Profile does not activated (it shows an error backup is not possible)

Dear Experts ,
please solve my problem
here i changed one parameter by RZ10 in DEFAULT profile and i saved it then it prompts for Activate or not i said yes but the profile is not activated and it shows an error that is backup is not possible
parameter (login/system_client =100)
i did not get why it showing that error
please clarefy me
Regards

Hi,
Make sure that there is proper access for this file at the OS level. Normally, when you are changing any profile at SAP level it will try to create a backup of existing file at OS level. Also, check if the parameter is set correctly and saved properly.
If you are not able to change the file at SAP from RZ10 then change the same at OS level and after that restart the instance for parameter to take effect. After the system is restarted then again the load the profiles back in to the system using RZ10-->Utilities->Import profile->of active servers
Regards,
Sharath

Similar Messages

SmartForm language EN is not active and has no errors

Hi All,
I am getting an error "Form 'My Form Name' language EN is not active and has no errors ". This a smart form that's currently working fine with an existing company code but when assign this form (form was not changed at all) to another company code and run the dunning statement, it give us the above error. The funny thing is that it is active but still gives us the error.
Does anyone have any idea why this is and what to do to resolve this.
Regards.

Hi,
Go into ur form in SMARTFORMS t-code............
In form attributes u have 3 radio buttons right
select translate into all languages option and activate it...........
Don't check the 2 check boxes right to dat.....
Cheers,
jose.

I have downloaded the trail version of CS6 and run that. it shows the error ' entry point not found"

i have downloaded the trail version of CS6 and run that. it shows the error ' entry point not found"

Your computer does not meet the system requirements. Refer to the tech specs on the product page.
Mylenium

My mac mini is running slow. Bought it in 2009. Activity monitor shows nothing running that should not be. Someone suggested it might be my operating system? Check for software updates, and I am current. Suggestions?

My mac mini is running slow. Bought it in 2009. Activity monitor shows nothing running that should not be. Someone suggested it might be my operating system? Check for software updates, and I am current. Suggestions?

Open Activity Monitor, Show:>All Processes, sort on CPU%, see if anything using too much CPU% when this happens, click on Memory tab, do you have many Pageouts?
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
Check the S.M.A.R.T. status of the drive in Disk Utilty by highlighting the Drive & looking at the bottom of the window.

Form Z_FIDUN_A language EN is not active and has no errors

Hi Everyone,
I have copied one Smartform from 4.6C to ECC 6.0. and i have activated that Smartform in ECC 6.0. when i tried to print it is giving me the error "Form Z_FIDUN_A language EN is not active and has no errors". I have activated it in EN only.
Please help me.

Hi Leela,
Try running the FM generated for the SmartForm and resolve any errors that might occur.
Or Else
the issue must be the customising where the Business Events are trying to call SAP Scripts and not Smartforms.
Let me know If you require more help on this.
Edited by: Raj on Oct 29, 2010 1:37 PM

Form Program Name language EN is not active and has no errors

Dear all,
I'm new to SAP development. I have copied the standard RLVSDR40 and made some modification on it. When i tried to print in lt31. I encounter the following error:
"Form <program name> language EN is not active and has no errors".
Any idea about this?? What is the standard procedure of this kind development??
Regards,
Kit

hi
first go to SE71 and give Form Name and Original Language of the form and copy it to zform.
Now open this Zform in change mode and go to Utilities-> change original language to log on language here EN in your case-> and save it.
Now your Zform is in language EN note tat now when you are opening your zform to modufy you might be trying to change it in DE so change language to EN and then modify it.
After making changes go to NACE transaction to assign this zform to transaction you are using.
Nace->choose application->output type->choose your output type->Double click processing routines->you will find one column pdf smartform/scriptname-> here give your zform name
It will surely work if not get back to me

Form ZF_J_1IEWT_CERT language EN is not active and has no errors

Hi,
i got the following Error while Posting of With Holding Tax Certificates for a vendor through T-Code J1INCERT.
Form ZF_J_1IEWT_CERT language EN is not active and has no errors
Please help.....
Thanks
Rashmi

Hi Rashmi,
In EWT there is a standard form for withholding tax certificate is J_1IEWT_CERT and your organization has created a new from name ZF_J_1IEWT_CERT . Just ask your ABAPer if this form has been activated and maintained properly.
Contact your ABAPer will solve the issue.
Regards,
Chintan Joshi.

