Profile manager settings device management disabled error when enabling

Hello,
I have installed OS-X Lion on a mac mini. Everything is working fine, including open ldap as a master where other imac can connect and use this ldap server for login.
However in profile management i try in the settings section to enable management of devices. When the wizard starts it asks me to enter the password for diradmin as this server needs a master ldap (is already there).
The wizard then mentions that this computer already has a master ldap server and i cannot continue installing device management in profile manager.
Probably because of this I cannot see devices in the profile manager portal.
Does anyone have a solution to solve this issue.
Thanks
Paul Bot

I would try demoting your Open Directory server from Master to Standalone in the Server Admin app - there's an assistant in Server Admin > Open Directory > Settings > General > click the change button.
Once it's demoted to a standalone, restart.
From there, don't create an OD Master again - go to Profile Manager in Server.app and run through the wizard again. In the process, it will create an OD Master for you.
Hope that helps,
Chris

Similar Messages

No security manager: RMI class loader disabled Error at RMI client programm

Got following error on invoking remote method from RMI client,
java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.lang.ClassNotFoundException: com.rmi.RmiImpl_Stub (no security manager: RMI class loader disabled)
Please let me know solution.

Hello JAAZ,
I got the same error yesterday. I was a little frustrated, because the day before everything was fine...
java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.lang.ClassNotFoundException: uk.co.it.ete.server.ETE_Server (no security manager: RMI class loader disabled)
at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)The solution was, that I did some refactoring and some of the classes were now in different packages. I updated the system on the client-side and now everything works again.
I think debugging RMI-applications is not as easy as "normal" applications ..
maybe this helps..
Regards
tk

No hardware profiles, nothing in device manager

no hardware profiles and nothing in device manager.

Hi,
Go into Device Manager and check your viewing options.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

HP Device Not Found Error when trying to print or scan wireless- HP Officejet Pro L7590

Have had HP Officejet Pro L7590 All-In-One Printer for years. Always worked fine and I had no issues printing via wireless connection. Several months ago.. Possibly after a Windows 8 update. From Windows 8 to Windows 8.1 I have not been able to use the printers wireless feature. When I try to print or scan it shows the printer as offline. Also get an error message that tells me "HP Imaging device is not found". I can still print when connected to USB. Cannot scan or use features of the HP software suite. I have tried several times to correct. Reloading the software and drivers several times, but no success. I just tried again and was able to print the test page wireless, so got all excited and thought I fixed it. Then tried to print something and got the same error message I have seen in the past. I have talked to certain supports saying that it may be a firewall setting within Windows. Any other suggestions? Thanks

Hi @rfjones002,
Welcome to the HP Support Forums! I see you are not able to print or scan wirelessly to your HP Officejet L7590 and your computer running the Windows 8.1 Operating system. You get a 'Printer offline' or 'HP Imaging device not found' errors.
I would like you to start with the steps listed below:
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Uninstall the software again - Uninstall the Printer Software Instructions
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /unregister
and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type
msiexec /regserver
and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayerflashplayer/downloads.html
Perform a clean boot > How to perform a clean boot in Windows
Download the following SP40669 File Download - if this does not download and or install please proceed to the next step.
Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
- Image source
Now you can go ahead and download and install the software here >
HP Officejet Pro Full Feature Software and Driver
If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

"USB Device Not Recognized" error when I connect iPod to my PC

I have a brand new 5th gen (I think) iPod.
I have been able to connect it successfully to my home laptop, download music to it and play it so I know the iPod works per se and the cable is ok too.
Now at work (where tons of my music is) when I connect it to my PC here and I get a "USB Device Not Recognized" error pops up from my taskbar. When I click on the message it pops up a "USB Device Not Recognized" window which displays a list of USB ports, and shows "Unknown Device" for the one where the iPod is connected.
I think its probably USB1.something as opposed to USB2.0 but from what I understand that shouldn't matter.
Can anyone suggest anything ?
I've tried the 5R's as far as I can, and I read through this thread:
http://discussions.apple.com/thread.jspa?threadID=500559&tstart=15
but there didn't seem to be anything conclusive.
Thanks for any help,
Jill

First make sure the latest iTUnes is installed on this work PC, IF your allowed to install things on it, the latest iTunes version is 6.0.4.2 and can be downloaded from the apple site (Hit iPod+iTunes tab at the very top of this web page)
Another thing is what version of windows is the work PC? Is it windows XP Windows 2000 Or windows Me 98? iTunes will only run on XP and 2000

AWM error when enabling for discoverer.

