Profile Manager Broken after Migration to OS X Server 10.8
After migrating from Lion Server to OS X Server 10.8, Profile Manager will not start. Server.app -> Profile Manager reports "Error Reading Settings". Apache Error log reports:
[Thu Aug 30 13:32:29 2012] [error] (61)Connection refused: proxy: HTTP: attempt to connect to 127.0.0.1:3329 (127.0.0.1) failed
[Thu Aug 30 13:32:29 2012] [error] ap_proxy_connect_backend disabling worker for (127.0.0.1)
I tried shutting down all web services (Profile Manager, Wiki, Web), ran "serveradmin command web:command=restoreFactorySettings", then turned back on Web and Profile Manger... same problem.
Any ideas what, exactly, is wrong and how to fix it?
this might not be true in your case but when I've seen "error reading setting"it has been a permission problem on the Library/Server/profilemanager folder (or other service)
Profile manager should have owner _devicemgr RW, group _devicemgr R, everyone R
same for the Data folder inside.
Might be forth checking
Similar Messages
-
Please help, after migrating to snow leopard Server my VPN is not working
Hi,
After migrated to Snow Leopard Server, my VPN settings are not working, My users not able to connect to VPN.
Please find below log. Please let me know the solution for it.
2010-01-05 13:19:32 IST Incoming call... Address given to client = 192.168.1.72
Tue Jan 5 13:19:33 2010 : Directory Services Authentication plugin initialized
Tue Jan 5 13:19:33 2010 : Directory Services Authorization plugin initialized
Tue Jan 5 13:19:33 2010 : PPTP incoming call in progress from '95.222.205.164'...
Tue Jan 5 13:19:33 2010 : PPTP connection established.
Tue Jan 5 13:19:33 2010 : using link 0
Tue Jan 5 13:19:33 2010 : Using interface ppp0
Tue Jan 5 13:19:33 2010 : Connect: ppp0 <--> socket[34:17]
Tue Jan 5 13:19:33 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x2794ebf2> <pcomp> <accomp>]
Tue Jan 5 13:19:34 2010 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x29205274> <pcomp> <accomp>]
Tue Jan 5 13:19:34 2010 : lcp_reqci: returning CONFACK.
Tue Jan 5 13:19:34 2010 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x29205274> <pcomp> <accomp>]
Tue Jan 5 13:19:36 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x2794ebf2> <pcomp> <accomp>]
Tue Jan 5 13:19:36 2010 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x2794ebf2> <pcomp> <accomp>]
Tue Jan 5 13:19:36 2010 : sent [LCP EchoReq id=0x0 magic=0x2794ebf2]
Tue Jan 5 13:19:36 2010 : sent [CHAP Challenge id=0x8d <620015595e4967664c1310241b4b3254>, name = "nova.thecoverstory.com"]
Tue Jan 5 13:19:36 2010 : rcvd [LCP EchoReq id=0x0 magic=0x29205274]
Tue Jan 5 13:19:36 2010 : sent [LCP EchoRep id=0x0 magic=0x2794ebf2]
Tue Jan 5 13:19:36 2010 : rcvd [LCP EchoRep id=0x0 magic=0x29205274]
Tue Jan 5 13:19:39 2010 : sent [CHAP Challenge id=0x8d <620015595e4967664c1310241b4b3254>, name = "nova.thecoverstory.com"]
Tue Jan 5 13:19:40 2010 : rcvd [CHAP Response id=0x8d <c68742dc9457be5a61e444f00f53371d000000000000000044c6f89fa49ed8bf4c17a2861a2cfd 04ae1e6b9199527f9f00>, name = "jenny"]
Tue Jan 5 13:19:40 2010 : DSAuth plugin: Error -25300 while retrieving key agent password from the system keychain.
Tue Jan 5 13:19:40 2010 : DSAuth plugin: Could not retrieve key agent account information.
Tue Jan 5 13:19:40 2010 : sent [CHAP Success id=0x8d "S=B503F226B4DE4105A4711C0EA2E7C21B1A9A935D M=Access granted"]
Tue Jan 5 13:19:40 2010 : CHAP peer authentication succeeded for jenny
Tue Jan 5 13:19:40 2010 : DSAccessControl plugin: User 'jenny' authorized for access
Tue Jan 5 13:19:40 2010 : MPPE required, but keys are not available. Possible plugin problem?
