Profile Failed to Install

I am getting error when installing the MDM payload, the SCEP is working fine but while installing the MDM payload ,I am getting the following errors
MCHTTPTransactionErrorDomain , The server certificate for https://url is invalid.
MCInstallationErrorDomain, The payload com.one.profile.mdm2 could not be installed.
MCProfileErrorDomain
For your information , I can see these errors in the iPCU console.I have installed a SSL certificate i.e https. Can anyone tell me what is the problem while installing this MDM payload??

Similar Messages

Device Enrolls but MDM profile will not install

We downloaded and installed version 2.7 Zenworks Mobile Management. All certificates verify ok. We are using a GoDaddy cert. We also have a Bretford cart, 30 ipads for testing, we have completed the setup of a VPP account, we have a Mac Mini server with Configurator installed and working, we have setup 5 ipads so far for testing. We have "cloned" them with the Zenworks app pre-installed, we have cloned them without the Zenworks app and installed it manually. They show up in the Mobile Management console under users after they enroll with some information like %battery, OS Version, Memory Capacity but the configuration File will not load, when you try to install it from the Zenworks App, it pulls up safari and pops up the install profile, it says it is Verified, you click install and it pulls up a warning screen about what it will allow the administrator to do and when you select install it just says Profile Installation Failed, Profile Failed to install and you can click OK and it goes back to the Install Profile box again. Any help would be great.

Glad you figured your profile issue out. Quick question on your deployment. You say you are using a GoDaddy Cert and the profile shows as Verified. What version of iOS are you using for your iPads? Did you just use the Godaddy instructions to install your SSL cert? I have been trying to figure out why our profiles show as Not verified for some time. I have been able to figure out that our ZMM is working and can do APN push items with no major issue.
Are you using the Enterprise app for your deployment? (https://zmmupdate.novell.com/apps)
Richard

AnyConnect 3.1.01065 error - Failed to install AnyConnect VPN Profile because of file move error. A VPN connection cannot be established.

I've got a user running:
AnyConnect 3.1.01065
on
Windows 7 64bit.
Several weeks ago she started encountering the following error:
-after logging into Windows and launching the AnyConnect client, she enters her username and password and successfully authenticates.
-the connection is not established and she's presented with the following message: "Failed to install AnyConnect VPN Profile because of file move error. A VPN connection cannot be established."
After doing some troubleshooting, inlcuding uninstalling/reinstalling the anyconnect client, it seems the culprit is the following file:
C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile\<filename>.xml. When the problem occurs (which is not regularly, sometimes it occurs daily, sometimes just once a week) examining that file indicates it has no security or permissions set. Quitting the AnyConnect software, modifying the file so that the user has full control of it, then relaunching AnyConnect fixes the problem (until it happens again). Uninstalling, and making sure to move C:\ProgramData\Cisco to the trash, then reinstalling did not seem to help.
The closest match in these forums is the following thread, https://supportforums.cisco.com/message/3760446 - though no clear resolution was given.
Has anyone else encountered this, and been able to fix it?
Thanks much.

Just FYI, it seems at least in this case, purging all the previous system restore points seems to have resolved this issue...

Lightroom 2.5 Upgrade fails to install Camera Profiles

Having just upgraded from LR 2.4 to LR 3.5 as Administrator, I am unable to select any camera profile except one listed as "Beta" when logged on as a User. The Adobe provided camera profiles that I've come to expect are ALL missing.
It appears that Adobe provided camera profiles have been installed at C;\Documents and Settings\All Users\... and NONE are located at C:\Documents and Settings\UserName\...
Is this expected installation behaviour?
Shouldn't the camera profiles be located at some other location that allows anyone logging on to my computer to see ALL Adobe provided camera profiles?
How do I fix this problem so that ALL that log on can see the Adobe provided camera profiles?
Any assistance in this matter would be greatly appreciated!

The LR installer should install all the profiles for all supported cameras.
Profiles are selectable in Develop module from the camera calibration tab while working with RAW files.
The only profiles that will be displayed will be the ones specific to the camera model for the file selected.
Profiles for other cameras and models will not be displayed.
No profiles are selectable or displayed while working with jpeg, psd or tiff files.

