Profile creation problem on n85

i have the same problem;can't create new profile on my n85 (v30.101) "please help me!" =]Does Nokia have any solution for this problem?

jjfbravo,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

User profile creation problem for windows 7 clients with eap-fast

Hi All,
In our clients locations we implemented eap-fast authentication with domain integration in ACS for wlan users.Every thing working fine.We are facing problem with windows 7 laptops, in which client utility is not available to configure the user profiles.
In xp laptops client utility softwares are available with all makes, but with win 7 utilitys are not coming by default......
So what are options and available sourses for creating user profile with EAP-FAST in windows 7 laptops.
Any free univarsal client utility is available for windows 7 laptop.
Please guide me..............
-Subhash

Windows 7 should be able to do EAP-fast by default. If not you could download the latest Anyconnect client that also has the Cisco wireless supplicant in it.
HTH,
Steve
Sent from Cisco Technical Support iPad App

Profile creation problem.

Have just done a clean install of Windows XP. I am trying to install Firedox 3.6.13 but when I try to create a profile I get the following error message:
Profile couldn't be created. Probably the chosen folder isn't writable.
[Exception... "Component returned failure code: 0x80520008 (NS_ERROR_FILE_ALREADY_EXISTS) [nsIToolkitProfileService.createProfile]" nsresult: "0x80520008 (NS_ERROR_FILE_ALREADY_EXISTS)" location: "JS frame :: chrome://mozapps/content/profile/createProfileWizard.js :: onFinish :: line 233" data: no]
I have uninstalled and reinstalled Firefox but I keep getting the same error message. Have searched Forum and Googled for an answer but have drawn a blank. Help!

jjfbravo,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Office 2013 latest update broke new profile creation on all network computers

Hi,
Reporting a bug here!
Setup details:
We're using samba 3 as our backend and all workstation are Windows 7 Pro x64.
Office 2013 Home and Business Retail (en-us) Click 2 Run version
Context:
Deployed to the whole network of one of our client using the Office Deployement Tool.
We update their base update (no updates) to the latest update 15.0.4569.1508
Everything was working alright after initial Office 2013 installation with no updates. After updating the all the PCs to the latest version as of 31/03/2014, the user profile creation broke for newly created user.
Symptoms and causes:
Trying to log on as a new user on the machine would give the following error on Logon before automatically loging off because it cannot copy the following file to the new user profile:
D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_00.sqm
D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm
D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_02.sqm
The Bici folder has Read and Execute permissions for everyone but the _XX.sqm files inside only have permissions (Full Control) for SYSTEM and Administrators and LOCAL SERVICE with the all permissions EXCEPT:
- FULL CONTROL
- TRAVERSE FOLDERS/EXECUTE FILES
- CHANGE PERMISSIONS
- TAKE OWNERSHIP
Solution:
I gave "everyone" Read and Execute permission on those files and the new user could log in and his profile got created alright.
The files with broken permissions time stamp shows they've been modified during the Office 2013 update and Bici seems to be a OneDrive related service. This bug should get fixed ASAP.
Event log error:
Windows cannot copy file \\?\D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm to location \\?\D:\Users\TEMP\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-User Profiles General" Guid="{DB00DFB6-29F9-4A9C-9B3B-1F4F9E7D9770}" />
<EventID>1509</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-04-04T07:15:51.922563800Z" />
<EventRecordID>9615</EventRecordID>
<Correlation />
<Execution ProcessID="940" ThreadID="1764" />
<Channel>Application</Channel>
<Computer>F00241D1DAAAD</Computer>
<Security UserID="S-1-5-21-1582357797-4105456612-768596941-1206" />
</System>
- <EventData Name="EVENT_COPYERROR">
<Data Name="Source">\\?\D:\Users\Default\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm</Data>
<Data Name="Target">\\?\D:\Users\TEMP\AppData\Local\Microsoft\Windows Live\Bici\_01.sqm</Data>
<Data Name="Error">Access is denied.</Data>
</EventData>
</Event>

Hi dude,
I appreciate that your sharing your experience and solution here. And, I would report it through our internal channel. Thanks again.
Tony Chen
TechNet Community Support

