Profile parameter icm/host_name_full is not set correctly

Hi All,
I am  working on Solution Manager 4.0. When I execute TCODE "SOLUTION_MANAGER", it gives the following error:
Profile parameter icm/host_name_full is not set correctly (see long text)
When I click on "Long Text", it gives me the following message widow:
Message Number: SOL_GRAPHIC002
Diagnosis
The graphic cannot be displayed, since the profile parameter icm/host_name_full is not set correctly.
Procedure
Set the profile parameter icm/host_name_full correctly.
For more information, see SAP Notes 434918 and 677118.
I have referred to both the notes above. In note# 434918, it says that I need latest kernel patch (which is 150).Also the icm/host_name_full parameter parameter was not there in Solution Manager, so I created in the following manner:
Parameter Name =icm/host_name_full
Parameter Value=smgdcs1s.example.com
But however, the error continues to be the same.
Kindly help me asap.
Thanks in advance.
Regards,
Faisal

Hi Markus,
Earlier the profile was activated and server was also restarted. However, it was not efffective.
Now once again i have activated the profile and restared the server. Now I am able to see the profile and it value in
RZ10
RZ11
Thanks a alot for your valuable inputs
Thanks and Regards,
Faisal

Similar Messages

  • ICM Profile Parameter  icm/host_name_full is disabled

    Guys ,
    Coming back to the problem ,  icm/host_name_full is disabled in SMICM . how to fix my prev problem

    Hi Craig,
    I found one discrepancy . When I go to SMICM and the goto Display Parameter , I found this
    Misc                                                                               
    icm/host_name_full             = IGATESAP05                                  
    icm/http_handshake             = 1                                           
    icm/cancel_strategy            = cancel requests without session (stateless) 
    is/HTTP/virt_host_0            = :;                                        
    is/SMTP/virt_host_0            = :;                                                                               
    But when I go to Change Parameter I found that <b>icm/host_name_full</b> value is empty and it is disabled.

  • Setting profile parameter icm/HTTP/error_templ_path

    Hi, I have a SAP Enterprsie Portal installation with only java stack (no abap stack),
    i want to set a profile parameter icm/HTTP/error_templ_path,
    please direct me how to set this parameter, 
    also, i need this parameter to be applicable for the SAP web dispatcher, i mean it should be effective for all java instances (i have 2 java instances),
    please help,.......................as there is no ABAP stack, i dont know where to set this parameter

    That parameter you mentioned describes of where the error templates can be found
    You can generate your own static or dynamic error pages for the ICM
    which are sent to the client if an error occurs. Use this parameter
    to specify the directory in which the ICM can find the pages.
    If this parameter is not set, the ICM returns its own static error
    page.
    For information about how to generate the error pages, see the
    documentation in the SAP Library or using the Help Portal.
    SAP Web Application Server -> Client/Server Technology ->
    Architecture of the SAP Web Application Server -> SAP Web
    Application Server Components -> Internet Communication Manager ->
    Error Handling Using the ICM.
    Eventhough u have only java stack u'll have an ICM.
    Since the value for the parameter is just a string mentioning the path of the folder which contains the customised web pages.
    Mention the same path in all the instance profiles (in your case 2 java instances).

  • Icm/host_name_full is not reflecting in SMICM parameters

    Hi Experts,
    I have changed parameter icm/host_name_full in RZ10 and restarted the instance. Parameter is reflecting in RZ10 and also at OS level but not in  SMICM parameters.
    Please let me know if something needs to be changed.
    Thanks
    Praveen

    Hi Praveen,
    The ICM sets the FQHN using the following hierarchy.                                                                               
    1.  The parameter SAPLOCALHOSTFULL in the SAP profile (recommended for 
         high availability configurations) has the highest priority. If it is
         set in a profile file, the ICM uses this value as the FQHN. Note:  
         the system default value of SAPLOCALHOSTFULL contains the host name
         without domain, so the system default is ignored by the ICM.                                                                               
    2.  If the parameter is not set, icm/host_name_full is analyzed.                                                                               
    3.  If this parameter is not set either, the ICM uses the FQHN of the  
         operating system. For this reason, check the settings of the hosts 
         file at the operating system level.                                                                               
    The parameter SAPLOCALHOST is not fully qualified and is not used by ICM
    for the services.
    So verify SAPLOCALHOSTFULL first, icm/host_name_full second and the HOSTS
    file and DNS entries third.
    Hope this helps
    Michael

