Profile selection?

While troubleshooting preference sync issues (which have been resolved), I noticed something.  I have two profiles, but the one with my name is not the one that Premiere has saved my custom workspace and keyboard selections in.  My custom settings have been saved in the "Profile-CreativeCloud-" folder instead.  Within Premiere, I see no method of switching between profiles.  However, if I open up the "Profile Config" file seen in the screenshot, I can change the key "CurrentProfile" successfully and see my custom settings disappear.
So can I consolidate these profiles?  What is the purpose of having a profile with my name, which I can't access normally as a user?

Thank you for your question. Currently in version 33, Firefox has implemented a new, faster way of loading webpages. This new feature is called OMTC. However, there are still some tweaks Mozilla developers are making to this.
There is a known issue that Mozilla works on very hard to fix: if you are experiencing black webpages on some sites, here's what you can do to avoid the problem in the meantime:
Try starting Firefox in [[Troubleshoot Firefox issues using Safe Mode| Safe Mode]]. If the problem no longer happens in Safe Mode, please [/kb/upgrade-graphics-drivers-use-hardware-acceleration#w_turning-off-hardware-acceleration turn off hardware acceleration] and then restart Firefox normally.
Please let us know if this solves the problem. Engineering is also gathering more information about the issue would request that you fill out [http://www.surveygizmo.com/s3/1851506/1c87a6cf309a this survey]
Thank you!

Similar Messages

  • Profile selection window is just black when I open FF

    1. Start FF.
    2. Profile selection window opens as expected.
    3. Profile selection window is completely black, no text or other contols are visible.
    4. If I press enter, FF starts with the last used profile as expected.
    Expected behaviour:
    In step 3) the window should contain a visible list of existing profiles and buttons to create or delete profiles.

    Thank you for your question. Currently in version 33, Firefox has implemented a new, faster way of loading webpages. This new feature is called OMTC. However, there are still some tweaks Mozilla developers are making to this.
    There is a known issue that Mozilla works on very hard to fix: if you are experiencing black webpages on some sites, here's what you can do to avoid the problem in the meantime:
    Try starting Firefox in [[Troubleshoot Firefox issues using Safe Mode| Safe Mode]]. If the problem no longer happens in Safe Mode, please [/kb/upgrade-graphics-drivers-use-hardware-acceleration#w_turning-off-hardware-acceleration turn off hardware acceleration] and then restart Firefox normally.
    Please let us know if this solves the problem. Engineering is also gathering more information about the issue would request that you fill out [http://www.surveygizmo.com/s3/1851506/1c87a6cf309a this survey]
    Thank you!

  • There no lenses listed in the profile selection area. How do I fix this I use canon gear that should

    There no lenses listed in the profile selection area. How do I fix this I use canon gear that should be there. Help!

    There are different profiles for camera Raw, and for camera JPG - and LR filters the lenses list, to show only the profiles available for the particular image you have highlighted.
    If you have selected a JPG image, you will usually see a much shorter or even an empty list of lenses - as compared with what you see if you select a Raw image. Most lens profiles with interchangeable-lens systems, are designed to correct Raw images. On the other hand, if you select an image taken with (say) a compact digital camera or supported cameraphone, any support for that will usually be in JPG.
    You can get a free Lens downloader utility from the Adobe Labs website, which gives access to the full library of lens profiles that the general Adobe user community has uploaded. Each one listed, says whether it is for Raw or not. Some of these will have been generated by end users (using another free utility) and are of variable quality. But you may get lucky, and find just what you need. Or, if it is a rarer lens or if you have particular requirements, it is not so hard to make your own profile using the Adobe utility.
    You do not need to use a profile made specifically for your camera model. The only limitation is: a crop-sensor-generated profile, will not include the right optical coverage for a fullframe camera model.
    Another option is to "kludge" a copy of an existing Raw-only profile, so that it supports JPG instead. This just requires a text editor - you change a line within a structured-text file, from Camera Raw="True", to "False". Then you save that into the Lens Profile folder in the Adobe / CameraRaw area inside your user login's "application data" area.