App-V apps intermittantly fail to install via SCCM

Hi,
I have a few sequenced apps deployed using SCCM to our work computers. These apps are deployed to User collections. When a new computer is brought online they intermittently fail to install, however if you manually 'retry' the installation in
Software Center, after the 4th or 5th attempt of retrying they install successfully. Some apps fail to automatically install far more than others with one app failing to install consistently.
When the apps fail to install the streaming-transport debug log shows errors for Auto-Proxy detection and failure to send or receive HTTP responses to the distribution point full path to the .appv package file. Send failures return an HResult of 0x80190193.
Receive failures return an HResult of 0x80190193 or 0x80072f0c.
The AppEnforce.log file returns an HResult of 80190193 and "The provided URL could not be resolved. Please check that the URL is valid." I assumed this to be the FQDN part of the command line that points at the DP package location.
The bit that puzzles me the most is that if it was a problem with the DP then surely none of the apps would install, and certainly a persisting with a manual 'retry' wouldn't produce a successful install result.
We use a proxy server. AutoDetect proxy settings in IE is disabled and the FQDN of the Site Server/Distribution Point has been added to the Intranet Zone in IE. If I tell IE not to use a proxy at all I still get the same errors (including the
auto proxy detection error) in the Streaming-transport debug log for the apps that have failed to install.
The App-V 5 deployment types are all configured to stream rather than download and run. If I switch them to 'download and run' they all consistently install without errors.
App-V clients are configured to use 'shared cache mode' and 'package scripts' is enabled.
Our environment is as follows: SCCM 2012 SP1 running on Server 2012. App-V 5 SP1 clients installed on Windows 7 Enterprise with SP1.
Any ideas as to what is going on would be welcomed as I've been tearing my hair out with this for a week!
Event logs - server and domain names have been changed - Streaming-Transport debug log:
Event ID 85
Log Name:      Microsoft-AppV-Streaming-Transport/Debug
Source:        Microsoft-AppV-Streaming-Transport
Date:          28/08/2013 10:07:42
Event ID:      85
Task Category: Transport request operation
Level:         Error
Keywords:
User:          SYSTEM
Computer:      SCH-UEVGEN02.webfarm.local
Description:
Auto proxy detection for URL
https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv failed with status Unknown HResult Error code: 0x80072f94
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-AppV-Streaming-Transport" Guid="{15936a6f-bea1-479e-9ab1-1815802d2205}" />
    <EventID>85</EventID>
    <Version>1</Version>
    <Level>2</Level>
    <Task>5</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2013-08-28T09:07:42.223458300Z" />
    <EventRecordID>472</EventRecordID>
    <Correlation />
    <Execution ProcessID="3948" ThreadID="4012" ProcessorID="0" KernelTime="2" UserTime="1" />
    <Channel>Microsoft-AppV-Streaming-Transport/Debug</Channel>
    <Computer>SCH-UEVGEN02.webfarm.local</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="StringValue">https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv</Data>
    <Data Name="Status">-2147012716</Data>
</EventData>
</Event>
Event ID 66
Log Name:      Microsoft-AppV-Streaming-Transport/Debug
Source:        Microsoft-AppV-Streaming-Transport
Date:          28/08/2013 10:07:42
Event ID:      66
Task Category: Transport request operation
Level:         Error
Keywords:
User:          SYSTEM
Computer:      SCH-UEVGEN02.webfarm.local
Description:
HTTP response receipt from
https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv failed. Status: Unknown HResult Error code: 0x80072f0c
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-AppV-Streaming-Transport" Guid="{15936a6f-bea1-479e-9ab1-1815802d2205}" />
    <EventID>66</EventID>
    <Version>1</Version>
    <Level>2</Level>
    <Task>5</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2013-08-28T09:07:42.312531300Z" />
    <EventRecordID>476</EventRecordID>
    <Correlation />
    <Execution ProcessID="3948" ThreadID="4012" ProcessorID="0" KernelTime="2" UserTime="1" />
    <Channel>Microsoft-AppV-Streaming-Transport/Debug</Channel>
    <Computer>SCH-UEVGEN02.webfarm.local</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="Status">-2147012852</Data>
    <Data Name="URL">https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv</Data>
</EventData>
</Event>
Event ID 67
Log Name:      Microsoft-AppV-Streaming-Transport/Debug
Source:        Microsoft-AppV-Streaming-Transport
Date:          28/08/2013 10:07:42
Event ID:      67
Task Category: Transport request operation
Level:         Error
Keywords:
User:          SYSTEM
Computer:      SCH-UEVGEN02.webfarm.local
Description:
HTTP request from
https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv failed. Status: Unknown HResult Error code: 0x80190193
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-AppV-Streaming-Transport" Guid="{15936a6f-bea1-479e-9ab1-1815802d2205}" />
    <EventID>67</EventID>
    <Version>1</Version>
    <Level>2</Level>
    <Task>5</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2013-08-28T09:07:42.325397400Z" />
    <EventRecordID>478</EventRecordID>
    <Correlation />
    <Execution ProcessID="3948" ThreadID="4012" ProcessorID="0" KernelTime="2" UserTime="1" />
    <Channel>Microsoft-AppV-Streaming-Transport/Debug</Channel>
    <Computer>SCH-UEVGEN02.webfarm.local</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="Status">-2145844845</Data>
    <Data Name="URL">https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv</Data>
</EventData>
