Profile issue in export workflow when PS is editor but not within Ap

Aperture is with me on my MBP (with Elements as the external editor). My place of work is not graphics related, so it doesn't have Ap but does have PS CS8, which I've used happily for a long time, for their needs and I can use it for mine as well. So I can't use PS as the internal editor, which is OK, it's just the way it goes. I'm fine with exporting 16 bit TIFFs, using PS for all the things I can't do in Ap, and then creating 8 bit TIFFs for whoever I'm sending the images to, who will use them for the gamut of uses, both print and web, but I'm not in the loop after I hand them off. The images do not then go back into Aperture, they're archived separately.
What is the best way to workflow the color profiles in doing this? Images come RAW off a Pentax K10D and into Aperture for conversion and color and exposure, then into the pixel editor. I work in and save a set in 16 bit RGB and then hand off a set in 8 bit sRGB. Here's my problem: When I work within Aperture and Elements (internally), everything works as planned, and when I check the images but I send them they're correct in how they look and the profile as listed. But I'm not getting the same results when I export out to PS from Ap, do the same routine and check. Sometimes there is no assigned profile, and sometimes if I then assign sRGB the image goes from looking right to wrong, so I can't ignore the issue : ) No doubt it's from the external editor only being able to make one blanket profile assumption at a time, either working or exporting.
I understand that Aperture uses its own color space, wider than both. Am I correct in trying to stay RGB and then converting to sRGB? How do I achieve proper profile workflow when using Aperture and exporting to PS externally? Thanks very much for direction in this. Searches have gotten me info about what results I likely want, but not quite how to get them in this situation.

Arrg. Sorry for that typo. The sentence should have been " When I work within Aperture and Elements (internally), everything works as planned, and when I check the images they're correct in how they look and the profile as listed. "

Similar Messages

  • How do I set a specific page to open when I open a new tab in Firefox? I can open the page when initially opening Firefox, but not for subsequent tabs/pages.

    How do I set a specific page to open when I open a new tab in Firefox? I can open the page when initially opening Firefox, but not for subsequent tabs/pages.

    You can use an extension to set which page to open in a new tab:
    *NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/
    *My Homepage: https://addons.mozilla.org/firefox/addon/my-homepage/

  • What do you do when ipod is detected but not identified?

    What do you do when ipod is detected but not identified?

    Hi there schnee2,
    You may find the troubleshooting steps in the article below helpful.
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    -Griff W. 

  • I have an iphone 4s and the speaker has stpped working when I play music with i tunes or you fox. It works when they ring me but not when i want to listen to music :( do you know how I fix this?

    I have an iphone 4s and the speaker has stpped working when I play music with i tunes or you fox. It works when they ring me but not when i want to listen to music :( do you know how I fix this?

    Go to settings/music/volume limit tap on that.  Make sure it is set to OFF and when you tap it that the slider is at max

  • I am using iphone4 and recently updated to 7.0.4 from then onwards having issues with phone book. It will open but not able to scrool up and down and all options are not working. Is any one facing same issues?

    I am using iphone4 and recently updated to 7.0.4 from then onwards having issues with phone book. It will open but not able to scrool up and down and all options are not working. Is any one facing same issues?
    Why apple also doing such kind of softwares? Cant they do testing before releasing the product?
    Could any one help me out of this?
    Thanks,
    Rajesh

    See this discussion...
    https://discussions.apple.com/message/23731048#23731048

  • HP D110 AIO printer. Prints jam when printing with wireless, but not when hooked to USB cable! HELP!

    I have a HP D110. It jams the paper when I print with wireless, but not when I use USB cable. Any ideas?

    From what you describe you are having issues printing from MS Office. Have you had trouble printing from other resources on your computer (e.g. from the internet or another program)? The first thing I am going to suggest is that we start by uninstalling and reinstalling the printer from the resources available online. 
    First if you use a USB cord, make sure to remove it (this is important). Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer. 
    In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it. 
    http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3562006&lang=en&cc=us...
    Install that and let me know the result! 
    Have a great day!

