Profile for authorizations just for reading?

Hello,
is there an already existing profile just your displaying? Like the SAP_ALL just reading?
regards
Florian

These are the various display profiles which I could find in my system.
A_ANZ                  FI-AA Asset Accounting: Complete display authorization
F_ANZ                   FI Display Authorization Model Profile
F_BKPF_KANZ      FI authorizations for displaying vendor documents
F_KREDI_BANZ     FI Auth. for Displaying Vendors (Financial Accounting Data
F_SAKO_ANZ        FI authorizations for displaying G/L accounts.
Regards
Aravind
Message was edited by:
        Aitipamula Aravind

Similar Messages

N95 profile for reading Map

I would like to create a N95 profile that does not dim the screen and does not lock the phone/keys after a certain time so that I can read the map and navigate (I have security phone/key lock on my General profile).
I thought this was possible but any security and lock changes and display settings affect all profiles not just the profile you are in, is there a way to do this ?

You did not say which version of Nokia Maps you are using. You can certainly set the backlight to stay on all the time from the settings within Nokia Maps. I cannot give you the key strokes without knowing which version you are using.
Unfortunately the keypad lock is not as simple. You can either disable it completely or do as I used to when I had an N95 which was to unslide and reslide the phone to unlock the keypad. Remember the gps anttena in under the # key on the N95 so you should have the slide open to optimise signal reception.

Just one partner profile for SAP XI?!

Hi,
well i have some thoughts concerning configuring the partner profile on sender side.
I have different systems to which e.g. IDocs will be send to. Therefore i was thinking to set one partner profile for each connected system.
But on the other hand it is also possible to just configure one partner profile, e.g. called SAP XI, and seperate the different IDocs inside this partner profile because of different Message-Types of the Outb-parameters, and inside this because of the IDoc-Type.
So what is the most propriate way to solve this, is there a suggestion by SAP?!
thx in advance, Jens

Hey guys,
Just thought I'd add my experiences here.
In one of our implementations we created partner profiles with respect to XI. We had multiple source systems , but the Target ECC team was like, we do not care who sends the data to XI, as far as we are concerned we get data from XI. So we create only one partner profile. We agreed to this and so all Idoc's posting from XI had the XI as the sender partner name. The project went into production and things were fine.
Then comes the next release. And what do we realise, that the same Idoc will not be posted from XI but for different source systems with different formats. The Inbound processing for the idoc was also being changed stating that Idoc from Source system A needs to be processed with this T code and Idoc's from System B with this code. reason was different bsuiness rules across different geographies.
Now, at this juncture we realised in vain that it would have been better had we maintained the partner profiles with respect to the End Systems . having it with respect to XI caused issues in the fact that we are unableto trace out which Idoc belonged to which system.
Since, then we always recommend all partner profiles with respect to End Systems and not with respect to XI. Helps the business also understand how many idoc's were posted for which source system and so on.
Just my 2 cents and experience here. Would love to heard more on this topic as well.
Regards
Bhavesh

Create Display Authorization Profile for SAP Transaction SPRO (IMG).

Dear All,
In my current implementation project there is an requirement to create display authorization profile for SPRO. I have tried a lot but was not able to do so.
Any one is having an experience in creating display profile for SPRO (IMG) ? If any one has worked on this issue then please guide me.
Thanks,
Avinash

Hi
This is security related question. I am not security expert.
But you can check this, Include the following authorization objects in the profile and assign this profile to the target user.
S_IMG_ACTV
S_PROJECT
S_PROJ_AUT
S_PRO_AUTH
and assign activity = 03 (Display).
Hoipe it helps.
regards
Srinivas

How to create mandatory (read-only) profile for Terminal Services user (HP Thin Client) on Server2003... aaarrgghhh!