  • SSO Client: Profile selection dialog

    Hi guys,
    after installing the SSO client for the first time, we have intermittently noticed a profile selection dialog popping up when a user tries to connect to an SNC-enabled SAP system using SAP GUI. The dialog asks the user to select a profile (in our case we have two SLS profiles). The selection is then remembered from that point going forward, same as if the user would make the selection in the client directly (via right-click).
    The question is what exactly triggers that dialog from appearing since we have not been able to reproduce it - even if no profile is selected as "use for secure login".
    Is there a registry key maybe that we're missing? We played around with allowFavorite, but that didn't help.
    Thanks
    Michael

    Hi Valerie,
    I read SAP Note 2067284 and I understand the problem and fix (I think). My customer is on the latest version however we do not see the mentioned pop-up at all but we would like to see it at least once (after a fresh install):
    Each time the user connects to a server, the user is prompted by a pop-up window to select a certificate/profile. The selected certificate/profile is not remembered after a successful login and the user will be prompted again, when he tries to connect to the same server.
    So the part in bold above is what we're interested in, but it does not show at all, not even once.
    Makes sense?
    Thanks
    Michael

  • ECC6.0 t-code COOIS - how to get the "Profile" select-option list

    Hi  PP Gurus
    We are implementing ECC6.0
    We upgraded one of the systems from 4.7 to ECC6.0 (and also kept data: documents, users profiles, variants,u2026etc).
    My question is regarding standard transaction COOIS.
    I do comparison in current 4.7 and ECC6.0 systems (I have SAP_ALL and SAP_NEW in both systems).
    The thing is that in our ECC6.0 system the transaction COOIS doesnu2019t display Profile on select-options screen.
    There are only the following items (select-option screen of COOIS in ECC6.0):
    -LIST
    -LAYOUT
    -Prod.orders checkbox
    -Planned orders checkbox
    u2026And u2018Selectionu2019 tab with other fields
    In the current Enterprise 4.7 system the transaction COOIS displays the following select-option screen:
    -LIST
    -PROFILE
    -LAYOUT
    -Prod.orders checkbox
    -Planned orders checkbox
    u2026And u2018Selectionu2019 tab with other fields
    Questions:
    1.     Is that possible to maintain / see and select a PROFILE in COOIS of ECC6 (or due to new functionality it no more available on that screen ?) How to do that?
    2.     Looking at layouts (I ran COOIS in two systems and compared the results) I canu2019s see in ECC6.0 some icons like u2018Refreshu2019, u2018Order logu2019, u2018Display order componentsu2019, u2018Long textu2019 , u2026.) But all of them are in 4.7 layout. How to get them in ECC6.0 ?
    What I have already explored:
    u2022     ECC6.0 has a new config. t-code COISN (4.7 has only COIS) . I created my new overall profile there, set my own layout, but running COOIS still canu2019t see/use the PROFILE;
    u2022     I have compared the standard structure PPIO_ENTRY_SC1100 in 4.7 and ECC6.0 and found the new component COIS_LISTTYP in ECC6.0. In this situation I ran a new t-code u201CDefine New List Typesu201D (it doesnu2019t exist in 4.7) and created my new entry, but still canu2019t see PROFILE on select-option screen of COOIS in ECC6.0;
    u2022     I also tried situation when both config. transaction COIS (in 4.7 and ECC6.0) had the SAME overall profiles u2013 still canu2019t see PROFILE on select-option screen of COOIS in ECC6.0;
    u2022     I found a new icon u201CNavigation profileu201D in result layout of COOIS ECC6.0 Is that right place where I can maintain the icons I need (see my second question) ?
    THANK YOU.