  • HI I have an Iphone 3GS and the microphone jack works when I play music but not when making phone calls.   please help as I use it for conference calls

    Hi   I use my phone for conference calls and use the microphone jack to connect to speakers.      It doesnt work when making phone calls but when i play music on the phone the jack works with the external speaker.   

    Happy to have been of help. Hope all goes smoothly.
    BTW, for the sake of others who may help you here, it's usually most polite if you mark the post that answered your question as being the one that "solves" it, not your own post. That's how people get points here, if a questioner marks their post as either "helpful" or "solving". It's not an issue for me, but for those just starting out in the forums it may be important to them. See:
    https://discussions.apple.com/static/apple/tutorial/mark.html
    and
    https://discussions.apple.com/static/apple/tutorial/reputation.html
    Regards.

  • ITunes crashes on exit when iPod is connected, but not otherwise?

    I had this problem ever since I installed iTunes 7...
    It occoured as soon as I installed the new verison while still using my old 4gb first gen. iPod nano.
    Now I just recently bought a new second generation nano, and still have the same problem.
    And the issue is, Whenever I close iTunes while my iPod is connected (but not being updated), i get the message that "iTunes.exe has preformed an illegal operation and will be closed".
    Though I just noticed that if I disconnect the iPod before closing itunes, it closes fine and normally.
    I Have tried to solve it by following toturials for uninstalling both just iTunes, and iTunes + QuickTime at the same time, and preform separate installations after cleaning the temp. folder and restarting. None of it has helped me solve the problem
    -And I have lived with ifor a while, but it is getting really annoying if I am sititng on my computer and jsut close iTunes, without disonnecting my iPod, to run another program using sound or a lot of system resources. And thne each time get the error-message that "iTunes preformed an illegal operation and..."
    Anytihng that can be done? -I run NO plugins for the record, and the iPod is connected by USB cable (seeing it is a Nano)
    Anything anyne can suggest that I'd do, then please tell.
    -Or if anyone need to know more then please ask.
    Bigtower III Pentium 4   Windows XP Pro   [4gb Ipod nano. 2nd. gen.][Itunes 7.0.2.16]
    Bigtower III Pentium 4   Windows XP Pro  

    Hi, Im sorry just to add on to this discussion but I couldnt figure out how to start a new discussion and I am going mad! I have a new ipod because my last one was stolen and I have plugged it in and my PC wont recognise it. I think that is because my old ipod is the only one my computer will accept. Can that be right? It said the hardware device had been detected and then it said that it was troubled and it simply did not work. Now it is plugged in and not at all recognised in my computer anywhere. Can any one help this clueless girl who simply wants to listen to music again?
    Thank you.

  • My ipod touch 8gb will not sync ,computer is recognising camera wizard when i plug in but not for itunes,i have tried to de install then re install but to no avail this is a replacement ipod but the last one i had was ok syncing with the same computer

    my ipod touch will not sync to itunes when i plug it in to my pc it is recognising the camera wizard but not showing up in itunes i have tried de installing and re installing but to no avail it is a replacement ipod but the last one was ok with syncing on the same usb connections can anyone help me out please

    Try to disable the camera notification: http://support.apple.com/kb/TS1500
    and make sure that Apple Mobile Device Service is active on your computer: http://support.apple.com/kb/TS1567

  • Video file works when downloaded in IE but not when downloaded in FF

    I am constantly being sent QuickTime MOV files from a client via YouSendIt. Whenever I download the file via Firefox, it appears to download fine but it will not play the video. I get the error message "Error -2048: Couldn't open the file because it is not a file that QuickTime understands." Yet whenever I download the exact same file to the exact same desktop and try to open it with the exact same QuickTime player, but using Internet Explorer to click the download link (and handle the downloading, I suppose)... it works fine and the video plays perfectly. WTF?
    All other variables are identical. The only difference here is that the file is unusable when downloaded via FireFox yet perfectly fine when downloaded via Internet Explorer. Why? How is this possible?
    The only difference I can see on my desktop is that the version of a test video is 39,305,216 bytes when downloaded using FF, yet the exact same file is 39,370,752 bytes when downloaded using IE. I don't know if that's relevant information but how is this even possible since they are both downloads of the exact same file? Shouldn't both browsers neither add nor remove data from the file itself, so it should be the exact same file? Yet it's obviously different in some way, and apparently different in a way that affects the ability of QuickTime to play the file. Why would this be?