Form zform4 language EN is not active and has no errors

after executing a program calling script , it gives the following error after clicking print preview : Form zform4 language EN is not active and has no errors .
pl find solution.

Moderator message - Welcome to SCN.
Have you tried activating the form (in SE71)?
Rob

My Iphone 4 will not Sync it just says Error itunes could not sync because the sync session failed to start ........ can anyone help me

My iphone will not Sync it just says Error itunes could not syn because thee sync session failled to start .............. can anyone help me ?

Same thing for me right now. Anybody have a fix on a Mac? My iPad syncs OK but my iphone 4S has this message.

I deleted iTunes when it said "iTunes could not back up iPhone because the backup could not be saved on the computer"and now it wont let me install it again and keeps saying "itunes cannot be installed because the file cannot be found in the cabinet "

iTunes told me to delete my backup folder when I was having problems syncing my phone to my computer. After that it wouldn't work at all. After trying and trying I deleted iTunes when it said "iTunes could not back up iPhone because the backup could not be saved on the computer"and now it wont let me install it again and keeps saying "itunes cannot be installed because the file cannot be found in the cabinet ". What the **** itunes? Nothing is working!!
I wanted to update my iTunes so I could sync my phone to my computer and update my phones software so I can use the latest apps that need a 4.2 or higher.
This is not fun for me so if anyone knows what I can do to fix this please help. Is it possible to download the "cabinent file" with the lastest iTunes?
Thank you.
-Kait
My phone is the iPhone4 and my computer is a Windows Vista

I doubt that corrupt files are the problem. It is more likely a space or permissions issue. Is the hard-drive on which iTunes is stored close to capacity? Do you (or the particular user profile you have logged on with) have the requisite permissions to save to that drive?
Otherwise, do you get an error code? This might point us in the right direction.

HT3805 My Aperture 3 just crashed, i.e., it would not open and showed an error message -1712. I sent the current version to trash and reinstalled from my A3 disk, but after installing again it still says "Aperture can not open -1712."

My Aperture 3 just crashed...by that I mean it would not open and showed the message: "Aperture 3 cannot open. -1712." I have the latest A3 version and had been using it continually for 3 years. This was the first crash. And it will not open as often as I tried.
I am using a 13" Macbook Pro with OSX 10.8.5.
I tried sending the A3 application to trash, and reinstalling from my A3 disk. Install message said "installation successful." But A3 would still not open and gave same message with -1712.
Any suggestions what I should do or try?
Thanks

Perhaps your Aperture library was damaged, when Aperture crashed. What where you doing, right before the crash happened?
- If you installed new software - programs, plug-ins, preferences panels, check, if they are compatible.
- If you imported new images, you may have imported corrupted files, that crash Aperture.
Can Aperture launch correctly, when you try to open a new Aperture library?
Hold down the options-key, when you launch Aperture and select to create a new library. Import a few images. Does that work?
If Aperture will launch on a new Library, try to repair your current library. Hold down the key-combination option-command ⌥⌘ firmly while double-clicking the Aperture library to open in First Aid Mode. Hold the keys down, until the panel appears, and then try the First Aid Options in turn.
I have the latest A3 version
Is it Aperture 3.4.5? The latest Aperture 3.5.1 will not work with Mt. Lion.

GRPO print preview not coming it shows internel error

Dear Experts!.
                    While i am viewing my end user system in the GRPO template print preview not coming, eventhough the default system template also i am trying it shows internel error so anyone suggest me
It is very urget
Regards
Selva.D

Hai jeyakandan,
                While print preview the system template the error message shows
"internal error occured " .
                                 This is a system template . And My GRPO template also i can't get preview that also shows the same error.
Eventhough The System configured with the printer,so i can able to take print from other marketing document like purchase and sales order documents in both system template and My Designed template.