    Hi,
    The reports are modified if am right as of ECC 5.0. Refer to note - 747469 which gives a list of all reports modified.
    If am right by profile you mean navigation profile, this is now in the display screen. The content remains, only thing is the layout is modified & more structured. So i would suggest you to have a look around in COOIS report & you will find the info.
    The navigation profile is adjacent to the icon called Environment (its a drop down list).
    Revert if you face any issues.
    Regards,
    Vivek

  • Up Date Profile selection

    Hi,
    Clint  has a requirement for controlling budgets  at procurement level andat  consumption level .
    Eg:  Procurement Budget : Purchase Requisition and Purchase Order
    Eg:  Consumption Budget : Goods Issue / Service Entry sheet  and FI direct entry i.e : Expenses Dr , Vendor Credit.
    Which update profile is appropriate.          
    100     1     Payment budget; Payment basis ; Due date
    101     1     Payment budget; Payment basis ; Posting date
    102     1     Payment budget; Invoice basis ; Posting date
    200     1     PB more than 1 yr: CB 1 yr  Ex. Dutch justice min.
    201     1     PB more than 1 yr: CB 1 yr  Ex.Netherlands (w.CCN)
    300     1     Separate PB/CB budget lines; EU
    350     1     Separate PB/CB budget lines  ; standard
    351     1     BL active for cmmt and payment budget (Colombia)
    400     1     CB with target fiscal years  Ex.German local auths
    500     1     Payment prog.avlblty control  Ex. Canadian govt
    600     1     Former Budgetary Ledger - US Government
    601     1     Budgetary Ledger - US Government
    Regards,
    Sujana

    Hi Sujana,
    If you work with version management in MM, please check the following information:
    Deriving the update date from the version management of purchase documents
    If you have activated the version management for the purchase documents purchase requisition and purchase order in Materials Management, then you can determine the posting date when you CREATE or CHANGE purchase requisitions/purchase orders.  This posting date is then copied to the commitment change document.
    The field selection (hide, display, optional entry, required entry) that you can define for the posting date
    in version management has the following effects on the update date in the commitment change document:
    ·        Posting date: Hide, Display, Optional Entry
    If you do not enter a posting date in the purchasing document, the update date created manually (see above) is copied into the corresponding commitment document.
    ·        Posting date: required entry
    If you have defined the posting date as a required entry and do not enter a date, the system date is entered in the purchasing document and is also copied into the corresponding commitment document.
    If you have activated the period-based encumbrance tracking in Funds Management and the version management of Materials Management, you should define the posting date for purchasing documents as optional entry or required entry in the version management.
    I hope this helps.
    Best Regards,
    Vanessa.

  • Color Profile Selection Failure

    First a quick description of my issue:
    I brought my MBP with me on vacation and noticed the colors seemed to be off a bit. I went to Display and the moment I clicked the "Color" tab, the screen colors shifted for half a second, like it changed the profile, before reverting back to whatever profile it is on. When I select a different profile, it changes the colors and even the brightness to that of the new/correct profle (colors look good), but half a second later it reverts back.
    I created a new admin account and the issue was still present. However, when I booted into safe mode, the issue went away and I was able to freely select color profiles (with my default account as well). The moment I disabled safe mode and rebooted, the issue returned.
    I've tried deleting "com.apple.colorsync.profiles.###" with no luck. I've repaired permissions as well and run some Onyx cache flushes and such, but nothing works so far. I do have an external monitor back at home that uses a separate color profile, so maybe connecting and disconnecting it cuased some corruption at some point. I'm not sure. Right now I am more focus on this MBP's display.

    No, profile do many things. It is a color space. It allows different apps and systems to view colors the same. Also fcp typically works in a tub color space not rgb.