    If it works in IE but not FF, then it has nothing to do with the mp3s. More likely it's because of the HTML on the page.
    To start, page is missing DOCTYPE declaration... a MAJOR problem. The DOCTYPE declares which set of rules the browser will use to display the page. Without it, different browsers go crazy or do not work at all.
    http://www.w3schools.com/tags/tag_DOCTYPE.asp
    Validate the html code here:
    http://validator.w3.org/
    You will have to fix all the errors if you want this to work in all browsers.
    Best wishes,
    Adninjastrator

  • HT3529 Message Notifications show up in lock mode when screen is on, but not showing on black screen (sleep mode).

    My texts show up on my lock screen, but not on my black screen (sleep mode).  They used to, but not anymore.  I have "show messages in lock screen" turned on, but I don't see any options for sleep mode.  I have banners turned on.  All settings seem to be correct, but in order to see my messages I need to turn on my screen, which is frustrating b/c then I don't see messages when they are first sent.  Any advice?  Thanks.

    Thanks for the response, but I've tried that and it doesn't work.  I have friends and family who have their settings exactly the same as mine (including banner) and they get notifications in their sleep screen.  It's all very odd.

  • Flash works in Flash editor but not when puiblished

    Hi
    I have got my flash working fine in the editor but when I
    publish it, neither opening it in IE from the hard drive, nor from
    the internet works.
    The animation works fine, but there should be images loaded
    onto the animated squares and there's not.
    Any thoughts?
    Thanks

    LLuis12 wrote:
    > Hi
    >
    > I have got my flash working fine in the editor but when
    I publish it, neither
    > opening it in IE from the hard drive, nor from the
    internet works.
    >
    > The animation works fine, but there should be images
    loaded onto the animated
    > squares and there's not.
    My guess is your paths are wrong to the loaded content. Done
    for local view
    not for html. Make sure the paths to files are a ok.
    Best Regards
    Urami
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • Audio ok when playing on computer, but not there when playing on DVD player

    I've made two DVDs on my MacBook: one where I dragged a variety of short films into iDVD (imported via iMovie but NOT edited on iMovie!) and burned it - this one plays fine on everyone's computers and DVD players. The second DVD I created with material edited in iMovie and then burned via Share -> iDVD and while that plays fine on my computer, the audio is "missing" when I play it on a regular DVD player.
    I burned the DVDs the exact same way, used the exact same DVD stock, and played on the exact same DVD player, so what's going on? I don't think it's an iDVD problem, I think there's something (not) happening in iMovie...
    MacBook   Mac OS X (10.4.8)  

    What format is the original?

  • My screen freezes when reading e-mails but not other applications.

    Does anyone know the reason for my screen freezing when reading e-mails bot not in other applications?

    Hi Go toSettings Email Accounts Delete Email Account that's  not working then Re Add Account back again Do this with all Accounts you have problems with. Cheers Brian

  • My powerbook g4 (about 6 years old) has just started freezing up--mostly when in Apple Mail, but not always.  Any ideas?

    My powerbook g4 (about 6 years old) has just started freezing up--mostly when I'm in Apple Mail, but not always.  I have been restarting and it seems to work fine.  Any ideas what it might be?  I just repaired permissions.
    thanks!
    Anne

    aflipflopper wrote:
    Yes, it has been running slow.  If I do that will it erase what is stored on the hard drive?
    Thanks,
    Anne
    Tom wants you to run Disk Utility from the install disc and then select your boot volume and then click "Repair Disk" to check and correct any directory problems.  That will not erase any data files on the disc.  If Disk Utility actually makes repairs, do another "Repair Disk" operation, as sometimes one repair will uncover another error.  Stop when it gives the volume a clean bill of health without making any repairs.  Then restart the machine and see how things work.

Maybe you are looking for