Profile name
Is it possible for either one of you admins to change my profile name? as in my username when people add me.
You can change your display name however Skype names cannot be changed. If you require a different Skype name you would have to create a new account.
Similar Messages
-
I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings? Please help. Thanks.
You should have asked this before you tried: Changing username or short name- User Account and Short Name- OS X- How to change user account name or home directory name.
-
Significance of profile name in configuration profile
Hi all experts in SD,
I am involved in variant configuration. I had a little confusion, for which i had searched the forum but dint find any relevant topic.
While creating configuration profile with CU41 of a configurable material we need to enter 'profile name' . We can enter many profile names for a single configuration profile. I am confused over it that what exactly is the need for having many profile names for a single configuration profile.
What i can infer is that with many profile names being provided in the configuration profile the single configurable material material can be used with many names in different scenarios.
Please do correct me if i am wrong . If at all i m true then also please provide me some more information related to it.
Thanks in advance for the solution.
Regards,
Gaurav Kumaru need to check with the sap website
-
Change profile name in iMessage
how do I change the profile name "jabber" on imessage?
Hi Simon,
Happy Holidays! Are you trying to change the name of the Jabber service on your Mac? Here's how:
Mac Basics: Messages helps you chat instantly - Apple Support
http://support.apple.com/en-us/HT202549
In Messages select Messages > Preferences.
Click the Accounts button.
Select the Jabber account on the left.
In the Account Information tab, change the Description field to whatever name you want.
Close the Accounts window (red dot in top-left corner).
Quit Messages and then launch the application again.
I hope this information helps ....
- Judy -
Determine ICC output profile (name) in PDF/X output intent
Hi all,
I have a PDF of which I need to determine the ICC output profile (name) of the PDF/X output intent. This is what I have in the 'content stream':
<</Metadata 6 0 R/OutputIntents[<</DestOutputProfile 7 0 R/Info(OFCOM. ISO 12647-2:2004 / Amd 1, Offset commercial and specialty printing according to ISO 12647-2, paper type 1 or 2 \(gloss or matte coated offset, 115 g/m2\), screen frequency 60/cm.)/OutputConditionIdentifier(FOGRA39)/RegistryName(http://www.color.org)/S/GTS_PDFX/Type/OutputIntent>>]
How can I, based on this information, determine what the name of the ICC profile in the PDF/X output intent is? Adobe Acrobat's output preview tells me that is should say / find ''ISO Coated v2 300% (ECI)'.
Thanks in advance.
DidierThanks! Thought it would be something in that direction. Any tools or libraries you might know that can be used to extract and parse this kind of information (as part of a preflight process or something else)? Adobe tools for instance?
-
I did not know how to get the profile name in photoshop file using javascript? Kindly help me.
var myDocProfile = app.activeDocument.colorProfileName;
-
RADIUS/DECODE: parse unknown cisco vsa "profile-name" - IGNORE
Dear Team,
I have faced an issue with dot1x mab authorization between cisco switch 3750 and ISE 1.1. I have cisco IP phone connected on port # gig1/0/1 to authenticated through MAB with cisco ISE
int gig 1/0/1
switchport mode access
switchport access vlan 9
switchport voice vlan 410
authentication order mab dot1x
authentication priority dot1x mab
spanning-tree portfast
authentication host-mode multi-domain
authentication port-control auto
dot1x pae authenticator
mab
dot1x timeout tx-period 3
dot1x max-reauth-req 2
authentication periodic
authentication timer reauthenticate server
I can get authentication successfuly but can't download the authorization profile on the gig1/0/1 port since I can see that everything seems fine from the ISE side. the phone is authenticated and authorized fine. so, I debug the dot1x & radius flows from the switch side and get this result.
