPLICATION_FAULT_SHELL_COMPONENT_STARTUP_FAILURE_ERROR_CODE_ffffffff80270233
PRIMARY_PROBLEM_CLASS: SHELL_COMPONENT_STARTUP_FAILURE_ERROR_CODE_ffffffff80270233
DEFAULT_BUCKET_ID: SHELL_COMPONENT_STARTUP_FAILURE_ERROR_CODE_ffffffff80270233
LAST_CONTROL_TRANSFER: from 00007ffebed7cb57 to 00007ffecb2faabe
STACK_TEXT:
00000000`0a14f480 00007ffe`bed7cb57 : 00000000`80070005 00000000`00000004 ffffffff`80070005 00000000`00000000 : kernel32!RaiseFailFastException+0xae
00000000`0a14fa50 00007ffe`bed7c8c2 : 00000000`00000a9c 00000000`0a14fc20 00000000`000003a8 00000000`000003a8 : twinui_appcore!CCriticalFailureHandler::_RaiseFailFastException+0xc7
00000000`0a14fb40 00007ffe`bed8b349 : 00000000`00000000 00007ffe`bed00090 00000000`000003a8 00000000`00000004 : twinui_appcore!CCriticalFailureHandler::HandleFailure+0xba
00000000`0a14fb90 00007ffe`bed19d8b : 00000000`08242340 00000000`0a14fc00 00000000`00000000 00007ffe`bed34838 : twinui_appcore!`Microsoft::WRL::Module<1,Microsoft::WRL::Details::DefaultModule<1> >::Create'::`2'::`dynamic atexit destructor for 'module''+0x7a79
00000000`0a14fbd0 00007ffe`c5055bf1 : 00000000`80070005 00000000`08242340 00000000`00000000 00007ffe`bed19d30 : twinui_appcore!CProcessLifetimeManager::PerformDelayedInitialization+0x5b
00000000`0a14fc20 00007ffe`c5055519 : 00000000`00000000 00000000`08242340 00000000`00000000 00000000`00000034 : windows_immersiveshell_serviceprovider!CImmersiveShellController::_CreateComponents+0x536
00000000`0a14fcc0 00007ffe`c505566e : 00007ffe`00000045 00000000`00000000 00000000`082335f8 00000000`02ea60e8 : windows_immersiveshell_serviceprovider!CImmersiveShellController::_ImmersiveShellComponentsThreadProcInternal+0x17d
00000000`0a14fd50 00007ffe`b41995cd : 00007ffe`c5050000 00007ffe`c50555f0 00000000`00000000 00000000`00000000 : windows_immersiveshell_serviceprovider!CImmersiveShellController::s_ImmersiveShellComponentsThreadProc+0x7a
00000000`0a14fd80 00007ffe`cb2113d2 : 00007ffe`b4199580 00000000`00000000 00000000`00000000 00000000`00000000 : verifier!AVrfpStandardThreadFunction+0x4d
00000000`0a14fdc0 00007ffe`cb51e954 : 00007ffe`cb2113b0 00000000`00000000 00000000`00000000 00000000`00000000 : kernel32!BaseThreadInitThunk+0x22
00000000`0a14fdf0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : ntdll!RtlUserThreadStart+0x34
FOLLOWUP_IP:
twinui_appcore!CCriticalFailureHandler::HandleFailure+ba
00007ffe`bed7c8c2 488b6c2458 mov rbp,qword ptr [rsp+58h]
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: twinui_appcore!CCriticalFailureHandler::HandleFailure+ba
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: twinui_appcore
IMAGE_NAME: twinui.appcore.dll
DEBUG_FLR_IMAGE_TIMESTAMP: 54503801
STACK_COMMAND: ~18s; .ecxr ; kb
FAILURE_BUCKET_ID: SHELL_COMPONENT_STARTUP_FAILURE_ERROR_CODE_ffffffff80270233_80270233_twinui.appcore.dll!CCriticalFailureHandler::HandleFailure
BUCKET_ID: APPLICATION_FAULT_SHELL_COMPONENT_STARTUP_FAILURE_ERROR_CODE_ffffffff80270233_twinui_appcore!CCriticalFailureHandler::HandleFailure+ba
ANALYSIS_SOURCE: UM
FAILURE_ID_HASH_STRING: um:shell_component_startup_failure_error_code_ffffffff80270233_80270233_twinui.appcore.dll!ccriticalfailurehandler::handlefailure
