Profile Parameter changes after RAM Upgrade?

Hi,
We are using SAP ECC 6.0 on AIX 5.3 and IBM p595 seriers
Now we have upgrade the Physical memory (RAM) from 8 GB to 16 GB.
After Upgrading/Degrading the Physical memory (RAM) from the Server,What manual Changes has to be done for Profile parameter.Please provide the details.
Cheers
Deepu

Hi ,
After Changing the RAM in SAP System ..
1) Increase the No of Work Processes , If Required
2) Increase the size of Memory Areas ( Size of Extended Memory) , If you face any Memory Dumps
3) Increase the SAP Buffer Sizes ( Program Buffer etc.) to have better performance.
But it is not compulsary that you should change these parameters but changing these Paramters Values will improve performance of SYstem
Thanks
Deepak Gosain

Similar Messages

  • Anyconnect Client profile files deleted after client upgrade

    L.S.
    I am running anyconnect version 3.1.02040 on a Windows 7 64-bit machine with UAC turned on.
    The ASA I am connecting to is a 5510 running ASA OS 8.4.5
    The problem I have is the following:
    We are using machine certificate authentication combined with RADIUS user authentication.
    The machine certificates are stored in the Machine/Personal container in the local machine.
    By default, the anyconnect client does not have the rights to access this certificate store when run by the user in non-elevated mode.
    We do not want to have the user run the client as administrator (in elevated mode) all the time.
    Therefor we have made an Anyconnect Client profile that sets the Certificate Store Override parameter to true and attached it to the group policy.
    With this XML in place (in the C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\Profile folder)
    the users can connect to the ASA and authenticate using the certificate without the need for elevated rights. This is all working perfectly.
    The anyconnect client and XML file are distributed to the clients using a software distribution system (Microsoft SCCM).
    The problem happens when I update the Anyconnect package on the ASA. I recently updated the package to release 3.1.03103. This is what happens:
    The user can connect using the 3.1.02040 client (certicate authentication works without elevation, since the XML Anyconnect Client Profile is present)
    The Anyconnect software updates itself to the new version during the connection, pushed from the ASA.
    The VPN is established.
    However, the XML file that is associated with the group policy is deleted during the upgrade process and not placed back in the Profile folder on the client after the upgrade.
    This means the user cannot connect without using elevated rights the next time he wants to connect.
    If he uses elevated rights after the upgrade, the XML is pushed back from the ASA normally, allowing the user to connect without elevation again any subsequent times.
    Is there any way to push the XML profile to the client from the ASA after the upgrade of the Anyconnect software?

    Hi poiu720408 ,
    1.  You need to set up a web-url or group-alias under the group policy as web have enable the "tunnel-group-list enable" under the webvpn configuration.  So once the user connect to the proper URL/alias the profile will be applied. 
    http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/98580-enable-group-dropdown.html
    2. Yes the Anycopnnect store a "Cache " information on the PC , if you want to clan up you have to go to the anyconnect folder on C: on the PC and delete the global_preferences.xml profile.
    3. This behavior is totally expected and they should disappear  after a some minutes , however if you wan to force this , you can use the command "vpn-sessionsdb logoff webvpn noconfirm"
    Please rate helpful post !
    Hope this helps
    - Randy -

  • Display problem after RAM Upgrade to MS6712

    Hi there,
    after a RAM upgrade (512mb to 3GB) my PC has developed a display problem. The graphics are slow / rippled and video playback is very poor. In device manager no "display adapters" are present and there is also an error mesage referring to the VIA CPU to AGP2/AGP3.0 controller not having enough free resources to run due to a conflisct with VGAsave? I've downloaded the latest VIA chipset drivers to no effect?
    System info: MS6712 MB, AMD Athlon 1.25GHZ, XP SP3.0

    OK, here's the info on my PSU;
    It's a Powerman FSP250-60GTU(PF). Input: 230V - 5A, 50Hz. Max Output: 250W
    While I had the case open I took out 2 of the RAM modules and without making any other changes everything appeared to work fine with just the 1GB, so I tried putting 1 more back in to take it to 2GB and again all seems fine? Does this indeed point to my PSU then? If so and it works fine with 2GB should I be thankfull for a 512mb to 2GB upgrade and send the 3rd module back to Crucial??
    Before I posted this thread I did run a memtest from Memtest86+ with all three modules installed and it came up with NO problems?
    Re Henry's post, I searched using the format of the part no on the RAM modules themselves i.e. M368L2923FLN-CB3 and it took me here:
    http://www.samsung.com/global/business/semiconductor/productListNonflexTable.do?fmly_id=118&sht_id=1
    Other info on printed the modules themselves: 1GB DDR PC2700 CL2.5
    According to Everest my CPU temp (with 2GB installed) is: 43 degrees (MOBO 30 degrees and HD 42 degrees) - do these seem normal?