I've been tearing my hair out for a couple of days now...
I'm trying to create a mandatory profile for users logging in from hp thin clients on a 2003 server at a school.
I've set up a prototype user, then copied the proto user's NTUSER.DAT to NTUSER.MAN and renamed
NTUSER.DAT to NTUSER.DAT_unused.
At that point, logging in as the prototype user looks ok. It was my understanding that renaming NTUSER.DAT to NTUSER.MAN would make it a mandatory profile, and the user (in this case the proto user) would be unable to change it. However, in this
case the user can still modify the desktop and those modifications are preserved across logins. The NTUSER.MAN file is being updated, judging by the timestamp changes.
What am I missing?
I've tried putting the NTUSER.MAN in the user's dir on the server
(C:\Documents and Settings\ProtoUser),
in the DefaultUser, and in AllUsers.
Right now I'm getting a default, unmodifiable profile which I have no idea where it comes from.
In case it matters, the original user and directory tree from which the NTUSER.MAN I'm trying to use has been deleted, but I wouldn't think that should matter.
For example, I have the option to not show the security tab set in the group policy, but it is showing up.
The Start menu is showing as the classic start menu, and I had it set for the "new" (2 column) one.
I've got hide network places on the desktop set, but it's showing up.
Is there a way to tell where a profile is coming from?
I'm pretty confused at this point; any clarifications / tips would be much appreciated.
Related questions:
If both an NTUSER.DAT and an NTUSER.MAN exist, which is used?
If no profile is found for a user in the normal place, what happens?

Hi,
Thank you for posting in Windows Server Forum.
A mandatory user profile is a special type of pre-configured roaming user profile that administrators can use to specify settings for users. With mandatory user profiles, a user can modify his or her desktop, but the changes are not saved when the user
logs off. The next time the user logs on, the mandatory user profile created by the administrator is downloaded. There are two types of mandatory profiles: normal mandatory profiles and super-mandatory profiles.
User profiles become mandatory profiles when the administrator renames the NTuser.dat file (the registry hive) on the server to NTuser.man. The .man extension causes the user profile to be a read-only profile.
User profiles become super-mandatory when the folder name of the profile path ends in .man; for example, \\server\share\mandatoryprofile.man\.
More information:
Mandatory User Profiles
http://msdn.microsoft.com/en-us/library/windows/desktop/bb776895(v=vs.85).aspx
Using User Profiles in Windows Server 2003
http://technet.microsoft.com/en-us/library/cc776120(v=ws.10).aspx
Hope it helps!
Thanks.
Dharmesh Solanki

Special authorization need for read cluster table??

In one report, I use following coding to read information from RFDT table:
form get_f110_parm .
f110id-laufd   = p_laufd.
f110id-laufi   = p_laufi.
f110versionpar = space.
clear:   buktab, fkttab, slktab, sldtab, trctab, usrtab,
           faetab, jobtab, f110v, f110c, trcopt, f110versionpar.
import buktab fkttab slktab sldtab trctab usrtab
         faetab jobtab f110c trcopt f110versionpar
         from database rfdt(fb) id f110id
         accepting padding.
endform.                    " GET_F110_PARM
I can fill F110c, trcopt and f110versionpar by this program. But there is no entry in table like fkttab, usrtab.
Is there any authorization need for read cluster table??
Thanks in advance.
Edited by: Amy Xie on Dec 21, 2010 10:41 AM

Hello,
After you run your code, check transaction SU53 to see if any authorization check failed.

Authorization profiles for ISA, WebIC, & PCUI

Hi All,
Can anybody recommend a source of information for developing the authorization profiles needed to get the correct user authorization profiles for ISA, WebIC and PCUI ?
Regards,
Verdere

Thanks for replying Mark.
I know only of transaction SU53 for Authorization Trace.
But since this error is coming in webshop, i cant use SU53.
Is there an alternative way to do authorization Trace in Webshop, then please suggest.
Regards,
Rahul

IOS 6.1.4 released for iPhone 5 Adds an Updated Audio Profile for Speakerphone

Apple has just released an Over the Air update for the iPhone 5. It seems to only provide an updated audio profile for the speaker phone. Nothing else listed in the change log.
I would assume that there will be an iTunes downloadable update available shortly.