FAILURE_ID_HASH: {bc588def-f8dc-26b8-dac8-a057fb6557c4}
Followup: MachineOwner
0:018> lmvm twinui_appcore
start end module name
00007ffe`becf0000 00007ffe`bee20000 twinui_appcore (pdb symbols) downstreamstore\twinui.appcore.pdb\310246EA4A1E4BF8A48502B727A7376B1\twinui.appcore.pdb
Loaded symbol image file: twinui.appcore.dll
Image path: C:\Windows\System32\twinui.appcore.dll
Image name: twinui.appcore.dll
Timestamp: Wed Oct 29 01:42:41 2014 (54503801)
CheckSum: 0013A0E7
ImageSize: 00130000
File version: 6.3.9600.17415
Product version: 6.3.9600.17415
File flags: 0 (Mask 3F)
File OS: 40004 NT Win32
File type: 2.0 Dll
File date: 00000000.00000000
Translations: 0409.04b0
CompanyName: Microsoft Corporation
ProductName: Microsoft® Windows® Operating System
InternalName: TWINUI.APPCORE
OriginalFilename: TWINUI.APPCORE.dll
ProductVersion: 6.3.9600.17415
FileVersion: 6.3.9600.17415 (winblue_r4.141028-1500)
FileDescription: TWINUI.APPCORE
LegalCopyright: © Microsoft Corporation. All rights reserved.
Does this make any sense to anyone? -
Creation of po with mutiple line items using BDC
Hi Gurus,
Can any body hav notes for creating po's using BDC with multiple line items in transaction ME21. I hav created po for single line item but if i tried to create multiple line items, it ll create multiple po's...
thanks in advance
arunSee the Below Logic for me22 and it is also same for me21
report zpochange.
data : i_error like bdcmsgcoll occurs 0 with header line.
data : i_bdcdata like bdcdata occurs 0 with header line.
tables : ekko, ekpo.
data :c1(10) value 'ME22',
c2(1) value ',',c3(10).
data : var1(20). " LIKE EKKO-EBELN.
data : var2 like ekko-ebeln.
data : begin of i_ekko occurs 0,
header(2),
ebeln like ekko-ebeln,
end of i_ekko.
data : begin of i_ekpo occurs 0,
item(2),
ebeln like ekpo-ebeln,
ebelp like ekpo-ebelp,
menge(10), " LIKE EKPO-MENGE,
end of i_ekpo.
data : v like ekpo-ebelp.
data: begin of itab occurs 0,
text(300),
end of itab.
parameters: p_file like ibipparms-path.
*PARAMETERS: PONUMBER LIKE EKPO-EBELN.
at selection-screen on value-request for p_file.
call function 'F4_FILENAME'
exporting
program_name = syst-cprog
dynpro_number = syst-dynnr
FIELD_NAME = ' '
importing
file_name = p_file
start-of-selection.
*SELECT EBELN FROM EKKO INTO TABLE I_EKKO WHERE EBELN = PONUMBER.
SELECT EBELN EBELP MENGE FROM EKPO INTO TABLE I_EKPO WHERE EBELN
*= PONUMBER.
perform get_data.
*LOOP AT ITAB.
WRITE :/ ITAB.
ENDLOOP.
loop at itab.
var1 = itab-text+0(1).
if var1 = 'H'.
*I_EKKO-EBELN = ITAB-TEXT.
split itab at c2 into i_ekko-header
i_ekko-ebeln.
SPLIT ITAB AT ',' INTO I_EKKO-EBELN.
" I_EKPO-EBELP
" I_EKPO-MENGE
" var1.
append i_ekko.
else.
split itab at c2 into i_ekpo-item
i_ekpo-ebeln
i_ekpo-ebelp
i_ekpo-menge.
append i_ekpo.
endif.
*var2 = i_ekpo-ebeln.
MOVE VAR1 TO I_EKPO-EBELN.
MOVE VAR1 TO I_EKKO-EBELN.
APPEND: I_EKPO.
*if not var1 is initial.
split var1 at ',' into i_ekpo-ebelp
i_ekpo-menge.
i_ekpo-ebeln = var2.
append i_ekpo.
*endif.
endloop.
loop at i_ekpo.
write :/ i_ekpo.
endloop.
loop at i_ekko.
perform fill_data. " TABLES I_EKPO.
endloop.
LOOP AT I_EKPO.
WRITE :/ I_EKPO.
ENDLOOP.