Tue Jan 5 13:19:40 2010 : sent [LCP TermReq id=0x2 "MPPE required but not available"]
Tue Jan 5 13:19:40 2010 : Connection terminated.
Tue Jan 5 13:19:40 2010 : Connect time 0.2 minutes.
Tue Jan 5 13:19:40 2010 : Sent 0 bytes, received 0 bytes.
Tue Jan 5 13:19:40 2010 : PPTP disconnecting...
Tue Jan 5 13:19:40 2010 : PPTP disconnected
2010-01-05 13:19:40 IST --> Client with address = 192.168.1.72 has hungup
Thanks,
Gulab PashaGreat !! save my trouble too
thanks a lot for the tip. -
Profile Manager failed after update
Hi all
I have just updated my OS X Server to 3.2.1 and after the installing the update (with no restart required) I can no longer access my profile manager web page. The error I am getting is:
An Error Occured
Reload Profile Manager and try again
Error: SyntaxError: JSON Parse error: Unrecognized token '<'
Can anyone tell me what this means? Has anyone has similar issues with the latest update?
I noticed as well that on the Server app in the profile manager settings some settings have been lost since updating.
Any help will be truly appreciated!
Regards,
AshleyAlso, on the Profile Manager settings in the Server app it is showing configure. The first screen says
Configure Device Management
"you can use this server to manage your users' Apple devices. If the devices have an internet connection, you can remotely lock or wipe them."
The second screen confirms the Organization Information
The third screen wants to confirm a certificate (I am using a self signed certificate). Once you click next it has at the top of the screen Confirm Settings and in the message section it has a warning /!\ sign with an error that says "An error with code -1 occurred" -
Check Stored Procedures after Migration from MS SQL Server 2008 to Oracle11
I successfully migrated my application database (azteca) from MS SQL Server 2008 to Oracle 11g R2. After migration, I found there are few stored procedures are not valid. How do I check these invalid stored procedures and find what is wrong with them by using SQL Developer? Thanks for your help.
KevinHi Kevin,
You posted quite a bit today, so perhaps you have already worked this out. If not...
1. View -> Reports -> Data Dictionary Reports -> All Objects -> Invalid Objects [for a specific schema name]
2. Next, for each invalid stored procedure listed in (1)...
a. Open in the code editor from the Connections navigator tree
b. Click on the Compile icon (two gears meshed together) in code editor tool bar.
c. Look in the Compiler log pane for errors.
d. Correct the errorsOf course, success in addressing any errors depends on your skill level dealing with Oracle PL/SQL.
Also, it may be helpful to read over section *3.2 Stored Procedures* in the supplementary migration guide:
http://docs.oracle.com/cd/E35137_01/doc.32/e18462/trig_stored_proc.htm#CHDEIGBC
Regards,
Gary
SQL Developer Team -
Changes not reflected on the page after migrating the page to server
Hi all,
I have migrated a page to server after making some adding a messageTextInput field but the changes are not getting reflected.
I followed the following steps to migrate the page:
1. Copied the page.xml from local machine to server.
2. Ran the below import command :
adjava oracle.jrad.tools.xml.importer.XMLImporter $JAVA_TOP/oracle/apps/aear/Refunds/webui/RefundCreatePG.xml -rootdir $JAVA_TOP -username apps -password apps -dbconnection "(DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=aebsw1d.aetna.com)(PORT=1571)) (CONNECT_DATA= (SID=AEBSDEV2)))" -rootPackage $JAVA_TOP
It said
Import completed.
3. Bounced the apache server.
4. Ran the below script to see the page definition:
DECLARE
BEGIN
jdr_utils.printDocument('/aebsu03/app/AEBSDEV2/apps/apps_st/comn/java/classes/oracle/apps/aear/Refunds/webui/RefundCreatePG',1000);
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE(SQLERRM);
END;
It has my messageTextinput field info. But I can't see it on front end. Even though when I run the page from my jdev I am able to see that field.
Plz guide me if I am missing anything.
Thanks in advanceHi,
Go to 'about this page' from front end and check the path for this PG.xml and compare that path with the one that you are importing.
As per my understanding, if this is a custom page, then the path you are using is not correct.
Let me know if you need more clarification.
--Sushant
[email protected] -
After migration Exchange 2013, MBX server, CPU utilization is so high
CPU utilization become so high this morning after migration into Exchange 2013,
Some healthy DBs is getting disccounetced with growing replay Queue length, mounted DB is no issue.
