Profile for multiple universes

Hello,
Is it possible to use one profile for multiple universes? Do I have to chose the objects from the different universes in the profile target section?
Thanks!

Yes, Profiles needs to be created based on the universe.it can be later splited according to the report and filter.
You can refer the below document to perform the same
http://wiki.scn.sap.com/wiki/display/BOBJ/Personalization+in+SAP+Business+Intelligence+4.0+Web+Intelligence+Publications

Similar Messages

  • Configuring optimizeit profiler for multiple kjs

    Hi,
    I am facing problems in configuring optimizeit profiler for multiple kjs. It
    works fine if i have a single kjs in my app server and i am able to read the
    profiler output. I am using iAS6.0sp2.
    When i try to change the script that attaches the profiler with kjs for
    multiple kjs all the kjs start on the same port i.e 10819. I want all the
    kjs to start on different ports so that i can read the profiler output for
    all of then at one go.
    If any body has done this before with success then please help me at an
    earlier date.
    This is very very urgent for me.
    sandhya

    There is three things important While you working with custom member ship and FBA to work. 
    1. If you have developed Custom membership extending SQLServerMembership provider then make sure to check for Machine Key. as internally if usese combincation of this to encrypt password, so if you used first userid using some other method of creating user
    then probably it does not use machine key in that configuration file.
    2. if you doing brand new implementation from base classes you probably want to check your query & stored Procedure. make sure to run sql profiler to see what query is getting fired.
    3. this one is most least and mostly not will be problem but do check Application Name,
    Note: Key to get this working is Machine key, Application Name, your custom code revisit, sql profiler and you should be good,
    Also do review FBA Code from CodePlex you can save significant time in developing from scratch.
    -Samar
    www.gosam.info
    Please remember to click Mark as Answer on the answer if it helps you
    Sr. Software engineer

  • Changing the display profile for multiple users at once.

    Is it possible to change the display profile for multiple users at once? We would like ot be able ot add tabs and channels globally, but right now we can anly do it for once user at a time. Also, is it possible to have certain generic display profiles that all users use? like an admin profile and a tech support profile and a normal suer profile? Any help is appreciated...

    Yes this possible using the dpadmin batch command.
    Please check the dpadmin documentation for the batch command.
    For generic display profile what you can do is create users and assign the user particular roles. The display you would be creating would be for the roles. The users belonging to that role would inherit that display profile.
    HTH ..

  • How to change path of Users Terminal Services Profile for multiple AD users on server 2003?

    Hello experts. I am working on a file server migration. All data has been migrated, I am currently working on redirecting users to the new file server. I
    am able to select multiple users at once in ADUC -> right-click -> properties -> profile and here I can change the home folder and roaming profile path for each all users to point towards the new file server. 
    The issue I have run in to is that we have roaming profiles for terminal services users. So, there are hundreds of users that have their terminal services profile
    configured in AD -> Right-click user (one at a time) -> properties -> terminal services profile. Here, the profile path is configured for each user as \\OLDserver\Profiles\%username%
    and I need to change it to \\NEWserver\profiles\%username%. 
    I know that you can configure this path via group policy, I set up a GPO; Computer / Administrative Templates / Windows Components / Terminal Services / “Set Path
    for TS Roaming Profiles” as \\NEWserver\profiles and applied this GPO to an OU containing the TS servers.
    The problem is, the GPO is not working... When I log in to the TS and add a document to My Documents, it is still saving under \\OLDserver\profiles\Username.
    So, the settings in AD are trumping the GPO I believe. What is the best way to accomplish my goal? Thanks in advance!

