Profile setting in ebs

Hi All,
I want to have a profile with values as Day,Month and Quarter.Can someone tell me how is this possible.Is it possible to have some default value for this profile
I am not confirmed whether this is a correct forum to post this question or not.If this is not a correct forum then please tell me the forum where I can post this question.
Thanks in advance.
Amrit

Hi amrit;
Please check those notes and see its helpful for your issue:
Note: 282382.1 - How to Search all of the Profile Options for a Specific Value
Note: 470102.1 - How To Check If a Profile Option Is Set In Oracle Application ?
Note: 803587.1 - Script To List The Values Of A Profile Option At All Levels
Regard
Helios

Similar Messages

Creation of a Marketing Profile Set based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset thru the WebUI Segment Builder

Objective: Creation of a Marketing Profile Set based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset thru the WebUI Segment Builder.
Problems: Standard CRM_MKTTG_BP_BIRTHDATE Infoset DOES NEVER RETURN ANY RESULTS on the segmentation builder of the WebUI client (no matter the filter you specify).
Other cases: However if we create a new Data source with data "Extraction from Query" (transaction RS02) based on this standard CRM_MKTTG_BP_BIRTHDATE Infoset and we test the functionality using transaction RSA3, IT DOES RETURN RESULTS (using the same filters as in the segmentation builder)! Of course the segmentation builder works with other attribute lists.
NEW: IF WE DON’T ESPECIFY ANY SEGMENTATION BASE IN THE PROFILE GROUP, IT DOES RETURN RESULTS!!! (GO TO THE END OF THE DOCUMENT FOR DETAILS)
Steps followed:
Review Standard Infoset CRM_MKTTG_BP_BIRTHDATE (Transaction SQ02).Review Data Reading Program code: do we have to change the standard code? We have only remove the "BREAK-POINT" statement.
Creation of a Data source based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset (Transaction CRMD_MKTDS).
Creation of an Attribute List based on that standard Data source and selection the Birth date as a filter in the Attribute list (Transaction CRMD_MKTDS).
On the segment builder of the WebUI set any filter (Example: “TODAY”).
Steps in detail:
Review Standard Infoset CRM_MKTTG_BP_BIRTHDATE
SQ02.
(Image deleted)
Review Data Reading Program code (Code attached)
(Image deleted)
Creation of a Data source based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset
Data source: Transaction: SPRO – Customer Relationship Management - Marketing – Segmentation - Maintain Data Sources and Attribute Lists: CRMD_MKTDS
Create Data Source
(Image deleted)
Infoset: CRM_MKTTG_BP_BIRTHDATE.
Business Partner Field: CRMT_MKTTG_IS_BIRTHDATE-PARTNER_GUID
(Image deleted)
Result:
(Image deleted)
Attribute List
Creation of the Attribute List
(Image deleted)
Assign Data Source:
(Image deleted)
Selection of the Birth date as a filter in the Attribute list:
(Image deleted)
Result:
(Image deleted)
Segment builder of the WebUI:
Access to WebUI with marketing role.
Create Segment:
Creation of Profile Set
Graphical modeler
Create Filter: We have already tried many different filters (we already seen notes referring to this matter).
Example1: “today”
Count target group. Here I would like to stand out that once you click on the “Count” option, immediately it shows 0 results. In other words, it doesn’t process any information. With other attribute lists it takes some time to process, no matter the filter or the attribute list you use. However if we create a new Data source with data "Extraction from Query" (transaction RS02) based on this standard CRM_MKTTG_BP_BIRTHDATE Infoset and we test the functionality using transaction RSA3, IT DOES RETURN RESULTS (with “today” filter and other)! So it seems that the problem has to do with the segment builder, not the Infoset.
Result: it never return any results no matter the filter you specify.
Other cases:
Creation of a new Data source with data "Extraction from Query" where you enter the name of your new query
Creation of a Data source based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset
Standard Infoset CRM_MKTTG_BP_BIRTHDATE:
We fill the form and select “Extraction from Query”:
Press SAVE and define which fields will be available for selection and which of them will be visible.
RSA3: Extractor checker in order to test the Data source:
We specify the Data source:
IT DOES RETURN RESULTS:
ALV Grid:
NEW: It seems that it has to do with the Segmentation Basis selected in the creation of a Profile Set, because if we do not select any, it does return results. But we need to create this Profile Set based on a particular Segmentation Basis called BS Usuarios Registrados.
Segment builder – Profile Set of the WebUISegmentation Basis: we leave it in blanc.
Graphical modeler
Create Filter: We have already tried many different filters (we already seen notes referring to this matter).
Example1: “today”
Count target group.
Result: IT DOES RETURN RESULTS!!! àConclusion: the problem is the Segmentation Basis
Define Segmentation Basis:
Transaction: SPRO – Customer Relationship Management - Marketing – Segmentation – Classic Segmentation - Define Segmentation Basis.BS Usuarios Registrados:
Define Reports for Creating Segmentation Bases
Transaction: SPRO – Customer Relationship Management - Marketing – Segmentation – Classic Segmentation - Define Reports for Creating Segmentation BasesZMK_UTL_MGR_SITES_UREG
Define Usage for Segments:
Transacción: SPRO – Customer Relationship Management - Marketing – Segmentation – General Settings - Define Usage for Segments.ZBS_UR à02 Segmentatión Basis
Attribute List:Category:
There is no Category 02 Segmentatión Basis!!! Why?? Why is not posible to select Category 02 Segmentation Basis in the creation of the Attribute List???
Usage ID
NEW: It seems that it has to do with the Segmentation Basis selected in the creation of a Profile Set, because if we do not select any, it does return results. But we need to create this Profile Set based on a particular Segmentation Basis called BS Usuarios Registrados. Why is not posible to select Category 02 Segmentation Basis in the creation of the Attribute List???

