Profile option is obsolete in R12

Hi
We have recently migrated from 11.5.10.2 to R12.1.3. Before migration, certain users were able to see the output and log files submitted by other users. But now this is not working. They are not able to see the output of requests submitted by others anymore. This profile option is obsolete in R12. Is there any new profile option to replace this.
Regards

user13551818 wrote:
Chk The Profile option Concurrent:Report Access Level_.
Change the Profile Option value for Concurrent:Report Access Level. Default value for the profile is "User", which means View Output is only accessible by the particular user that submitted the request. Set it to "Responsibility", now the View Output button is enabled from responsiblity where the report is registered.This profile option is no longer used in R12 and it is replaced by RBAC -- Please see the doc referenced above for details.
Thanks,
Hussein

Similar Messages

Query or Profile Option to find Current logged in user in oracle apps R12

Query or Profile Option to find Current logged in user in oracle apps R12.
I want to get value of current user who is logged in to that particular session, based on the value of user_id or user_name returned i have to do a Forms Personalization.
Plz help.
Regards,
Sadiya P.

Hi Sadiya,
do you have the answer for this? please send it to me because i am also have same requirement. so plz post it here....

MO Operating Unit Profile Option Needed for Mass Allocation in R12

Mass Allocation does not work in R12 unless you set MO Operating Unit profile option at GL Responsibility level. Is that an official requirement from Oracle or is that a bug? A client should be able to implement and use GL without setting operating units as they are needed for subledgers.

Hi
I have found the below mentioned information on MO: operating Unit Profile option from the Oracle E-Business Suite Multiple Organizations & Oracle General Ledger Reference Guide which directly or indirectly requires the setting of the profile option at the appropriate level (responsibility, site etc)
Profile Options not Owned by General Ledger:
The following profile option affects the operation of General Ledger, but is not "owned" by General Ledger:
• MO: Operating Unit - This profile option controls which operating unit a particular responsibility is assigned to.
Note: General Ledger's Account Inquiry window ignores the setting of this profile option. This allows you to drill down to your subledgers independent from their multiple organization setup. As a result, when you drill down to subledger details, General Ledger will show you all of the transactions that comprise an account balance, regardless of which organization originated the transaction.
To use multiple organizations, you must define an accounting setup with at least one legal entity, a primary ledger that will record the accounting for the legal entity, and an operating unit that is assigned to the primary ledger and a default legal context (legal entity).
You must set either the MO: Operating Unit or MO: Security Profile profile option for each application responsibility to use Multiple Organizations context sensitive applications. When you connect to the Oracle Applications, you sign on by entering your user name and password. Then, you choose a responsibility that is available to your user. After you choose your responsibility, there is an initialization routine that reads the values for all profile options assigned to that responsibility. Oracle Applications allows you to see only the information for those operating units that are assigned to your responsibility.
Hope this helps.
Thanks and Regards
Manish Jain

API for search profile options-R12.

Is there any API for searching profile options? (R12)
Using ibe_customer as the default responsibility.How to filter profile option search using organization , responsibility and different access level?
Edited by: Ep on Aug 29, 2012 11:57 PM
Edited by: Ep on Aug 29, 2012 11:58 PM

hi ,
You can search the table that profiles options are saved,Using the application id in that table ,you have query it....

Profile options at USER level in EBS r12

Hi Gurus
I'm an new to Oracle EBS can some one help with this,
1. Turn on debugging using the following profile options at USER level :
FND: Debug Log Enabled : Yes
FND: Debug Log Level : Statement
2. Run the Create Accounting Program
3. Derive debug message using the following query and upload in excel format :
SELECT substr(module,1,70), MESSAGE_TEXT, timestamp, log_sequence
FROM fnd_log_messages msg, fnd_log_transaction_context tcon
WHERE msg.TRANSACTION_CONTEXT_ID = tcon.TRANSACTION_CONTEXT_ID
AND tcon.TRANSACTION_ID = <’Accounting program ‘ request ID>
ORDER BY LOG_SEQUENCE
4. Upload the LOG and OUTPUT files for the :
- Create Accounting
- Accounting Program
Will be waiting for you reply.
Best Regards
Babu.