RADIUS/ENCODE(00000043):Orig. component type = Dot1X
RADIUS(00000043): Config NAS IP: 1.1.1.2
RADIUS(00000043): Config NAS IPv6: ::
RADIUS/ENCODE(00000043): acct_session_id: 57
RADIUS(00000043): sending
RADIUS(00000043): Sending a IPv4 Radius Packet
RADIUS(00000043): Send Access-Request to 1.1.1.1:1812 id 1645/72, len 261
RADIUS: authenticator 82 94 D8 85 E9 E0 CF 71 - 03 FE C5 BA 76 EC 76 C4
RADIUS: User-Name [1] 14 "00152bd20c19"
RADIUS: User-Password [2] 18 *
RADIUS: Service-Type [6] 6 Call Check [10]
RADIUS: Vendor, Cisco [26] 31
RADIUS: Cisco AVpair [1] 25 "service-type=Call Check"
RADIUS: Framed-MTU [12] 6 1500
RADIUS: Called-Station-Id [30] 19 "30-F7-0D-CD-5F-01"
RADIUS: Calling-Station-Id [31] 19 "00-15-2B-D2-0C-19"
RADIUS: Message-Authenticato[80] 18
RADIUS: 90 B9 61 65 CC A6 B2 89 BC C8 3D DC D4 14 03 C5 [ ae=]
RADIUS: EAP-Key-Name [102] 2 *
RADIUS: Vendor, Cisco [26] 49
RADIUS: Cisco AVpair [1] 43 "audit-session-id=C0A8424200000036001B2AAE"
RADIUS: NAS-Port-Type [61] 6 Ethernet [15]
RADIUS: NAS-Port [5] 6 50101
RADIUS: NAS-Port-Id [87] 22 "GigabitEthernet1/0/1"
RADIUS: Called-Station-Id [30] 19 "30-F7-0D-CD-5F-01"
RADIUS: NAS-IP-Address [4] 6 1.1.1.2
RADIUS(00000043): Started 5 sec timeout
RADIUS: Received from id 1645/72 1.1.1.1:1812, Access-Accept, len 297
RADIUS: authenticator D5 2C 29 3B AC C8 A7 2F - A4 75 45 F5 51 6D 4F A8
RADIUS: User-Name [1] 19 "00-15-2B-D2-0C-19"
RADIUS: State [24] 40
RADIUS: 52 65 61 75 74 68 53 65 73 73 69 6F 6E 3A 43 30 [ReauthSession:C0]
RADIUS: 41 38 34 32 34 32 30 30 30 30 30 30 33 36 30 30 [A842420000003600]
RADIUS: 31 42 32 41 41 45 [ 1B2AAE]
RADIUS: Class [25] 50
RADIUS: 43 41 43 53 3A 43 30 41 38 34 32 34 32 30 30 30 [CACS:C0A84242000]
RADIUS: 30 30 30 33 36 30 30 31 42 32 41 41 45 3A 69 73 [00036001B2AAE:is]
RADIUS: 65 33 2F 31 35 30 33 30 36 35 37 38 2F 33 38 36 [ e3/150306578/386]
RADIUS: Termination-Action [29] 6 1
RADIUS: Message-Authenticato[80] 18
RADIUS: 09 17 84 AB 27 8E B4 E0 F4 A6 93 EE 19 2A A6 34 [ '*4]
RADIUS: Vendor, Cisco [26] 34
RADIUS: Cisco AVpair [1] 28 "device-traffic-class=voice"
RADIUS: Vendor, Cisco [26] 75
RADIUS: Cisco AVpair [1] 69 "ACS:CiscoSecure-Defined-ACL=#ACSACL#-IP-PERMIT_ALL_TRAFFIC-4fe7f797"
RADIUS: Vendor, Cisco [26] 35
RADIUS: Cisco AVpair [1] 29 "profile-name=Cisco-IP-Phone"i
RADIUS(00000043): Received from id 1645/72
RADIUS/DECODE: parse unknown cisco vsa "profile-name" - IGNORE
%MAB-5-SUCCESS: Authentication successful for client (0015.2bd2.0c19) on Interface Gi1/0/1 AuditSessionID C0A8424200000036001B2AAE
%AUTHMGR-7-RESULT: Authentication result 'success' from 'mab' for client (0015.2bd2.0c19) on Interface Gi1/0/1 AuditSessionID C0A8424200000036001B2AAE
%DOT1X_SWITCH-5-ERR_VLAN_RSPAN: Attempt to assign RSPAN VLAN 410 to 802.1x port GigabitEthernet1/0/1. 802.1x is incompatible with RSPAN AuditSessionID C0A8424200000036001B2AAE
RADIUS/ENCODE(00000000):Orig. component type = Invalid
so, I notice two things :-
1-" RADIUS/DECODE: parse unknown cisco vsa "profile-name" - IGNORE " on the radius attribute since I beleive that I configure the radius vsa attribute fine as shows
aaa new-model
aaa authentication dot1x default group radius
aaa authorization network default group radius
aaa accounting dot1x default start-stop group radius