It seems that the standard Infoset doesn’t work by itself with Segmentation Basis. Two SAP notes have been applied and a new Field Group has been added to the Infoset (in order to distint the Segmentation Base).
CRMT_MKTTG_IS_BIRTHDATE-MGRGUID
1966298: MGR_GUID is not populated correctly to infoset read program
2007687:Segmentation InfoSet queries saved with incorrect Master Group
For that reason we had to create a new Infoset based on the standard CRMT_MKTTG_IS_BIRTHDATE, but adding this new Field MGRGUID to the Group Fields.
Issue solved

How to create a profile set for a campaign.

HI Friends,
I am working on CRM 7.0.
My requirement is to create a Batch program for campaign creation and automation.
i have used the class 'cl_crm_mktpl_appl_base' to copy the existing campaign .
It copied the entire target groups,campaign elements, profile sets.
My requirement is for the created campaign id, i need to create a profile set in that i need to create target goups.
Fm : BAPI_PROFILESET_CREATE is not helpful for me in my case.bacause it is asking parent guid ..etc...
I have ony one guid ,ie. campaign guid . if i give this in parent guid it is thriwing error.
can any suggest how to create a custom profile set.
If any one worked on this batch program please reply to this thread.
Edited by: jagadheeswara raju on Feb 10, 2010 7:02 PM

Hi,
I have replied to the below thread mentioning the FM's to create Profile sets, profiles and also target groups. This may be helpful to you.
Re: target group creation
Regards,
Priyanka

Creation of Profile under profile set

Hi Everyone,
My issue is around creation Profile in the programming way using the BAPI or Function modules.
I have created Profile set using BAPI BAPI_PROFILESET_CREATE and target group with BAPI BAPI_TARGETGROUP_CREATE,
but unable to find the correct BAPI to create Profile and link it under the profile set.
I have to look into some forums and found few Function modules below which I have worked.
The Function modules that got triggered is CRM_MKTTG_PF_MAINTAIN, when i try this i am not getting any errors but it is not getting saved in database, i used bapi commit. but in actual creation from GUI sceanrio they are using some other function module CRM_MKTTG_PF_G_SAVE_OB.
Please suggest how to save to database after maintaining profile through CRM_MKTTG_PF_MAINTAIN.
Other scenario when i try using the FM CRM_MKTPF_CHECK_AND_CREATE, when i debug through i get following after coming out of the FM before saving.. We get the error saying Profile set ID does not exist, but actually it exists..
Can anyone let me know the correct data to be passed to the FM to create a Profile...
Thanks
Kranthi

Hello,
thanks for the quick response..
I have tried using the FM CRM_MKTTG_PF_SAVE but i get the error saying Profile not found in buffer...
Thanks