Hi Babu,
FND: Debug Log Enabled : Yes
FND: Debug Log Level : Statement
- Navigate to sysadmin responsibility > profile > system
- Find for the respective profiles eg: FND: Debug Log Enabled
- Set your desired value.
2. Run the Create Accounting Program
Run the create accounting conncurrnet program View > Request > New from the respective module
SELECT substr(module,1,70), MESSAGE_TEXT, timestamp, log_sequence
FROM fnd_log_messages msg, fnd_log_transaction_context tcon
WHERE msg.TRANSACTION_CONTEXT_ID = tcon.TRANSACTION_CONTEXT_ID
AND tcon.TRANSACTION_ID = <’Accounting program ‘ request ID>
ORDER BY LOG_SEQUENCE
Run this query from backend, and provide the Concurrent ID of the Create accounting program (replace this at <’Accounting program ‘ request ID>)
- Create Accounting
- Accounting Program
Upload the the logfile and output files of the respective program and the output of the above query.
I believe this is an action plan from the SR, you may also get the assistance from the SR itself and they will help you. Anyways let us know if you need any assistance
Thanks &
Best Regards

New Profile Option in Purchasing R12

I need to know the name of the purchasing profile option that allows a requisition or PO to reference a global contract purchase agreement from any supplier site.
Any help will be highly appreciated.
Pascal

Amy,
Your question is best asked in the Oracle EBS General discussion forum. However, to set the value of a profile variable you would use FND_PROFILE.PUT ('ProfileName','Value');
Hope this helps.
Craig...

Assigning the profile options of Oracle Diagnostic tool of R12

Hi
Could anyone please ellaborate the profile options for RDA (Oracle Diagnostics) like Default timeout used by OSUtility,Sleep time used in OSUtility,Time out used by OSUtility and Time out used by OSUtility to get environment details.
If possible please sugest the way to assign the values for these profiles.
Akshaya

Hi,
Create a profile under Application Developer Responsibility as follow:
Name OAE_LAUNCHER
Application <whatever>
User Profile Name Oracle Application Express Launcher
Description Oracle Application Express Launcher
2. Set above profile value under System Administrator Responsibility -> Profile -> System, and search for the ‘OAE_LAUNCHER’.
Set the value at Site Level as:
http://<hostname>:<Apex port>/pls/apex
Then instead of hardcoding the URL in the jsp, just give the profile name OAE_LAUNCHER that you have just created in the jsp.
Hope this helps you
Brgds,
Mini
If this is helpful or correct, assign points promptly.

Setting 'MO: Security Profile or MO: Operating Unit profile option' - Urgen

All,
Version: 12.0.4
Module: Purchasing
I'm trying to invoke the PO_CHANGE_API1_S.record_acceptance to send the Advance shipment Notice doc to Oracle R12. On invocation I'm getting the following error
ORA-20001: APP-FND-02902: Multi-Org profile option is required+
set either MO: Security Profile or MO: Operating Unit profile option+
1. How do I set this profile option?
2. Is it required to set both security and OU profile option?
3. At what level(site,appln,resp,user,ou,...) should I set the profile?
Please help me.
Thanks,
Sen

Hi,
You can set those profile options from System Administrator responsibility > Profile > System.
Please see these docs for details.
Note: 602141.1 - R12 - Error ORA-20001, APP-FND-02902 Accessing Profile Classes Form With Multi-Org Access Control (MOAC) Enabled
Note: 338332.1 - App-Fnd:02902: Multi-Org Profile Option Is Required. Ora-20001
Note: 393560.1 - How To Prevent the Profile Option MO: Operating Unit being set to NULL at Site Level?
Regards,
Hussein

Setup PO Communication Profile Options

Hi All,
How to setup the "To Domain" and "To Identity" of a supplier like Staples ?
I can see only two profile options available in eBuisiness suite R12 for cXML Communication.
1) PO: cXML From Domain
2) PO: cXML From Identity
My requirement is to setup the following in my outbound cXML being sent to Supplier.
<To>
      <Credential domain="to_domain_default">
        <Identity>to_identity_default</Identity>
      </Credential>
    </To>
@P