  • BKI0008E: The environment variable BI_CALLER is not set correctely. The cur

    Hi All,
    I have configured backint for backup of maxdb for content server 640. I configured it as per the documents available, created the configuration fiale and the parameter file. Created the backup medium in dbmgui.
    Now when i try to run the backup using the pipe am getting the above mentioned error.
    Please find below the dbm.ebp log for the same...
    more dbm.ebp
    2009-10-22 02:06:08
    Setting environment variable 'TEMP' for the directory for temporary files and pi
    pes to default ''.
    Setting environment variable 'TMP' for the directory for temporary files and pip
    es to default ''.
    Using connection to Backint for MaxDB Interface.
    2009-10-22 02:06:08
    Checking existence and configuration of Backint for MaxDB.
        Using configuration variable 'BSI_ENV' = '/sapdb/CFC/lcbackup/apoatlas.env'
    as path of the configuration file of Backint for MaxDB.
        Setting environment variable 'BSI_ENV' for the path of the configuration fil
    e of Backint for MaxDB to configuration value '/sapdb/CFC/lcbackup/apoatlas.env'
        Reading the Backint for MaxDB configuration file '/sapdb/CFC/lcbackup/apoatl
    as.env'.
            Found keyword 'BACKINT' with value '/sapdb/CFC/db/bin/backint'.
            Found keyword 'INPUT' with value '/tmp/backint4sapdbCFC.in'.
            Found keyword 'OUTPUT' with value '/tmp/backint4sapdbCFC.out'.
            Found keyword 'ERROROUTPUT' with value '/tmp/backint4sapdbCFC.err'.
            Found keyword 'PARAMETERFILE' with value '/sapdb/CFC/lcbackup/param.cfg'
            Found keyword 'TIMEOUT_SUCCESS' with value '1800'.
            Found keyword 'TIMEOUT_FAILURE' with value '1800'.
        Finished reading of the Backint for MaxDB configuration file.
        Using '/sapdb/CFC/db/bin/backint' as Backint for MaxDB program.
        Using '/tmp/backint4sapdbCFC.in' as input file for Backint for MaxDB.
        Using '/tmp/backint4sapdbCFC.out' as output file for Backint for MaxDB.
        Using '/tmp/backint4sapdbCFC.err' as error output file for Backint for MaxDB
        Using '/sapdb/CFC/lcbackup/param.cfg' as parameter file for Backint for MaxD
    B.
        Using '1800' seconds as timeout for Backint for MaxDB in the case of success
        Using '1800' seconds as timeout for Backint for MaxDB in the case of failure
        Using '/sapdb/data/wrk/CFC/dbm.knl' as backup history of a database to migra
    te.
        Using '/sapdb/data/wrk/CFC/dbm.ebf' as external backup history of a database
    to migrate.
        Checking availability of backups using backint's inquire function.
    Check passed successful.
    2009-10-22 02:06:08
    Checking medium.
    Check passed successfully.
    2009-10-22 02:06:08
    Preparing backup.
        Setting environment variable 'BI_CALLER' to value 'DBMSRV'.
        Setting environment variable 'BI_REQUEST' to value 'NEW'.
        Setting environment variable 'BI_BACKUP' to value 'FULL'.
        Constructed Backint for MaxDB call '/sapdb/CFC/db/bin/backint -u CFC -f back
    up -t file -p /sapdb/CFC/lcbackup/param.cfg -i /tmp/backint4sapdbCFC.in -c'.
        Created temporary file '/tmp/backint4sapdbCFC.out' as output for Backint for
    MaxDB.
        Created temporary file '/tmp/backint4sapdbCFC.err' as error output for Backi
    nt for MaxDB.
        Writing '/sapdb/CFC/lcbackup/pipe1 #PIPE' to the input file.
        Writing '/sapdb/CFC/lcbackup/pipe2 #PIPE' to the input file.
    Prepare passed successfully.
    2009-10-22 02:06:08
    Creating pipes for data transfer.
        Creating pipe '/sapdb/CFC/lcbackup/pipe1' ... Done.
        Creating pipe '/sapdb/CFC/lcbackup/pipe2' ... Done.
    All data transfer pipes have been created.
    2009-10-22 02:06:08
    Starting database action for the backup.
        Requesting 'SAVE DATA QUICK TO '/sapdb/CFC/lcbackup/pipe1' PIPE,'/sapdb/CFC/
    lcbackup/pipe2' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'BACKINT_ONLINE1'' from
    db-kernel.
    The database is working on the request.
    2009-10-22 02:06:09
    Waiting until database has prepared the backup.
        Asking for state of database.
        2009-10-22 02:06:09 Database is still preparing the backup.
        Waiting 1 second ... Done.
        Asking for state of database.
        2009-10-22 02:06:10 Database is still preparing the backup.