Unable to see Target Groups, Profile Sets, Attributes, Attributes in Web UI

Hi Experts
We upgraded from CRM 5.0 TO New CRM 7.0
In segmentation,under normal segmentation on WEB UI could not see the Attribute lists,profile sets,Segments etc on the Graphical Modeler(Segmentation Builder)
We can see the same in backend GUI under Segmentation Builder (CRMD_MKTSEG)
Do we need to do any settings or configuration to view the same
Thanks
Raj
Edited by: RA_225 on Dec 7, 2009 5:42 PM
Edited by: RA_225 on Dec 7, 2009 6:13 PM

Raj
I am tempted to say java client issue. I say this because SAP support had the same issue with our system to resolve another issue and I believe they had to check local java settings. Also check what version of IE you are running.
Perhaps open a message to SAP to obtain java settings required to run segment builder applet as well as browser settings.
Chris

How transport profile set in segment builder to other CRM system?

Hello!
I create a lot of profile set in segment builder. I using CRM4 and CRM7 wich connected RFC and middleware.
How transport profile group from CRM4 to CRM7?
Edited by: Vladimir Shilov on Dec 19, 2010 11:08 AM

Dear Thomas,
Did this get solved?
Thank you,
-Vijay

Profiles - I have an iPad 1st gen, run iOS5 have have a Profile set up with Lotus Notes to get work email. I want to get a VPN so i can access blocked sites as I travel around the world. The VPN will install a new profile. Can I have more than one

I have an iPad 1 and have a profile set up with Lotus Notes for work email. As I travel around the world I want to install a VPN ( my companies uses a VPN but it is only for work) so I can visit blocked sites. When I install the VPN it want to change the profile. Can I have more than one profile on the iPad or will the VPN overwrite the Lotus Notes profile?
max

Yes, you can have more than one profile installed.

What is this iPad profile setting "wildcard in house"

What is this ipad profile setting "wildcard in house"?

probalby the name of a profile you installed or had pushed to your device. Nobody here would know for sure, otherwise.

Profile set creation problem..

Hi,
I was trying to create profile set..but when I select attribute list from left, I am unable to expand data source ( attribute set & attribute ) & hence unable to drag to modelling area....don't know where did i mess up...?
Your guidance will be appreciated
Thanks in advance
Anil

Hi Deepak,
sorry. lemme tell you what z happening.
Everything is ok till maintaing data source for segment builder.attribute list is created with attribute set. i can see assigned attributes & these are filtered as well.basically in this section I can see my attribute set & expand these to see filtered attributes.no problem so far.
now coming to segment builder craete profile set, then camapign execution then camapign, new profile set is given a name.If i go left to attribute set & scroll to my attribute list I cannot see anything below attributes in component area. it seems nothing is being selected. i tried to save & see. no results.Obviously no drag/drop in staging area.
I know this is a very basic problem but i have nobody around me who i can sit with & sort out. I am just referring different materials & practising on my system.
If you can reply on anilbatra1athotmail.co.uk as i think i shouldn't waste everybody's precious time on such a basic operational issue.
Your prompt reply will be highly appreciated.
regards.
Anil

I believe I have implemented it correctly but I am not receiving the notifications on my phone. I have an ad hoc provisioning profile set up. I have the device token from the phone through NSLOG to console. I have the dot net code running without errors.

I believe I have implemented it correctly but I am not receiving the notifications on my phone. I have an ad hoc provisioning profile set up. I have the device token from the phone through NSLOG to console. I have the dot net code running without errors.The notifications just don’t appear.
Any ideas where I am going wrong?

IMAP account access by itself does not provide for syncing contacts, calendar events, and notes or anything over the air. This is possible with an Exchange account accessed via ActiveSync with the Exchange Server.
If your company email account is an Exchange Account, your company's IT Dept. has enabled IMAP account access for your Exchange account on the Exchange server?
If an Exchange account, the IT Dept. must have ActiveSync enabled for your account on the Exchange Server to create and access the account as an Exchange account which provides Push access for received messages, and over the air syncing for contacts and calendar events with the Exchange Server.

Authorisation for MAster Group or Target Group or Profile set

Hi
How can we restrict certain users from accessing certain Master Groups or Target Groups or Profile sets?
For example we may not want employees in Europe to access target grp pr master grp of Customers in US.
How to do that?
Thanks in advance, reward points for any help.
Regards,
Monica

Hi Monica,
did u find an answer for this query on Target groups
Please let me know
Thanks
Edmonds

Converting a video to mpeg-2 format for a TV station. Format profile set to "main@main" required. How do I do that? Help!