Background job fails for BDC profile creation and role assignment

Hi Experts,
I have created a BDC Function module for Tcode 'PFCG' for profile creation and role assignment, and called this FM in my zprogram. the problem is that when i run this program in foreground it executes succesfully, but if i schedule it in background it fails throwing error in job log 'Role 'Z...' does not contain any active authorizations'. But i have created one more program to create authorization objects which runs before this zprogram.I have also checked the authorization object in 'RSECADMIN', it reflects active. I dont understand whats happening exactly when it runs background.
Below is the process of job
   1. ZMIS_AUTH_OBJECT_CREATE
       Variant : auth-create
   2. ZMIS_AUTH_ASSIGN_TO_ROLE
       Variant : auth-assign
The problem is in second program, runs in foreground but fails in background.
Code which i have written in my second program
***BDC for Profile creation and assignment to Roles
    CALL FUNCTION 'ZROLE'
      EXPORTING
       ctu                     = 'X'
       mode                    = p_mode
       UPDATE                  = 'L'
*   GROUP                   =
*   USER                    =
*   KEEP                    =
*   HOLDDATE                =
       nodata                  = '/'
        agr_name_neu_001        = wa_role-role_name
        text_002                = wa_role-desc
        text_003                = wa_role-desc
        text_004                = wa_role-desc
       value_01_005            = 'T-ML330881'
        h_fval_low_01_006       = wa_role-auth
        profn_007               = lv_profile
        ptext_008               = lv_text1
* IMPORTING
*   SUBRC                   =
     TABLES
       messtab                 = temp_message.
***Generation of Profile created
CALL FUNCTION 'PRGN_AUTO_GENERATE_PROFILE_NEW'
     EXPORTING
       activity_group                      = wa_role-role_name
*     PROFILE_NAME                        =
*     PROFILE_TEXT                        =
      no_dialog                           = ' '
      rebuild_auth_data                   = ''
      org_levels_with_star                = ' '
      fill_empty_fields_with_star         = 'X'
      template                            = ' '
      check_profgen_tables                = 'X'
      generate_profile                    = 'X'
      authority_check_pfcg                = 'X'
   EXCEPTIONS
     activity_group_does_not_exist       = 1
     activity_group_enqueued             = 2
     profile_name_exists                 = 3
     profile_not_in_namespace            = 4
     no_auth_for_prof_creation           = 5
     no_auth_for_role_change             = 6
     no_auth_for_auth_maint              = 7
     no_auth_for_gen                     = 8
     no_auths                            = 9
     open_auths                          = 10
     too_many_auths                      = 11
     profgen_tables_not_updated          = 12
     error_when_generating_profile       = 13
     OTHERS                              = 14 .
Experts please help me out its very urgent. your help is appreciated and rewarded. Thanking you in advance.
Regards,
Chetan