        Waiting 2 seconds ... Done.
        Asking for state of database.
        2009-10-22 02:06:12 Database has finished preparation of the backup.
    The database has prepared the backup successfully.
    2009-10-22 02:06:12
    Starting Backint for MaxDB.
        Starting Backint for MaxDB process '/sapdb/CFC/db/bin/backint -u CFC -f back
    up -t file -p /sapdb/CFC/lcbackup/param.cfg -i /tmp/backint4sapdbCFC.in -c >>/tm
    p/backint4sapdbCFC.out 2>>/tmp/backint4sapdbCFC.err'.
        Process was started successfully.
    Backint for MaxDB has been started successfully.
    2009-10-22 02:06:12
    Waiting for end of the backup operation.
        2009-10-22 02:06:12 The backup tool is running.
        2009-10-22 02:06:12 The database is working on the request.
        2009-10-22 02:06:14 The backup tool process has finished work with return co
    de 2.
        2009-10-22 02:06:17 The database is working on the request.
        2009-10-22 02:06:27 The database is working on the request.
        2009-10-22 02:06:42 The database is working on the request.
        2009-10-22 02:07:02 The database is working on the request.
        2009-10-22 02:07:15 Canceling Utility-task after a timeout of 60 seconds ela
    psed ... OK.
        2009-10-22 02:07:17 The database has finished work on the request.
        Receiving a reply from the database kernel.
        Got the following reply from db-kernel:
            SQL-Code              :-903
    The backup operation has ended.
    2009-10-22 02:07:17
    Filling reply buffer.
        Have encountered error -24920:
            The backup tool failed with 2 as sum of exit codes. The database request
    was canceled and ended with error -903.
        Constructed the following reply:
            ERR
            -24920,ERR_BACKUPOP: backup operation was unsuccessful
            The backup tool failed with 2 as sum of exit codes. The database request
    was canceled and ended with error -903.
    Reply buffer filled.
    2009-10-22 02:07:17
    Cleaning up.
        Removing data transfer pipes.
            Removing data transfer pipe /sapdb/CFC/lcbackup/pipe2 ... Done.
            Removing data transfer pipe /sapdb/CFC/lcbackup/pipe1 ... Done.
        Removed data transfer pipes successfully.
        Copying output of Backint for MaxDB to this file.
    Begin of output of Backint for MaxDB (/tmp/backint4sapdbCFC.out)-
                                     Data Protection for mySAP(R)
                         Interface between BR*Tools and Tivoli Storage Manager
                         - Version 5, Release 4, Modification 0.0  for Linux x86_64
                               Build: 303  compiled on Nov 16 2006
                    (c) Copyright IBM Corporation, 1996, 2006, All Rights Reserved.
            BKI0008E: The environment variable BI_CALLER is not set correctely. The
    current value is "DBMSRV"
            usage:
             backint -p <par_file> [-u <user_id>] [-f <function>]
                    [-t <type>] [-i <in_file>] [-o <out_file>] [-c]
            where:
                   <user_id>    backint utility user
                   <function>   backup | restore | inquire | password | delete
                   <type>       file | file_online
                   <par_file>   parameter file for backup utility
                   <in_file>    name of a text file  that defines the objects
                                default: STDIN
                   <out_file>   Pool for processing messages and the results
                                of the executed function.
                                default: STOUT
            BKI0020I: End of program at: Thu 22 Oct 2009 02:06:14 AM EDT .
            BKI0021I: Elapsed time: 01 sec .
            BKI0024I: Return code is: 2.
    End of output of Backint for MaxDB (/tmp/backint4sapdbCFC.out)---
        Removed Backint for MaxDB's temporary output file '/tmp/backint4sapdbCFC.out
        Copying error output of Backint for MaxDB to this file.
    Begin of error output of Backint for MaxDB (/tmp/backint4sapdbCFC
    .err)----
    End of error output of Backint for MaxDB (/tmp/backint4sapdbCFC.e
    rr)----
        Removed Backint for MaxDB's temporary error output file '/tmp/backint4sapdbC
    FC.err'.
        Removed the Backint for MaxDB input file '/tmp/backint4sapdbCFC.in'.
    Have finished clean up successfully.