  • Battery drains while sleeping after RAM upgrade

    Installed 16 GB of RAM and a Hybrid/SSD 1 TB internal HD on MacBook Pro 15" mid 2012 and now the battery drains while the computer is in sleep mode, about 1-3 % per hour. Before the RAM upgrade (stock 4 GB of RAM) there was no noticeable battery drain, so I assume it has to do with the upgrade. I read that it takes more power to maintain 16 GB of RAM during sleep, so my questions are as follows:
    Is 1-3% per hour normal?
    Will resetting the SMC help the issue?
    Does the Hybrid HD have anything to do with this?
    I am not too happy about the battery drain as it happens that I don't use my laptop for some time and prior to the upgrade the loss of battery charge was not an issue at all. Is this the price I have to pay for maxing out my RAM or is there a way (resets, settings, etc) to reduce the amount of battery loss
    Thanks for your input.

    Hi everybody. I have the same question. I have a macbook unibody late 2008. I have recently upgraded the OS to Yosemite. In order to have a smoother functioning of the system I have immediately replaced my original 2Gb (1+1) RAM with 8 Gb (4+4). Since then, I have noticed a dramatic reduction of my battery charge during sleep mode. Now after 8 hours of sleep it goes from 100% to around 65% (before it was 95%). Is it a natural consequence of having installed a larger RAM or there could be anything wrong with my settings?
    I have read a couple of articles about standby mode and standbydelay setting but this does not apply to my model of macbook.
    Here is my pmset -g result:
    Active Profiles:
    Battery Power        -1*
    AC Power        -1
    Currently in use:
    hibernatemode        3
    acwake               0
    lidwake              1
    halfdim              1
    sleep                20 (sleep prevented by AddressBookSour)
    ttyskeepawake        1
    sms                  1
    hibernatefile        /var/vm/sleepimage
    disksleep            10
    displaysleep         2
    Thanks a lot for any comment / suggestion /hint.
    Bye

  • MacBook not booting after RAM upgrade

    I'm sorry if the case has been already posted.
    Yesterday I took my MacBook Alu unibody late 2008 to a RAM upgrade (from 2 to 4gigs) to an offical Mac Reseller. They installed it and showed me that the system loads properly and recognized the new RAM.
    I took it home, started working on After Effects and Photoshop and when i wanted to check a video on Quicktime, this program refused to boot.
    Then photoshop freeze and after effects did so. I quited all aplications and restarted. On restart after the 'bong' i've got the grey screen white an apple logo and a loading bar underneath, that was it, it never finished loading but shutting down.
    After the 2nd try the computer gave me the BAD RAM alarm signal right before the start button was pressed and nothing more. I just managed to start it ONCE on safe mode, but this one also freezed and colapsed.
    Today i didn't get the BAD ram alarm but the grey screen and loading bar after shutting down.
    I took it back to the reseler, the shop boss who did the upgrade wasn't there , the guys on the morning shift placed the old RAM back resulting the same. So they told me it's a software problem, not hardware and might be caused by a failed firmware update or something i did wrong and since i was showed that the system booted after the upgrade i can't complain or argue that they did somethiing wrong.
    So basically the want 80euros to check what's wrong with my computer plus the 120 i already payed them for a RAM that doesn't work and of course the repair cost of the computer.
    On monday i'll go to talk to the boss, what do you guys recomend me to tell him? i'm frustrated that the guys there treat me like if i broke my computer for beeing stupid and wanted to get it fixed for free, when it clearly broke after they did something wrong on it!
    please advice me!
    thanks!
    Message was edited by: finn bell

    What brand is the RAM? From what you said, it is obvious that the RAM is at fault. I would simply tell them that it is not compatible and return the RAM.
    Check the System Profiler to see what it says about the RAM (Apple Logo - About this Mac - More Info) and run this application to test the RAM:
    http://www.memtestosx.org/joomla/index.php
    If either shows any errors, print out the results and take them with you to the store.

  • OT: Dreamweaver quits after ram upgrade

    Anyone had this senario before. I upgraded ram from 1gb to
    2gb and now
    MX04 just keeps quiting on start up, lol.
    I haven't done a complete reinstall of the software yet but
    any ideas
    why this should be happening?
    All other software, Photoshop, Illustrator, Quark, InDesign
    appear at
    the moment to be uneffected.
    Iz a weird, weird world.
    Humm I was intending to upgrade to CS4 but I'm awaiting the
    trial
    version first.
    Oh well I guess I go back to other computer for the moment.