Hi Praveen,
Yeah definately, my requirement is that I have to access of some BI reports to certain users, so contract data will be downlaoded from ECC on application server, need to read that file from application server and for the each contract i ahould create a authorization object, role creation and assigning of role to the user and profile generation and activation.
To achieve this i have written two programs
1) ZMIS_AUTH_OBJECT_CREATE- This program will create the Authorization Object using BDC and Role creation Using the BAPI
"" Creation of Authorization Object
CALL FUNCTION 'ZAUTHOBJ'
        EXPORTING
         ctu                    = 'X'
         mode                   = p_mode
         UPDATE                 = 'L'
*   GROUP                  =
*   USER                   =
*   KEEP                   =
*   HOLDDATE               =
         nodata                 = '/'
         g_authname_001         = 'ZDUMMY_MIS'
          g_targetauth_002       = wa_tab-auth
          g_authtxt_003          = wa_tab-short_desc
          g_authtxtmd_004        = wa_tab-med_desc
         marked_04_005          = 'X'
          g_authtxt_006          = wa_tab-short_desc
          g_authtxtmd_007        = wa_tab-med_desc
         tctiobjnm_04_008       = 'ZBUS_UNIT'
          g_authtxt_009          = wa_tab-short_desc
          g_authtxtmd_010        = wa_tab-med_desc
         marked_05_011          = ''
         opt_01_012             = 'EQ'
          low_01_013             = wa_tab-bu
          g_authtxt_014          = wa_tab-short_desc
          g_authtxtmd_015        = wa_tab-med_desc
         marked_04_016          = 'X'
          g_authtxt_017          = wa_tab-short_desc
          g_authtxtmd_018        = wa_tab-med_desc
         tctiobjnm_04_019       = 'ZCONTRCT'
          g_authtxt_020          = wa_tab-short_desc
          g_authtxtmd_021        = wa_tab-med_desc
         marked_05_022          = ''
         opt_01_023             = 'EQ'
          low_01_024             = lv_contract
          g_authtxt_025          = wa_tab-short_desc
          g_authtxtmd_026        = wa_tab-med_desc
          g_authtxt_027          = wa_tab-short_desc
          g_authtxtmd_028        = wa_tab-med_desc
          g_authname_029         = wa_tab-auth
* IMPORTING
*   SUBRC                  =
       TABLES
         messtab                = temp_message.
"" Creation of role
LOOP AT it_role INTO wa_role.
      CLEAR wa_text.
      wa_text-text = wa_role-desc.
      wa_text-langu = 'E'.
      APPEND wa_text TO it_text.
      wa_jobrole-agr_name = wa_role-role_name.
      wa_parentrole-agr_name = 'ZM_CT_DUMMY_MIS'.
      wa_method-usmethod = 'CHANGE'.
      CALL FUNCTION 'ZBAPI_JOBROLE_CLONE'
        EXPORTING
          jobrole          = wa_jobrole
         parent           = wa_parentrole
         method           = wa_method
       TABLES
*   RETURN           =
         shorttext     = it_text
*   LONGTEXT         =
*   MENU_NODES       =
*   MENU_TEXTS       =.
    ENDLOOP.
2) ZMIS_AUTH_ASSIGN_TO_ROLE - This program will generate the profile created assign it to the role.
""*BDC for Profile creation and assignment to Roles
    CALL FUNCTION 'ZROLE'
      EXPORTING
       ctu                     = 'X'
       mode                    = p_mode
       UPDATE                  = 'L'
*   GROUP                   =
*   USER                    =
*   KEEP                    =
*   HOLDDATE                =
       nodata                  = '/'
        agr_name_neu_001        = wa_role-role_name
        text_002                = wa_role-desc
        text_003                = wa_role-desc
        text_004                = wa_role-desc
       value_01_005            = 'T-ML330881'
        h_fval_low_01_006       = wa_role-auth
        profn_007               = lv_profile
        ptext_008               = lv_text1
* IMPORTING
*   SUBRC                   =
     TABLES
       messtab                 = temp_message .
   COMMIT WORK AND WAIT.
""*Generation of Profile created
LOOP AT it_role INTO wa_role.
    CALL FUNCTION 'PRGN_AUTO_GENERATE_PROFILE_NEW'
     EXPORTING
       activity_group                      = wa_role-role_name
*     PROFILE_NAME                        =
*     PROFILE_TEXT                        =
      no_dialog                           = ' '
      rebuild_auth_data                   = ''
      org_levels_with_star                = ' '
      fill_empty_fields_with_star         = 'X'
      template                            = ' '
      check_profgen_tables                = 'X'
      generate_profile                    = 'X'
      authority_check_pfcg                = 'X'
   EXCEPTIONS
     activity_group_does_not_exist       = 1
     activity_group_enqueued             = 2
     profile_name_exists                 = 3
     profile_not_in_namespace            = 4
     no_auth_for_prof_creation           = 5
     no_auth_for_role_change             = 6
     no_auth_for_auth_maint              = 7
     no_auth_for_gen                     = 8
     no_auths                            = 9
     open_auths                          = 10
     too_many_auths                      = 11
     profgen_tables_not_updated          = 12
     error_when_generating_profile       = 13
     OTHERS                              = 14
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ENDLOOP.
For creating authorization objects, role & profile i have created one dummy auth, dummy role & dummy profile respectively.
i have created dummy objects to copy the roles from dummy object and assign the same to new Auth obj, role & profile.
Let me know what needs to be done. because these both the programs run perfectly in foreground, but fails in background.
Regards,
Chetan

Oracle 11gR2 RAC: how to solve "user profile creation mask failed" ?

