Profile in use, can't be accessed, FF only worked when I created a new profile, are bookmarks lost?

My computer crashed, when I restarted it and restarted FF (6.0.12.1739, with google, adobe and similar plugins), I got the "already running" message.
I use Windows 7.
When I learned to look for the parent lock file, not only was it not there, but my original profile folder to be empty.
So I created another profile folder, and now FF works, but I cannot access my old profile folder.
When I open the location where it should be, nothing's there. But if I go to profile manager, I see my original profile '' is'' still there (and apparently it's where it should be). I tried typing its location in Start, to no avail.
'''I tried making all folders visible,''' as some sites recommend for people who use Windows, but this did not make my old profile folder visible.
Are my bookmarks lost for good?
I have restarted the computer several times 'til now.

I forgot to mention that I can't access my old profile, because whenever I click on it, I continue to get the "already running" message. I know that I exit FF when I access profile manager.

Similar Messages

BUG: Access Connect Abort, when I create a new network profile.

Where can I report bugs?
My system is windows xp sp2 on X60.
I have been using AC-4.42(Access Connection) for a long time. And before, there is no problem when I added new network profile into it.
But yesterday, I wanted to add a new profile into it. I opened the "create profile" window and input the name of the new profile (I have two network adapters, wired and wireless. So by default, the both are selected. And I left the default selection unchanged.), then "Next". The 2nd window is about wireless config, I configured everything, then go on "Next", at this moment, an error occured and AC aborted with four error windows. The titles of those windows are "ACMainGUI.exe error" and "ACMainGUIWnd: ACMainGUI.exe".
Then I did it again, I opened the "create profile" window, and this time, in this (1st) window, I changed the selection of network adapter, besides inputing the name of the new profile. I only selected the wired adapter, and then "Next". Sadly, this time the 2nd(next) window did not appear(pop up) at all. Instead, those four error windows poped up one by one. AC aborted again.
I repeated the above operations many times, and everytime, AC aborted.
So I went to the online "support and download" to look for some updates about AC. And I found AC-4.52 with luck. After downloading and installing, unfortunately the problem still exists. AC-4.52 still aborts when I create a new network profile.
So now, what to do. I have no ways. I am expecting the developers could note this problem and fix it and give me a newer update as soon as possible.
Sigh...

I have exactly the same issue. Next to the actions mentioned by ixbm I have also fully uninstalled and reinstalled the AC-4.52, but this didn't help.
Any idea on how to solve, installing older version?
regards,
Bart

Hello MacHeads: I downloaded Handbrake 0.9.1 for Tiger, so I can upload a homemade DVD for editing in imovie. Problem is I can't even access Handbrake Help book, because I think my firewall settings are preventing me. I tried turning off all my firewall

Hello MacHeads: I downloaded Handbrake 0.9.1 for Tiger, so I can upload a homemade DVD for editing in imovie. Problem is I can't even access Handbrake Help book, because I think my firewall settings are preventing me. I tried turning off all my firewall settings.? IDK if I'm even doing that right. Can anyone help out here?

You don't need Handbrake for that if it is your own DVD.
You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle.
a DVD is in a compresed format called mpeg2, which is standard across all DVDs. This is what is known as a 'final delivery format' and is not suitable for editing. Because is is compressed, a 4.7GB DVD can hold a two hour movie (dual layer DVDs twice that), whereas the DV stream from a video camera, which runs at about 13GB per hour, is not compressed and IS intended for editing.
In other words you have to 'reverse engineer' the DVD back to an uncompressed format in ordfer to edit it. There is a penalty for doing this in terms of slight quality loss, but it is one you can live with.
When you have your DVD as an icon on your desktop, double-click it, and it will open to reveal a TS-Folder containing a number of various files, some called VOB. These are the constituent parts of any video DVD.
When you have downloaded and installed mpegStreamclip, and purchased and installed the Apple mpeg2 plugin, open mpegStreamclip and drag the entire TS Folder into its window. Then using the various menus available to you (just explore them and you will get the hang of it) ask it to convert to DV.
That DV file, which will be many times larger than the original TS Folder, and which can a while to create (be patient - make coffee or prune the roses!) is what you can now import into iMovie for editing etc.
When you have finished doing that, you then have to turn the project back into a DVD.
mpegStreamclip can be downloaded from here:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.