I am converting a video to mpeg-2 format for a TV station and they require me to have a format profile set to "main@main." How do I do that? Help!

Main@main aka MP@ML (main profile @ main level) is the conformance point for most
cable and satellite TV systems.
The station should be able to supply you with specific specs but more than likely they are conforming to what DG deliverable specs also are for MPG-2. One of the big things is in the Xtras tab of the setting.
You must have the YUV 4:2:2 box checked. The caveat being you will not be able to check the files playback on your system. To my knowledge QT/Mac has yet to come up with a way to playback these files(you can play them but there will be no picture).

Segment Builder: Authorisation for Master Groups, Profile set & TargetGroup

Hi Gurus,
On Segment Builder, I've created Master Groups from Target Groups. How do I restrict certain users from accessing certain Master Groups or Target Groups or Profile sets?
Your help is much appreciated.
Thank you.
Regards,
Carol

Hi Monica,
did u find an answer for this query on Target groups
Please let me know
Thanks
Edmonds

Can you install apps with profile set to disallow installation of apps

If I have a config profile set to not allow installation of apps on the iPad, is there any other way to install apps? Here's the reason I'm asking. I have about 25 users spread geographically throughout the southern United States whose profile has been set to not allow installation of apps (presumably via the App Store as that icoe is removed). But, i want to purchase an app for them to use via the Volume Purchasing Program or even a free app (Dropbox). How do I allow them to install these apps without the App Store on the device?

Get an MDM. Have the MDM send the app to the devices. They will be asked for a password to install.
Or.
Get an MDM. Set the profile to allow app install. Send the app via an MDM. Set the profile not to allow app install.
Check out Meraki.
MDM -- moble device management
MDMs
Airwatch, Nukona, Meraki, mobleIron, OS X Server, or Zenprise
Nukona -- https://www.nukona.com/mobile-app-management-products/basic-edition/
Meraki -- A free MDM
http://www.meraki.com/products/systems-manager/
https://discussions.apple.com/thread/4067210?tstart=0
Good howto by Sergio Sosa.
https://discussions.apple.com/thread/2594001?start=15&tstart=0
Apple overview of MDM
http://www.apple.com/support/iphone/enterprise/
IT Resources -- ios & OS X -- This is a fantastic web page.
View documentation, video tutorials, and web pages to help IT professionals develop and deploy education solutions.
http://www.apple.com/education/resources/information-technology.html
business site is:
http://www.apple.com/lae/ipad/business/resources/

IP profile set to 0.25mbps

I live nine months of the year in the USA. When I left the UK last September my Broadband was working fine. I don't know what the speed was, but it was good enough for me to work. When I returned this week my broadband speed was terrible. It was little better than dialup.
I then experienced BT Broadband help for the first time. They identified that the problem was at the exchange. I was told that the problem would be fixed, but would take up to 72 hours. I was stunned. Tell an American he has to wait 72 hours and see how long you stay in business. During this 72 hour wait I have educated myself on Broadband issues, thanks to this forum.
I have learned the IP profile sets my speed. When I left the UK, I turned off the power to everything, unplugged phones, etc.
I have a theory that because BT could not communicate with my Hub they dropped my IP profile number. I don't know if this is done automatically. If it is, I expect it to be reset automatically and not wait 72 hours. If manual, my call to BT should have initiated an Engineer to hit a reset button and again not have to wait 72 hours.
I welcome comments on my theory
Solved!
Go to Solution.

Keith_Beddoe wrote:
It will normally reset itself, provided your connection speed is good enough.
If you would like to provide your ADSL stats forum members should be able to give you a better idea.
Below my ADSL Status. Less than19 hours to go, or is 72 hours an estimate
ADSL line status
Connection information
Line state
Connected
Connection time
2 days, 5:35:49
Downstream
288 Kbps
Upstream
828 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.5
Latency type
Interleaved
Noise margin (Down/Up)
33.5 dB / 7.4 dB
Line attenuation (Down/Up)
27.5 dB / 13.5 dB
Output power (Down/Up)
17.0 dBm / 11.9 dBm
Loss of Framing (Local)
0
Loss of Signal (Local)
0
Loss of Power (Local)
0
FEC Errors (Down/Up)
0 / 48
CRC Errors (Down/Up)
0 / N/A
HEC Errors (Down/Up)
N/A / 1615
Error Seconds (Local)
0

Profile setting in ebs

Similar Messages

Maybe you are looking for