Folks,
Hello.
I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer.
I am using Cluster Verification Utility (CVU) to test the 2 nodes for Grid installation as follows:
[ora11g@rac1 grid] $ ./runcluvfy.sh stage -pre crsinst -n all -r 11gR2 -orainv ora11g -fixup -fixupdir /mydir -verbose
All items for rac2 are passed. There is only one item for rac1 is not passed as follows:
Check default user profile creation mask:
Node Name: rac1
Available: 0002
Required: 0022
Comment: failed
There are 3 ways to solve this issue:
1) In the file /etc/bashrc, change the line "umask 0002" to "umask 0022".
2) In the file /etc/profile, add line "umask 0022" at the end of the file.
3) In the file /etc/csh.cshrc, change the line "umask 002" to "umask 0022".
In rac2, I got the same issue in the past. I just change the line "umask 0002" to "umask 0022" in the file /etc/bashrc and the issue is solved.
But in rac1, I have tried each of the 3 options and also combined 1) and 2), 1) and 3), 2) and 3), 1) and 2) and 3). Totally, that's 7 options. But all of 7 options cannot solve the issue.
The script runcluvfy.sh still tests rac1 user profile creation mask failed. My question is:
Do any folk understand how to solve VM rac1 user profile creation mask problem ?
Thanks.

Folks,
Hello. I follow the document "Oracle Grid Infrastructure Installation Guide 11g Release 2 (11.2) for Linux E22489-04" and do the following:
[root@rac1 /]#echo $SHELL
Output: /bin/bash
This means we need to edit Bash shell file .bash_profile.
[ora11g@rac1 ~]$vi /home/ora11g/.bash_profile
Add this line: umask 022
Then I save the file .bash_profile and reboot OS.
Then I run the following command:
[ora11g@rac1 grid] $ ./runcluvfy.sh stage -pre crsinst -n all -r 11gR2 -orainv ora11g -fixup -fixupdir /mydir -verbose
But the reusult is the same. The issue is not solved as follows:
Check default user profile creation mask:
Node Name: rac1
Available: 0002
Required: 0022
Comment: failed
Do any folk understand how to solve VM rac1 user profile creation mask problem ?
Thanks.

Idoc/BAPI for Certificate Profile creation

Hi,
Is there any Idoc/Bapi available for Certificate Profile creation (Transaction Code QC01).
Appreciate your Inputs.
Thanks.
Regards,
Pc

BAPI_USER_PROFILES_ASSIGN Change User-Profile Assignments
SUSR_BAPI_USER_PROFILES_ASSIGN Methods of object USER
Edited by: Mahalakshmi Padmanaban on Feb 15, 2008 1:51 AM

WE20 - Partner profile Creation

Hi all
I am an FI consultant and working on task - generating the I docs for the Billing documents. We have configured the Out put determination for Billing documents.
I have to create the partner profile for the specified customer in WE20.
Do we have to maintain both Inbound and Out bound parameters?
Also please guide me what are the parameters i need to select for adding in both the cases for the Customer partner profile creation ?
Please let me know.
Thanks
Meenakshi

Hi
You need to work with Basis Consultant and as well as with ABAP Consultant
Settings for customer
You need create Partner Profiles, Partner Type, Agent ,
Outbound Parameters
Partner Role : BP, Message type:INVOIC, Message variant MM,
Outbound Options tab
Receiver Port: XXXXX
Pack. Size: 1
Output Mode
Select Transfer Idoc Immed- In general depends on your requirement
Idoc Type INV0IC01
Check the Check box for Cancel Processing After Syntax Error
Message Control Tab
Application V3
Message type: RD04
Process code : SD08
Settings for Vendor
Define Partner Type
Agent
Inbound Parmeters
Message type : INVOIC
Message Variant: xx
Inbound Options Tab
Process code : INVG
Check the check box Cancel Processing After Syntax Error
Processing by Functional Module
Trigger by background program
Select Trigger Immediately u2013 Ingeneral
These settings are needed
Regards
Odaiah Pelley

Explorer.exe crashes at start of profile creation when domain-joined (using Samba 3.6.25)