Hi,
I am experiencing some difficulties enabling my analytic workspace for discoverer. I have a created a workspace based on a cube with 1 fact and 2 dimensions. I used Oracle Enterprise Manager 9.2.0.1.0 to create my meta data and AWM 9.2.0.4.1D to create the workspace. When I enable for discoverer plus in AWM it takes me through the wizard and at the end when I click on finish, I get an absolutely non descriptive error...it is: "dataprovider error initializing the AW". I go to the awmrun.log file to see what happened, and it is also confusing. There is a SQLException underneath, but it doesn't say what the overflow was on:
Error java.sql.SQLException: Overflow Exception
Error in Exporting = dataprovider error initializing the AW
oracle.DiscovererXML.AWExportException: dataprovider error initializing the AW
at oracle.DiscovererXML.EULExport.<init>(EULExport.java:46)
at oracle.olap.awm.wizard.export.ExportWizard.exportToDisco(ExportWizard.java:208)
at oracle.olap.awm.wizard.export.PageExportReviewObjects.onLeavePage(PageExportReviewObjects.java:69)
at oracle.olap.awm.ui.wizard.Wizard.wizardSelectionChanged(Wizard.java:143)
at oracle.bali.ewt.wizard.BaseWizard.processWizardEvent(Unknown Source)
at oracle.bali.ewt.wizard.BaseWizard.processEventImpl(Unknown Source)
at oracle.bali.ewt.LWComponent.processEvent(Unknown Source)
at oracle.bali.ewt.wizard.BaseWizard.selectPage(Unknown Source)
at oracle.bali.ewt.wizard.BaseWizard.selectPage(Unknown Source)
at oracle.olap.awm.wizard.export.ExportWizard.exportToDisco(ExportWizard.java:233)
at oracle.olap.awm.wizard.export.PageExportReviewObjects.onLeavePage(PageExportReviewObjects.java:69)
at oracle.olap.awm.ui.wizard.Wizard.wizardSelectionChanged(Wizard.java:143)
at oracle.bali.ewt.wizard.BaseWizard.processWizardEvent(Unknown Source)
at oracle.bali.ewt.wizard.BaseWizard.processEventImpl(Unknown Source)
at oracle.bali.ewt.LWComponent.processEvent(Unknown Source)
at oracle.bali.ewt.wizard.BaseWizard.selectPage(Unknown Source)
at oracle.bali.ewt.wizard.BaseWizard.doNext(Unknown Source)
at oracle.olap.awm.wizard.export.ExportWizard.doNext(ExportWizard.java:131)
at oracle.bali.ewt.wizard.BaseWizard$Action.actionPerformed(Unknown Source)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
....rest of stack not pasted here.
Can anyone provide insight into what is going on? Thanks very much!
Piyush

i have made a little more progress with this.
i am not having any problems with users that are created via exchange using New-Mailbox
it is only user accounts that have been enabled for exchange that are causing problems via Enable-Mailbox.
Both user accounts are in the Same OU, have same UM Dial Plan.
i have run a compare of security permissions using dcacls and there is a difference. mainly on an attribute called Group.
i have checked the security permissions and group membership and can't see it listed anywhere. please see output below:
compare-object $broken $working
InputObject SideIndicator
Group: XX\Domain Computers =>
Inherited to inetOrgPerson =>
Inherited to computer =>
Inherited to inetOrgPerson =>
Inherited to group =>
Inherited to contact =>
Inherited to inetOrgPerson =>
Group: XX\Domain Admins <=
any idea how when enabling a mailbox exchange can ensure it has the correct permissions on it?

EDSCannotAccessSession error when enabling email

I'm using 10.5 server for Email, iChat, Calendar, and AFP on an Intel XServe. Everything has been going smoothly for a few months but in the last month when I've tried to enable email to any users in Workgroup manager I get the following error which prevents saving the changes: "Error of type eDSCannotAccessSession (-14006) on line 274 of /SourceCache/WorkgroupManager/WorkgroupManager-319.1.1/Plugins/UserAccounts/Use rMailPluginView.mm"

i have made a little more progress with this.
i am not having any problems with users that are created via exchange using New-Mailbox
it is only user accounts that have been enabled for exchange that are causing problems via Enable-Mailbox.
Both user accounts are in the Same OU, have same UM Dial Plan.
i have run a compare of security permissions using dcacls and there is a difference. mainly on an attribute called Group.
i have checked the security permissions and group membership and can't see it listed anywhere. please see output below:
compare-object $broken $working
InputObject SideIndicator
Group: XX\Domain Computers =>
Inherited to inetOrgPerson =>
Inherited to computer =>
Inherited to inetOrgPerson =>
Inherited to group =>
Inherited to contact =>
Inherited to inetOrgPerson =>
Group: XX\Domain Admins <=
any idea how when enabling a mailbox exchange can ensure it has the correct permissions on it?