</Event>
Event ID 110
Log Name:      Microsoft-AppV-Streaming-Transport/Debug
Source:        Microsoft-AppV-Streaming-Transport
Date:          28/08/2013 10:07:42
Event ID:      110
Task Category: Transport stream request operation
Level:         Error
Keywords:
User:          SYSTEM
Computer:      SCH-UEVGEN02.webfarm.local
Description:
Http Send request on URI
https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv with header failed with status Unknown HResult Error code: 0x80190193.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-AppV-Streaming-Transport" Guid="{15936a6f-bea1-479e-9ab1-1815802d2205}" />
    <EventID>110</EventID>
    <Version>1</Version>
    <Level>2</Level>
    <Task>4</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2013-08-28T09:07:42.325397400Z" />
    <EventRecordID>479</EventRecordID>
    <Correlation />
    <Execution ProcessID="3948" ThreadID="4012" ProcessorID="0" KernelTime="2" UserTime="1" />
    <Channel>Microsoft-AppV-Streaming-Transport/Debug</Channel>
    <Computer>SCH-UEVGEN02.webfarm.local</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="URI">https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv</Data>
    <Data Name="Header">
    </Data>
    <Data Name="Status">-2145844845</Data>
</EventData>
</Event>
Error in AppEnforce.log
<![LOG[The AppV 5X client is configured for use with ConfigMgr.]LOG]!><time="10:07:38.954-60" date="08-28-2013" component="AppEnforce" context="" type="1" thread="2552" file="appvclientconfig5x.cpp:64">
<![LOG[The package with GUID efaa1d42-dc70-4fc0-8976-fb692e83c395 is not installed on this machine yet]LOG]!><time="10:07:38.964-60" date="08-28-2013" component="AppEnforce" context="" type="1" thread="2552"
file="appvpackagequery5x.cpp:177">
<![LOG[Package: WinRAR 4.20 Win7 x64 with version GUID 6d7400fc-169b-4fa1-b292-29fdac24cae4 is not installed. Will install it]LOG]!><time="10:07:38.965-60" date="08-28-2013" component="AppEnforce" context=""
type="1" thread="2552" file="appv5xhandler.cpp:459">
<![LOG[Configure the package WinRAR 4.20 Win7 x64 as streaming. Use content ID Content_5f364464-dd13-4bb2-8142-3c41850f5e49 and content version 1]LOG]!><time="10:07:38.965-60" date="08-28-2013" component="AppEnforce" context=""
type="1" thread="2552" file="appv5xhandler.cpp:475">
<![LOG[Using content path <a href="https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv]LOG]!><time="10:07:39.206-60">https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv]LOG]!><time="10:07:39.206-60"
date="08-28-2013" component="AppEnforce" context="" type="1" thread="2552" file="appv5xhandler.cpp:494">
<![LOG[Running App-V command ["C:\\Windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1'; Add-AppvClientPackage
-Path 'https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv' -DynamicDeploymentConfiguration 'C:\Windows\ccmcache\4\WinRAR_420_Win7x64_DeploymentConfig.xml'] for the machine]LOG]!><time="10:07:39.211-60"
date="08-28-2013" component="AppEnforce" context="" type="1" thread="2552" file="appvcommandutil.cpp:117">
<![LOG[    Executing Command line: "C:\\Windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1';
Add-AppvClientPackage -Path 'https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv' -DynamicDeploymentConfiguration 'C:\Windows\ccmcache\4\WinRAR_420_Win7x64_DeploymentConfig.xml' with system
context]LOG]!><time="10:07:39.211-60" date="08-28-2013" component="AppEnforce" context="" type="1" thread="2552" file="appexcnlib.cpp:345">
<![LOG[    Process 3948 terminated with exitcode: 1]LOG]!><time="10:07:42.823-60" date="08-28-2013" component="AppEnforce" context="" type="1" thread="2552" file="appexcnlib.cpp:431">
<![LOG[Here is the error message generated by the process:
Add-AppvClientPackage : The provided URL could not be resolved. Please check
that the URL is valid. HRESULT: 80190193.
At line:1 char:106
+ import-module 'C:\Program Files\Microsoft Application
Virtualization\Client\Appv ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
    + CategoryInfo          : NotSpecified: (:) [Add-AppvClientPackage], COMEx
   ception
    + FullyQualifiedErrorId : System.Runtime.InteropServices.COMException,Micr
   osoft.AppV.AppvClientPowerShell.AddAppvPackage
]LOG]!><time="10:07:42.823-60" date="08-28-2013" component="AppEnforce" context="" type="3" thread="2552" file="appexcnlib.cpp:441">
<![LOG[AppV command ["C:\\Windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1'; Add-AppvClientPackage -Path
'https://CM01.domain.local:443/SMS_DP_SMSPKG$/Content_5f364464-dd13-4bb2-8142-3c41850f5e49.1/WinRAR_420_Win7x64.appv' -DynamicDeploymentConfiguration 'C:\Windows\ccmcache\4\WinRAR_420_Win7x64_DeploymentConfig.xml'] failed with return code 1.]LOG]!><time="10:07:42.823-60"
date="08-28-2013" component="AppEnforce" context="" type="3" thread="2552" file="appvcommandutil.cpp:128">
<![LOG[AppVCommandUtil::RunAppVCommand() failed. (0x87d0128f)]LOG]!><time="10:07:42.824-60" date="08-28-2013" component="AppEnforce" context="" type="3" thread="2552" file="appvcommandutil.cpp:154">
<![LOG[AppVManageClient5X::InstallAppVPackage() failed. (0x87d0128f)]LOG]!><time="10:07:42.824-60" date="08-28-2013" component="AppEnforce" context="" type="3" thread="2552" file="appvmanage5x.cpp:86">
<![LOG[    CAppV5XHandler::InstallApp() failed. (0x87d0128f)]LOG]!><time="10:07:42.824-60" date="08-28-2013" component="AppEnforce" context="" type="3" thread="2552" file="appv5xhandler.cpp:646">
<![LOG[++++++ App enforcement completed (4 seconds) for App DT "WinRAR 4.20 Win7 x64" [ScopeId_86A33434-E76B-408D-8910-C2EADC8E3BA0/DeploymentType_93e3e297-e10c-421e-a178-fe43212b1bde], Revision: 2, User SID: S-1-5-21-3578899820-3203048151-3782333795-4928]
++++++]LOG]!><time="10:07:42.826-60" date="08-28-2013" component="AppEnforce" context="" type="1" thread="2552" file="appprovider.cpp:2366">