    Also, is there any specification about the user permissions and about how the backup should be run?

  • MFL: The dependency is not configured in schema resource. Possible reason one or more import/include is not set   correctly.

    HI Friends,
    I have a created a MFL to transform XML to Non XML format. When am generating a XSD out of this MFL am getting this Error:
    The dependency is not configured in schema resource. Possible reason one or more import/include is not set
    correctly.
    Here is the snippet of the XSD:
    <?xml version="1.0" encoding="UTF-8"?>
    <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
              xmlns="http://www.w3.org/2001/XMLSchema"
              targetNamespace=""
              xmlns:mfl="http://www.bea.com/mfl"
              elementFormDefault="qualified">
        <xsd:import namespace="http://www.bea.com/mfl"/>........
    Later Part i have searched for mfl.xsd in com.bea.wli.core.mflengine_1.x.x.x.jar in my.........../Oracle_OSB1/modules  and imorted this XSD into my eclipse workspace.
    Then i added the schemalocation attribute to the Import element. which looks something like below:
    <?xml version="1.0" encoding="UTF-8"?>
    <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
              xmlns="http://www.w3.org/2001/XMLSchema"
              targetNamespace=""
              xmlns:mfl="http://www.bea.com/mfl"
              elementFormDefault="qualified">
        <xsd:import namespace="http://www.bea.com/mfl" schemaLocation="../../mfl.xsd" />......
    After doing these changes also am getting the same error... can anyone help me out of this????

    Hi Arun,
    Also in SB console we can refer xsds from other projects but again OEPE doesnt seem to support that we will have to make duplicate copies of the resources in each project.It is not like that if you are using OEPE then you can not refer resources from other projects. Just what you need to do is that give relative path of the resource which is there in the file system. It does not matter that to which project it belongs. Yes, now with OEPE, you have to do this manually.
    Regards,
    Anuj

  • [Execute SQL Task] Error: Executing the query "DECLARE_@XMLA nvarchar(3000) ,__@DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,

    Hi
    DECLARE @XMLA nvarchar(3000)
    , @DateSerial nvarchar(35);
    -- Change date to format YYYYMMDDHHMMSS
    SET @DateSerial = CAST(GETDATE() AS DATE);
    --SELECT @DateSerial
    Set @XMLA = 
    N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
     <ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
    xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
    xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
    <KeyErrorLimit>-1</KeyErrorLimit>
    <KeyNotFound>IgnoreError</KeyNotFound>
    <NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
     </ErrorConfiguration>
     <Parallel>
    <Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
    xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
    xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
     <Object>
     <DatabaseID>MultidimensionalProject5</DatabaseID>
     <CubeID>giri</CubeID>
     <MeasureGroupID>Fact Internet Sales</MeasureGroupID>
     </Object>
     <Type>ProcessFull</Type>
     <WriteBackTableCreation>UseExisting</WriteBackTableCreation>
     </Process>
      </Parallel>
    </Batch>';
    EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
     iam executive the    query when iam getting below error.
      [Execute SQL Task] Error: Executing the query "DECLARE
    @XMLA nvarchar(3000)
    , @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
    correctly, or connection not established correctly. 
     how to solve this error;
     please help me