I get "INTERFACE_QUARANTINED due to Cmd Failure" error when enabling PortChannel in n1kv

I have added a new host to my n1kv, but the interface PortChannel3 appears to be in shutdown and I can't bring it up, despite of it is working.
SW-OUT-N1KV# sh int status
Po3            --                 up       trunk     full    1000    --
SW-OUT-N1KV# sh port-channel sum
Flags: D - Down        P - Up in port-channel (members)
        I - Individual H - Hot-standby (LACP only)
        s - Suspended   r - Module-removed
        S - Switched    R - Routed
        U - Up (port-channel)
Group Port-       Type     Protocol Member Ports
      Channel
1     Po1(SD)     Eth      NONE      Eth3/2(r)
2     Po2(SU)     Eth      LACP      Eth4/5(P)    Eth4/6(P)
3     Po3(SU)     Eth      LACP      Eth5/5(P)    Eth5/6(P)
4     Po4(SU)     Eth      LACP      Eth4/1(P)    Eth4/2(P)    Eth4/3(P)
                                     Eth4/4(P)
5     Po5(SD)     Eth      LACP      Eth5/1(D)    Eth5/2(D)    Eth5/3(D)
                                     Eth5/4(D)
6     Po6(SD)     Eth      NONE      --
SW-OUT-N1KV# sh run int po3
!Command: show running-config interface port-channel3
!Time: Thu Jan 5 18:00:08 2012
version 4.2(1)SV1(4)
interface port-channel3
inherit port-profile SYSTEM-UPLINK
shutdown
When I try to enable it, I get the following error:
SW-OUT-N1KV(config)# int po3
SW-OUT-N1KV(config-if)# no shut
2012 Jan 5 18:00:51 SW-OUT-N1KV %PORT-PROFILE-2-INTERFACE_QUARANTINED: Interface port-channel3 has been quarantined due to Cmd Failure
The "show logging logfile" and "show accounting log" shows nothing.
Any idea why is it happening????
Other outputs,
SW-OUT-N1KV(config-if)# do sh run port-profile SYSTEM-UPLINK
!Command: show running-config port-profile SYSTEM-UPLINK
!Time: Thu Jan 5 18:02:46 2012
version 4.2(1)SV1(4)
port-profile type ethernet SYSTEM-UPLINK
vmware port-group
switchport mode trunk
duplex auto
speed auto
switchport trunk native vlan 666
switchport trunk allowed vlan 2,43-44
cdp enable
channel-group auto mode active
no shutdown
system vlan 2,43-44
state enabled
SW-OUT-N1KV(config-if)# do sh port-prof virt usag
Port Profile               Port        Adapter        Owner
SYSTEM-UPLINK              Po1
                           Po2
                           Po3
                           Eth4/5      vmnic4         10.100.100.63
                           Eth4/6      vmnic5         10.100.100.63
                           Eth5/5      vmnic4         10.100.100.64
                           Eth5/6      vmnic5         10.100.100.64
IESE_CONTENIDO             Veth9       Net Adapter 1 IESECMPRO
                           Veth14      Net Adapter 1 IESEAUTOPRO
IESE_BACKEND               Veth10      Net Adapter 1 IESEDBINTPRE
                           Veth11      Net Adapter 1 IESEDBPRO
IESE_PRE_INT               Veth3       Net Adapter 1 IESEWEBPRE
                           Veth4       Net Adapter 1 IESEAPPINT
                           Veth5       Net Adapter 1 IESEAPPPRE1
                           Veth6       Net Adapter 1 IESEAPPPRE2
                           Veth7       Net Adapter 1 IESEAUTOPRE
                           Veth8       Net Adapter 1 IESECMINTPRE
DATA-UPLINK-100m           Po6
SERVICE-CONSOLE            Veth1       vmk0           Module 4
                           Veth2       vmk1           Module 4
                           Veth12      vmk0           Module 5
                           Veth13      vmk1           Module 5
DATA-UPLINK-IESE           Po4
                           Po5
                           Eth4/1      vmnic0         10.100.100.63
                           Eth4/2      vmnic1         10.100.100.63
                           Eth4/3      vmnic2         10.100.100.63
                           Eth4/4      vmnic3         10.100.100.63
                           Eth5/1      vmnic0         10.100.100.64
                           Eth5/2      vmnic1         10.100.100.64
                           Eth5/3      vmnic2         10.100.100.64
                           Eth5/4      vmnic3         10.100.100.64