Hi All,
Can anybody help by looking at the following cXML file generated while sending to the supplier using outbound message
<?xml version="1.0" encoding="ISO-8859-1" standalone='no'?> <!DOCTYPE cXML SYSTEM "cXML.dtd">
 <cXML version="1.2.007" payloadID="2014-01-21-14-01-58.4167103:0:0.228626802317689347705083245541373929554@" timestamp="2014-01-21T02:01:58+00:00" xml:lang="en">
<Header>
     <From>
          <Credential domain="DUNS">
               <Identity>12345678</Identity> /* Some number generated is replaced with 12345678 for example */
          </Credential>
     </From>
     <To>
          <Credential domain="to_domain_default">
               <Identity>to_identity_default</Identity>
          </Credential>
     </To>
<Sender>
     <Credential domain="DUNS">
          <Identity>258963148</Identity>
               <SharedSecret>XXXXXXXXXXXXXXXXX</SharedSecret> /* Replaced Text generated with XXXXXXX as it is shared secret */
     </Credential>
<UserAgent>Oracle E-Business Suite Oracle Purchasing 11.5.9</UserAgent>
</Sender>
</Header>
<Request deploymentMode="production">
     <OrderRequest> OrderRequestHeader orderID="4167103:0:0" orderDate="2014-01-21T01:57:45+00:00" orderType="regular" type="new">
I need to configure the following part in Oracle E-Business Suite
<To>
          <Credential domain="to_domain_default">
               <Identity>to_identity_default</Identity>
          </Credential>
</To>
As From Group is configured from 2 Profile Options mentioned on above threads
1) PO: cXML From Domain
2) PO: cXML From Identity
<From>
          <Credential domain="DUNS">
               <Identity>12345678</Identity> /* Some number generated is replaced with 12345678 for example */
          </Credential>
</From>
How to do for the "To" Group Configuration in Oracle XML Gateway in Oracle ebusiness suite ?
Thanks in advance and help is greatly appreciated.
@P

System Profile Option: Applications Global Idle Time

Hi to All,
I have been searching for more information about System Profile Option: "Applications Global Idle Time" in ML and Web but havent come across any documentation on this.
Does anyone have incite on this profile and the default parameter.
Thanks

Srini Chavali wrote:
Pl check the ROW WHO information in FND_PROFILE_OPTIONS table for this profile - most likely this is a custom profile created at your site.
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=FND_PROFILE_OPTIONS&c_owner=APPLSYS&c_type=TABLE
HTH
SriniThis profile option exists in 11i and R12, it is a seeded one and not a custom one as you mentioned above.
It is even mentioned in (R12.0.6+ : Oracle Application Object Library Profile Options Data Collection Test [ID 471675.1]).
Thanks,
Hussen

Language specific profile options.

Hi Gurus,
In our EBS R12.1.2, we have 4 NLS Languages, For all these languages I want to have default NLS_DATE_LANGUAGE=AMERICAN. Is there any profile option or environment variable which I can define to make it happen.
Thanks for reviewing,
-Samar-

For English == NLS_LANG=AMERICAN_AMERICA&NLS_DATE_FORMAT=DD-MON-RRRR&NLS_NUMERIC_CHARACTERS=.%2C&NLS_DATE_LANGUAGE=AMERICAN&NLS_SORT=BINARY&&VIEWER=&
For Spanish == NLS_LANG=SPANISH_AMERICA&NLS_DATE_FORMAT=DD-MON-RRRR&NLS_NUMERIC_CHARACTERS=.%2C&NLS_DATE_LANGUAGE=SPANISH&NLS_SORT=BINARY&&VIEWER=&
Once users are loggin into the spanish perefrences, if they enter any date for any form/report, the are getting error on wrong date format, If I modify the URL , every things working == NLS_LANG=SPANISH_AMERICA&NLS_DATE_FORMAT=DD-MON-RRRR&NLS_NUMERIC_CHARACTERS=.%2C&*NLS_DATE_LANGUAGE=AMERICAN*&NLS_SORT=BINARY&&VIEWER=&

Profile option

Hi Everyone,
Versions :
Database :11.0.1.7
Applications : R12.1.3
I want to change the below profile option at the User level(shankar) in the backend applications. Please help me.
Fnd: Debug log enabled to NO from YES
Fnd: Debug log level to Statement
Fnd: Debug log module to %
Thanks,
shubha