  • Global profile select statement error

    Hello,
    I try to set up profiles to personalize reports for users.
    When I use global profile with profile value of first kind  (on a profile value screen i choose "value", type, my formula "="my variable", and click add) and attatch it to the publication, it doesn't work properly. No matter what i use inside formula field, BO environment doesn't personalize report in accordance to it.
    I've noticed that there is something wrong with select statement created by BO. After sending a publication, report instance received by user has "description" field like "(and (equal null "my variable")). No matter what i put inside formula box in profile "equal null" statement is always added.
    When i use second type profile value (filter expression) everythig seems to be fine.
    Is this some kind of bug inside global profile mechanism
    I have BO XI R 3.1 without any fixpacks.
    Thanks in advance for any help
    best regards
    Wojtek

    Hi,
    In the Values option one can only use fixed values no formulas. Hence the formulas will not work.
    In my case the expression option does not work. Have you tried using a formual =CurrentUser in the expression field.

  • Provisioning profile select missing in 2.2??!

    I've just upgraded to the 2.2 SDK and the options in the target info screen for selecting a provisioning profile is now missing in all my projects and any new projects I create
    Is it moved? is it a bug? How do I get this option back?

    The "Code signing identity" field and the "Code Signing Provisioning Profile" field have been merged. Click on "Any iPhone device" and there is a drop-down list which combines the company name and the provisioning profiles, so you just need to select your company name under the provisioning profile that you want to use. Hope this makes sense!

  • Desktop Integration Suite Document Profile selection?

    Is there a way with the DIS (10g) to pre-set or allow the user to select a particular Document Profile so that the Check-In form presented is tailored to the user? Right now the Standard Check-in form is presented which includes meta data information that just doesn't pertain to the context of their Check-in. I reviewed the DIS documentation but didn't see anything jump out at me.

    It looks like Profiles are available via DIS in 11g and that you can use DIS 11g against a 10g Content Server. However, in order to use Profiles in DIS 11g the Help File says the Content Server must also be 11g. This would explain why my Profiles drop down is grayed out.
    +"Please note that profiles are available only if you are connecting to Oracle Content Server 11gR1. They are not available for 10gR3 or 7.5.2 servers. Contact your content server administrator if you need any assistance."+

  • Wrong Lens Profile Selected for JPGs only

    Today I took some pictures, mostly RAW, but a few JPGs. Lightroom 4.1RC, Windows 7 64bit
    When I use the Lens Correction feature on the RAW photos, the proper lens is selected, a Nikon AF-S NIKKOR 16-85mm f/3.5-5.6G ED VR.
    When I use the Lens Correction feature on the JPG photos, the proper lens is NOT selected, instead I see it has selected a Nikon AF-S DX NIKKOR 14-24 f/2.8G ED. In fact, next to "Model", I cannot even select the proper lens (the 16-85mm lens) because its not in the list.
    How do I fix this?

    dj_paige wrote:
    Where are the lens profiles located? or what is their file type?
    The lens profiles in LR4 are located in "C:\Program Files\Adobe\Adobe Photoshop Lightroom 4\Resources\LensProfiles\1.0\" and have an extension of *.lcp.
    If you want to tweak a Raw profile to be used by JPEGs, you need to
    make a copy of the *.lcp file under a new name into folder "C:\Users\[youruser]\AppData\Roaming\Adobe\CameraRaw\LensProfiles"
    (this is where downloaded/user produced profiles should live)
    Edit the copied file using notepad
    Replace all occurences of "<stCamera:CameraRawProfile>True</stCamera:CameraRawProfile>"
    to
    "<stCamera:CameraRawProfile>False</stCamera:CameraRawProfile>", then save
    Restart LR
    Beat

  • Lens profile selection?

    I'm using win 7-64. I have a lens Sony (Zeiss) 55mm/1.8 ZA. Camera Sony Alpha 7R (Full Frame)
    I start with uploading the profile Sony FE and select the lens. This normally works well and Lightroom comes automatically with the right lens/profile.
    Sometimes I upload new photo's (exactly the same as I do always) and the lens selection of Sony FE cannot be found. Only Sony and automatically a zoom lens is chosen and nothing else is available to select. Hence Lightroom select automatically the wrong lens an nothing else is available whilst most of the time it works perfectly and there is nothing changed in the upload procedure.
    Any solution, bug?