Debugging port-profile errors, and trying agair, I get the following output:
SW-OUT-N1KV(config-port-prof)# no shut
2012 Jan 9 14:43:02.102017 port-profile: (ERR) ppm_fq_cmd_intf_range_get(1753): Failed to find intf tlv ^Yex^Yconf^Yport-profile DATA-UPLINK-IESE-SA^Yno shutdown error: Command Parsing Failed
2012 Jan 9 14:43:02.102577 port-profile: (ERR) ppm_profile_fsm_session_get(71): RID before session start request is 1
2012 Jan 9 14:43:02.106573 port-profile: (ERR) ppm_req_dbmgr_send(426): Changing session status: 0x0
2012 Jan 9 14:43:02.443092 port-profile: (ERR) ppm_vppm_profile_acfg_gen(353): VPPM Profile Level -1 acfg generation failed Error: no such pss key (0x40480003)
2012 Jan 9 14:43:03.048365 port-profile: (ERR) ppm_pending_req_queue_check(1035): msg_ref_p->state == 0xbba6e3cc
SW-OUT-N1KV(config-port-prof)# 2012 Jan 9 14:43:03.373461 port-profile: (ERR) ppm_pending_req_queue_check(1035): msg_ref_p->state == 0xbba6e3cc
SW-OUT-N1KV(config-port-prof)# channel-group auto mode active
2012 Jan 9 15:37:32.338832 port-profile: (ERR) ppm_fq_cmd_intf_range_get(1753): Failed to find intf tlv ^Yex^Yconf^Yport-profile type ethernet DATA-UPLINK-IESE-SA^Ychannel-group auto mode active error: Command Parsing Failed
2012 Jan 9 15:37:32.339399 port-profile: (ERR) ppm_profile_fsm_session_get(71): RID before session start request is 1
2012 Jan 9 15:37:32.358546 port-profile: (ERR) ppm_db_port_channel_check(7068): Not a channel grp command.
2012 Jan 9 15:37:32.360130 port-profile: (ERR) ppm_req_dbmgr_send(426): Changing session status: 0x0
2012 Jan 9 15:37:32.651020 port-profile: (ERR) ppm_vppm_profile_acfg_gen(353): VPPM Profile Level -1 acfg generation failed Error: no such pss key (0x40480003)
2012 Jan 9 15:37:33.181682 port-profile: (ERR) ppm_pending_req_queue_check(1035): msg_ref_p->state == 0xbba6e3cc
2012 Jan 9 15:37:33.387996 port-profile: (ERR) ppm_find_intf_in_cache(917): No pending plan present
2012 Jan 9 15:37:34.772375 port-profile: (ERR) ppm_pending_req_queue_check(1035): msg_ref_p->state == 0xbba6e3cc
2012 Jan 9 15:37:34.774586 port-profile: (ERR) ppm_profile_fsm_session_get(71): RID before session start request is 1
SW-OUT-N1KV(config-port-prof)# 2012 Jan 9 15:37:35.102895 port-profile: (ERR) ppm_vppm_profile_acfg_gen(353): VPPM Profile Level -1 acfg generation failed Error: no such pss key (0x40480003)
2012 Jan 9 15:37:35.469793 port-profile: (ERR) ppm_config_merge_handler(773): Show run merge not performed with reason PPM show run merge is not required
2012 Jan 9 15:37:35.502211 port-profile: (ERR) ppm_cmd_desc_create(1176): command to be ignored parsed mode:/exec/configuremode: /exec/configure cmd:version 4.2(1)SV1(4) error: Command is not a port-profile command
2012 Jan 9 15:37:35.503417 port-profile: (ERR) ppm_cmd_desc_create(1265): interface command detected ^Yex^Yconf^Yinterface port-channel5, error: Interface command is given for cmd desciptor
2012 Jan 9 15:37:35.510826 port-profile: (ERR) ppm_req_dbmgr_send(426): Changing session status: 0x0
2012 Jan 9 15:37:59.800813 port-profile: (ERR) ppm_dispatcher_invoker(542): Invoker parent failed with Err[0x1400]
2012 Jan 9 15:37:59.832496 port-profile: (ERR) procjobcb_job_done(686): status: 0x1400, (null)
2012 Jan 9 15:37:59.837319 port-profile: (ERR) ppm_profile_fsm_sma_apply_acc(1250): Changing session status: 0x420c007c
2012 Jan 9 15:37:59.837732 port-profile: (ERR) ppm_profile_fsm_sma_apply_acc(1252): apply status: 0x1400
2012 Jan 9 15:37:59.838435 port-profile: (ERR) ppm_profile_fsm_sma_apply_acc(1277): Could not open the file /dev/shm/ppm_DATA-UPLINK-IESE-SA_output.txt
2012 Jan 9 15:37:59.800813 port-profile: (ERR) ppm_dispatcher_invoker(542): Invoker parent failed with Err[0x1400]
2012 Jan 9 15:37:59.832496 port-profile: (ERR) procjobcb_job_done(686): status: 0x1400, (null)
2012 Jan 9 15:37:59.837319 port-profile: (ERR) ppm_profile_fsm_sma_apply_acc(1250): Changing session status: 0x420c007c
2012 Jan 9 15:37:59.837732 port-profile: (ERR) ppm_profile_fsm_sma_apply_acc(1252): apply status: 0x1400
2012 Jan 9 15:37:59.838435 port-profile: (ERR) ppm_profile_fsm_sma_apply_acc(1277): Could not open the file /dev/shm/ppm_DATA-UPLINK-IESE-SA_output.txt
2012 Jan 9 15:37:59 SW-OUT-N1KV %PORT-PROFILE-2-INTERFACE_QUARANTINED: Interface port-channel5 has been quarantined due to Cmd Failure
Any idea? I'm lost...