    > to change it to \\NEWserver\profiles\%username%.
    That is "profile" in opposite to...
    > add a document to My Documents, it is still saving under
    > \\OLDserver\profiles\Username.
    ...this one which is Folder Redirection and has NOTHING to do with
    server based profiles.
    > So, the settings in AD are trumping the GPO I believe.
    No, it isn't. When you do not enable FR and you access "Documents", you
    will never see an UNC path but the local c:\users\xyz\documents folder.
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • Terminal profiles for multiple shells

    I'm a Unix geek, and in prior versions of OS X I've had profiles set up in Terminal.app to run with multiple shells, aside from just the default shell associated with my user account.  So, for instance, I have profiles named Bash, Ksh, and Zsh, that run those as login shells ... or at least I did until Yosemite.
    The profile options in Terminal.app have changed in Yosemite, specifically with the removal of the option to run a non-default login shell.  I could get around that with /usr/bin/login -f <username> /bin/<othershell> [-l], but in the case of /bin/ksh, at least, I haven't been able to find a command line that will invoke ksh directly as a login shell and source /etc/profile.
    If I leave the "run inside shell" checkbox checked, I can use the command exec /bin/ksh -l and have /etc/profile sourced, but of course I get the remnants of the bash environment in my exec'd shell.
    What magic incantations can I use to just get Terminal profiles to work again for multiple login shells?

    Hi,
    If your project is running in all company codes then you create a single Project Profile and dont default company code and Plant ,while creating the WBSE enter the company code and Plant for that WBSE.
    Else if you have separate projects in company codes then create 15 Project profile /Company code and default the company code in Project Profile.
    Thanks,
    Muzamil

  • How to alter the default profile for multiple users

    I am trying to alter the default profile assigned to users during user creation to a new profile. I know to change the profile for one user using the syntax
    alter user abc profile profileabc
    The issue I have is that there are 100's of users under default profile and changing for each of them manually would be difficult. The approach that I see is to write a shell script where I connect to the db and get a list of all the users with default profile. Then I loop through the file making connection to the db each time and executing the alter statement.
    Please help if you think that there can be a more efficient approach to this.
    Thanks

    alter user abc profile profileabcspool newsql.sql
    select 'ALTER USER '|| USERNAME || ' PROFILE NEWPROFILE;' FROM DBA_USERS;
    SPOOL OFF
    @newsql.sql

  • Section for multiple universe

    Hi Guys,
    I have 2 data sources in my Webi report  that have the same columns inserted in the form of a Section.
    The column names are - Employee Name & No. of Projects.
    No. of Projects = Count (Project Name). Project Name is a merged dimension. Project ID is merged as well.
    The Section is defined based on the "Project Type" object which is a merged dimension. Project Type has different values for both Universe.
    Now, for data source 2, the Employee Name object has Employee IDs. To get the Employee Names for that object, I have added another data source which has objects Worker ID & Worker Name.
    Now, I have merged Worker ID with Employee Name object from data source 2. Then, I created a detail object called Employee Name with the following formula -> Employee Name = Worker Name. This way, I get names instead of IDs for Employee Name.
    The problem is - How do I get the Section for "Project Type" with columns Employee Name & No. of Projects correct in my Report. Could anyone please help?

    Sorry, I did not understand the part where you suggest to use Left(table.column) on the second universe and use that as Project Type and have table.column as a detail of it, as the project type description. Could you please elaborate on that part?
    Also, currently the "Employee Name" object from Universe 2 has "Employee IDs" values in it. In order to get the actual names, I am getting "Worker ID" & "Worker Name" objects from Universe 3. Then, in Webi I have merged "Employee ID" with "Worker ID" and created a detail variable with formula - Emp Name = Worker Name, to get the actual names. However, doing this is creating problems in the section as "Employee Name" from Universe 1 is also merged with "Employee Name" from Universe 2 & "Worker ID" from Universe 3.
    Is there a way, I can perform this task in Universe 2 itself?

  • How to configure oracle listener profile for multiple oracle database

    Hi,
    I am going to install solution manager system in the same server of ERP EHP4 on Windows. Both DB are oracle.
    I'd like to know how to configure listener in this kind of envirnmonent.
    a. use two listener and different ports
    b. use same listener but different ports
    c. use same listener and same port
    Which is the correct mothed?
    And, after installation, there seem three set of profiles of listten, one for ERP, one for SLM, and the other for OS?(%windir%system32), which one is functional?
    Please advise.
    Thanks a lot.
    Regards,
    Alex