Hi;
Please review:
Reg:apps profile
How to list E-Business Suite Profile Option values for all levels using SQLPlus [ID 201945.1]
How to Search all of the Profile Options for a Specific Value [ID 282382.1]
How To Find All Users With A Particular Profile Option Set? [ID 367926.1}
How to Change Profile Option Value Without Forms? [ID 943710.1]
profile options
Regard
Helios

FSG:EXPAND PARENT VALUE PROFILE OPTION 에 대한 설명

제품 : FIN_GL
작성날짜 : 2004-10-14
FSG:EXPAND PARENT VALUE PROFILE OPTION 에 대한 설명
==============================================
PURPOSE
FSG 작성 시 'FSG: Expand Parent Value' profile 의 역할에 대해 설명한다.
Explanation
FSG:Expand Parent Value profile 은 FSG report 작성시 parent value 를 child ranges 로 부터 sum하여 가져 올 것이냐 아니면 parent vlaue 에서 가져 올 것이냐를 결정한다.
Example
Example 1
FSG:Expand Parent Value = Yes
Summary Flag = Yes
Parent Value belongs to a Rollup Group
Result:
FSG looks for summary accounts that have this parent value for this segment.
It does not expand the parent value into its child ranges.
Example 2
FSG:Expand Parent Value = Yes
Summary Flag = Yes
Parent Value does not belong to a Rollup Group
Result:
FSG expands the parent value into its child ranges, then looks for
summary accounts that have values for this segment that are within
these child ranges. (The summary template associated with this summary
account would have to have a 'D' for this segment.)
Example 3
FSG:Expand Parent Value = Yes
Summary Flag = No
Parent Value belongs to a Rollup Group
Result:
FSG looks for detail accounts that have this parent value for this
segment. It does not expand the parent value into its child ranges.
It is never going to be successful.
Example 4
FSG:Expand Parent Value = Yes
Summary Flag = No
Parent Value does not belong to a Rollup Group
Result:
FSG expands the parent value into its child ranges, then looks for detail
accounts that have values for this segment that are within these child
ranges.
Example 5
FSG:Expand Parent Value = No
Summary Flag = Yes
Result:
FSG looks for summary accounts that have this parent value for this
segment. It does not expand the parent value into its child ranges.
Example 6
FSG:Expand Parent Value = No
Summary Flag = No
Result:
FSG expands the parent value into its child ranges, then looks for
detail accounts that have values for this segment that are within
these child ranges.
Reference Documents
Note 1012620.102

I have followed the following notes but it didn't help me
R12: FSG: PERF0005 Error Detected In GET_DEF_LDGS - ORA-01403: No Data Found Common Issues [ID 1368691.1]
Generating a FSG Report Application Does Not Find Profile Values for RG_LOGFILE_DETAIL_LEVEL and EXPAND_PARENT_VALUE [ID 165339.1]
does anyone know how to solved the problem ??If none of the docs help, please log a SR.
Thanks,
Hussein

Can not read values for profile option proxy_user_id in routine& Routine

Hi all ,
I developed a new form in oracle apps R12 and deployed in respective top ,After entering all the details when i am going to save the data i am getting the message like
Can not read values for profile option proxy_user_id in routine& Routine and no action is taking place .
Can some one please help me how to avoid this issue.
Thanks in advance,
Srinivas

Hi Srinivas,
Please check below Metalink notes. Although it is not same as your issue but it will give you way to enable 'VISIBLE' flag(if not done already)
_'Cannot Read Value For Profile Option Proxy_user_id' Error While Trying To Create an AR Invoice [ID 1280915.1_
Thanks,
JD

Unable to Enable profile option

Hi All,
We are facing some issue related to profile options in R2. We are unable to set the value "yes" to the profile option "WIP: MES for Discrete Manufacturing Install".
please any one of u help me on this.......
Thanks in advance.

skjb wrote:
Hi Hussein,
We are unable to set the profile option to "yes", cause only one option is displayed there,that is "no".
We have two R12 Instance, in First instance the two options "yes" and "no" are displayed for this profile option, but not in second instance[here we have only one option "no"].
Thanks
KhadarDid you complete the setup as per the manual? -- http://docs.oracle.com/cd/B53825_08/current/html/docset.html
What is the difference between the two instances?
Thanks,
Hussein

Profile option is obsolete in R12

Similar Messages

Maybe you are looking for