8.81 B1iC error when enabling Dashboard Widget

Hi,
In the B1 client when enabling the Dashboards (Cockpit -> General Settings -> Enable Dashboard Widget) I get the following error in red at the bottom of the screen (and in the client message log):
Install SAP Business One Integration Service before enabling the dashboard widget Message ID = 1290000001
I have a clean install of 8.81 PL00 and the Integration Component, company database is a new a demo database (SBODemoAU).
The B1iC install created the correct SLD and I have tested the B1DI & JDBC connections and both report successful connections.
There is also a successful message in the Integration Framework message log for trigger object 1210000008 which I believe from the doco and previous versions that this is the Dashboard deployment to the Bizstore.
I have gone through the B1iC Troubleshooting guide as much as possible (it does not yet have the 8.81 updates) but nothing helps.
I understand the B1iServer address is now automatically created in 8.81 but how do I check the correct value and fix this problem.
I have spent a few days on this trying different things, sniffing the network, analyzing SQL calls, so any help would be appreciated.

I too am finding the same issues. Am on 8.81 PL7. (8.81.315). B1DI and JDBC test good. Cockpit at Company level enabled. Enable dashboard widget does not work. I receive "Ensure that SAP Business One Integration Service and SAP Business One Event Sender Service have been started; then wait 1 minute and try again" Both are running and have been for 24 hours.
From an earlier post about port 8443, here is an extract from my C:\Program Files (x86)\SAP\SAP Business One Integration\B1iServer\Tomcat\conf\server.xml
-->
<Connector port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" enableLookups="false" server=" "/>
    <Connector executor="tomcatThreadPool"
               port="8080" protocol="HTTP/1.1"
               connectionTimeout="20000"
               redirectPort="8443" />
    -->
          
     <Connector port="8009" protocol="AJP/1.3" redirectPort="8443"/>
Any thoughts on how to resolve?

Displaying errors when Enable automatic error handling option is on

In order to display error messages do I need general or simple error handler to implement if I have Enable automatic error handling on?
Solved!
Go to Solution.

Both will (optionally) display a popup when an error occurs. The general error handler just has more options for special cases. The simple error handler is typically sufficient.
If you havce automatic error handing enabled, you'll get a popup whenever a function generates an error AND the error output is not wired. Once you wire an error handler, the automatic error handling will no longer occur.
To display an error, you can also just place a plain error indicator on the front panel. This avoids annoying popup messages.
LabVIEW Champion . Do more with less code and in less time .