    Hi,
    standard installation is creating new configs for listener for each instance.
    I would recommend to use one listener per each instance.
    YOU CAN NOT HAVE one port number for two differnet systems!
    If you want to use one listener than you must adapt tnsnames.ora, listener.ora and ensure that both systems will use different port numbers.
    For example PORT= 15<system number>
    Peter

  • One Wireless Profile for Multiple Sites

    Hello,
    I was wondering if someone can help me get my head around what I am trying to do and whether or not it is even possible.  The goal is to give our users the ability to go to any of our locations (which are connected via circuits) with a Cisco 7925 phone and have it function.  So in essence we want to have a single Network Profile so the user doesn't need to do anything to the phone for it to function if the move between locations.  We are using a 5508 Controller w/ 3502 APs.
    So at our main location I have an SSID created, which is bound to an interface I created on the controller in our Voice VLAN.  This works great, the phones pickup an IP in the block and everything functions as it should.  My confusion is how do I create the same SSID / security parameters for each of our other locations, so if they leave our main site with the phone and goto the other location it sees the SSID, associates and then picks up an IP address in the Voice VLAN at the other location?  What confuses me is the AP / controller seem to handle all the DHCP requests, so even if I have a ip helper-address on say the routers interface it isn't actually being forwarded from the router, it is coming from whatever interface is bound to the WLAN on the controller.  I'm sure I didn't explain this well, I'm not looking for a step by step guide maybe just some pointers as to examples or what I need to study up on to accomplish this.  Thank you very much for all your time.

    If this other location is not deemed remote (with a slower WAN link), then you may want to look into utilizing AP groups vs H-REAP.
    AP groups would allow you to specify which SSIDs and associated VLANs are enabled per AP group. Then just add the necessary APs (e.g. APs in BLDG-2) to that group (e.g. BLDG-2).
    But also depends on where you want the client subnet terminated.
    With AP groups or H-REAP central switching the client subnet would terminate at the central location where the WLC is located.
    With H-REAP local switching, the client subnet would terminate locally where the AP resides.
    Central switching just means all data will be sent back to the WLC, where local switching means that the data will be routed out locally.
    To me, AP groups are easier to configure as the config is done at the AP group and then just a matter of putting the AP in that group.
    With H-REAP, you have to configure the AP, H-REAP group including adding the AP to the group as well as SSID config if wanting local switching.
    See the following for more info.
    http://www.cisco.com/en/US/docs/solutions/Enterprise/Mobility/emob41dg/emob41dg-wrapper.html
    Sent from Cisco Technical Support iPhone App

  • Automatic way to change the connection for Multiple universes

    We recently migrated the BO objects like universes and connections from 3.1 QA to 4.1 Dev.
    But now we want to point all our universe connections of 4.1 Dev system to the BW Dev system instead of BW QA.
    Is there any automated way of doing it ?
    Thanks,
    Tilak

    Promotion Management Overrides

  • Order of profiles for netcfg-auto-wireless

    Hi fellow Archers,
    I'm running Arch Linux with netcfg 2.5.4 on my laptop, and have several wireless network profiles set up. Amongst other things, I have three profiles for my University WLAN. The reason for this is that the University offers three different wireless networks, one for Staff, one for Students and one unencrypted with a password-protected HTTP proxy. I have access to all three, but I want netcfg to attempt to connect to the networks in that order.
    I have tried to name the profiles as such:
    UniversityAStaff
    UniversityBStudent
    UniversityCOpen
    But that doesn't seem to make any difference; it still connects to the Student network by default.
    Is there any way of setting the priority of the wireless networks that netcfg-auto-wireless tries to connect to?
    Jon

    if you make your profiles like in /etc/network.d/examples/wireless-wpa-configsection you can put a priority falue in the wpa_supplicant section this should do the trick
    edit because of typo
    Last edited by parintachin (2010-03-08 14:48:44)

  • Relative path for Download directory folder.I created a firefox profile and i wanted to use this profile in multiple machines.I wanted to use a relative path for download directory with respect to the profile folder.I need this on Linux machines

    I have a use case where I need to use different download directories with different firefox profiles.I need to use this profiles in multiple linux machines.
    I need to have a relative path to my download directory with respect to the profile folder.
    Ex: I have a selenium test which opens a website and downloads it to my machine.I want this downloaded file to go into some specific folder relative to this profile folder.How do I do this??