    What are you trying to do? What sort of data source is  SHALL-PCAdventureWorksDw?
    When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
    If you explain why you think this would work in the first place, maybe we can help you.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Error: property is not set correctly for User Defined Fields.

    Hi Gurus,
    I am trying to define a new field Department of type Lookup. For this i have created a new field in user defined fields. But when i click on create user in web console it give me "property is not set correctly for User Defined Fields."
    I created a lookup field for department , but looks like i have to some kind of mapping. How can it be done?
    Thanks,
    sat

    Hi Kevin,
    I couldnt get it done. This is what I had done so far.
    Created Lookup.Users.Dept ( with code code=23 & decode=treasury)
    Added two field in xlwebadmin.properties & xlwebadmin_en.properties
    lookupfield.header.users.deptcode=Department code
    lookupfield.header.users.deptname=Department name
    In my lookfield properties in
    column caption=Department code,Department name
    Column query= Not sure what to give? here
    Thanks,
    sat

  • User mapping is not set correctly..!

    Dear Guru,
    I am working with portal 6.0 SP9, and when I try of create user, the application return "Could not create user" and I am use the user j2ee_admin. This user have admin role
    I think that the user mapping is not set correctly or the permission is not correct.
    The questions is: How can I user mapping set correctly?
    Thanks
    Dy

    Hi Dayana,
    Maybe the user name is shorter than 5 characters?
    Yoav

  • "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly

    Hi,
    I have a SSIS package named FlushFeed4Data that copy data from a table named TableA in a database named DatabaseA located on SQL server 2005 named SQL2005 to another table named Table B in a database named DatabaseB located on a server 2012 named SQL2012.
    The server SQL2005 is setup like a linked server in the server 2012. My package runs smootly: first it removes all old records in SQL2012.DatabaseB.TableB & then copy all records from SQL2005.DatabaseA.TableA  to SQL2012.DatabaseB.TableB to without
    any error message. It runs well both when I ran debugging in SQL Server Data Tools (Microsoft Visual Studio) & when I executed this package in SSIS of server SQL2012. However when I use a job named FlushFeed4Data to run this package, I've got error message:
    Executed as user NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5058.0 for 64 bitCopyright (C) Microsoft Corporation. Code: 0xC002F210. Source: Insert Data Execute SQL Task. Dexcription: Executing the query "Insert
    Into SQL2012.B.[dbo].TableB ..." failed with the following error: "Login failed for user '[MyCompanyDomainName]\SQL2012$' ". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not
    set correctly, or connection not established correctly. End Error DTExec: The package execution returned DTSER_FAILURE (1) ... The package execution failed. The step failed.
    Please help!
    Thanks
    Edward