    Hi Alan I have the issue with MX04 so I don't think below
    applies,
    according to this line:
    'The crashes do not occur in Dreamweaver 8 or earlier (Ref.
    229536).'
    Problem just started after I upgraded the ram from 1gb to
    2gb, which
    seems odd, but hey I expect anything these days. Some file
    within DW I
    think may have been affected by the time/date because on
    reboot I had a
    warning that the computers clock/date was set to March 2001
    and may
    interfere with some software, even weirder as I only
    purchased the
    computer last year, so why the clock should go back to 2001 I
    don't know.
    I'll try a complete reinstall and see if that clears it up,
    overwrite
    the corrupt file hopefully. It doesn't matter much to be
    honest I was on
    the verge of upgrading so I can live with it for now.
    Thanks for your input.
    Alan wrote:
    > Technote:
    >
    http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402776
    >
    > quote from technote/
    >
    >
    > TechNote
    >
    > Dreamweaver CS3 crashes after Daylight Savings Time ends
    >
    > Issue
    >
    >
    > Adobe Dreamweaver CS3 crashes when working with certain
    PHP or ASP files in
    > Code view or Design view after the clock goes back one
    hour, when Daylight
    > Savings Time ends. The crashes only occur when selecting
    certain lines in
    > Code view, or selecting certain objects in Design view.
    The crashes only
    > occur in files that have PHP or ASP code, intermingled
    with HTML code. The
    > crashes do not occur in Dreamweaver 8 or earlier (Ref.
    229536).
    >
    >
    > Reason
    >
    >
    > The Dreamweaver CS3 WinFileCache-AD76BB20.dat file has
    been corrupted by the
    > time change.
    >
    >
    > Solution
    >
    >
    > 1. If Dreamweaver is open, quit the application.
    > 2. Delete the WinFileCache-AD76BB20.dat file from the
    Dreamweaver user
    > configuration folder. Note that on Windows, the
    Application Data and AppData
    > folders are hidden by default, so verify that your
    Windows Explorer folder
    > options are set to View Hidden Folders. The location of
    this file is as
    > follows:
    > * Dreamweaver CS3 on Windows Vista:
    > C:\Users\[username]\AppData\Roaming\Adobe\Dreamweaver
    9\Configuration
    > * Dreamweaver CS3 on Windows XP:
    > C:\Documents and Settings\[username]\Application
    Data\Adobe\Dreamweaver
    > 9\Configuration
    > 3. Restart Dreamweaver.
    >
    >
    > Keywords
    >
    > Code/Design view, Daylight Savings Time, Dreamweaver,
    crashes
    >
    > TechNote Details
    > Last Update: 11-05-2007
    > ID: kb402776
    > OS:
    > * Windows XP, Windows Vista
    > Permanent Link:
    http://www.adobe.com/go/kb402776
    >
    > /q
    >
    >

  • KT3v MS6712 System Won't power up after RAM upgrade

    hello this is my first posting to this forum and I hope someone might be able to help on this as I am totally stumped.  I have been running my KT3V MS6712 mobo with 256MB since it was built. The manual for this mobo says it can handle up to 3GB RAM in any order or size. I have 3 DIMM slots and thought it would be more cost effective to just
    purchase 1 DIMM leaving the other 2 slots free.  So I decided to  upgrade to 1GB and I bought a Kingston 1Gb PC2100 266MHz DIMM and installed it on my system.  Now my system won't power on at all. When I press the power button on the PC, the CPU fan spins for like 1-2 seconds then stops.  The system appears to be completely dead.  Cos I thought the problem was down to the new RAM installation I thought better put my old 256 DIMM back, however I still get the same problem. I have tried swopping both DIMMS into different slots but still doesn't work. The system was working fine until I did the RAM upgrade. I tried resetting the CMOS by moving the jumpers around in case it was a BIOS issue, still hasn't made a difference. Dunno if its the PSU which has suddenly gone, however seems strange. There are no beeps from the system or lights flashing to indicate anything.  I don't have
    the D-Bracket installed either. I have also never upgraded the BIOS on this system as it has always been stable. The CPU is not overclocked. Has anyone had this problem before after a RAM upgrade?  Hope I have given you enough information 

    Suntek is perhaps not the best of PSU makers, but a sudden collapse is not so common. You normally notice problems earlier.
    I took a big beating last time I said this , but it is important that there is no power in the system when changing memory sticks.
    It sounds a bit like the processor went away for holiday. Have you any data on the processor temperature? Is there any activity at all? Does the processor heat sink get warm?