    Hello,
    I think I found the answer!
    I always upload the camera files using SONY's PlayMemories but does not change anything and after which I import these files into LR. In order to answer your question to sent a file, I had a look into PalyMemories for the original file and guess what I found, JPG file! I cannot understand this as I'm always using RAW. Lately I did some photo shooting in a studio and someone ask me to shoot a few Photo's too. If I go back in my memory, I have not changed the camera settings and the following photo generated the problem. It cannot be different than the person has adjusted the camera settings without telling me.Than the 1st answer to my question seems correct that the file has already been corrected directly in the camera.
    Notwithstanding this, I wonder that LR gives me the opportunity to select SONY and select a different lens instead of selecting SONY FE and indicating that the correction has already been included in the file.
    Clear to me that I need always to check before shooting instead of assuming that its RAW which I always use.
    In the mean time I wish to ask a different question concerning profiles: I looked for Hasselblad V system lens profiles (CF lenses) but I cannot find any for LR. Do you have information on this?
    Thank you for your assistance.

  • Confirmation profile selection based on material

    Hi All
    Is it possible to have a confirmation profile based on the material which is being produced in the Production order? If yes then please give me your suggestions on how to achieve this.
    regards
    PK

    Hi Madhu G
    I have defined the confirmation profile in Opk0. I know that I can assign a different profile with reference to user.
    I dont want confirmation profile based on Storage location
    I want the confirmation screen to be different for different materials -plant combination. Does anyone have any idea how this can be achieved?
    regards
    PK

  • Print Setup says use Adobe Color Printer with No Color Management even though I have my .icc printer profile selected

    I have a ColorMunki Photo and a Canon Pixma Pro 100 that I have been using on my Mac with Photoshop CC.  No issues.  I must have changed something because now when I go to print, a popup says "Please use Adobe Color Printer Utility if you need to print with No Color Management".  It is telling me that my I am trying to print without color management and this method of printing isn't supported.  So, I reprofiled my monitor and printer and have brand new .icc profiles and it is still doing the same thing.  Can someone tell me the exact things that need to be changed in Photoshop in order to use my .icc profile for color managed printing?  I have no idea what I have changed.  If I change to a different profile that message doesn't pop up.  My document profile says that it is the same as the printer profile I am trying to print from.  Does the document profile need to be set to my monitor .icc profile or the printer .icc profile that I want to print from?  Any help would be appreciated!  It is driving me crazy!

    Please read these very recent thread, as it applies to you in full:
    Re: color settings after calibrating monitor with Spyder 4Pro

  • MAM Profile Selection Variant

    Hi,
    I followed the configuration guide for MAM and created an Variant Operation for the Order Profile. Testing the variant (using IW37) it gives the correct amount of orders (5).
    Now using transaction SE37 to test MAM25_001, it gives me more orders that I should (9 in total). Also in the mobile device I also get the 9 orders.
    It was my understanding that the Variant should reduce the number of orders/operations that are downloaded in the device. It seems that it is ignoring the Variant. Do I need to do additional configuration to allow me use the variant? Thanks in advance.

    Thanks.
    My situation is the following. The backend system was configured so the dispatched can assign different technicians to different operations in a work order, i.e.
    Order 00001
        Operation #1 -> Tech #1
        Operation #2 -> Tech #2...
    I tried to set Order Assignment to EMPLOYEE NUMBER, but then no one get any order. I tried setting it to WORKCENTER but the tech receives all orders even the ones that doesn't have any operation assign to him.
    I was hoping to use the variant to filter the orders, but even with that the tech is receiving all the orders. Any idea? Thanks in advance.

Maybe you are looking for