Cash Management / Payables: APP-SQLAP-10786 error when unreconciling

Hi,
We are trying to unreconcile a payment in Cash Management but Oracle gives us an error:
APP-SQLAP-10786: No payments were found to reconcile. (DEBUG_INFO=checkrun is null, recon flag is Y, before select)
Can anyone assist?
This transaction was entered for a prior accounting period which is now closed.
In AP, the status of the payment batch is 'Confirmed' though the Payments status is 'Reconciled Unaccounted'.
Thanks.
Message was edited by:
HowlsFury

Have a look at the following notes:
Note: 467404.1 - APP-SQLAP-10006 when trying to create new payment in APXPAWKB and using a Folder
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=467404.1
Note: 316797.1 - Apxpawkb App-Sqlap-10006 The Date You Entered Is Not In Open Accting Period
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=316797.1
Note: 228622.1 - APXINWKB APP-SQLAP-10006 : The Date You Entered Is Not In An Open Accounting Period
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=228622.1

How do you stop an iOS device from disabling itself when the wrong passcode is entered too many times?

At my school we use iPads for all our work etc. However, the idiots in my form grabbed my iPad and googled ****, which got me kicked off the school Wi-Fi of course. To stop this happening again, i put a passcode lock on, but now it amuses them to continually enter the wrong password which disables it, and then I cannot use it in lessons and I can't get access to my notes etc. This is really affecting my performance at school and the teachers are lazy idiots who wont do anything about it. Is there any way to stop this other than jailbreaking my iPad, or killing them?

So what exactly do you propose I do when i'm trying to work on it in a class, and then the iPad is wrenched out of my hands by my ‘pleasant group of peers’? (I’ll refrain from using the term ‘Idiots in my form’ seeing as you know them so well, and are therefore able to pass judgment on their general conduct.) With regards to your comment about showing respect to my elders, I usually do, however if a teacher chooses to allow the children in their conduct to do whatever they please, and cause as much trouble as possible, I will refer to them as lazy, because their behaviour as a teacher equates to the definition of lazy (1 unwilling to work or use energy: he was too lazy to cook. 2 characterized by lack of effort or activity: they were enjoying a really lazy holiday. 3 showing a lack of care). Also, i’d like to emphasize that my poor performance is a DIRECT result of my the iPad being disabled. That would be because ALL of my work is on there, along with all of my textbooks and most of the other educational tools that we use. It may be easy for you to slam me for sounding like a whiny little ****, however imagine if all of your learning material was routinely removed from your person in a lesson, and you had to work with others, and make notes, which you will later have to type up, during valuable revision or homework time. After all of that disagreement with you, I do accept that I shouldn’t threaten to kill people, however I would like to stress that you may need to reassess your sense of humor, as you have obviously failed to detect that I was making a light hearted joke. I am sure that I do not possess the physical and metal requirements in order to kill someone.

Getting "HP imaging device not found" error when trying to use the scanner in mountain lion. Anyone else have this problem?

The odd thing is the printer works, but the scanner isn't recognized.
I ran the latest Mac software update first, and then reinstalled the HP software. I checked all the settings as suggested from the HP site, but nothing seems to work.
Has anyone had this problem and found a solution?
Thanks
Steven

The odd thing is the printer works, but the scanner isn't recognized.
I ran the latest Mac software update first, and then reinstalled the HP software. I checked all the settings as suggested from the HP site, but nothing seems to work.
Has anyone had this problem and found a solution?
Thanks
Steven

Cannot find device or file error when installing 6.1 from cd or from hard drive

installation error - LabVIEW 6.1 AUG 2000 - this is the only software I had a problem installing

Contact NI for support at ni.com/ask. You will need to provide extensive information about your system.

HT201351 I HAVE BEEN GETTING MESSAGE ON IPHONE 5C SAYING DEVICE IS DISABLED THATS WHEN I PUT PREVIOUS OWNERS ID IN

I HAVE AN I PHONE 5C AND CANT GET IT TO DISABLE THE ACCOUNT FROMPREVIOUS OWNER

Only the previous owner can remove the activation lock. Talk to them about it.

Profile manager settings device management disabled error when enabling

Similar Messages

Maybe you are looking for