Profile parameter error

While changing the SAP parameter & try to save the changes it shows an error Cannot generate back file ( )
Please help !

Hi,
It would be critical, if you are not able to understand Joe's reply.
He already told 2 scenarios:1) File permissions issue, just check the file permisssions of your kernel directory
It should have accessed by SIDADM (for profiles directory in this situation)
2) Already there are one old file lying at OS level, unable to overwrite.....in this situation check whether there is any old file and rename/delete that old file and start your activity
This is pretty, if you understood in right way....Good luck!
Regards
Nick Loy

Similar Messages

Profile Parameter : Time out for executing query on the web

Hi gurus,
I am executing queries on the web directly. This can be done from query designer with the button that says "Execute query on web". The problem is that for queries that take more than 600 Secs to run, I get an Application timed out error. Queries that take less than this run smoothly.
Can anyone please tell me the profile parameter associated with this particular setting. It is not rdisp/max_wprun_time, I know for sure since the value for this profile parameter in my system is 9999. Please help.
Thanks & rgds,
Sree

Issue resolved.
Profile Paramter - icm/server_port_0
Current Value - PROT=HTTP,PORT=8000,TIMEOUT=60,PROCTIMEOUT=600
Changed to - PROT=HTTP,PORT=8000,TIMEOUT=60,PROCTIMEOUT=3600
rgds,
Sree

Profile parameter icm/host_name_full is not set correctly

Hi All,
I am working on Solution Manager 4.0. When I execute TCODE "SOLUTION_MANAGER", it gives the following error:
Profile parameter icm/host_name_full is not set correctly (see long text)
When I click on "Long Text", it gives me the following message widow:
Message Number: SOL_GRAPHIC002
Diagnosis
The graphic cannot be displayed, since the profile parameter icm/host_name_full is not set correctly.
Procedure
Set the profile parameter icm/host_name_full correctly.
For more information, see SAP Notes 434918 and 677118.
I have referred to both the notes above. In note# 434918, it says that I need latest kernel patch (which is 150).Also the icm/host_name_full parameter parameter was not there in Solution Manager, so I created in the following manner:
Parameter Name =icm/host_name_full
Parameter Value=smgdcs1s.example.com
But however, the error continues to be the same.
Kindly help me asap.
Thanks in advance.
Regards,
Faisal

Hi Markus,
Earlier the profile was activated and server was also restarted. However, it was not efffective.
Now once again i have activated the profile and restared the server. Now I am able to see the profile and it value in
RZ10
RZ11
Thanks a alot for your valuable inputs
Thanks and Regards,
Faisal

Setting profile parameter icm/HTTP/error_templ_path

Hi, I have a SAP Enterprsie Portal installation with only java stack (no abap stack),
i want to set a profile parameter icm/HTTP/error_templ_path,
please direct me how to set this parameter,
also, i need this parameter to be applicable for the SAP web dispatcher, i mean it should be effective for all java instances (i have 2 java instances),
please help,.......................as there is no ABAP stack, i dont know where to set this parameter

That parameter you mentioned describes of where the error templates can be found
You can generate your own static or dynamic error pages for the ICM
which are sent to the client if an error occurs. Use this parameter
to specify the directory in which the ICM can find the pages.
If this parameter is not set, the ICM returns its own static error
page.
For information about how to generate the error pages, see the
documentation in the SAP Library or using the Help Portal.
SAP Web Application Server -> Client/Server Technology ->
Architecture of the SAP Web Application Server -> SAP Web
Application Server Components -> Internet Communication Manager ->
Error Handling Using the ICM.
Eventhough u have only java stack u'll have an ICM.
Since the value for the parameter is just a string mentioning the path of the folder which contains the customised web pages.
Mention the same path in all the instance profiles (in your case 2 java instances).

Setting profile parameter

Hi all,
To use dynamic error handling in the ICM or Web dispatcher, we must set the profile parameter icm/HTTP/error_templ_path to the directory with the error template files.
How can we do this? Where do we set the profile parameter? Is there any TCode for this?
Regards,
Saurabh

go to rz10
choose instance profile
choose radiobutton extended maintenance.
click change
in the resulting screen click create button now using F4 choose the desired paramter and set its value
check out this online documentation about error template and where it can be stored.
http://help.sap.com/saphelp_nw04/helpdata/en/f6/3c0b0389cea34ba66f10d62b718a1a/frameset.htm
Regards
Raja
check out the following weblog on SDN way of saying thanks.
/people/mark.finnern/blog/2004/08/10/spread-the-love

Profile parameter changes

Hi gurus,
while changing the profile parameter login/min_password_lng, getting error E:login/min_password_lng is not identified identically on all servers. kindly help me to change the profile parameter login/min_password_lng.
thanks in Advance,
Anbu