Hey Tim,
Since we're targeting vmware view machines in floating pools with roaming profiles we can't really go live with download and execute as the users will stab away at the dead shortcuts and raise calls with service desk until their apps finish downloading.
Going to try and resolve the intermittent Add-AppvClientPackage
and
Publish-AppvClientPackage
and return to the SSL issue later.

IPhone configuration utility fails during install

Hi, I'm trying to use the iPhone configuration to setup the APN settings on an iphone 4, but every time I try to install, it says the configuration profile cannot be installed on device. When I look at the console, there doesn't really appear to be any type of error that stands out. Why would this keep failing to install for. It's the 3.6 version on a 6.0 IOS This apple stuff is such a pain?
Here is the log after trying to install the profile.
Oct 11 07:42:14 iPhone mc_mobile_tunnel[851] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
Oct 11 07:42:14 iPhone mc_mobile_tunnel[851] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
Oct 11 07:42:21 iphone backboardd[52] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Oct 11 07:42:21 iPhone kernel[0] <Debug>: set_crc_notification_state 0
Oct 11 07:42:21 iPhone backboardd[52] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
Oct 11 07:42:21 iPhone backboardd[52] <Notice>: MultitouchHID: device bootloaded
Oct 11 07:42:21 iPhone backboardd[52] <Notice>: MultitouchHID: detection mode: 0->0
Oct 11 07:42:22 iPhone kernel[0] <Debug>: ALS: AppleARMBacklight::handleMessageGated - framebufferState -> 1
Oct 11 07:42:22 iPhone kernel[0] <Debug>: ALS: AppleARMBacklight::setBacklightEnableGated 1 (set level to 0x624)
Oct 11 07:42:25 iPhone UserEventAgent[13] <Error>: LockStateNotifier aksNotificationCallback posting notification: com.apple.mobile.keybagd.lock_status
Oct 11 07:42:25 iPhone kernel[0] <Debug>: AppleKeyStore:cp_key_store_action(1)
Oct 11 07:42:25 iPhone kernel[0] <Debug>: AppleKeyStore:Sending lock change
Oct 11 07:42:26 iPhone profiled[853] <Notice>: (Note ) profiled: Service starting...
Oct 11 07:42:26 iPhone com.apple.misd[854] <Notice>: allowing special port forwarding for test fixtures
Oct 11 07:42:30 iPhone com.apple.misd[854] <Notice>: gave up asking CommCenter, entitlement returned is unknown
Oct 11 07:42:38 iPhone lockdownd[29] <Notice>: 2fe93000 _receive_message: walk away - non-SSL 1
Thanks for you help.

What app?
On what device (model and iOS)?

IOS Application "Failed to Install" -- Air 3.0

I'm having the hardest time getting iOS applications to install on my iPhone. Every time I build my application it trys to install it on the device before coming back to say 'failed to install' on the phone.
I tried pulling out all the code related issues and started a brand new Hello World project with one label in it. I managed to get that to install once, but then it failed after that every single time.
NOTE: I'm running this on a windows machine, as I don't have funding to purchase a mac box
Here's the steps I took:
1. Got a cert request from OpenSSL
2. Uploaded the request to the provisioning portal
3. Downloaded the actual cert
4. Used OpenSSL to convert the cert to a .PEM
5. Used OpenSSL to convert the .PEM to a .P12
6. Added my device UDID to the provisioning portal
7. Added my application id to the provisioning portal
8. Got a provisioning file for that setup
9. Built my application using the provisioning file and cert
10. Copied the provisioning file to iTunes
11. Copied the application to iTunes
12. Synced the phone, it tries to install, and then the phone states 'HelloWorld failed to install' and removes the icon from the desktop
I have no idea what I'm doing wrong here. I'm going to try using my coworkers mac to build a cert on his machine instead and utilize that but I doubt that will resolve the issue.
I haven't touched anything in the application descriptor at all, except for setting the applicationId to my application profile on the provisioning portal (as it won't build without that)

Hey Neo,
I believe I've been having the same problem as this, I even created my own thread not having found this one.
I very much did have my resources folder directly under source but have now moved it to be on the same level as source
i.e.
Project
- src
- resources
instead of
Protect
- src
- resources
But it's still have the Failed to Install problem. Is my project structure still incorrect with this or do I have to start another project and do it all again? It almost seems as doing it once corrupts the entire project.
Thanks
Aaron

Premiere Pro fails to install

Premiere Pro fails to install as a trial or as a coud app. Here is the error code that I receive.
PLEASE HELP!!!!!!!
Exit Code: 34 -------------------------------------- Summary -------------------------------------- - 1 fatal error(s), 0 error(s), 0 warning(s) FATAL: Payload '{A189C479-C7CD-4E08-8CCF-D999B68C0C71} Camera Profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.2.5.0' information not found in Media_db. -------------------------------------------------------------------------------------
System Requirements

Unfortunately Exit Code 34 does not provide much information. I would recommend you begin investigating your difficulties by utilizing the Adobe Support Advisor - http://www.adobe.com/support/loganalyzer/ to review your installation logs.
Alternately you can review your installation logs manually by following the steps listed in Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

IOS app fails to install on iPod touch using flash professional cs5.5

I am having trouble testing apps on my 3rd generation iPod touch. The very first app I tried to put on there worked, the app was called mynewapp. Then I tried to put another app on there using the same provisional profile and same app id, the app failed to install. It didn’t matter if mynewapp was on my iPod touch or not. No matter what app I tried to put on my iPod touch they all failed to install, the only one I could get on there was mynewapp. I even created an app with the exact same code as mynewapp and this new app failed to install.
Then I created a new provisional profile using the same app id that my first profile was using. I tried putting an app using the new provisional profile this app failed to install for the second time. The first time it was using the old profile.
Then I created a new provisional profile with a new app id and I took an app and tied it to this new profile and app id this app seemed to install on the iPod touch. Right now only two apps can be installed on my iPod touch each app is using a different profile and app id. If I were to copy one of these apps and use the copy that was just created to replace the old version on my iPod touch the app would failed to install.
I have spent over a week trying just about everything to fix this problem. I remember reading that multiple apps can have the same app id.
I’m using a windows 7 64 bit computer with flash professional 5.5. Furthermore iTunes, Flash pro, AIR and my iPod touch are all up-to-date.
What could be the problem?
I’m sorry if this seems so long it is just I have tried many different things.