    Hi Athur,
    Thanks so much for your reply. I'd really appreciate about that. Following the article given by your link, I got error message when trying to create proxy
    sg 14529, Level 16, State 1, Procedure sp_add_proxy, Line 45
    Proxy "MyCompanyDomainName\SSISProxyDemoUser" is not a valid Windows user.
    USE msdb
    --Create a proxy and use the same credential as created above 
    EXEC msdb.dbo.sp_add_proxy 
    @proxy_name = ', 
    @credential_name=N'SSISProxyCredentials', 
    @enabled=1 
    GO 
    So I have a question: Do I have to create a new user account that can access our network named 
    PS: Below are the steps I followed the article:
    --Script #1 - Creating a credential to be used by proxy
    USE MASTER
    GO 
    --Drop the credential if it is already existing 
    IF EXISTS (SELECT 1 FROM sys.credentials WHERE name = N'SSISProxyCredentials') 
    BEGIN 
    DROP CREDENTIAL [SSISProxyCredentials] 
    END 
    GO 
    CREATE CREDENTIAL [SSISProxyCredentials] 
    WITH IDENTITY = N'MyCompanyDomainName\SSISProxyDemoUser', 
    SECRET = N'abcd@0987' 
    GO
    --Script #2 - Creating a proxy account 
    USE msdb
    GO 
    --Drop the proxy if it is already existing 
    IF EXISTS (SELECT 1 FROM msdb.dbo.sysproxies WHERE name = N'SSISProxyDemo') 
    BEGIN 
    EXEC dbo.sp_delete_proxy 
    @proxy_name = N'SSISProxyDemo' 
    END 
    GO 
    and the rest of the script 2 hasn't been proceeded due to error:
    --Create a proxy and use the same credential as created above 
    EXEC msdb.dbo.sp_add_proxy 
    @proxy_name = N'SSISProxyDemo', 
    @credential_name=N'SSISProxyCredentials', 
    @enabled=1 
    GO 
    --To enable or disable you can use this command 
    EXEC msdb.dbo.sp_update_proxy 
    @proxy_name = N'SSISProxyDemo', 
    @enabled = 1 --@enabled
    = 0 
    GO
    Please advise me!
    Thanks,Edward

  • : "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.

     Hi   .
        I was creating the  pass the values t in temp tables  though s sis package vs2012 .
      First I was taken on executive SQL TASK.
     IN EXCUTIVE SQL TASK  . I was write the stored proce:
    Sp;
    reate  procedure  USP_GETEMP2333
    AS
    begin
    Select  eid,ename,dept,salary from emp
    end;
    create table #temp(eid int,ename varchar(20),dept varchar(20),salary int)
      insert into #temp
       exec USP_GETMP02333
       go.
     It was executive correctly.
     I was taken another sequence container. In the sequence container iam creating one   executive  sql
    In 2<sup>nd</sup> excutive sql task: sql statements is
    if object_id('emp_fact_sal') is not null
     drop table emp_fact_sal
    select eid,ename as emp_name,sal_bar=
    case when salary<=5000 then 'l'
    when salary >5000 and salary<=7000 then 'm'
    else
    'h'
    end
    into emp_fact_sal from #temp.
     and one falt flies  it was taken to designation .
     iam changing  all  connection properties:
     in oldeb connection:
    in excutive sal task properties .
    delay validation is true,
    and retain connection maner is also true,
    and package mode is 64 bit is false.
     But iwas excutive in 2<sup>nd</sup> excutive ql task .
    Iam getting this type of errors,
                    [Execute SQL Task] Error: Executing the query " if object_id('emp_fact_sal') is not null
     drop ta..." failed with the following error: "Invalid object name '#Temp'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established
    correctly.
     Please help me

    Arthur suggestion works but you shouldnt even be doing this on a SQL Task.
    Use a data flow task. You'll have better control over the data that is being transfered and get better performance because no staging table will be used.
    Just because there are clouds in the sky it doesn't mean it isn't blue. But someone will come and argue that in addition to clouds, birds, airplanes, pollution, sunsets, daltonism and nuclear bombs, all adding different colours to the sky, this
    is an undocumented behavior and should not be relied upon.