Hi,
When you define a parameter at instance level this overrides the global definition. I believe you have removed the instance level definition for this parameter ?? Ensure that this parameter is defined ONLY in the DEFAULT profile . The summary is to have one value for this parameter for the whole SAP system rather than having different values for different application servers as a security policy parameter(of this kind) is something to do with a complete SAP system.
Let us know.
cheers !
PRADi

SSF Profile Parameter ssf_md_alg

I need to set an SSF Profile Parameter value, due to a legal requirement in Portugal regarding invoice certification.
The parameter is ssf_md_alg and i need to set it to 'SHA1', but i don´t know where to set SSF parameter values.
Can anyone help ?
Moderator message: relation to ABAP development unclear.
Edited by: Thomas Zloch on Jan 19, 2011 6:14 PM

Hello Anatoly,
I had exactly the same issue with a SSF library provided by SBKontur (RU). Their library "KonturSSF.dll" could not be loaded by ssfrfc.exe on the frontend, the trace file contained something like:
=================================================
=== SSF INITIALIZATION:
===... SSF initialization file C:\Program Files (x86)\SAP\FrontEnd\SAPgui\ssfrfc.ini found.
===...SSF library is C:\Program Files (x86)\SAP\FrontEnd\SAPgui\KonturSSF.dll .
===...SSF trace level is 5 .
===...SSF hash algorithm is SHA1 .
===...SSF symmetric encryption algorithm is DES-CBC .
===...completed.
=================================================
=================================================
=== LOAD SSF FUNCTIONS:
===...could not load SSF library C:\Program Files (x86)\SAP\FrontEnd\SAPgui\KonturSSF.dll .
After some investigation I found out by calling the ssfrfc.exe directly in a Windows command box with option -D, that the library had dependencies to Microsoft's C runtime libraries MSVCP120.DLL and MSVCR120.DLL.
Unfortunately, this is not logged into the SSF RFC Trace File dev_ssfa*, but only shown as error message in a popup window if you execute ssfrfc.exe directly as mentioned before.
So you should try this in order to find out if there are dependencies with your special library.
Kind regards
Heiko

Converted MS Word 2007 to Adobe Acrobat 9 random "Bad Parameter" Error

Question: I Converted MS Word 2007 file which contained 892 pages into Adobe Acrobat 9 Standard afterwards and while needing to update only certain pages I receive the "Bad Parameter" Error. My process is using drop down Document/Extract pages(make my updates)/Replace pages into complete PDF file/ usually with no problem then towards the last pages of the PDF the Error showed up! I believe that it’s possible, the conversion initially may have allowed many tags to be written correctly but some are corrupted. It could be a buffer-overflow failsafe that is having an adverse effect against the two programs because of the file’s size? I have seen some good advice come from many people on this site like "Bill@VT" and "CtDave" and others so I am humbly requesting assistance? Some additional background information is I have to keep the file size the same and I cannot print to PDF file from Word due to a specific format I must keep and most of the PDF is not corrupt: meaning receiving the "Error". I would like to know if the error that seems to be due to the conversion process can be corrected. I have provided some additional similar post below from other customers that may be useful as reference material? R/ Thanks in advance!
“Like 10 others, I get a "bad parameter" pop-up window when I try to delete 1 or more pages from a PDF created from Adobe 8 Pro from Microsoft Word 2007. Of the 3 computers we have tried to delete the pages, we are running Windows XP and Office 2007 on all. But 1 computer has Adobe 7 Pro, one has Adobe 8 Pro, and the 3rd has Adobe 9 Pro. None are able to delete or extract the pages -- we get the bad parameter error each time we try. The PDF has 260 pages and occupies 5.7 MB memory. What additional information can I provide to get a resolution to this problem? Thanks!” “Civilengr10” (posted Aug 17, 2010)
“I am taking adobe files from a database, saving them, and then making changes to them by inserting (from other adobe files from the same database) or deleting pages. Very basic stuff! However, sometimes when I want to insert pages, it will insert them but then say "bad parameter". After that point, I cannot delete any pages. It will give me the "bad parameter" error again and not delete. I have reduced the file size, ran "Examine Document" and removed whatever it wanted me to, and whenever I save a file, I do Save As...instead of Save! Also, under preferences > security I have the "Verify signatures when the document is opened" unchecked. None of these recommendations that I have read elsewhere work. Can someone offer me some guidance? I am working on the files locally. I save the files from the database unto my own folder on the computer. The thing is, some of the files I download from the database are fine and do not give me any error, but others do. Do you know how I can fix the files that are corrupted from the database?” “hoda64” (posted July 22, 2009)
“Problem converting Word 2007 DOC to PDF 9
I have a Word 2007 DOC (not docx) file with pictures and text which converted perfectly with Distiller 8. I installed CS4 Distiller 9, and now the same DOC file flows over onto several extra pages. I am using the default settings. Any idea what has changed? Thanks in advance. “Petrula” (posted Nov 29, 2002) “First, select the Adobe PDF printer in WORD. Then go through the document to check for the flow of the document. It should print the same as you see in the document after the printer has been selected.”