*& Form GET_DATA
text
--> p1 text
<-- p2 text
*LOOP AT I_ERROR.
WRITE :/ I_ERROR.
ENDLOOP.
form get_data.
call function 'WS_UPLOAD'
exporting
codepage = ' '
filename = p_file
filetype = 'ASC'
headlen = ' '
line_exit = ' '
trunclen = ' '
user_form = ' '
user_prog = ' '
dat_d_format = ' '
IMPORTING
FILELENGTH =
tables
data_tab = itab
exceptions
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
others = 10
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endform. " GET_DATA
*& Form FILL_DATA
text
-->P_I_EKPO text
form fill_data. " tables i_ekpo .
perform bdcscreen using 'SAPMM06E' '0105'.
perform bdcfield using 'RM06E-BSTNR' i_ekko-ebeln.
perform bdcfield using 'BDC_OKCODE' '/00'.
loop at i_ekpo where ebeln = i_ekko-ebeln.
V = I_EKPO-EBELP.
perform bdcscreen using 'SAPMM06E' 0120.
perform bdcfield using 'BDC_CURSOR' 'RM06E-EBELP'.
perform bdcfield using 'RM06E-EBELP' i_ekpo-ebelp.
perform bdcfield using 'BDC_OKCODE' '/00'.
perform bdcscreen using 'SAPMM06E' 0120.
perform bdcfield using 'BDC_CURSOR' 'EKPO-MENGE(01)'.
perform bdcfield using 'RM06E-EBELP' i_ekpo-ebelp.
perform bdcfield using 'EKPO-MENGE(01)' i_ekpo-menge.
perform bdcfield using 'BDC_OKCODE' '/00'.
*PERFORM BDCSCREEN USING 'SAPMM06E' 0120.
*PERFORM BDCFIELD USING 'BDC_CURSOR' 'RMO6E-EBELP'.
*CLEAR V.
endloop.
perform bdcfield using 'BDC_OKCODE' '=BU'.
call transaction c1 using i_bdcdata mode 'A'
messages into i_error.
refresh i_bdcdata.
endform. " FILL_DATA
*& Form BDCSCREEN
text
-->P_0140 text
-->P_0120 text
form bdcscreen using p_program p_screen.
i_bdcdata-program = p_program.
i_bdcdata-dynpro = p_screen.
i_bdcdata-dynbegin = 'X'.
append i_bdcdata.
clear i_bdcdata.
endform. " BDCSCREEN
*& Form BDCFIELD
text
-->P_0145 text
-->P_I_EKPO_EBELN text
form bdcfield using fnam fval.
i_bdcdata-fnam = fnam.
i_bdcdata-fval = fval.
append i_bdcdata.
clear i_bdcdata.
endform. " BDCFIELD
Reward Points if it is helpful
Thanks
Seshu -
Contract creation using BDC wherein Net order price is Zero
Hi,
Please let me know the solution to the above problem.
I am trying to create a quantity contract using BDC but the Net Order Price is coming as Zero even though the condition type PB00 is maintained properly in the info record with some net order price which is not equal to zero.
Please let me know asap as this is a critical issue. The same problem is not happening if i try an create a contract manually.Hi,
Please let me know the solution to the above problem.
I am trying to create a quantity contract using BDC but the Net Order Price is coming as Zero even though the condition type PB00 is maintained properly in the info record with some net order price which is not equal to zero.
Please let me know asap as this is a critical issue. The same problem is not happening if i try an create a contract manually. -
Office 2013 latest update broke new profile creation on all network computers
Hi,
Reporting a bug here!
Setup details:
We're using samba 3 as our backend and all workstation are Windows 7 Pro x64.
Office 2013 Home and Business Retail (en-us) Click 2 Run version
Context:
Deployed to the whole network of one of our client using the Office Deployement Tool.
We update their base update (no updates) to the latest update 15.0.4569.1508
Everything was working alright after initial Office 2013 installation with no updates. After updating the all the PCs to the latest version as of 31/03/2014, the user profile creation broke for newly created user.
Symptoms and causes:
Trying to log on as a new user on the machine would give the following error on Logon before automatically loging off because it cannot copy the following file to the new user profile:
D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_00.sqm
D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm
D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_02.sqm
The Bici folder has Read and Execute permissions for everyone but the _XX.sqm files inside only have permissions (Full Control) for SYSTEM and Administrators and LOCAL SERVICE with the all permissions EXCEPT:
- FULL CONTROL
- TRAVERSE FOLDERS/EXECUTE FILES
- CHANGE PERMISSIONS
- TAKE OWNERSHIP
Solution:
I gave "everyone" Read and Execute permission on those files and the new user could log in and his profile got created alright.