It seems that's short of CPU performance,
Are there any processes to limit or set up to reduce the load of CPU, MBX servers? It's temporary treatment...What's the CU level you have for your Exchange 2013? Also, please check node runner processor as Node Runner process can cause CPU utilization issue. I would also suggest to check your disk IOPs as it looks like disk IOPs issue to me as well. Thanks.
Regards, Riaz Javed Butt | Consultant Microsoft Professional Services MCITP, MCITP (Exchange), MCSE: Messaging, MCITP Office 365 | mstechtalk.com -
Problem connecting with VPN after migrated to SNOW LEOPARD SERVER,
Hi,
I recently migrated to Snow Leopard server, I have a strange issue when connecting to the VPN Server.
Please find the below error.
Fri Jan 1 14:38:22 2010 : CHAP peer authentication succeeded for jasmine
Fri Jan 1 14:38:22 2010 : DSAccessControl plugin: User 'jasmine' authorized for access
Fri Jan 1 14:38:22 2010 : MPPE required, but keys are not available. Possible plugin problem?
Fri Jan 1 14:38:22 2010 : sent LCP TermReq id=0x2 \"MPPE required but not available\"
Fri Jan 1 14:38:22 2010 : Connection terminated.
Fri Jan 1 14:38:22 2010 : Connect time 0.0 minutes.
Fri Jan 1 14:38:22 2010 : Sent 0 bytes, received 0 bytes.
Fri Jan 1 14:38:22 2010 : PPTP disconnecting...
Fri Jan 1 14:38:22 2010 : PPTP disconnected
2010-01-01 14:38:22 IST --> Client with address = 192.168.1.76 has hungup
Please let me know what is the cause and how can i fix it.
Thanks,
Gulab PashaDid you turn on the Printer Sharing in the "Share" preferences panel?
And, for Windows computers to access your printer, they need to install "Bonjour for Windows", which is a part of the iTunes+Quicktime install package, I believe.
Alternatively, you can turn on SMB sharing on your Mac, which is also in the "Share" preferences panel. You first highlight and turn on "File Sharing", then there is an "Options..." button to the right, clicke it and check the checkbox of "Share files and folder via SMB (Windows)". -
Outlook Profile not updating after migration
Hi,
Running a fairly straight forward setup
Clients = Outlook 2013
Legacy Exchange = 2010 UM SP3 RU4
Exchange = 2013 UM CU3
They're currently in a coexisting state
Have configured autodiscover, Outlook Anywhere etc.
Re-issued a cert with the same common name and included both legacy and new exchange servers
Split DNS
The issue that I have is after I have migrated a user from 2010 to 2013 they get prompted for credentials opening their outlook client and once they authenticate it states that it can't connect to exchange.
Checking their mail profile settings and I note that it still points to the 2010 FQDN
If I disable the Exchange RPC service on 2010 (effectively stopping any 2010 users from working) then the newly migrated user can open outlook fine (still gets an authentication prompt to which they must authenticate). Checking their mail profile their after
shows a series of numbers @ domain etc which is expected.
If it is a first logon user or you repair the profile the path updates too and Outlook works as expected.
Any thoughts?Neither of those suggestions work
Here is the ouput of OA
RunspaceId : 1e33ee6f-9627-43e3-823c-963debfe517e
ServerName : ex2013
SSLOffloading : False
ExternalHostname : webmail.domain.com
InternalHostname : ex2013.domain.com
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods : {Basic, Ntlm, Negotiate}
XropUrl :
ExternalClientsRequireSsl : True
InternalClientsRequireSsl : True
MetabasePath : IIS://ex2013.domain.com/W3SVC/1/ROOT/Rpc
Path : C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\rpc
ExtendedProtectionTokenChecking : None
ExtendedProtectionFlags : {}
ExtendedProtectionSPNList : {}
AdminDisplayVersion : Version 15.0 (Build 775.38)
Server : ex2013
AdminDisplayName :
ExchangeVersion : 0.20 (15.0.0.0)
Name : Rpc (Default Web Site)
DistinguishedName : CN=Rpc (Default Web Site),CN=HTTP,CN=Protocols,CN=ex2013,CN=Servers,CN=Exchange
Administrative Group (FYDIBOHF23SPDLT),CN=Administrative
Groups,CN=domain,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domain,DC=com
Identity : ex2013\Rpc (Default Web Site)
Guid : 956ac3b4-c426-4493-81c6-e6382f63aada
ObjectCategory : domain.com/Configuration/Schema/ms-Exch-Rpc-Http-Virtual-Directory
ObjectClass : {top, msExchVirtualDirectory, msExchRpcHttpVirtualDirectory}
WhenChanged : 27/01/2014 10:11:51 a.m.