For the replace and delete pages, I can only guess that you are messing up some of the bookmarks or links in the page from what I think you have based on the description. I would work on copies between each stage so that you can at least go back to the last success stage. If possible, you are better to go back and do the modifications in the original page and the recreate the PDF. If that is not possible, then maybe a better explanation of how you are creating the PDF would help folks understand your process fully and suggest a solution.
On the latter, I would do a repair on Acrobat. However, it may be in the process you are using in the conversion from WORD. How are you creating the PDF from WORD? Have you updated AA9 and not simply have 9.0? The confusing point is that you talk about Distiller for getting the PDF from WORD. Distiller is often involved, but only behind the scenes and normally you either print to the Adobe PDF printer, use PDF Maker, or use the MS plugin for PDF creation. So when stating Distiller, it is unclear what process you are using since none of the methods I mention state the use of Distiller even if it is used in the background.

Parameter error

Hi folks,
Slight problem here, i have a form in a HTML page linking to a servlet. The servlet's checking the parameters and using the requestDispatcher to redirect to a JSP page. The servlet is compiling fine, but when after i enter details into the form and click on the submit button, i'm getting a Parameter error. I'll show u the e-mail address i'm adding, then the error checking method (which is compling ok) and then the error it returns, and see if you can shed light on the prob.
e-mail................
[email protected]
checking the parameter..............................
public void doPost(HttpServletRequest req, HttpServletResponse res)
throws ServletException, IOException
// Check e-mail parameter parameter
String[] values = req.getParameterValues("emailAddress");
if (values == null || values.length != 1 || values[0].trim().length() == 0)
this.parameterError1(res);
return;
String par_email = values[0].trim();
the error it returns............................................
private void parameterError1(HttpServletResponse res) throws IOException
res.setContentType("text/plain");
PrintWriter writer = res.getWriter();
writer.print("Parameter error 1.\n");
writer.close();
Any help would be appreciated, thank you!

It is returning "Parameter error 1"?
My guess would be the parameter isn't getting through.
On your HTML page, you have an input with name "emailAddress" (exact match including case) ?
Is your form submitted with method="post" ?
If that doesn't work try the following in your servlet to print out the values.
String[] values = req.getParameterValues("emailAddress");
PrintWriter writer = res.getWriter();
if (values == null){
out.println("Values is null: no parameter was found<BR>");
else{
out.println(values.length "values of emailAddress: <BR>");
for (int i=0; i<values.length; i++){
out.println( i + " = " + values[i] + "<BR>");
}

Profile Parameter to execute Abap Program at user logon.

Hi Experts
I've written a small printer selection program to change the users profile parameter.
Is there another profile parameter that can be given to execute this program automatically
when the user logs on.....The reason why I'm looking for a profile parameter to do this is, that only
certain users need to have this happen at logon.
Kind Regards
Vic

Hi Javi,
I don't think you need a custom process chain for this. You can use delivered Process Chain for logic and hard-code your script name in the package. In that script you can call BADI that has your ABAP program inside.
You can find guides how to build BADI here:[How to Pass Parameters to Custom Logic BADI using START_BADI|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20f4252d-98ca-2b10-e689-f85085ae2d12] or here [Creating Custom Script Logic Keyword BADI's - BPC NW|Creating Custom Script Logic Keyword BADI's - BPC NW;.
Method IF_UJ_CUSTOM_LOGIC~EXECUTE has IT_CV as one of parameters. In your script you probably have to use *XDIM_MEMBERSET to get parameters from DM prompt. IT_CV will have all XDIM members.
Please let me know if you have any other questions.
Regards,
Gersh

User Profile Parameter ID KVS not work

Hi,
I've got some troubles with parameter id KVS. I set it in my user profile,
parameter = KVS
value = B2
description = Version (CO)
when I call report GPCQE53LSADXCC16KZ1R96N5156001, there are two fields with this parameter,
and their value remain "0" instead of "B2".
I need to put the parameter value on one of this two fields, how can I do?
Could someone help me?
thank you in advance,
Fede

You can run Incremental Sync from user profile 3-4 times. This will delete the user profile from SharePoint UPA.
Now, we need to run UPA clean job timer job available in Job Definition inside central administration.
This is a by design issue which you have raised. But, to get it done on the same day you need to follow above mentioned steps. This would be done in some hour and cannot be achieved in 4-5 minutes. So, your original request is a by design issue and can be
done i some hours.
Thank You, Pallav S. Srivastav ----- If this helped you resolve your issue, please mark it Answered.