Not sure if this is the right forum?
Getting this error (copied from Event Viewer) on a Windows 8.1 Pro client - an event ID of 1000, every time at the start of profile creation when logging in with a domain account. So explorer.exe crashes because of "twinui.appcore.dll" and profile
creation is taking a very long time (about 17 minutes).
Then after being stuck during "Almost ready" screen we are getting a Start-button that is stuck (non-clickable) (and also arrows on the metro-screen icons). Restarting explorer.exe manually helps to get a functional Start-button again.
Tried using a roaming profile and without using a roaming profile (Group Policy setting to always keep profiles local). That does not seem to matter.
Naam van toepassing met fout: Explorer.EXE, versie: 6.3.9600.17667, tijdstempel: 0x54c6f7c2
Naam van module met fout: twinui.appcore.dll, versie: 6.3.9600.17415, tijdstempel: 0x54503801
Uitzonderingscode: 0x80270233
Foutmarge: 0x000000000008cb57
Id van proces met fout: 0xf28
Starttijd van toepassing met fout: 0x01d05bf587567d80
Pad naar toepassing met fout: C:\Windows\Explorer.EXE
Pad naar module met fout: C:\Windows\System32\twinui.appcore.dll
Rapport-id: cf9c3ec8-c7e8-11e4-8262-0019bbd6f620
Volledige pakketnaam met fout:
Relatieve toepassings-id van pakket met fout:
Using Samba 3.6.25 with an LDAP back-end. Installed all updates for Windows 8.1 Pro client.
Thanks in advance for any advice.