The files with broken permissions time stamp shows they've been modified during the Office 2013 update and Bici seems to be a OneDrive related service. This bug should get fixed ASAP.
Event log error:
Windows cannot copy file \\?\D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm to location \\?\D:\Users\TEMP\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-User Profiles General" Guid="{DB00DFB6-29F9-4A9C-9B3B-1F4F9E7D9770}" />
<EventID>1509</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-04-04T07:15:51.922563800Z" />
<EventRecordID>9615</EventRecordID>
<Correlation />
<Execution ProcessID="940" ThreadID="1764" />
<Channel>Application</Channel>
<Computer>F00241D1DAAAD</Computer>
<Security UserID="S-1-5-21-1582357797-4105456612-768596941-1206" />
</System>
- <EventData Name="EVENT_COPYERROR">
<Data Name="Source">\\?\D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm</Data>
<Data Name="Target">\\?\D:\Users\TEMP\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm</Data>
<Data Name="Error">Access is denied.</Data>
</EventData>
</Event>Hi dude,
I appreciate that your sharing your experience and solution here. And, I would report it through our internal channel. Thanks again.
Tony Chen
TechNet Community Support -
Creation of role using T-code PFCG in R/3
Hi Experts,
I have created a Role using PFCG inorder to give acess only to three T-codes(PZ09. PZ80,PZ88).
so i have created a role intially using PFCG and incorporated PZ09 tcode in it and assigend the Role to users in R/3. it is displaying the TCode(PZ09) in Portal.
Now again i have added PZ80 & PZ88 to the same Role in R/3, but now i am getting an error:
Infotype 0000 does not exist.
but whereas when i assign SAP_ALL they(PZ88 & PZ 80) are working fine.
Is they anything i can do so that i can avoid assigning SAP_ALL Profile to the users and eliminate the Error "Infotype 0000 does not exist.
Thanks Inadvance,
Regards,
SivaHi,
Thanks for your reply,
Creation of role using T-code PFCG in R/3
The above link has solved my issue, Thank you!
Regards,
Siva -
Creating Sales order texts while using BDC session method is not working
Hi All,
I have an existing program which creates sales order using BDC session method.( Actual program uses BAPI to create sales order and in case if any error occurs during creation of sales order BDC session is generated so that user can process it later and i am facing issues in this part of code where it uses BDC)
I wanted to modify this BDC sesion to update the sales order text also. I tried recording VA01 for creationg sales order text unfortunatly it is not capturing the data i am entering in the text fields.
Please suggest if there is any way to create sales order using BDC.
Regards
SheebaHi Madhu,
'=TP_CREATE' is the OK code i am getting for creating TEXTS. But the text entered are not captured in BDC.
Part of BDC program generated for cretaing sales order texts.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=%_GC 128 22'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=%_GC 128 22'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=SICH'.
Regards,
Sheeba
Maybe you are looking for
-
Best upgrade for mini to improve live broadcast streaming?
I am using a Mac Mini for live broadcast streaming. I am using Wirecast for the encoding. I am encoding the stream in Flash format and I'm simultaneously recording to hard drive in QT h.264 format. This maxes out my 2 GHz Core 2 Duo mini with 4GB RAM
-
Backup Failed (error -24988 and -903)
Hello All, MaxDb 7.6.03.03 on Windows 2003 Server (32 bit). I've an instance that run fine since several years now, which is backed up using a simple script: @echo off echo ============================= >> d:maxdbscripts ackup.log echo. | date | find
-
Can I still download the free trial of photoshop cs5?
I have a computer with Windows Vista Business and I would like to install the free trial of photoshop CC but that doesn't work because it's Vista. Is photoshop cs5 or 6 still available because that does work on Vista.
-
Macbook white won't charge, and problem with powering on.
Hi, I am helping a friend with his Macbook 13inch white model. A macbook3,1 model. The battery won't charge and the Macbook itself won't usually power on, the only way to power it on is by pressing the power button and holding it down, then put in th
-
Hardware Overview: Hardware Overview: Hi I have 2011 Macbook pro 8.1Lion with i5 Dual Core processor 2.4GHZ I would like to import movies from my Panasonic HD Camcorder I have been trying to download i movies from iTunes but tells me it is not compa