Configuring profile parameter for a table lock object

Hi Experts-
I want to set the 'wait time' (_WAIT) parameter as a profile parameter for a table lock object.
I have created a lock object on a ZTable. I lock and unlock this object in exclusive non-cumulative mode through the enqueue and dequeue lock object function modules. These generated FMs are invoked via my custom function module.
My function module will run in the background as a scheduled task in R/3. I execute the Enqueue FM at the start of the FM and keep the table locked until the last step finishes in my FM and then I Dequeue it. I want to have the processing wait and retry the Enqueuring FM at set intervals in case the one run doesn't finish entirely and a new run of this same job kicks off.
Thank you,
- Vik.

Set the wait parameter = 'X'. These means that if it encounters a lock, then it will wait a certain time for the lock to be released. This certain time is a system value set by your basis team. I don't imagine it being a very long time.
CALL FUNCTION 'ENQUEUE_EZPIPHYINVREF'
       EXPORTING
            MODE_ZPIPHYINVREF = 'E'
            MANDT             = SY-MANDT
            _WAIT             = 'X'.
Regards,
Rich Heilman

Profile parameter for passwords - conflicting documentations.

Greetings!
I've encountered an issue with profile parameter login/password_max_idle_productive
Integrated help in SU01 says:
You can use the profile parameter login/password_max_idle_productive to define the point as of which the validity of the productive password ends. The time is calculated from the date of the last password change plus the number of days specified in the profile parameter. Password-based logon is then not possible from this point.
This makes this parameter redundant (we have login/password_expiration_time ).
SAP Library says (see link below):
Specifies the maximum period for which a productive password (a password chosen by the user) remains valid if it is not used.
Which suggests that the time after which passwords are considered expired is calculated from last logon date plus whatever is the parameter value.
SU01 help specifies explicitly how this parameter works but it conflicts with a more ambiguous description found in the SAP Library. The observed system behavior on logon is in line with SU01 help, but report RSUSR200 does not list the user as having an expired productive password.
We're on ECC 6.0, release 701 with support package 3. I could not find any SAP notes relating to this issue.
Has anyone encountered this issue before or have I just run into an odd glitch?
[SAP Library|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/22/41c43ac23cef2fe10000000a114084/frameset.htm]

It sounds like you have a requirement to set the expiration time (when the user has to change the password) which is for a different user group than those for which you want to disable an idle password. Currently, both are global settings and affect both user groups (actually, all users of type DIALOG and COMMUNICATION - only SERVICE and SYSTEM type users are not affected).
In that there is an option for you... but be aware of license implications... or you can upgrade to 7.02 early next year (I think this is the correct release, time and release "alias" for it..) and then the config your security policies client dependently!
Currently, your best option is to not set these two global parameters illogically and monitor the user group manually from RSUSR200.
In the wild, many folks use the user type difference to workaround this, but that is also global to the user type so they are excepted from the expiration time as well. Additionally, not all functionality is available to them on the client side (e.g. SAP Logon Tickets won't work) and the authority-checks are even slightly different on some special cases.
Personally, I don't understand why users with authorizations to make purchase requests only should change their passwords more often (expiration time) or be more active (idle time) than those with SAP_ALL etc.
> I hadn't considered SSO since we do not currently use it.
SSO solves several of these problems by deleting the password completely...
Cheers,
Julius
Edited by: Julius Bussche on Oct 8, 2009 9:59 PM

PI 7.1 Exchange profile parameter:

Hi
I got a chance to have a look at PI 7.1. While going through the Exchange Profile parameters, I found a new addition to the existing parameter list. Its called internal. I could not find any information about it.
help.sap documenation also does not make a mention of this parameter
I want to know why this parameter is required. Please help.
Best regards,
Hari

Hi,
I am not sure but most of the Exchange profile parameter are to be for SAP Intyernal use only that should not be altered while custom Installations.
May be that kind of paramteres have sagreegated under Internal category to restrict the changes for it.
Thanks
Swarup

Read profile parameter in ABAP

How could I read out a profile parameter such as zcsa/installed_languages in ABAP?
Is the a function I could use?
regards HT

Here is one way...
REPORT zrich_0001.
types: begin of tpar,
       status type sy-index,
       name(60) type c,
       user_wert(60) type c,
       default_wert(60) type c,
       end of tpar.
data: par_usub type table of tpar with HEADER LINE.
data: par_sub type table of tpar with header line.
call 'C_SAPGALLPARAM' id 'PAR_USUB' field par_usub-*sys*
                      id 'PAR_SUB' field par_sub-*sys*.
read table par_usub with key name = 'zcsa/installed_languages'.
if sy-subrc = 0.
write:/ par_usub-name(30), par_usub-user_wert(20),
          par_usub-default_wert(20).
endif.
REgards,
Rich Heilman

Profile parameter error

Similar Messages

Maybe you are looking for