Pasting the crash dump analysis using WinDbg (x64):
Microsoft (R) Windows Debugger Version 6.3.9600.17298 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\LocalDumps\explorer.exe.824.dmp]
User Mini Dump File with Full Memory: Only application data is available
************* Symbol Path validation summary **************
Response                         Time (ms)     Location
Deferred                                       srv*DownstreamStore*http://msdl.microsoft.com/download/symbols
Symbol search path is: srv*DownstreamStore*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Version 9600 MP (2 procs) Free x64
Product: WinNt, suite: SingleUserTS
Built by: 6.3.9600.17031 (winblue_gdr.140221-1952)
Machine Name:
Debug session time: Thu Mar 12 11:53:12.000 2015 (UTC + 1:00)
System Uptime: 0 days 21:10:37.682
Process Uptime: 0 days 0:01:05.000
Loading unloaded module list
This dump file has an exception of interest stored in it.
The stored exception information can be accessed via .ecxr.
(338.f94): Unknown exception - code 80270233 (first/second chance not available)
kernel32!RaiseFailFastException+0xae:
00007ffe`cb2faabe e8b1000000      call    kernel32!SignalStartWerSvc (00007ffe`cb2fab74)
0:018> !analyze -v
*                        Exception Analysis
*** ERROR: Symbol file could not be found. Defaulted to export symbols for sppc.dll -
FAULTING_IP:
twinui_appcore!CCriticalFailureHandler::_RaiseFailFastException+c7
00007ffe`bed7cb57 488b4d37        mov     rcx,qword ptr [rbp+37h]
EXCEPTION_RECORD: ffffffffffffffff -- (.exr 0xffffffffffffffff)
ExceptionAddress: 00007ffebed7cb57 (twinui_appcore!CCriticalFailureHandler::_RaiseFailFastException+0x00000000000000c7)
   ExceptionCode: 80270233
ExceptionFlags: 00000001
NumberParameters: 1
   Parameter[0]: ffffffff80070005
CONTEXT: 0000000000000000 -- (.cxr 0x0;r)
rax=000000000a14f560 rbx=000000000a14fa70 rcx=000000000a14f560
rdx=0000000000000000 rsi=0000000000000001 rdi=000000000a14f560
rip=00007ffecb2faabe rsp=000000000a14f480 rbp=000000000a14fad9
r8=0000000000000000 r9=0000000000000006 r10=0000000000000000
r11=00007ffecb544dd7 r12=00007ffebed00090 r13=0000000008234160
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl zr na po nc
cs=0033 ss=002b ds=002b es=002b fs=0053 gs=002b             efl=00000244
kernel32!RaiseFailFastException+0xae:
00007ffe`cb2faabe e8b1000000      call    kernel32!SignalStartWerSvc (00007ffe`cb2fab74)
PROCESS_NAME: explorer.exe
ERROR_CODE: (NTSTATUS) 0x80270233 - <Unable to get error code text>
EXCEPTION_CODE: (HRESULT) 0x80270233 (2150040115) - <Unable to get error code text>
EXCEPTION_PARAMETER1: ffffffff80070005
NTGLOBALFLAG: 2000100
APPLICATION_VERIFIER_FLAGS: 48004
APP: explorer.exe
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) amd64fre
FAULTING_THREAD: 0000000000000f94
BUGCHECK_STR: APPLICATION_FAULT_SHELL_COMPONENT_STARTUP_FAILURE_ERROR_CODE_ffffffff80270233
PRIMARY_PROBLEM_CLASS: SHELL_COMPONENT_STARTUP_FAILURE_ERROR_CODE_ffffffff80270233
DEFAULT_BUCKET_ID: SHELL_COMPONENT_STARTUP_FAILURE_ERROR_CODE_ffffffff80270233
LAST_CONTROL_TRANSFER: from 00007ffebed7cb57 to 00007ffecb2faabe
STACK_TEXT:
00000000`0a14f480 00007ffe`bed7cb57 : 00000000`80070005 00000000`00000004 ffffffff`80070005 00000000`00000000 : kernel32!RaiseFailFastException+0xae
00000000`0a14fa50 00007ffe`bed7c8c2 : 00000000`00000a9c 00000000`0a14fc20 00000000`000003a8 00000000`000003a8 : twinui_appcore!CCriticalFailureHandler::_RaiseFailFastException+0xc7
00000000`0a14fb40 00007ffe`bed8b349 : 00000000`00000000 00007ffe`bed00090 00000000`000003a8 00000000`00000004 : twinui_appcore!CCriticalFailureHandler::HandleFailure+0xba
00000000`0a14fb90 00007ffe`bed19d8b : 00000000`08242340 00000000`0a14fc00 00000000`00000000 00007ffe`bed34838 : twinui_appcore!`Microsoft::WRL::Module<1,Microsoft::WRL::Details::DefaultModule<1> >::Create'::`2'::`dynamic atexit destructor for 'module''+0x7a79
00000000`0a14fbd0 00007ffe`c5055bf1 : 00000000`80070005 00000000`08242340 00000000`00000000 00007ffe`bed19d30 : twinui_appcore!CProcessLifetimeManager::PerformDelayedInitialization+0x5b
00000000`0a14fc20 00007ffe`c5055519 : 00000000`00000000 00000000`08242340 00000000`00000000 00000000`00000034 : windows_immersiveshell_serviceprovider!CImmersiveShellController::_CreateComponents+0x536
00000000`0a14fcc0 00007ffe`c505566e : 00007ffe`00000045 00000000`00000000 00000000`082335f8 00000000`02ea60e8 : windows_immersiveshell_serviceprovider!CImmersiveShellController::_ImmersiveShellComponentsThreadProcInternal+0x17d
00000000`0a14fd50 00007ffe`b41995cd : 00007ffe`c5050000 00007ffe`c50555f0 00000000`00000000 00000000`00000000 : windows_immersiveshell_serviceprovider!CImmersiveShellController::s_ImmersiveShellComponentsThreadProc+0x7a
00000000`0a14fd80 00007ffe`cb2113d2 : 00007ffe`b4199580 00000000`00000000 00000000`00000000 00000000`00000000 : verifier!AVrfpStandardThreadFunction+0x4d
00000000`0a14fdc0 00007ffe`cb51e954 : 00007ffe`cb2113b0 00000000`00000000 00000000`00000000 00000000`00000000 : kernel32!BaseThreadInitThunk+0x22
00000000`0a14fdf0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : ntdll!RtlUserThreadStart+0x34
FOLLOWUP_IP:
twinui_appcore!CCriticalFailureHandler::HandleFailure+ba
00007ffe`bed7c8c2 488b6c2458      mov     rbp,qword ptr [rsp+58h]
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: twinui_appcore!CCriticalFailureHandler::HandleFailure+ba
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: twinui_appcore
IMAGE_NAME: twinui.appcore.dll
DEBUG_FLR_IMAGE_TIMESTAMP: 54503801
STACK_COMMAND: ~18s; .ecxr ; kb
FAILURE_BUCKET_ID: SHELL_COMPONENT_STARTUP_FAILURE_ERROR_CODE_ffffffff80270233_80270233_twinui.appcore.dll!CCriticalFailureHandler::HandleFailure
BUCKET_ID: APPLICATION_FAULT_SHELL_COMPONENT_STARTUP_FAILURE_ERROR_CODE_ffffffff80270233_twinui_appcore!CCriticalFailureHandler::HandleFailure+ba
ANALYSIS_SOURCE: UM
FAILURE_ID_HASH_STRING: um:shell_component_startup_failure_error_code_ffffffff80270233_80270233_twinui.appcore.dll!ccriticalfailurehandler::handlefailure
FAILURE_ID_HASH: {bc588def-f8dc-26b8-dac8-a057fb6557c4}
Followup: MachineOwner
0:018> lmvm twinui_appcore
start             end                 module name
00007ffe`becf0000 00007ffe`bee20000   twinui_appcore   (pdb symbols)          downstreamstore\twinui.appcore.pdb\310246EA4A1E4BF8A48502B727A7376B1\twinui.appcore.pdb
    Loaded symbol image file: twinui.appcore.dll
    Image path: C:\Windows\System32\twinui.appcore.dll
    Image name: twinui.appcore.dll
    Timestamp:        Wed Oct 29 01:42:41 2014 (54503801)
    CheckSum:         0013A0E7
    ImageSize:        00130000
    File version:     6.3.9600.17415
    Product version: 6.3.9600.17415
    File flags:       0 (Mask 3F)
    File OS:          40004 NT Win32
    File type:        2.0 Dll
    File date:        00000000.00000000
    Translations:     0409.04b0
    CompanyName:      Microsoft Corporation
    ProductName:      Microsoft® Windows® Operating System
    InternalName:     TWINUI.APPCORE
    OriginalFilename: TWINUI.APPCORE.dll
    ProductVersion:   6.3.9600.17415
    FileVersion:      6.3.9600.17415 (winblue_r4.141028-1500)
    FileDescription: TWINUI.APPCORE
    LegalCopyright:   © Microsoft Corporation. All rights reserved.
Does this make any sense to anyone?