aaa accounting system default start-stop group radius
aaa session-id common
aaa accounting update periodic 5
aaa server radius dynamic-author
client 1.1.1.1 server-key 0 cisco
radius-server attribute 8 include-in-access-req
radius-server attribute 25 access-request include
radius-server dead-criteria time 5 tries 3
radius-server host 1.1.1.1 auth-port 1812 acct-port 1813 key cisco
radius-server vsa send accounting
radius-server vsa send authentication
2- "%DOT1X_SWITCH-5-ERR_VLAN_RSPAN:" since I didn't have any configuration related to RSPAN.
so, anybody have any idea to fix this issue.
Regards
BaselIt is not the ACL it is ignoring, it's the profile-name, which it should, because it has nothing to use that for. However, you should look into VLAN 410, to check and see if you have any config relating to that vlan, the only actual error i see in your logs is the one regarding assigning vlan 410. Could you please post you entire switch config, see we can see what else you might have configured.
%DOT1X_SWITCH-5-ERR_VLAN_RSPAN: Attempt to assign RSPAN VLAN 410 to 802.1x port GigabitEthernet1/0/1. 802.1x is incompatible with RSPAN AuditSessionID C0A8424200000036001B2AAE - See more at: https://supportforums.cisco.com/message/3863298#3863298
%DOT1X_SWITCH-5-ERR_VLAN_RSPAN: Attempt to assign RSPAN VLAN 410 to 802.1x port GigabitEthernet1/0/1. 802.1x is incompatible with RSPAN AuditSessionID C0A8424200000036001B2AAE - See more at: https://supportforums.cisco.com/message/3863298#3863298
%DOT1X_SWITCH-5-ERR_VLAN_RSPAN: Attempt to assign RSPAN VLAN 410 to 802.1x port GigabitEthernet1/0/1. 802.1x is incompatible with RSPAN AuditSessionID C0A8424200000036001B2AAE - See more at: https://supportforums.cisco.com/message/3863298#3863298
%DOT1X_SWITCH-5-ERR_VLAN_RSPAN: Attempt to assign RSPAN VLAN 410 to 802.1x port GigabitEthernet1/0/1. 802.1x is incompatible with RSPAN AuditSessionID C0A8424200000036001B2AAE - See more at: https://supportforums.cisco.com/message/3863298#3863298
%DOT1X_SWITCH-5-ERR_VLAN_RSPAN: Attempt to assign RSPAN VLAN 410 to 802.1x port GigabitEthernet1/0/1. 802.1x is incompatible with RSPAN AuditSessionID C0A8424200000036001B2AAE - See more at: https://supportforums.cisco.com/message/3863298#3863298
%DOT1X_SWITCH-5-ERR_VLAN_RSPAN: Attempt to assign RSPAN VLAN 410 to 802.1x port GigabitEthernet1/0/1. 802.1x is incompatible with RSPAN AuditSessionID C0A8424200000036001B2AAE - See more at: https://supportforums.cisco.com/message/3863298#3863298
%DOT1X_SWITCH-5-ERR_VLAN_RSPAN: Attempt to assign RSPAN VLAN 410 to 802.1x port GigabitEthernet1/0/1. 802.1x is incompatible with RSPAN AuditSessionID C0A8424200000036001B2AAE - See more at: https://supportforums.cisco.com/message/3863298#3863298
%DOT1X_SWITCH-5-ERR_VLAN_RSPAN: Attempt to assign RSPAN VLAN 410 to 802.1x port GigabitEthernet1/0/1. 802.1x is incompatible with RSPAN AuditSessionID C0A8424200000036001B2AAE - See more at: https://supportforums.cisco.com/message/3863298#3863298
%DOT1X_SWITCH-5-ERR_VLAN_RSPAN: Attempt to assign RSPAN VLAN 410 to 802.1x port GigabitEthernet1/0/1. 802.1x is incompatible with RSPAN AuditSessionID C0A8424200000036001B2AAE - See more at: https://supportforums.cisco.com/message/3863298#3863298 -
How can one edit a profile name in ACR?