  • AD attributes and passwords not setting correctly

    I am running FIM 2010 R2 build 4.1.3479.0 with AD servers at 2008 forest level.  I have set up the ADMA for staff to set passwords and the userprincipalname attribute (among others).  I have custom code in the MVextension.dll that does this.  I
    am having two issues going on that I believe to be related somehow.  
    1) These initial passwords are not being set and
    2) although the userprinciplename attribute is set correctly when you look in ADUC on the "Attribute Editor" tab, it is not being displayed correctly on the "Account" tab.  The User logon name and the upnsuffix fields are blank.
     The pre-win2k fields are displaying correctly.  
    I have done a lot of work trying to figure out what is going on here and I have checked that there are no issues with rights in AD and the code.  I have another ADMA that populates a different set of users in another OU and that fills out the UPN and
    password and everything works as it should.  The code differences between the two areas are very minimal.
    The code for this is as follows:
             csentry["userPrincipalName"].StringValue = mventry["accountName"].StringValue + emailExtension;
             if (mventry["user_InitialPassword"].IsPresent)
                      csentry["unicodePwd"].StringValue = mventry["user_InitialPassword"].StringValue; // defaultPassword;                     
            else
                      csentry["unicodePwd"].StringValue = Custom_Extensions.Custom_Extensions.GenerateRandomPassword();
    Any ideas what to look at to try and figure out what the heck is going on would be really helpful please!
    Thanks
    Erica

    There are no errors on creation of the user.  There are no errors if I log in as the service account and try to change the password.  
    The emailExtension variable is the same as the one that works for the other users that work.

  • IV_REVERT not set correctly

    Hello,
    let's assume the following scenario (two UIBBs - > A and B):
    1. UIBB A executes process_event with failure and sets ev_result to 'FAILED'
    2. UIBB B process_event is not executed
    3. AFTER_FAILED_EVENT is executed
    a) first in UIBB A (iv_revert = '')
    b) then in UIBB B ( iv_revert = 'X')
    This seems to be fine. Now the failure is in UIBB B:
    1. UIBB A executes process_event successfully
    2. UIBB B has failed and sets ev_result to 'FAILED'.
    3. AFTER_FAILED_EVENT is executed
    a) first in UIBB A (iv_revert is false)
    b) then in UIBB B ( iv_revert is false)
    I'd assume that iv_revert is set to 'X' for UIBB A, but it isn't.
    Any opinion on that (system 700 SP18)?
    Thanks and regards,
    Ulli

    I will try setting them both to RTC, right now they are both set to local, here's a copy of my rc.conf, and (kind of hazy on details) had setup to start the hwclock daemon and it would sync them both (did remove this but time is still way off), idk read that on a forum somewhere, unfortunately it would sync but both times would be wrong after this. Here is my rc.conf
    # /etc/rc.conf - Main Configuration for Arch Linux
    # See 'man 5 rc.conf' for more details
    # LOCALIZATION
    HARDWARECLOCK="localtime"
    TIMEZONE="America/Denver"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    LOCALE=
    DAEMON_LOCALE="yes"
    USECOLOR="yes"
    # HARDWARE
    MODULES=()
    USEDMRAID="no"
    USEBTRFS="no"
    USELVM="no"
    # NETWORKING
    HOSTNAME=Darkstar
    interface=
    address=
    netmask=
    broadcast=
    gateway=
    NETWORK_PERSIST="no"
    # DAEMONS
    DAEMONS=(syslog-ng !network crond dbus wicd)
    ***UPDATE*** Okay so setting to RTC didn't dp anything, did manage to fix the hardware clock being off somehow the BIOS setting had changed however the System clock now won't sync with the Hardware clock, I do hwclock -s and it syncs fine but as soon as I reboot it's off again. It's exactly six hours off right now so I would imagine it would be some sort of time zone setting but the time zone is set correctly to mountain time
    Last edited by kc3 (2012-04-11 16:55:14)