  • Firefox will not open and my profile name changes, after I creat a new profile it works until I try to open again

    Firefox version 16.0.2 was working I have used FF for years. A few days ago it started to run very slow opening web sites. Then this morning when I tried to open it I saw a progress bar that looked like the kind I see after an update has been applied but FF never opened.
    I rebooted my windows 7 64 bit and tried again, nothing FF would not open and I got no error message.
    So I opened the profile manager and only found a default profile not the one I created last year with my name. I created a new profile and browsed to my old profile folder. FF opened and ran fine until I closed it and later tried to open it again then I kept getting an error box telling me that FF had crashed and asked if I wanted to send a report and restart, I did but no good it still would not open.
    I ran the profile manager again and found my profile had changed name to a bunch of numbers. I delete that profile but kept the folder then made a new one and that worked. I shut it down again and once again I get the We're sorry error box.
    By the way I had set the profile manager to open when FF loads and it is not opening so the problem is before it gets to that command.

    First I already have my view set to show everything so that is not the problem.
    But I just tried opening "Computer" from the start button then type in profiles.ini in the address bar and hit enter. The profile manager opened with my profile listed. I selected it and hit start firefox and it opened as it should.
    I closed it again and tried to open it from the shortcut in my task bar and I got the Sorry window.
    But then I tried to open it from the short cut you get when you press the start button and program list and it work!
    I went back to my desk top and tried the short cut on the desk top and it worked.
    So I deleted the short cut on the task bar and created a new one and it worked.
    I rebooted the computer and tried again and the task bar shortcut works and has the right profile.
    So it seems that the problem is that the short cut was corrupted and was causing the error that caused the program to fail to open.
    I had no idea a shortcut could do that. In the past I have had short cut stop working but never do what this one did.
    I still have no idea where the profiles.ini is.

  • Video will not play on Canvas or NTSC after RAM upgrade

    editing on a G5 v. 10.4.11, Dual 1.8 Ghz G5 with a recent upgrade to 4GB of ram. Have an AJA IO LA
    After the RAM upgrade, FCP timeline will play but video is black in the canvas and image is frozen on the NTSC. Video WILL play in Viewer but no audio.
    All cables have been checked to make sure they were put back correctly - will keep checking for errors in re-cabling computer.
    Have tried refreshing displays and other tests with displays. Any info would be greatly appreciated.
    Thanks!

    pull the ram, problem goes away? - bad ram
    you can pull 2 sticks at a time to isolate which chip it is.
    did you get it from a good source - Crucial.com is my favorite, OWC is popular too - both have lifetime warranty

  • Process Chain behavior changed after SP upgrade

    Hi all, we've recently updated SP from SAP_BW 700, SAPKW70016 to SAPKW70021.
    We realized about a particular process chain behavior:
    We have many process chains configured to execute the next step "Always" (whatever it happens with the previous process).
    This is the situation which changed:
    BEFORE the upgrade:
    If error raises on a process, this one remains "red" but the subsequent processes continues.
    Once repaired (repeat/repair from the PC) the "crashed" process it is updated to "Green" status.
    AFTER the upgrade:
    If error raises on a process, this one remains "red" but the subsequent processes continues.
    Once repaired (repeat/repair from the PC) the "crashed" process it is updated to "Green" status.
    The remaining processes are executed once again (a new branch is generated). <- This is different
    I want the "BEFORE the upgrade" behavior to keep working as always.
    Do you know if there's some OSS note or tips of configs available to set this as my needs? (we have found the OSS Note 1398868 and implemented it, but the "effect" is not as we should expect for this case in particular).
    I hope you can help. Thanks in advance and best regards,
    Bernardo

    I've found the OSS note: Note 1473491 - Chain not continued with termination and "ALWAYS" link; delivered with "SAPKW70025" corrections. It seems to be solving the issue I've originally mentioned. I'll perform some tests on this and update.
    Regards,
    Bernardo

  • History of Profile Parameter Changes!!!

    Hi,
    Please help with any way by which i can find the parameter changes in profile.I referred to other post and found TU02 tcode but this does not help.
    Basically we are trying find from particular to till now the list of parameter changes happened.
    satish

    Hi,
    Go to RZ10
    Choose the profile.
    Go to Extended maintenance
    Choose - Display.
    Then Select Go TO - Detailed List
    Again Click  Go to- Detailed List
    You can see the history of the parameter change.
    Regards
    Edited by: bhuban_2010 on Aug 5, 2011 5:35 AM

  • Excel layout changed after EHP5 upgrade from EHP4.