As Colin says make sure your device is still supported by the newer AIR.
Here's a page which you can check
http://www.adobe.com/products/air/tech-specs.html
Adobe stopped supporting older devices (after AIR 2.5 i think), so you can either re compile it with the older AIR or else move onto a newer device. Had the same issue with an iPhone 3g which no longer works.

Failed to install IsKernel Files

Hi everybody,
I am trying t install BBDM ver 4.2 on my PC(OS Win Vista Home basic SP1), but its giving me the err:
1: Failed to install IsKernal Files. Make sure you have appropriate privileges on this machine..
How can I sort this problem? Plz. help.
Regards,
Kanak Sony
http://dodevelopnshare.wordpress.com/ | http://www.linkedin.com/profile/view?id=188131481&trk=tab_pro
Solved!
Go to Solution.

I got the solution for above, by disabling UAC in User Accounts. Rebooted the PC, and re-started the installation and it worked.
Regards,
Kanak Sony
http://dodevelopnshare.wordpress.com/ | http://www.linkedin.com/profile/view?id=188131481&trk=tab_pro

Failed to Install in iOS

I'm trying to run and/or debug the app I'm working on on my iPhone. I've gone through the process of getting the certificate and provisioning file and all appears to be well with both files. After setting up the run configuration Flex built the app and created the .ipa file in the bin-debug folder. I added the provisioning file and the app to iTunes and synced with my phone. In iTunes, the sync appears to work flawlessly but when watching the phone, the app almost completes installation then disappears and the error "app-name Failed To Install" pops up.
Any ideas what could be causing this? Any help would be appreciated, thanks.
Scott

Looking at this thread today because just had a similar issue.
We have an iPad eBook, and we thought we'd whack it onto an iPhone to see what it looks like on that. We'd like to release onto iPhone, but will need to make some changes. Would be nice to see what it looks like on the phone as-is so that we know how much we're going to have to change.
So the steps I took were:
1) Set device type to iPhone under publish settings.
2) Rebuilt app.
3) Plugged iPhone into my PC.
4) Tried to put app onto iPhone but no luck because it's a different iTunes account (it's my friend's phone) and syncing would remove all his apps and put on all my apps. Thinking about it now, perhaps we could have logged in with his account?
5) So we plugged the iPhone into his Mac laptop and copied .ipa file over to his desktop. I dragged it into his itunes, so far so good.
6) But then we clicked it in iTunes (so it's checkbox is selected) and then did a sync. It started to install, and then came up with a dialog box on the iPhone saying "AppName failed to install."
We tried this a few times but no luck.
Now, I'm guess that I should have built a new provisioning profile with that device listed as one of the authorised devices?
If so, every time you want to try on a new device, you have to do the whole provisioning certificate thing again and rebuild the app against the new certificate/profile? This seems like a lot of work.
Also, some people have mentioned installing the provisioning profile on the device, how would one go about doing that?