It obviously is because you didnt understand. The iphone 4's last update to IOS 6.1.3 in some cases caused the phones speakers to not work (in which this happened to mine and a few people I know) which some people got rid of their phones. HENCE the AUDIO UPDATE that they recently posted but only iPhone 5 can download the update. That is my problem. I have alot of apple products diesel vdub and have had apple for a long time but I can't seem to understand why they would do this and I posted this in hopes to find more people that have had this issue and if they did anything to help fix it this issue. Thank you for your concern though.

How to use the same Windows-Profile for over 700 Users?

Dear admins,
i´d like to use one (1!) shared windows profile to serv over 700 user-accounts in our school. But there is a little complication in the WGM.
I just tried to check all users and entered the path of the shared profile right in the windows tab.
For example \\Server\Profiles\oneforallprofile
Unfortunately the WGM put the user´s shortname behind this path.
For example: \\Server\Profiles\oneforallprofile\mistersmith
or \\Server\Profiles\oneforallprofile\sallymiller and so on.
By changing this preference one by one it works, but of course i need a solution to do that for all users.
Does anyone know how to set one Profile for all students?
Thanks for your help!
Rolf
XServe G5 Mac OS X (10.4.5) Educational System Administrator

Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan.

How to set up multiple profiles for an Express?

My wife is visiting her mother for a couple weeks and the idea is for her to take one of our Expresses with her so she can use wifi while she's there. I was told that the best way to do this is to set up a second profile for 'Travel' on the Express that she'll be taking with her, so she can use that, and not have to change the settings we have for it at home.
I can't figure out how to do this. Anybody know?
Thanks!!

Meetoo wrote:
Not much. But there isn't that much to know I wouldn't think. All there is is her mother's PC, which is hooked up online via some kind of modem. That's it. Think 1995, except high speed I guess.
I'm sending my wife there armed with two ethernet cables, a netgear ethernet switcher, and an Express. I was hoping that she could just plug the express into the switcher, find it in the airport utility, and do the 'create a wireless network' option, and hopefully it would guide her through it. Do you think it'll be that easy, or are there problems ahead for her?
What do you propose that she connect the "Netgear Ethernet switcher" to? She can't connect the switch directly to that modem unless the modem has router functionality. If she connects the Express to that modem, how the Express needs to be configured depends on whether the mother has (a) cable service or DSL service with the modem handling the sign-on (PPPoE connection) on one hand or (b) she has DSL service with a "downstream" device (in this case her computer) handling the sign-on. If this arrangement would work, there's no available Ethernet port on the Express to use to connect the mother's computer, so unless that computer has wireless capability, it would be offline.
It would help if you could learn what ISP the mother is using and what modem (brand and model) is involved.

Do I need to set AI colour profiles for use in ID?

My previous set up:
Mac
CS2 (Illustrator, Photoshop, Bridge)
Quark XPress 7
My new set up:
PC (Win 7)
CS5 (Illustrator, Photoshop, Bridge, InDesign)
My problem:
I work for a company that prints newspapers, but my dept also does work for glossy sheetfed printers (magazines leaflets etc)
All my work is exclusively CMYK.
With my previous set up - I didn’t want to have to switch my colour profiles via Bridge as I was constantly juggling two types of jobs:
Our tabloid press - Profile - ISOnewspaper26v4 (CMYK)
Sheetfed Printers - Profile - ISO Coated V2 (Fogra 39) (CMYK)
So I set my CS2 Suite colour settings to ISO Coated V2 (Fogra 39) and set an action in Photoshop to convert jpegs / eps photos to ISOnewspaper26v4.
So my CS2 working space was set for Sheetfed glossy publications and if I wanted to set a picture to the correct profile for newsprint I just had to open the picture and hit the action that applied the ISOnewspaper26v4 profile.
Regarding Quark – I set up separate templates for each type of job:
One for Profile - ISO Coated V2 (Fogra 39) and one for - Profile - ISOnewspaper26v4.
Regarding Illustrator - I found that Quark 7 didn’t differentiate between Illustrator colour profiles, or if it did, it didn’t show up in ‘Usage’.
If I went to Quark Usage and went to ‘Profiles’ it only listed the Quark profile and any Photoshop profiles, not any Illustrator profiles.
So in Illustrator I just set colour profiles to ‘do not colour manage this document’. So that I only had to worry about changing profiles for Photoshop jpegs / eps’s.
So I had a good little system going that served me well and now my company decided to move us to PC’s and CS5; and I still have the same problem – juggling newsprint jobs and glossy magazine jobs and not wanting to have to synchronise my CS suite colour settings every time I switch between jobs...
So I was hoping to stick with my little system on PC / CS5.
So basically my question is, do I need to worry about Illustrator colour profiles if I am bringing Illustrator files into InDesign? (To clarify, my Illustrator files are always pure vector, so there is no chance of some rogue RGB jpeg sneaking through on a Illustrator file)
Im open to suggestions regarding my set up, but really would prefer not to have to keep switching my colour profiles.
Any help would be greatly appreciated.