WhenCreated : 23/01/2014 10:58:14 a.m.
WhenChangedUTC : 26/01/2014 9:11:51 p.m.
WhenCreatedUTC : 22/01/2014 9:58:14 p.m.
OrganizationId :
OriginatingServer : bddc01.domain.com
IsValid : True
ObjectState : Changed
RunspaceId : 1e33ee6f-9627-43e3-823c-963debfe517e
ServerName : ex2010
SSLOffloading : False
ExternalHostname : webmail.domain.com
InternalHostname :
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods : {Basic, Ntlm}
XropUrl :
ExternalClientsRequireSsl : True
InternalClientsRequireSsl : False
MetabasePath : IIS://ex2010.domain.com/W3SVC/1/ROOT/Rpc
Path : C:\Windows\System32\RpcProxy
ExtendedProtectionTokenChecking : None
ExtendedProtectionFlags : {}
ExtendedProtectionSPNList : {}
AdminDisplayVersion : Version 14.3 (Build 123.4)
Server : ex2010
AdminDisplayName :
ExchangeVersion : 0.10 (14.0.100.0)
Name : Rpc (Default Web Site)
DistinguishedName : CN=Rpc (Default Web Site),CN=HTTP,CN=Protocols,CN=ex2010,CN=Servers,CN=Exchange
Administrative Group (FYDIBOHF23SPDLT),CN=Administrative
Groups,CN=domain,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domain,DC=com
Identity : ex2010\Rpc (Default Web Site)
Guid : 4877f2f1-0af9-4ff2-82f3-c7f438b0d9fd
ObjectCategory : domain.com/Configuration/Schema/ms-Exch-Rpc-Http-Virtual-Directory
ObjectClass : {top, msExchVirtualDirectory, msExchRpcHttpVirtualDirectory}
WhenChanged : 27/01/2014 11:32:21 a.m.
WhenCreated : 26/01/2014 1:01:40 p.m.
WhenChangedUTC : 26/01/2014 10:32:21 p.m.
WhenCreatedUTC : 26/01/2014 12:01:40 a.m.
OrganizationId :
OriginatingServer : bddc01.domain.com
IsValid : True
ObjectState : Changed -
Profile Manager Error after logon
Greetings, I am working on getting profile manger working on 10.7.3. After turning profile manger I can get to a logon screen but after I logon I get this error in my browser. I am guessing the issue is with apache routing but I don't know.
Tim
{"redirect_url":"http://lion.cshardware.local/auth?redirect=http://lion.cshardware.local/devicema nagement/api/authentication/callback"}Okay, I have have solved this issue for my system it was two fold. 1. I had a DNS issue with my server. 2. I had an issue with a godaddy wild card certificate. The DNS issue was pretty easy to solve, the wild card certificate took some digging into. This issue was caused on how lion server was chaining the certificates. Lion for some reason added the star certificate twice before moving to the intermediate certificate. In the folder:
/etc/certificates/
Look for the files :
*.(FQDN).cert.pem
*.(FQDN).chain.pem
*.(FQDN).concat.pem
*.(FQDN).key.pem
Open the *.(FQDN).cert.pem and find out our start cert generally notice the last 8 or so characters.
then open *.(FQDN).chain.pem and check to see if your start(wildcard) cert is added twice if it is then remove one of them. Save the file and check the chaining to see if it errors out.
Sincerly,
Tim -
I have tried to enable this and after the message confirming my system has all the requirements I am allowed to activate it.
I did so and all I get (permanently) when I try to go to the portal is:
Service Temporarily Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Apache/2.2.19 (Unix) mod_ssl/2.2.19 OpenSSL/0.9.8r DAV/2 PHP/5.3.6 with Suhosin-Patch Server at xxxxxxxx.org Port 443
I am able to use Webmail etc, so I know the Apache is working otherwise. Incidentally the Calendar web app also gives this same reply.
Yes I have had lots of problems and this is after a clean install but after a migration of apps to my system.You might try stopping your services and then removing /etc/apache2/sites/0000_any_443_.conf and copying the .default files in that directory over top of their corresponding .conf files.