Run root.sh failed after install grid

i installed grid,and run root.sh to configure the cluster,it took more than 12 hours,finally get the fail report
anybody can help?
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= grid
ORACLE_HOME= /opt/oracle/app/11.2.0/grid
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2011-05-18 23:42:50: Parsing the host name
2011-05-18 23:42:50: Checking for super user privileges
2011-05-18 23:42:50: User has super user privileges
Using configuration parameter file: /opt/oracle/app/11.2.0/grid/crs/install/crsc
onfig_params
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
　pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
ADVM/ACFS is not supported on centos-release-5-6.el5.centos.1
CRS-2672: Attempting to start 'ora.gipcd' on 'rac1-pub'
CRS-2672: Attempting to start 'ora.mdnsd' on 'rac1-pub'
CRS-2676: Start of 'ora.mdnsd' on 'rac1-pub' succeeded
CRS-2676: Start of 'ora.gipcd' on 'rac1-pub' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'rac1-pub'
CRS-2676: Start of 'ora.gpnpd' on 'rac1-pub' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'rac1-pub'
CRS-2676: Start of 'ora.cssdmonitor' on 'rac1-pub' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'rac1-pub'
CRS-2672: Attempting to start 'ora.diskmon' on 'rac1-pub'
CRS-2676: Start of 'ora.diskmon' on 'rac1-pub' succeeded
CRS-2676: Start of 'ora.cssd' on 'rac1-pub' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'rac1-pub'
CRS-2676: Start of 'ora.ctssd' on 'rac1-pub' succeeded
ASM created and started successfully.
DiskGroup MyDG created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
CRS-2672: Attempting to start 'ora.crsd' on 'rac1-pub'
CRS-2676: Start of 'ora.crsd' on 'rac1-pub' succeeded
CRS-4256: Updating the profile
Successful addition of voting disk 83a7a20dc30f4f62bf5fc4e4a7a18567.
Successful addition of voting disk a8df71f68dbf4f22bf09f68aaa04de47.
Successful addition of voting disk 60cec6ca14524fdabf777568d967b5d4.
Successfully replaced voting disk group with +MyDG.
CRS-4256: Updating the profile
Failed to update the profile with the new discovery string
CRS-4000: Command Replace failed, or completed with errors.
Command return code of 1 (256) from command: /opt/oracle/app/11.2.0/grid/bin/crsctl replace votedisk +MyDG
Voting file add failed
Unable to communicate with the Cluster Synchronization Services daemon.
CRS-4639: Could not contact Oracle High Availability Services
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /opt/oracle/app/11.2.0/grid/bin/crsctl stop resource ora.crsd -init
Stop of resource "ora.crsd -init" failed
Failed to stop CRSD
CRS-4639: Could not contact Oracle High Availability Services
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /opt/oracle/app/11.2.0/grid/bin/crsctl stop resource ora.asm -init
Stop of resource "ora.asm -init" failed
Failed to stop ASM
CRS-4639: Could not contact Oracle High Availability Services
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /opt/oracle/app/11.2.0/grid/bin/crsctl stop resource ora.ctssd -init
Stop of resource "ora.ctssd -init" failed
Failed to stop OCTSSD
Initial cluster configuration failed. See /opt/oracle/app/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_rac1-pub.log for details
=======================
and infor from /opt/oracle/app/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_rac1-pub.log
2011-05-18 23:43:17: Registering ohasd
2011-05-18 23:43:17: init file = /opt/oracle/app/11.2.0/grid/crs/init/init.ohasd
2011-05-18 23:43:17: Copying file /opt/oracle/app/11.2.0/grid/crs/init/init.ohasd to /etc/init.d directory
2011-05-18 23:43:17: Setting init.ohasd permission in /etc/init.d directory
2011-05-18 23:43:17: init file = /opt/oracle/app/11.2.0/grid/crs/init/ohasd
2011-05-18 23:43:17: Copying file /opt/oracle/app/11.2.0/grid/crs/init/ohasd to /etc/init.d directory
2011-05-18 23:43:17: Setting ohasd permission in /etc/init.d directory
2011-05-18 23:43:17: Removing "/etc/rc.d/rc3.d/S96ohasd"
2011-05-18 23:43:17: Removing file /etc/rc.d/rc3.d/S96ohasd
2011-05-18 23:43:17: Failure with return code 1 from command rm /etc/rc.d/rc3.d/S96ohasd
2011-05-18 23:43:17: Failed to remove file:
2011-05-18 23:43:17: Creating a link "/etc/rc.d/rc3.d/S96ohasd" pointing to /etc/init.d/ohasd
2011-05-18 23:43:17: Removing "/etc/rc.d/rc5.d/S96ohasd"
2011-05-18 23:43:17: Removing file /etc/rc.d/rc5.d/S96ohasd
2011-05-18 23:43:17: Failure with return code 1 from command rm /etc/rc.d/rc5.d/S96ohasd
2011-05-18 23:43:17: Failed to remove file:
2011-05-18 23:43:17: Creating a link "/etc/rc.d/rc5.d/S96ohasd" pointing to /etc/init.d/ohasd
2011-05-18 23:43:17: Removing "/etc/rc.d/rc0.d/K19ohasd"
2011-05-18 23:43:17: Removing file /etc/rc.d/rc0.d/K19ohasd
2011-05-18 23:43:17: Failure with return code 1 from command rm /etc/rc.d/rc0.d/K19ohasd
2011-05-18 23:43:17: Failed to remove file:
2011-05-18 23:43:17: Creating a link "/etc/rc.d/rc0.d/K19ohasd" pointing to /etc/init.d/ohasd
2011-05-18 23:43:17: Removing "/etc/rc.d/rc1.d/K19ohasd"
2011-05-18 23:43:17: Removing file /etc/rc.d/rc1.d/K19ohasd
2011-05-18 23:43:17: Failure with return code 1 from command rm /etc/rc.d/rc1.d/K19ohasd
2011-05-18 23:43:17: Failed to remove file:
2011-05-18 23:43:17: Creating a link "/etc/rc.d/rc1.d/K19ohasd" pointing to /etc/init.d/ohasd
2011-05-18 23:43:17: Removing "/etc/rc.d/rc2.d/K19ohasd"
2011-05-18 23:43:17: Removing file /etc/rc.d/rc2.d/K19ohasd
2011-05-18 23:43:17: Failure with return code 1 from command rm /etc/rc.d/rc2.d/K19ohasd
2011-05-18 23:43:17: Failed to remove file:
2011-05-18 23:43:17: Creating a link "/etc/rc.d/rc2.d/K19ohasd" pointing to /etc/init.d/ohasd
2011-05-18 23:43:17: Removing "/etc/rc.d/rc4.d/K19ohasd"
2011-05-18 23:43:17: Removing file /etc/rc.d/rc4.d/K19ohasd
2011-05-18 23:43:17: Failure with return code 1 from command rm /etc/rc.d/rc4.d/K19ohasd