  • Report parameter default value do not default correctly

    Hello Experts, I have a cascading parameters in my report.
    The first parameter called "Project" will allow to select a single Project Name from the list and based on the Project Name, the second parameters which is a "Date" parameter will give out list Months and Year in the Format 'Nov-14'. 
    For this Second parameter I defaulted the parameter to show First Month in the retrieved list of Months. But the problem is it will display the default Date correctly only certain times (there is a refresh problem). If i select a different project and it
    has a month that was retrieved in the first project it will still show the that Month but not the actual default month (Start Month) for that particular Project.
    Example: If I select Brisk from Project parameter, It will give me 18 months of Dates in the Date parameter. In that 18 month range first month is Sep-13 it will default to Sep-13 correctly. Then if I select a different project like "Creek" (example)
    as Project , the Date parameter retrieves some dates corresponding to Creek Project and in the retrieved months if  Date parameter has Sep-13 it will still show Sep-13 even though the
    Start Date for Creek project is Jun-12.
    1. Project Brisk: Defaulted correctly to Sep-13
    2. Creek Project : Should default to Jul-12 but still shows Sep-13
    Just for default value I created a separate dataset and used it to populate the default value and the SQL I used just for default value is as below:
    SELECT DISTINCT TRUNC(DATE_KY, 'MM') AS DEFUALT_DATE
    FROM            DATE_D D
    WHERE        (DATE_KY = ADD_MONTHS(:PROJECT_DT, - 6))
    Date parameter datatype is Date/Time,
    Available Values Tab: label field is a String but the Value field and the default field (Default Values tab) are Dates 
    Thanks in advance

    Thanks Vicky for reply.
    Yes you are right but I did not use First function as the query above retrieves only one date.
    I used your suggestion but it did not fix it.
    In this report I have three parameters.
    1. Project Code (Visible)
    SELECT DISTINCT PROJECT_CODE
    FROM      DIM.PROJECT     
    ORDER BY PROJECT_CODE
    2. Project Date (Invisible)
    SELECT
    MAX(CASENA.MILESTONE
    WHEN'ABCD'THENTRUNC(PROJECT_DATE,'MM')ELSENULLEND)PROJECT_DATE
    FROM
    DIM.PROJECTNA
    WHERE(NA.PROJECT_CODE
    =:PROJECT_CODE
    or'ALL'=:PROJECT_CODE)
    3. Start Date (Visible):
    Available Values Query:
    SELECT DISTINCT
    --DER_DATE is "Value Field"
    TRUNC(D.DATE_KY, 'MM') DER_DATE 
    --Display_date is "Label Field"
    , TO_CHAR(D.DATE_KY, 'Mon-YY')   Display_Date
    FROM DATE_D D
    WHERE DATE_KY BETWEEN ADD_MONTHS(:PROJECT_DATE, -6)  AND ADD_MONTHS(:PROJECT_DATE, 6)
    ORDER BY 1
    Default Values Query:
    SELECT DISTINCT TRUNC(DATE_KY, 'MM') AS DEFUALT_DATE
    FROM            DATE_D D
    WHERE        (DATE_KY = ADD_MONTHS(:PROJECT_DATE, - 6))
    When you select a Project from "Project Code", it will give a "Project Date" and based on the "Project Date" it will give a date range in "Start Date". That is why I am using "Project Date" parameter in my
    query. I even tried using Project code as you suggested but I still got the same result.
    Thanks a lot for your reply.

  • Some labels not set correctly in the en_GB locale

    Hi,
    I've observed this in JDev/ADF 11.1.2.1 and this behaviour is probably the same in older releases.
    Even though my locale is en_GB and I can see it's picked up correctly (server log etc.) , I noticed that the labels for some (or all perhaps) ADF components is still US.
    (e.g. in the search panel, the Saved search drop-down comes with a 'Personali*z*e' option instead of 'Personali*s*e' in the en_GB locale)
    And I can see that the default skin (fusionFX v2 as of 11.1.2.1) does come with multiple resource bundles (e.g. I just changed my locale to IT and the application switched to Italian labels)...
    PS: I am aware we can change the text on a need basis but just wondered if there was a bug logged for this...
    (http://docs.oracle.com/cd/E24382_01/user.1112/e17456/adfsg_text.htm)
    Thanks,
    JV
    Edited by: Jang Vijay Singh on Aug 20, 2012 2:11 PM

    If you don't have an support contract but have a test case showing the problem (along with description on how to set it up if one uses a different locale) you can file this in hte ADF EMG issue tracker (http://java.net/jira/browse/ADFEMG).
    I'm not aware of such a bug, but I'll never use en_GB myself.
    Timo

Maybe you are looking for