First, I wasn't suggesting that your PDFs be exported to RGB, but it is a common workflow these days to keep photos in RGB until you convert them to the correct profile during the export process. This maximizes the potential for re-purposing your documents and allows you to use the same RGB photos for different output purposes without having to do separate CMYK conversions for each destination, so long as you don't need to do any tweaking after the conversion.
And to answer your question, if the .ai files have no embedded color profile they will ALWAYS be considered to use whatever the CMYK working space is in your ID file, so the numbers will be preserved. This means that there will be slight differences in color on output on different devices (the whole point of color management, after all, is to preserve the appearance of colors by altering the numbers for the output device).
Does the vector work you get from Thinstock come with an embedded profile? Is there any color that is critical for matching, such as a corporate color (which should be spot, but that's a different discussion), or do you use the same art in both the newspaper and magazine, and does the client expect a match (which we know isn't going to happen anyway)?
If there's no embedded profile when you start, there's no way to know what the color was supposed to look like, so color management is not possible, really. You can assign a profile, but you'd be guessing. Since the correct appearance at that point is unknown continuing with out color management shouldn't present a problem. The only case where you would need to manage the vector art would be if the color APPEARANCE is critical or you need it to match across different outputs, and in that case you would need to assign a profile and allow ID to preserve the profile on import and remap the numbers, which means you would likely get rich blacks someplace. Since it's unlikely that you can get a good match going from glossy to newsprint, I probably wouldn't even try -- you wouldn't want, for example, to tag the art as newsprint, and have it print subdued on the gloss if it would look better or more correct with the other profile. Color management would be much more useful if you were going from sheetfed to web on the same stock.

Windows cannot load the user's profile but has logged you on with the default profile for the system.

My Windows 7 crashed a couple days ago after a windows update, I got this message.
Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
I restarted the machine and got this message
Windows was unable to load the registry. This problem is often caused by insufficient memory or insufficient security rights.
DETAIL - The process cannot access the file because it is being used by another process. for C:\Users\TEMP\ntuser.dat
I checked the event Log I found these .
Windows cannot load the user's profile but has logged you on with the default profile for the system.
DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
Windows has backed up this user profile. Windows will automatically try to use the backup profile the next time this user logs on.
Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt local profile.
DETAIL - The process cannot access the file because it is being used by another process.
This is the first error in the event viewer after a successful logon
The description for Event ID 34 from source ccSvcHst cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
ccSetMgr
Windows cannot load the user's profile but has logged you on with the default profile for the system.
DETAIL - Access is denied.
Looking at the Logs all I can tell is that after the Desktop Window Manager started if caused this error.
The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
then this one
The Desktop Window Manager has exited with code (0x40010004)
Then this before it shutdown.
The User Profile Service has stopped.
I started up the PC and the first message I got was
How can I get access to my user profile? do I need to createa new Administrator account? Please help
The EventSystem sub system is suppressing duplicate event log entries for a duration of 86400 seconds. The suppression timeout can be controlled by a REG_DWORD value named SuppressDuplicateDuration under the following registry key: HKLM\Software\Microsoft\EventSystem\EventLog.