2011-05-18 23:43:17: Failed to remove file:
2011-05-18 23:43:17: Creating a link "/etc/rc.d/rc4.d/K19ohasd" pointing to /etc/init.d/ohasd
2011-05-18 23:43:17: Removing "/etc/rc.d/rc6.d/K19ohasd"
2011-05-18 23:43:17: Removing file /etc/rc.d/rc6.d/K19ohasd
2011-05-18 23:43:17: Failure with return code 1 from command rm /etc/rc.d/rc6.d/K19ohasd
2011-05-18 23:43:17: Failed to remove file:
2011-05-18 23:43:17: Creating a link "/etc/rc.d/rc6.d/K19ohasd" pointing to /etc/init.d/ohasd
2011-05-18 23:43:17: The file ohasd has been successfully linked to the RC directories
2011-05-18 23:43:17: Starting ohasd
2011-05-18 23:43:17: itab entries=
2011-05-18 23:43:22: Created backup /etc/inittab.no_crs
2011-05-18 23:43:22: Appending to /etc/inittab.tmp:
2011-05-18 23:43:22: h1:35:respawn:/etc/init.d/init.ohasd run >/dev/null 2>&1 </dev/null
2011-05-18 23:43:22: Done updating /etc/inittab.tmp
2011-05-18 23:43:22: Saved /etc/inittab.crs
2011-05-18 23:43:22: Installed new /etc/inittab
2011-05-18 23:43:27: ohasd is starting
2011-05-18 23:43:27: Checking ohasd
2011-05-18 23:43:27: ohasd started successfully
2011-05-18 23:43:27: Creating CRS resources and dependencies
2011-05-18 23:43:27: Configuring HASD
2011-05-18 23:43:27: Registering type ora.daemon.type
2011-05-18 23:43:28: Registering type ora.mdns.type
2011-05-18 23:43:28: Registering type ora.gpnp.type
2011-05-18 23:43:29: Registering type ora.gipc.type
2011-05-18 23:43:29: Registering type ora.cssd.type
2011-05-18 23:43:30: Registering type ora.cssdmonitor.type
2011-05-18 23:43:30: Registering type ora.crs.type
2011-05-18 23:43:31: Registering type ora.evm.type
2011-05-18 23:43:31: Registering type ora.ctss.type
2011-05-18 23:43:31: Registering type ora.asm.type
2011-05-18 23:43:32: Registering type ora.drivers.acfs.type
2011-05-18 23:43:32: Registering type ora.diskmon.type
2011-05-18 23:43:35: ADVM/ACFS is not supported on centos-release-5-6.el5.centos.1
2011-05-18 23:43:35: ADVM/ACFS is not configured
2011-05-18 23:43:35: Successfully created CRS resources for cluster daemon and ASM
2011-05-18 23:43:35: Checking if initial configuration has been performed
2011-05-18 23:43:35: Starting CSS in exclusive mode
2011-05-18 23:44:13: CRS-2672: Attempting to start 'ora.gipcd' on 'rac1-pub'
2011-05-18 23:44:13: CRS-2672: Attempting to start 'ora.mdnsd' on 'rac1-pub'
2011-05-18 23:44:13: CRS-2676: Start of 'ora.mdnsd' on 'rac1-pub' succeeded
2011-05-18 23:44:13: CRS-2676: Start of 'ora.gipcd' on 'rac1-pub' succeeded
2011-05-18 23:44:13: CRS-2672: Attempting to start 'ora.gpnpd' on 'rac1-pub'
2011-05-18 23:44:13: CRS-2676: Start of 'ora.gpnpd' on 'rac1-pub' succeeded
2011-05-18 23:44:13: CRS-2672: Attempting to start 'ora.cssdmonitor' on 'rac1-pub'
2011-05-18 23:44:13: CRS-2676: Start of 'ora.cssdmonitor' on 'rac1-pub' succeeded
2011-05-18 23:44:13: CRS-2672: Attempting to start 'ora.cssd' on 'rac1-pub'
2011-05-18 23:44:13: CRS-2672: Attempting to start 'ora.diskmon' on 'rac1-pub'
2011-05-18 23:44:13: CRS-2676: Start of 'ora.diskmon' on 'rac1-pub' succeeded
2011-05-18 23:44:13: CRS-2676: Start of 'ora.cssd' on 'rac1-pub' succeeded
2011-05-18 23:44:13: Querying for existing CSS voting disks
2011-05-18 23:44:13: Performing initial configuration for cluster
2011-05-18 23:44:14: Start of resource "ora.ctssd -init" Succeeded
2011-05-18 23:44:15: Configuring ASM via ASMCA
2011-05-18 23:44:15: Executing as grid: /opt/oracle/app/11.2.0/grid/bin/asmca -silent -diskGroupName MyDG -diskList /dev/oracleasm/disks/DISK1,/dev/oracleasm/disks/DISK2,/dev/oracleasm/disks/DISK3 -redundancy NORMAL -diskString '/dev/oracleasm/disks/*' -configureLocalASM
2011-05-18 23:44:15: Running as user grid: /opt/oracle/app/11.2.0/grid/bin/asmca -silent -diskGroupName MyDG -diskList /dev/oracleasm/disks/DISK1,/dev/oracleasm/disks/DISK2,/dev/oracleasm/disks/DISK3 -redundancy NORMAL -diskString '/dev/oracleasm/disks/*' -configureLocalASM
2011-05-18 23:44:15: Invoking "/opt/oracle/app/11.2.0/grid/bin/asmca -silent -diskGroupName MyDG -diskList /dev/oracleasm/disks/DISK1,/dev/oracleasm/disks/DISK2,/dev/oracleasm/disks/DISK3 -redundancy NORMAL -diskString '/dev/oracleasm/disks/*' -configureLocalASM" as user "grid"
2011-05-18 23:47:27: Creating or upgrading OCR keys
2011-05-18 23:47:46: OCR keys are successfully populated
2011-05-18 23:47:46: Invalidating repository location for Oracle 9i deployments
2011-05-18 23:47:46: Executing clscfg
2011-05-18 23:47:53: Oracle Cluster Registry initialization completed
2011-05-18 23:47:59: Start of resource "ora.crsd -init" Succeeded
2011-05-18 23:47:59: Creating voting files
2011-05-18 23:47:59: Creating voting files in ASM diskgroup MyDG
2011-05-18 23:47:59: Executing crsctl replace votedisk +MyDG
2011-05-19 11:04:19: Command return code of 1 (256) from command: /opt/oracle/app/11.2.0/grid/bin/crsctl replace votedisk +MyDG
2011-05-19 11:20:24: Voting file add failed
2011-05-19 11:54:33: Exiting exclusive mode
2011-05-19 12:11:11: Command return code of 1 (256) from command: /opt/oracle/app/11.2.0/grid/bin/crsctl stop resource ora.crsd -init
2011-05-19 12:13:15: Stop of resource "ora.crsd -init" failed
2011-05-19 12:15:12: Failed to stop CRSD
2011-05-19 12:20:52: Command return code of 1 (256) from command: /opt/oracle/app/11.2.0/grid/bin/crsctl stop resource ora.asm -init
2011-05-19 12:20:55: Stop of resource "ora.asm -init" failed
2011-05-19 12:20:55: Failed to stop ASM
2011-05-19 12:23:59: Command return code of 1 (256) from command: /opt/oracle/app/11.2.0/grid/bin/crsctl stop resource ora.ctssd -init
2011-05-19 12:24:05: Stop of resource "ora.ctssd -init" failed
2011-05-19 12:24:05: Failed to stop OCTSSD
2011-05-19 12:36:49: Initial cluster configuration failed. See /opt/oracle/app/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_rac1-pub.log for details