When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?

When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?
All of a sudden I noticed that most of the folders on my computer were no longer using the folder icon, but the generic document icon. I had to manually change back the icon being used by opening Get Info for each folder and copying and pasting the generic folder icon from some folders that remained unchanged. Now whenever I create a New Folder (right click -> "New Folder"), the icon that shows up is the generic document icon (white page with top right corner turned down). And I have to manually change it so it shows up as a folder in Finder or on my desktop. I don't know why or how this switch happened. All of the folders now on my computer look ok, but I need to change the default so when I create a New Folder it uses the correct icon.
I have also Forced Relaunch of my Finder and rebooted the system. I downloaded Candybar but am not sure what will fix anything, so I haven't proceeded.
Anyone know how I can do this? Thanks.

Anyone?

HT1206 I need a work iTunes account for my work system, but used my work email address as an associated email to my personal iTunes account. Now I can't use the work email to create the new iTunes account. how do I remove the email from my personal accou

Since I upgraded to Mavericks from Snow Leopard I need a work iTunes account for my work system, but used my work email address as an associated email to my personal iTunes account.
Now I can't use the work email to create the new iTunes account. how do I remove the email from my personal account?

You can long into an account via this page and update the email addresses that you have on it : http://appleid.apple.com

My sound has recently gone on my Iphone4s, this only happens when I use my phone myself. The sound works when I receive calls and texts but I am unable to watch videos, listen to music etc it seems like my volume button has gone! Can anyone help??

My sound has recently gone on my iphone4s, this only happens when I use my phone myself. The sound works when i receive a call or a message etc but I am unable to watch videos or play music, the sound also doesn't work on games. Please can anyone help with this issue or let me know how to fix it if experienced the same problem?

Remove all apps from multitasking bar. Double click Home button then tap and hold an icon and tap on little x on every app. Then reset. Hold down Home and Power button until Apple logo appears.

How can my laptop access the downloaded files like mp3 and pdf documents which are in my iphone 4G?

how can my laptop access the downloaded files like mp3 and pdf documents which are in my iphone?

Yes you will need to NAT at some point to go from private to public address space. Here is a basic configuration if you are interested:
interface F8
ip nat inside
interface G0
ip nat outside
ip access-list standard NAT
permit 192.168.11.0 0.0.0.255
ip nat inside source list NAT interface G0 overload

I have changed my account to SIM only and when I put my new SIM Card into my iPhone 4 it just says 'no service' in the top left corner, also iMessage has stopped working too. I can only use my phone on my WiFi at the moment, does anyone have any idea?

I have changed my account to SIM only and when I put my new SIM Card into my iPhone 4 it just says 'no service' in the top left corner, also iMessage has stopped working too. I can only use my phone on my WiFi at the moment, does anyone have any idea?

I already have, I contacted Orange yesterday and they said I will receive a text to confirm the registrastion for my new SIM Card, they said the text would arrive between 2 and 24 hours and its been over 24 hours with no text recieved

I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

If you want Bridge CS6 to open when using Photoshop CS6, you must quit Bridge CC.
Then File menu > Browse in Bridge will bring up Bridge CS6.
If Bridge CC is already open, The File > Browse in Bridge for Photoshop CS6 will use Bridge CC and Bridge CS6 will not open.
I hope that's the answer you were looking for.
Gene

Does iMessages only work when writing to people who have i05, or can you write to people using other systems ?

I have an iPad 2, but have never yet been able to send a iMessage....does this only work when writing to people who also have i05, or can you also write to people who use other systems ?
iMessages is turned on on my system, but even when writing to people who I know have iPads or iPhones , I just get the red exclamation mark....
Sending messages on my iPhone seems to work okay when sending to non iPhone users, so I don't understand what's wrong here .

From http://support.apple.com/kb/HT3529 :
iMessage allows you to send unlimited text, photos, videos, locations, and contacts using Wi-Fi or 3G* from your iPhone, iPad, or iPod touch to other iOS 5 users.
Note: On iPhone, if iMessage is unavailable, the message may be sent as SMS or MMS, depending on content. Carrier messaging rates may apply. You can turn this on or off in iPhone at Settings > Messages > Send As SMS. Messages sent using iMessage will appear in a light blue bubble, while messages sent using SMS or MMS will appear in a green bubble.