To do this in Terminal.app:
sudo -s
cd /etc/apache2/sites
rm 0000_any_443_.conf
cp 0000_any_80_.conf.default 0000_any_80_.conf
cp virtual_host_global.conf.default virtual_host_global.conf
I think you can make Server.app regenerate the config by clicking your server under "Hardware", then going to the "Settings" tab, then clicking "Edit" next to "SSL Certificate". Change it to "None" and then back to your certificate and click OK. This should make it regenerate all the configs.
And then finally, restart your services. -
PC Suite partially broken after migrating content ...
I have replaced my old E65 with a new one, as the old one has some problems. I did the backup and restored it on the new phone.
Synchronization works fine, but other functions, including messaging and backup/restore, are not working well.
The communications centre for instance, restored messages up to a certain date, and now is unable to load messages, as well as sending new ones from the PC (when I try the Communication Centre application hangs and I have to kill it). Backup/restore says it cannot open the communication channel with the phone (even if it is connected, with green PC Suite icon, by USB cable).
Any suggestion would be greatly appreciated.
Valerio
My configuration:
What version of Windows is being used? XP Professional
What Service Pack is installed? SP 2
What version of PC Suite is installed? 7.1.18.0
What is the connection method, cable, bluetooth or IR? Bluetooth and cableThank you for your suggestion. However backup/restore is one of the applications that doesn't work
It says it can't connect with the phone, while the phone icon in the tray is green...
One more thing: if I connect again the old phone, PC suite works perfectly. Does anybody know how to uninstall PC Suite libraries from the phone? I am almost sure there is something wrong in the phone.
- V -
After upgrading my server to Mavericks and Server.app version 3, those tools stopped to work properly :
calendarserver_export, calendarserver_manage_principals , etc...
When I enter this command, for example :
sudo calendarserver_export -u <account_name>
then this error is displayed :
Traceback (most recent call last):
File "/Applications/Server.app/Contents/ServerRoot/usr/sbin/calendarserver_export", line 32, in <module>
from calendarserver.tools.export import main
File "/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/cale ndarserver/tools/export.py", line 50, in <module>
from calendarserver.tools.cmdline import utilityMain, WorkerService
File "/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/cale ndarserver/tools/cmdline.py", line 21, in <module>
from calendarserver.tap.caldav import CalDAVServiceMaker, CalDAVOptions
File "/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/cale ndarserver/tap/caldav.py", line 87, in <module>
from twistedcaldav.upgrade import UpgradeFileSystemFormatStep, PostDBImportStep
File "/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/twis tedcaldav/upgrade.py", line 63, in <module>
from calendarserver.tap.util import getRootResource, FakeRequest, directoryFromConfig
File "/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/cale ndarserver/tap/util.py", line 87, in <module>
from txdav.base.datastore.subpostgres import PostgresService
File "/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/txda v/base/datastore/subpostgres.py", line 35, in <module>
import pgdb
File "/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/pgdb .py", line 66, in <module>
from _pg import *
ImportError: dlopen(/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/pytho n/_pg.so, 2): Symbol not found: _PQclear
Referenced from: /Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/_pg.s o
Expected in: flat namespace
in /Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/_pg.s o
All these tools have in common to access the caldav data via python, through PyGreSQL (caldav data is hosted in a postgres database).
I managed to reproduce very simply this problem by doing :
#login with root
bob $ sudo -i
#launch python and import pg (postgres module for python)
root $ python
>>> import pg
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/Library/Python/2.7/site-packages/PyGreSQL-4.1.1-py2.7-macosx-10.9-intel.egg/p g.py", line 31, in <module>
from _pg import *
ImportError: dlopen(/Library/Python/2.7/site-packages/PyGreSQL-4.1.1-py2.7-macosx-10.9-intel .egg/_pg.so, 2): Symbol not found: _PQclear
Referenced from: /Library/Python/2.7/site-packages/PyGreSQL-4.1.1-py2.7-macosx-10.9-intel.egg/_p g.so
Expected in: flat namespace
in /Library/Python/2.7/site-packages/PyGreSQL-4.1.1-py2.7-macosx-10.9-intel.egg/_p g.so
BUT, if I launch python from my user account (not root), I don't get the error. I assume there is something wrong with the path, or something similar, but I can't find what...
Although I need to have root credentials to be able to use calendarserver_export.