VisualRF not starting and showing communication error timeout

Problem:
VisualRf is not starting and shows connection timed out on the Airwave GUI.
If we look at the visualRF logs, from the location /var/log/visualrf/visualrf.log
we can see the below error in the log:
2015-06-14 11:53:29,461 WARN Inventory com.airwave.amp.RoleParserImpl Existing login cookie is null. Initialize amp login.
2015-06-14 11:53:29,479 ERROR Inventory com.airwave.amp.RoleParserImpl Failed to initialize session cookie.
2015-06-14 11:53:29,479 ERROR Inventory com.airwave.amp.RoleParserImpl prepareMethod
java.lang.Exception: Failed to login.
Diagnostics:
When we look at the below error,
java.lang.Exception: Failed to login.
We could see that VisualRF is trying to login to Airwave database and failing to login for whatever reason. When we look at the Airwave database for this visualRF user, we could see this below:
The highlighted username in Yellow is the visualRF, VisaulRF creates this username randomly and we could see that login_attempts for this user is 10 and Airwave disables the user after 10 attempts. Therefore that explains why is_enabled is 0.
This could happen for different reasons, when we restore the visualRF backup and backup has some issues or when we do a vrf bootstrap, to do a factory reset on visualRF or could be any other reason.
Solution
To resolve this issue, all we need to do is update the Airwave database to enable this user, as shown below:
[root@localhost mercury]# dbc "update users set is_enabled = 1 where username = 'AihmrH3MHQ';"
once done, VisualRF would start working normally.

Got the screenshot, thanks. And hello again Rob
Follow-up:
2) Not sure that it matters, but what's the url you see in the BrowserLab UI after making the request? What path do you have defined as the Local Site Path in your site definition in DW?
3) How are you requesting the screenshots? From the BrowserLab panel inside DW?
4) Open up the BrowserLab panel in DW and see what the drop-down control is set to. If it doesn't say "Local" change it to Local and press the preview button and let me know what happens.
6) I want to make sure that none of the assets your page(s) need live outside the directory you've got within your DW site definition.
Thanks,
Mark

I have installed safari but it is not working and showing the error message

i have downloaded a latest version of safari and as i install it it is saying something like this
"Your copy of safari is missing important software resources. Please reinstall safari"
and even if i install it it says the same on opening safari after reinstalling i hate slow speed and i want it please help me ie8 is very bad to use
http://img251.imageshack.us/img251/2295/screensnaperimagee.png

That sounds like your Apple Application Support might be damaged. (Safari needs a properly functioning Apple Application Support in place in order to work correctly.)
Perhaps try uninstalling both Safari and Apple Application Support, and then reinstalling Safari (which should also reinstall Apple Application Support). Does safari now launch without the error message?

Design Notes - Can DW show all referenced files with notes?

Hello Everyone,
Is there a way to have DW display all files with Design Notes
on them? I like to make notes on any php files that I have edited
to keep track of code changes (especially when updating modules),
but I cant seem to find a way to have all edits show for a working
site. Is this possible? If so, how? If not, does anybody know of I
workaround? (apart from using a repository of course).
Many thanks if somebody has any ideas on this.
Steve

Well it's not the perfect solution for me, but here's the
closest thing from the docs.
Notes:
To show the yellow Design Notes icons, select Site > Manage
Sites > [your site name] > Edit > File View Columns on the
Advanced tab. Select Notes in the list panel and choose the Show
option. When you click the Expand button on the Files toolbar to
show both the local and remote site, you have a Notes column in
your local site that shows a yellow note icon for any file with a
Design Note.
Man, I kept missing this in the docs, finally...... Hope this
may help someone else in future!
Steve

Profile does not activated (it shows an error backup is not possible)

Similar Messages

Maybe you are looking for