    That is not a practically empty xinitrc - that file only needs one line: exec WM.  Other things are entirely optional, and some of them very useful, but I'd encourage you to stick with the simplest xinitrc that will do what you require.
    Is slim involved?  Probably.  That is the source of many problems.  But to start narrowing this down, I have 3 suggestions:
    1) temporarily (at least) change your inittab to default to runlevel 3 ... actually, is it currently set to 5 or 3? if it is currently 3 that would explain why slim doesn't start.
    2) at a tty in runlevel 3 use "xinit" instead of "startx".  Startx is fine most of the time, but it is essentially just a complex wrapper for xinit.  That complexity can often iadd useful functionality, but it *always* makes troubleshooting more difficult.  So for now just use a vanilla 'xinit'.
    3) remove dbus-launch from your exec line in xinitrc.  This is done by console-kit so it is redundant and potentially problematic.  Further BOTH of these are taken care of by slim, so I'd even suggest getting both a jump start on being ready for slim and simplifying troubleshooting by removing both of them.  Just make that line "exec openbox-session"
    Edit: adding one more:
    4) temporarily switch out openbox-session for openbox.  I suspect the reason feh's setting of the background is getting overridden is due to a script or setting in openbox's autostart settings - many of these are only invoked when "openbox-session" is called, while "openbox" starts *just* the window manager itself.
    Last edited by Trilby (2012-10-03 17:30:36)

  • Multiple AVC Profile for each SSID

    Hello,
    I know there is limitation on the number of ACLs in each AVC profile, but is there a way to build multiple profiles and link it to the same SSID?
    thanks,

    Hi Sandeep,
    thanks for your reply, I think Cisco should consider allowing provisioning multiple profile for each SSID as the number of applications that needs block are exceeding each profile..
    I do have Guest SSID and I want to block everything using AVC, due to it's limitation, this cannot be achieved.
    Thanks,

  • Can you set up multiple profiles for I pad

    Can you set up multiple profiles for I pad

    Not sure what you want to do.
    How to use multiple iPods, iPads, or iPhones with one computer
    http://support.apple.com/kb/HT1495
    How to Share a Family iPad
    http://www.macworld.com/article/1163347/how_to_share_a_family_ipad.html
    Using iPhone, iPad, or iPod with multiple computers
    http://support.apple.com/kb/ht1202
    iOS & iCloud Tips: Sharing an Apple ID With Your Family
    http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/
    How To Best Use and Share Apple IDs across iPhones, iPads and iPods
    http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
     Cheers, Tom

  • How to set up multiple profiles for an Express?

    My wife is visiting her mother for a couple weeks and the idea is for her to take one of our Expresses with her so she can use wifi while she's there. I was told that the best way to do this is to set up a second profile for 'Travel' on the Express that she'll be taking with her, so she can use that, and not have to change the settings we have for it at home.
    I can't figure out how to do this. Anybody know?
    Thanks!!

    Meetoo wrote:
    Not much. But there isn't that much to know I wouldn't think. All there is is her mother's PC, which is hooked up online via some kind of modem. That's it. Think 1995, except high speed I guess.
    I'm sending my wife there armed with two ethernet cables, a netgear ethernet switcher, and an Express. I was hoping that she could just plug the express into the switcher, find it in the airport utility, and do the 'create a wireless network' option, and hopefully it would guide her through it. Do you think it'll be that easy, or are there problems ahead for her?
    What do you propose that she connect the "Netgear Ethernet switcher" to? She can't connect the switch directly to that modem unless the modem has router functionality. If she connects the Express to that modem, how the Express needs to be configured depends on whether the mother has (a) cable service or DSL service with the modem handling the sign-on (PPPoE connection) on one hand or (b) she has DSL service with a "downstream" device (in this case her computer) handling the sign-on. If this arrangement would work, there's no available Ethernet port on the Express to use to connect the mother's computer, so unless that computer has wireless capability, it would be offline.
    It would help if you could learn what ISP the mother is using and what modem (brand and model) is involved.

Maybe you are looking for