Any clues ??I did, and now I get this :
root $ calendarserver_export -u <username>
Traceback (most recent call last):
File "/Applications/Server.app/Contents/ServerRoot/usr/sbin/calendarserver_export", line 32, in <module>
from calendarserver.tools.export import main
File "/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/cale ndarserver/tools/export.py", line 50, in <module>
from calendarserver.tools.cmdline import utilityMain, WorkerService
File "/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/cale ndarserver/tools/cmdline.py", line 21, in <module>
from calendarserver.tap.caldav import CalDAVServiceMaker, CalDAVOptions
File "/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/cale ndarserver/tap/caldav.py", line 87, in <module>
from twistedcaldav.upgrade import UpgradeFileSystemFormatStep, PostDBImportStep
File "/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/twis tedcaldav/upgrade.py", line 63, in <module>
from calendarserver.tap.util import getRootResource, FakeRequest, directoryFromConfig
File "/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/cale ndarserver/tap/util.py", line 87, in <module>
from txdav.base.datastore.subpostgres import PostgresService
File "/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/txda v/base/datastore/subpostgres.py", line 35, in <module>
import pgdb
File "/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/pgdb .py", line 66, in <module>
from _pg import *
ImportError: dlopen(/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/pytho n/_pg.so, 2): Symbol not found: _PQclear
Referenced from: /Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/_pg.s o
Expected in: flat namespace
in /Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/_pg.s o -
Exchange profile parameter problem after system copy of XI server
I'm getting problem after the system copy of XI server. Following is the details. pls help to fix this one:
XQA is the system copy of XDV server. XQA is installed on rx2n1v1 server and XDV is installed on dbcixdv server. Following is weblink of XQA and XDV.
XQA: http://rx2n1v1:57400
XDV: http://dbcixdv:57000
After the system copy of XQA, i changed all xdv related parameters (hostname/port) in visual admin and configtool of XQA server.
Now when i run sxmb_ifr tcode in XQA, it should open the link of XQA server ( http://rx2n1v1:57400). But it open the link of XDV server (http://dbcixdv:57000).
The cause of this problem is the xdv parameter entires (hostname/portnumber of xdv) in exchange profile of XQA server (http://rx2n1v1:57400/exchangeProfile).
Now if i change hostname/portnumber of xdv in XQA server (http://rx2n1v1:57400/exchangeProfile), it also make the same change in XDV server (http://dbcixdv:57000/exchangeProfile).
Both XQA and XDV are in differnet hardware server. I don't understand why making changes of exchangeprofile in XQA also changed the value of exchangeprofile in XDV.
Hope it clarify.
Pls give the solution of this problem.
Thanks
AmarArjun,
http://<SAPHOSTNAME>50000/exchangeProfile
Yes, I can use above, but changing connection information gives me
RFC call returned an error code: 399
Use this one
http://hostname:50000/webdynpro/dispatcher/sap.com/com.sap.xi.exprofui/XIProfileApp
This one, yes I get to the exchange give me an error: RFC call returned an error code: 399
http://hostname:50000/dir/start/index.jsp -->Administration -->login with PISUPER -->ExchangeProfile.
Internal Error
Internal error; contact your system administrator
Unable to read configuration data (ExchangeProfile/aii.properties) -
Password problem after migrating to Mountain Lion Server
Hello everyone,
Yesterday, I migrated our Lion Server to Mountain Lion Server. Everything seemed to work fine. Except since this morning, none of the network user cannot connect to their calendar, reminders, and wiki. They can connect to their account and to their mails. The following line appears multiple times in ApplePasswordServer.Error.log:
Aug 16 2012 16:52:50 700250us client response doesn't match what we generated
It seems that only web services are concerned (vpn, mobile accounts, and mails are working). My initial guess is that the hash computed on the basis of the user password is not computed on the same way on the client machine (which is running Mountain Lion by the way) and on the server. On the other hand, this would be very surprising, since all this stuff is based on standards and unlikely to have changed since Lion.
I tried to create a new "Test" user. Even this new user, created after the migration, cannot connect to its calendar, etc. I also tried to reset my user password using the Server App. It makes no difference, the same lines appear in the logs.
Is anyone experiencing a similar problem ? Does anyone have a clue of what to try next ?
Thanks a lot !I found out the following:
After looking at the contents of the password server database using the slot numbers of several user accounts, it seems that all users where WEBDAV-DIGEST authentication is failing, have two entries for the digest method "*cmusaslsecretDIGEST". This is obviously wrong. All users who can authenticate successfully have only one such entry.