    Hi All,
    We have just finished the EHP5 upgrade from EHP4 for ECC 6.0 for our production system. BUT we noticed that The standard layout, (also known as Dynamic List Display) has been chagned in EHP5 compare to EHP4.
    This is affected us as we have lot of macros enable for the excel files.
    Request you all to help. Is there any sapnote, anyway we can resolved this issue.
    Thanks

    Hi Markus,
    Thanks for reply.
    I not sure how i can attached file over here? Is there anyway to attached files in the forum?. I have the before and after image of excel file.
    But the position of the data which is downloaed in the excel sheet has been changed after upgrade. For example ,Before upgrade the column named "Description" in the production plan report was in the second column i.e. B where as after upgrade the "Description" column in the production plan report is in the first column i.e. A.
    I mean the postion of the data changed in after upgrade. Therefore macro which are enable are not working anymore.
    New Format Example
    Production plan          
    Description                        Material                               Sales doc.
    IRB 2600 M2004                 3HAC020536-018              104861
    IRB 2600 M2004                 3HAC020536-018              2BT0615486
    OLD Format
    Production plan                    
                                          Description                    Material                               Sales doc.
                                          IRB 2600 M2004            3HAC020536-018               104861
                                          IRB 2600 M2004            3HAC020536-018               2BT0615486
    Hope this above will help to make it clear.
    After checking this message ... the output example given above seems to be not showing the way i itend to... But in above example in the old format the Description column was at column B instead of column A after upgrade.
    Thanks
    Edited by: deepak.shinde on Oct 11, 2011 8:34 AM
    Edited by: deepak.shinde on Oct 11, 2011 8:36 AM

  • How do I Change the Name of My MacBook and Why was it Changed after the Upgrade to Yosemite?

    Hi everyone,
    I upgraded my MacBook Air (2012) to Yosemite a few months back and it changed the name of my Mac from "Alan's MacBook" to "Alan MacBook Air (2)." I simply want to know how to change it back to the original name. Also, why was it changed in the first place after my upgrade to Yosemite?
    Thank you so much!!!
    Alan

    Professor AR wrote:
    Also, why was it changed in the first place after my upgrade to Yosemite?
    This was a common bug in Yosemite. Follow dwb's instructions but also restart your router. Make sure you're running OS X 10.10.2 since it was supposed to have been addressed with that update.
    I have heard allegations regarding simultaneous use of both Wi-Fi and Ethernet (or equivalent adapter, considering it's a MBA) but can find no justification for them, and I never personally observed any correlation to it. It's perfectly acceptable to use both.

  • Mac mini won't boot after RAM upgrade.

    Tried installing new RAM in my Mac Mini, 512MB stock to 2GB of Crucial. Followed the directions to a T, grounded myself the whole time.
    Things I've tried so far:
    1. Resetting the PRAM, no luck.
    2. Holding option at start-up, shows no icon.
    3. Holding shift, no luck.
    4. Holding X, nothing.
    How do I get it to accept a CD if it won't boot?

    Welcome to Apple Discussions!
    You clearly have a problem, but you don't describe exactly what that is other than that your mini won't boot after the upgrade. What happens when it starts up? Does it attempt to start and hang up on the grey or blue screens, or does it start beeping at you almost immediately after you try and start it up, and also flash the power light?
    If the former, then you may have dislodged a connector while working inside the system, in which case opening it up and checking that everything is firmly connected would be the first thing to do. If the latter, then the beeping/light flashing is the system telling you it has failed the power-on self test and the pattern of beeps/lights indicates why. In your case likely the system can't find workable memory. In that instance, opening the system and ensuring that the RAM is firmly and fully seated would be a good step, and if the mini continues to fail, then replacing the new RAM with the original to test that the system will then start.
    It is not likely that anything had damaged your MacOS install in the process of upgrading, thus normally no reason to need to boot to CD as a result of a RAM issue.

  • Macbook Pro is Not Booting After RAM Upgrade

    Hi,
    I just upgraded the RAM in my MacBook Pro running Mountain Lion from 4gb to 8gb (Using the memory that the guy at Fry's recommended). It has been stuck on the Apple logo for about 20 minutes after the upgrade, even after I made sure that the RAM was seated properly. Is it normal for it to take this long to boot after a RAM upgrade?

    I installed 8gb (2 X4gb) and it has a maximum of 8gb. I have determined that it was just bad RAM, so I will return it as soon as I can.
    Thanks.

Maybe you are looking for