When I create a new address in Contacts the country is automatically coming in as Netherlands - though I'm using the phone in USA. Can't find how to change country default.

When I create a new address in Contacts the country is automatically coming in as Netherlands - though I'm using the phone in USA. Can't find how to change country default.

https://discussions.apple.com/message/16474985#16474985

Phone receiver only works when using speaker. I can only receive/answer callls using the speaker.

After dropping my phone, the iPhone 5 receiver only works when using speaker. I can only receive/answer callls using the speaker. What to do?

Hi jlk166,
I understand that you are experiencing some issues with your receiver speaker. Here is an article that can help you troubleshoot this issue:
If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone
http://support.apple.com/kb/ts5196
Thanks for using the Apple Support Communities. Have a good one!
-Braden

My Airport Time Capsule only works when I turn off and turn on, but I think this may end up with the unit. What can this happening and how to solve?

Time Capsule Airport
Hello to all, good day, sorry my english google, but it is the tool I have at the moment. I'm having trouble with my Time Capsule Airport, I made all the settings according to the manual, but there has been a connection problem with my iMac. When I finish my work I turn off the imac and then again when they return to work and care, it can not connect to Time Capsule Airport, making it impossible to remove the files and make back up by Time Machine only works when I turn off and turn on the Airport Time Capsule , but I think this may end up with the unit. What can this happening and how to solve? Thank you.
Olá a todos, bom dia, desculpe meu inglês google, mas é a ferramenta que tenho no momento. Estou tendo dificuldades com a minha Airport Time Capsule, fiz todas as configurações de acordo com o manual, mas tem existido um problema de conexão com meu iMac. Quando termino meus trabalhos desligo o imac e depois quando retorno pra trabalhar novamente e ligo, ele não se conecta a Airport Time Capsule, impossibilitando retirar os arquivos e fazer o back-up pelo Time Machine, só funciona quando desligo e ligo a Airport Time Capsule, mas acho que isso pode acabar com o aparelho. O que pode esta acontecendo e como resolver? Obrigado.

This is easier to do with pictures perhaps.. since we do not share a common language and machine translation leaves a lot to be desired.
In the airport utility bring up your Time Capsule.
Simply post the screenshots here.
So here is mine.
Click on the Edit button and give us the Internet and Wireless and Network tab..
eg.
Please also make sure you are set to ipv6 in your wireless or ethernet .. whichever is used.. and do tell which.
This is wifi in your computer.
The following are important..
DO not use long names with spaces and non-alphanumeric names.
Use short names, no spaces and pure alphanumeric.
eg TC name. TCgen5
Wireless name TCwifi
Use WPA2 Personal security with 10-20 character pure alphanumeric password.
read apple instructions to help with TM and TC.. they did finally admit it has issues in Mavericks.
OS X Mavericks: Time Machine problems
Mount the TC manually in finder.
AFP://TCgen5.local
When asked for the password .. that is the disk access password and save it in the keychain.
Reset Time Machine
See A4 here. http://pondini.org/TM/Troubleshooting.html

How to load a default prefereces when a create a new profile

i need disable access for a urer creates a new profile in firefox. if it not possible block a profiler manager in firefox, other solution is when user create a new firefox profile, it load defaults preferences

hello, probably the best solution in this case is to use the ''mozilla.cfg'' file to lock certain preferences - it will work regardless of which profile is used. for more information about how to implement it please see http://kb.mozillazine.org/Locking_preferences

Why Dynamic Parameter is not working, when i create report using stored procedure ?

Post Author: Shashi Kant
CA Forum: General
Hi all
Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
is not shown to me when i referesh the report for viewing the results.
I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
============================================================================================
1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
Dynamic Parameters in Action
My question is that whether dynamic parameter is working with storedprocedure or not.
When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
Please reply soon , it's urgent
Regards
shashi kant

Hi Kishore,
I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
=lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
As to the second issue, please try to use the following expression:
=Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl file with all the size properties to us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Profile in use, can't be accessed, FF only worked when I created a new profile, are bookmarks lost?

Similar Messages

Maybe you are looking for