hi do the following
1. In Search programs and files (Windows 7) area, type in regedit, and press Enter.
2. If prompted click yes,
3. expand the following HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
4. click the sid that related to your admin profile (if you not sure, click each sid and in turn look to the right hand side of registry editor it will show who that sid is related to one of the registry files should hae in description localhost\admin or
something similair)
5. right click the sid and press delete.
6. restart your machine and log back on with the admin account, this will then rebuild the admin profile... dont worry when it loads and none of your personal settings are saved or files or folders... go to c:\users
in here you will see two folders for the admin account, one will be just admin and the other most likely admin.localhost
i cant remember which one is which but just check both, one will still have all your files and folders in it.
i suggest making a backup of your data before doing this incase something does go wrong, but ive had this happen many times in a domain enviorment and has worked for me everytime.

Is there a lens profile for Samyang 14mm and Canon 5D2 ?

Hi !
I'm thinking about buying a new Samyang / Rokinon / Bower etc 14mm wide angle full frame lens.
However, this lens has bad moustache distortion on stills images - not good for architecture.
Is there an Adobe lens profile for Adobe Camera Raw (Photoshop CS6 Bridge) for full frame Canon 5D2 / 3 or 1Ds 3 etc ?
It's needed for Mac - don't know if there is any difference.
Advice before I buy would be much appreciated ...

Yay that's great news ... and thanks for such a speedy reply.
Didn't know about the Adobe Lens Profile Downloader ... so have just downloaded it for Mac and found the lens profile.
Appreciate your help ... it'll hopefully be great for correcting the distorion i need.

Display Color Profile For iiyama HM903DT

I've just been given an iiyama HM903DT monitor but it doesn't want to play with my mac mini
The trouble is this:- If a turn on my mac with the screen powered on my machine creates a color profile for it (from monitor dcc information I suspect). That would be ok if the profile was correct but it's not. On some jpgs and tif files are massively over saturated (for example gingerbread man.tif) yet other jpegs and tifs are fine.
If I start up my mac without the screen turned on my mac defaults to "Display" for color and all is well.
I've check in Universal Access and 'Enhance Contrast' is set correctly, I've also tried using color-sync to no avail......
What can I do to stop this bug it's driving me nuts!!!
thingi

Me too. Snow leopard seems to ruin my 9CA3 screen because the color looks to be washed out.

Generic Profiles for HTML?

I'm surprised at the lack of profiles for some very popular
phones in Device Central... Palm, Blackberry and HTC for example...
these phones might not have Flash built-in but they are the most
popular phones available right now... surely I am missing
something... I'm not designing a Flash mobile phone application...
I just want to see how the HTML looks for given devices... please
let me know if I've got the wrong product for this purpose.
Thanks!
Cliff.

The following link has standalone players but they are not
free:
http://www.yospace.com/spede.html
You can create you own DC profiles by modifying the main XML
file that feeds DC. The only issue is that DC actually contains
(what seems to be) accurate configuration settings to simulate the
processing speed of a target device. Additionally, DC includeds a
bunch of hard to find settings about each phone that it comes with.
If you do add your own profiles, they probly won't accuratly
represent the processing speed of your target device. And as far as
HTML—still not an option.
To modify the DC profiles, check out:
http://maxmediacorp.com/mmblog/?p=17
http://maxmediacorp.com/mmblog/?p=16
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=68&catid=615&threadid =1265420&enterthread=y
Good luck.

What color profile for digital printing?

Under color settings in InDesign i only find profiles for offset press but what color profile should i use if i want my document printed on a digital printer?

indewarry wrote:
i just find it strange that there is no 'standard' profile for printing for digital press. All profiles are for conventional press.
Like conventional presses, digital equipment uses a range of inks and papers, so there is no single profile that would always be correct, and the press operator can often calibrate the equipment to one of several differnt standards. I use a printer that offers both offset and digital (using an HP Indigo) printing, and all of their equipment is calibrated to GRAcol.
The fact that the printer couldn't tell you the correct profile is a big red flag shouting that they don't know anything about color management. Don't expect good color fidelity, and insist on a contract proof.

Profile for authorizations just for reading?

Similar Messages

Maybe you are looking for