Both Adobe DNG Profile Utility and the PassPort profile software very nicely create and install profiles in ACR. A profile name is given at the time of creation. Once installed in ACR, however, how can one edit the name of the profile?
thanks, grampus45http://forums.adobe.com/message/3158961#3158961
-
Change profile name on support form
Can anyone tell me how do I change my profile name on this support forum?
Hello,
You cannot...once created, it is permanent. To change would require admin access...if really necessary, click the "Report Inappropriate Content" link on the left side of any of your posts and ask for the change you desire.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Netsh wlan show profiles name=[profile name] key=clear batch file
i want to make a bat.file for this command : netsh
wlan show profiles name=[profile name] key=clear.
when i start the bat.file, i want to only write in the network name, and just press enter. and then the network key will show.
can you help me please??
ps, sorry for bad english...i want to make a bat.file for this command : netsh
wlan show profiles name=[profile name] key=clear.
when i start the bat.file, i want to only write in the network name, and just press enter. and then the network key will show.
can you help me please??
ps, sorry for bad english...
i think something like this(can't finish, because don't know how), and i dont ewen know if this command is properly written, please edith and share it. :)
@echo off
:home
title net password
color a
cls
echo.
echo network
echo=============
echo.
echo [1] input ssid
echo [2] exit
echo.
set /p op=
if %op%==1 goto 1
if %op%==2 goto 2
:1
color a
cls
echo network key
echo ================================
echo.
Set /p username=Username:
netsh wlan show profiles name=[username] key=clear -
I have some pictures that don't show a thumbnail in iPhoto. The info dialog for them says the Color Space is "Gray" and the Profile name is "Gr?skala - gamma 2,2". If I double-click on of these the enlarged image seems somewhat faded. The picture looks fine if I just view it directly in Preview, or ColorSync Utility. It seems most pictures have a Color Space of RGB, how to I change the Color Space of these files to RGB?
Justin:
Download the Automator application "Embed sRGB Profile" from Toad's Cellar and unzip it. Then locate the original files for those problem images and drop them on it. Next launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library and select the first three options. This should get those images compatible with iPhoto.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file. -
Please I want my Game Center profile name back I changed it by mistake and when I try to return it it tell me the nickname is already in use!
Restore the device from the most recent backup (prior to restoring as new) to put everything back the way it was.
-
Get ICC Profile name of image in INDD
Hi,
How I can get the Profile name associated to a RGB/CMYK image in InDesign?
The properties profile of image return Embedded instaed of name of ICC profile (Example Adobe RGB (1998)).
From link palette this info is available...
StefanoHi,
I found the solution using the power of Sips:
try
set pathImmagine to "Snow Leopard:Users:stefano:Desktop:roman16_06_yellow.tif"
set profileName to do shell script "sips -g profile " & quoted form of (POSIX path of pathImmagine) & " | fgrep profile | sed 's/ profile: //g'"
on error msg number errnum
set profileName to "ND"
end try
Very fast even with big images.
But like Adobe as added the intelligent new Parent page property, this property must be added in InDesign
Stefano Cappello -
Please let me know on how to get the color profile used in an eps file. In Photoshop scirpting there is method colorProfileName to get the profile name.
I hope this method is not available in Illustrator scripting.
regards,
SashiSashikala Balasubramanian wrote:
Forums are there for posting any queries.