Arequest for a solution of profile creation

hello.I got an used Hp palm phone and its model is P102UNA I have selected the option Secure full erase in it,after that the mobile automatically shut down's itself.And when I turn it on it ask's me to create a new account or sign in to your account I created a new account and my mobile got activated and my mobile after somedays met with a trouble named virus and then once again I select the option of 'secure full erase' after that it automatically shut down's itself.And when I turn it on I do the same process but it tells me your profile creation is failed.kindly request for solution.

Read this:https://pivotce.com/2015/06/24/tip-how-to-bypass-activation/

Profile set creation problem..

Hi,
I was trying to create profile set..but when I select attribute list from left, I am unable to expand data source ( attribute set & attribute ) & hence unable to drag to modelling area....don't know where did i mess up...?
Your guidance will be appreciated
Thanks in advance
Anil

Hi Deepak,
sorry. lemme tell you what z happening.
Everything is ok till maintaing data source for segment builder.attribute list is created with attribute set. i can see assigned attributes & these are filtered as well.basically in this section I can see my attribute set & expand these to see filtered attributes.no problem so far.
now coming to segment builder craete profile set, then camapign execution then camapign, new profile set is given a name.If i go left to attribute set & scroll to my attribute list I cannot see anything below attributes in component area. it seems nothing is being selected. i tried to save & see. no results.Obviously no drag/drop in staging area.
I know this is a very basic problem but i have nobody around me who i can sit with & sort out. I am just referring different materials & practising on my system.
If you can reply on anilbatra1athotmail.co.uk as i think i shouldn't waste everybody's precious time on such a basic operational issue.
Your prompt reply will be highly appreciated.
regards.
Anil

Profile Manager problems: enroll fails, organization name NULL

At the moment I have 4 VM's running OS X Lion Server. All four are running different services.
I have one OD Master, and 3 OD replica's. On one of the three replica's I am trying to setup Profile Manager.
Two problems came up:
1. Organization is set to NULL instead of my Domain.
Jan 24 17:13:45 laelaps scep_helper[2165]: SCEP_HELPER: /SourceCache/RemoteDeviceManagement/RemoteDeviceManagement-702.13/scep_helper/m ain.m:1084 'org' is NULL
My Trust Profile is listed as Trust Profile for. No additional name is attached.
2. Devices fail to enroll even after installing the trust profile. If I install the trust profile they state that the SCEP Server is invalid.
Any advice on those two problems?

The solution turned out to be simple, but much work.
I destroyed the OD. Reinitialized the server that was - according to my planning - be serving Profile Manager as an Open Directory Master, configured the other servers as replica's, yet the 'org' NULL did not go away.
The enrollment was succesfull thanks to Jonathan Melville's solution.
After that I completely reinstalled the four servers. Made the server that was supposed to be serving ProfileManager the directory master. The three other servers were configured as replica's. Set up Profile Manager and it worked out as it was supposed to.
The morale of this story: Server Admin does not set the organisation correctly. If you create the Open Directory using Server.app it will set this correctly. So make sure you use Server.app for the Open Directory creation. Replica's can - and have to - be done by the Server Admin.
Thanks for the help Jonathan Melville, your shot at masters and replica's was correct.