Hi,
sounds like a security/firewall problem.
Because if during the configuration something is not "acting" it's mostly because packages are not delivered/recieved and "hang" instead of delivering error messages.
To make sure deactivate any firewall, and if this is linux deactivate SE Linux.
Next time please specify version and OS you encounter the error. This would make it easier to help you...
Regards
Sebastian

Itunes sync 'AppName' failed to install.

I dont understand why i get this sometimes when trying to sync an app to my device (message shows on device itself)
certain provisioning profiles just dont work. I will usually fumble around, creating new ones until i get one to work.
The latest attempt:
I created the provisioning profile on the iOS developer site.
I included 2 udids.
downloaded
I created the app, it works on one device, but not the other
itunes sync 'AppName' failed to install.
ok, let me test again, so i go create a new profile for just one UDID (the UDID that was working a moment ago)
itunes sync 'AppName' failed to install.
What!!! WHY!
Its like some profiles are corrupt or something? What can i be missing here?
for one example, both udids are in the profile, why would the .ipa install on one, but not the other?
(installing from 2 different comptuers)

Any suggestions you can think of? I have now lost all ability to test the app even on my own device. It seems to provisioning profiles are the cause?
with itunes, the device itself gives the unhelpful error itunes sync 'AppName' failed to install.
with the iphone configuration utility, the program errors:
Could not install the application on device. Error: A valid provisioning profile for this executable was not found.
I dont understand, this has been working for months and now it does not.
When i try to install the application, the provisioning profile shows up on the device and states its valid.
I am now starting from scratch again from the iOS provisioning page, but it will not work at all this time.
desciption: [a name i put]
bundleSeedID(app id prefix)
i have only a choice of two or "team id"
budle identifier (app id suffix)
i had always used the wild card *
this worked in the past, now i have tried creating provisioning profiles this way, or with a valid name and using the same name in app id export settings in flash Ide
new profile
name myProfile
[certificate selected]
app id
[selected the app id i just made]
device selected, UDID is correct and worked for months prior
wait/refresh
download profile
create the app in flash CS5.5
app ID = anything because i used the wind card, OR exact same as app ID created in iOS page
its created successful, but fails to install on device.
Any suggestions are welcome, i am now spending hours on this its ridiculous

Windows failed to install the following update with error 0x80070005

Hi,
We are using Win Server 2008 R2 std. Server and Win 7 Professional X64 clients. During the second batch of update we got an Error while updating on one client machine and the system restoring back automatically However other clients are updating and working
fine. Then i tried to install the updates one by one manually then successfully installed all the updates except one ie. KB2862330. It keeps failing then i found an article suggest to check the update with Admin Previlage, disable Antivirus and Scan the
computer for Malware (Using MS Security Scanner and Malwarebytes). I tried both but never works. After that i got 2 batch of updates, everything is updating and trying to update this (KB2862330) and failing till date. What is the issue and why its not updating
on one machine?
Installation Failure: Windows failed to install the following update with error 0x80070005: Security Update for Windows 7 for x64-based Systems (KB2862330).
KB Article Followed : http://support.microsoft.com/kb/968003/en-us

Okay, good. The SURT shows no errors.
So now we can blame the problem exclusively on the update itself.
And yes... there are still known, ongoing issues with KB2862330.
Truly, my suggestion is to just not install it at all. Unless you've identified a known risk via a USB vector on particular systems where the vulnerability would be considered a critical risk, I'd say that the risk caused by the vulnerability is significantly
less than the risk of additional headache caused by the update itself. I have still not deployed MS13-081 to any of my systems, and frankly, I don't plan to.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

When I try to test my app the IPhone says "'%app title%' failed to install."

When I try to test my app the IPhone says " '%app title%' failed to install."
How do I fix this?
My install method is:
* Open ITunes.
* Drag my app to the IPhone.
* Ta-da the IPhone says "'%app title%' failed to instal."
Has anyone had this problem? If so how did you fix it?
Thanks!
~Jeremiah

You might have to check the prov profile and type of your certificate. The error you stated might arise in following cases.
Certificate id and app ID (in the app.xml) does not match.
The certificate and prov profile should match the cause. Distribution / Testing.
Select suitable option while packaging. Adhoc / App store distribution.
Make sure the correct device UDID was used for your certificate.
I went wrong in (2) when I built my first app which costed me the same error as yours.
I felt FB could have been more organized in this process. I felt XCODE edged over FB in this.

Profile Failed to Install

Similar Messages

Maybe you are looking for