Deleting and recreating the user account has no effect. In fact, updating the password server with a new entry may actually trigger this error. It could be that all users where this is failing have changed their passwords after the server was updated to Mountain Lion.
It would be interesting to know if you also see duplicate entries for "*cmusaslsecretDIGEST" in the database. You can display a password server record via the user account's slot number (in your example, the 0xd6ace...) using the command
sudo mkpassdb -dump <slot-number>
At the end of the record dump, you should see 10 digest entries with their method identifiers. -
ADWS Broken after in-place upgrade from Server 2008 R2 to Server 2012 R2
I performed an in-place upgrade from 64-bit Server 2008 R2 to Server 2012 R2. This machine ran Active Directory Web Services. After the upgrade ADWS will not start. I get the following event log error:
Log Name: Application
Source: .NET Runtime
Date: 11/21/2014 3:23:02 PM
Event ID: 1026
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: COMPUTER
Description:
Application: Microsoft.ActiveDirectory.WebServices.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.ServiceModel.CommunicationObjectFaultedException
Stack:
at System.ServiceModel.Channels.CommunicationObject.Close(System.TimeSpan)
at Microsoft.ActiveDirectory.WebServices.WindowsHostService.StartService(System.Object)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
at System.Threading.ThreadHelper.ThreadStart(System.Object)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name=".NET Runtime" />
<EventID Qualifiers="0">1026</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-11-21T20:23:02.000000000Z" />
<EventRecordID>65596</EventRecordID>
<Channel>Application</Channel>
<Computer>COMPUTER</Computer>
<Security />
</System>
<EventData>
<Data>Application: Microsoft.ActiveDirectory.WebServices.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.ServiceModel.CommunicationObjectFaultedException
Stack:
at System.ServiceModel.Channels.CommunicationObject.Close(System.TimeSpan)
at Microsoft.ActiveDirectory.WebServices.WindowsHostService.StartService(System.Object)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
at System.Threading.ThreadHelper.ThreadStart(System.Object)
</Data>
</EventData>
</Event>I compared the registry with a working system but the Counters - and all other keys - looked fine.
At the same time as upgrading a DC a colleague was updating an unrelated server, and he started to see similar events in the event log (but for the Dell OpenManage Essentials service, not ADWS). The error was complaining about KERNELBASE.dll which set my
spider sense tingling. We knew that this server had Windows Updates pending. Fully updating it solved the problem on that server.
I solved the ADWS problem in the end by fully Windows Updating the DC. In particular, the ADWS Service started successfully after installing KB2919355 and rebooting. That also
'unlocked' a further 59 updates pending.
After the in-place upgrade I always fully Windows Update but I'm 99% certain that KB2919355 did NOT show up when I did a Check for Updates straight after a reboot so I thought the DC was up-to-date. I then spent hours investigating the ADWS problem and rebooted
as part of the diagnostics. It was then that I noticed on the logon screen that there were updates pending...
Moral of the story? Windows Update, then Update again, and again, and again. The length of time it takes to Windows Update after an upgrade from 2008R2 to 2012R2 is painful though.
Maybe you are looking for
-
How to execute procedure in SQL Worksheet ?
Hi, anybody know, how I can execute procedure here? I try EXEC sec_roles, EXEC security_admin.sec_roles, EXECUTE - there is a SQL statement error. When I use CALL - there is no such procedure (I have execute previleges). Although in SQLPlus EXEC work
-
Hello All, I have a Muse HTML item placed on the page... the contents contain the following: <div class="bodyarea"> {tag_pagecontent} </div> .bodyarea is stored in a style sheet outside of muse.... When I publish to Catalyst from Muse, my "Page Conte
-
JDBC receiver adapter: Insert of CLOB into Oracle DB
Hi, I've got a short question: Is it possible to insert CLOB fields (larger than 4kB) into an Orcale database using the JDBC receiver adapter without using a stored procedure? We are on XI 3.0 SP20. I had someting in mind that this is only possible w
-
Hello! I am using EPM 11.1.2.1. Can I in one report (financial reporting studio) in one column display MemberName and in the second column - an ALIAS of this member (member name and alias of one dimension in different columns) Big thanks!
-
Installation of the ABAP System
Hi, During the second Installation Step of the SAP Netweaver 04 SR1 ABAP System the Installtion stops with the ERROR FSL-02015 and MSC-01003. What is the meaning of theses Messages ?