Database creation problem on Windows XP

Hello Readers
I have installed ORACLE Database Engine on windows XP.
I am facing problem in database creation.
I have tryed wizard as well as mannual method.
in wizard at 90% it gives an error "END-OF-FILE ON COMMUNICATION CHANNEL"
although CD drive is in CR Rom drive.
Please help me ....
Rashid Masood Ashraf
email: [email protected]

After going to the properties as you suggested:
Right now the Obtain an IP address automatically is checked
I need to check the Use the following IP address:
What should I enter for
IP address:
Subnet mask:
Default gateway:
Please help.
Edited by: Nel Marcus on Dec 2, 2008 3:49 PM

Another Microsoft exchange profile creation in win 8.1 PC

hi team,
i could not able to create another MS profile and i can't make any swich operation on win 8.1,
when i am clicking on the mail ( office 2013 ) in control pannel , it doen't responding .
could please provide me if you have any solution for this .
thank you ,
Regards
Lokesh

Hi,
Please check the following path to see if you can click the cpl file.
C:\Program Files (x86)\Microsoft Office\Office15\MLCFG32.CPL
Besides, please check the registry path below to see if the path is right.
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Control Panel\Cpls
If the above is ok, I recommend you check the installation of Office 2013: Click-to-Run or MSI. If it is Click-to-Run, I recommend you switch to use an MSI-based Office edition to check the result. For more details about this, you can refer to
this article.
If the issue persists, in order to resolve it more efficiently, I recommend you post to Office forum which is staffed by more experts specializing in this kind of problems. You might get a better answer there.
Here is the link for Office forum for your convenience.
http://social.technet.microsoft.com/Forums/office/en-us/home?forum=outlook
Best regards,
Belinda
Belinda Ma
TechNet Community Support

MAPI over HTTP not working correctly, Outlook 2013 clients prompting for credentials during profile creation or opening depending on security of virtual directory

ENVIRONMENT
-1 Exchange 2013 SP1 CU7 server with all roles that is also a hybrid server with Office 365 tenant, mailboxes are all on premise only LYNC online is being utilized right now.
-Exchange 2013 public folders
-Mix of Outlook 2013 SP1 and Outlook 2010 SP3 clients all fully update to day as of Feb 2015
Outlook anywhere is working perfectly across all clients both internally and externally using autodiscover. Both Outlook 2013 and 2010 clients can open the program and create a profile automatically via autodiscover and no additional logon prompts
are seen.
We set the internal and external mapi virtual directory URLs to a valid URL that also matches the Exchange 2013 SSL certificate. We set the security to ntlm, negotiate on the mapi virtual directory. We reset IIS and enabled mapi over http in
the org config. We run in to problems here.
Outlook 2010 clients appear to be working fine. We can create a new profile and open and close Outlook without any logon prompts and verify that MAPIHTTP and Negotiate are used to connect to Exchange.
Outlook 2013 clients are having problems. As soon as we try to create a profile it says your administrator has made a change that requires you to restart outlook and then a windows logon prompt appears. If we authenticate Outlook will open and connect.
This logon prompt should not occur. We can confirm that it is connecting via MAPI HTTP and Negotiate.
If we set the mapi virtual directory to NTLM only then a logon prompt also appears during every open of Outlook 2013. We can confirm that it is trying to connect with MAPIHTTP via NTLM in the outlook connection test screen.
I do not understand this behavior by Outlook 2013 which was supposed to be designed with MAPI HTTP in mind. I would think the same issues would occur with Outlook 2010 but they do not. I am not sure how to resolve this and I am looking for help.

I have the same problem. Exchange and Outlook are both up to date. After creating a new profile Outlook prompts for username/password. A lot of users also get this prompt while
working - the profiles have been "migrated" from Exchange server 2010. <o:p></o:p>
Niko, as i can see in your screenshot you do not have Mapi over HTTP enabled. Why? You can change settings in the security tab – if you have Mapi over
HTTP enabled all options are grayed out (please correct me if I
am wrong):
This is a very annoying thing – does anybody else have the same problem?
Any suggestions on this?
Marc

Profile creation problem on n85

Similar Messages

Maybe you are looking for