Yes, and it's also a common courtesy to acknowledge help to any query you might have by marking answers as "helpful" or (the very thought) "correct".
First of all, this shows other helpful members of this forum that your question has been answered and thus they can skip reading it if they want.
Second, it shows people who want to know more about the topic your question it has been answered.
Third, it shows to people having the same or a related question this thread may contain further information.
Fourth, by acknowledging an answer as "helpful" or (gods forbid) "correct", you are sending a thank-you to the person who answered.
Fifth, by marking an answer as "helpful" or "correct", the person providing that answer gains a small number of points, which, albeit not of monetary value, still carry a symbolic value as people who have a lot of points are thus people who give correct or helpful answers a lot, and as such their answers may be considered more knowledgeable than those of others.
Sashikala Balasubramanian wrote:
This does not mean that i had not tried.
How could I have known you already tried each and every logical step? You did not tell what you had tried so far in your original post, you just popped the question.
Sashikala Balasubramanian wrote:
If you are willing to reply, do it.
I sure do. Didn't you think my reply was helpful? (Or even "correct", in the sense it's a definitive answer to your original question?)
Sashikala Balasubramanian wrote:
Dont criticize others.
"Criticizing" is not necessarly or implicitly a negative attitude. -
Quick Profile Name system not working as expected
When I open the EMET and I change the value of "Quick Profile Name" from Recommended Security settings to maximum security settings and then restart the application it always changes to "Custom Security Settings" and it also changes
the Data Execution Prevention (DEP) from "Always On" (like it is on maximum security settings mode) to "Application Opt in". How do I get it to stay on the Maximum security setting? Even if I change only the DEP to "Always On"
it always changes back, how come?Hi,
If your environment has multiple database, move the user to different database and check the status.
Also try
run the mailbox repair request for that mailbox, and check.
new-mailboxrepairrequest -mailbox ""mailbox" -
What are advantage and disadvantage of having same role name and profile name .
Alex Ayers wrote:>
> Advantages
>
> consistent naming when reporting (though this is not really a problem in ECCn systems)
I allways point out the disadvantage of that one which is (in my oppinion) that one typo may ruin the system.
Imagine selecting a large set of profiles from the database, based on a list of rolenames. If one of the profilenames is mistyped said profile is not in your selection and that may remain unnoticed in large batches but does influence the outcome of security investigations.....
I'd rather trust the one-to-one database link between roles and profiles (AGR_PROF) rather than a 'fake' link created by a human.
Also limiting yourself from 30 to 12 characters in the role name, as pointed out, is quite a price to pay for creating this visible relation where the technical one already exists. You can call this one of my pet peeves and I'm very unlikely to leave the standpoint that meddling with profile names (as far as PFCG profiles are concerned, not the structural stuff) is a waste of time to say the least.
Edited by: Jurjen Heeck on Feb 20, 2008 1:33 PM
Maybe you are looking for
-
Having an issue adding network to eigrp
I'm doing a class project using a network simulator and am asked to: Design and implement an network for company RoutersCourseMatters. The names of the department names at this company are Faculty, Staff, and Students. For security reasons, each de
-
How do I transfer the contacts from my Nextel/sprint SIM to a 3G iPhone?
I am trying to determine if I will buy the Google phone or the iPhone 3G. I have been using a very powerful, military grade phone from Nextel for over three years. It has GPS voice turn by turn (1st negative for the 3G), the ability to track my son,
-
Font weight has no effect in legend in flex 4
Font weight,Font size has no effect in legend in line chart. Also i have trouble with date time axis.What should i do about it
-
I'm looking for ideas. Up to now I've used Flash 8 to launch swf files and it has worked terrifically for that. Now, however, I have an application where I need to launch pdf files within a flash environment. Can Flash do that? Also, is there a way t
-
The Oracle Host command locks up XP occasionally after returning from LabVIEW app.
Here's the scenario: The Oracle Host command calls a LabVIEW exe I created called LVSMS.exe. LVSMS than calls a Campbell Scientific app called SMS.exe that reads data from a storage device through the serial port COM1. SMS is closed by LabVIEW throug