Profile used differently in LR than in PS??

I've installed CS3 and did a Softproof (edit from LR to CS3) of an image from LR using the SP3800_EFP_PK_2880.ICC profile in CS3. The CS3 Softproof looked identical to the image. Print Preview in the 3800 driver looked identical to the image in CS3 and LR. I then viewed Print Preview using the same profile but from LR this time, and the green tint was back, suggesting that it's a LR issue. Here's the example output from Print Preview.
BTW - the first image is the LR print preview and the second the PS print preview, which matches the screen image in LR and PS.
http://members.shaw.ca/claude.biron/PS_vrs_LR_color_shift_test/
Any thoughts/ideas leading to a solution?
I went ahead and printed the image from PS, and the printed result on EFP paper using the PG profile matched the screen image in PS and LR. PS is a trial for 30 days. Do I need to spend $650 just to be able to print?

OK, as I emailed Claude. When I take his image and convert to profile in Photoshop and overlay that with the image in the print preview which I extract by saving the preview as a pdf and dragging that on photoshop and selecting image (which will give me an image in Photoshop in the printer profile that was rendered by Lightroom) it is bit for bit identical to the Photoshop conversion, so Lightroom does use the same algorithm to convert to profile. Something must be wrong either with the printer driver or something else in Claude's setup or we are seeing a difference between the Colorsync engine and the Adobe Engine as the Print preview "soft proof" is done by ColorSync, while Photoshop uses ACE. Fact is that the data in the print file is identical to conversion in Photoshop.

Similar Messages

Using different format video than the sequence.

I am a total newbie to FCP, though quite experienced with avid, premiere and vegas.
I've created a sequence in FCP with setup: 640x480 25p with quicktime settings photo-JPG 75%. I want to do a quick rough edit of tons of random footage I have, all using a variety of different format videos, some quicktime PJPG, some MJPEG, and some DV (no hard to edit mp4, mpeg etc.). I understand that to preview my edit properly I need to render my selection with command or option + R, but at the moment I cannot preview my edit at all without rendering. This is the first time I encounter something like this, other editors will at least play the edit - even applying basic effects, but just dropping frames - I'd need to render to play without dropping frames. But in FCP if my source footage is DV or any other format i just see a big UNRENDERED screen. Is there any way around this without converting all of my footage into P-JPG (which is definitely not a feasible solution).

Yea sorry I should have mentioned, its version 5.1 and its not my machine I'm using it on (Mac Pro 3Ghz 2x dualcore)... hence my profile not showing it. I am considering buying a Mac Pro and FCP (at the moment I have only the Macbook Pro).
I've heard so many positive things about FCP now that I thought the switch was inevitable - and this project I thought would be a good test to try out FCP. But from what I understand I picked a really wrong project to try it out! All the footage is already captured, some captured years years ago - and I need to do a quick edit. ... some of my source files are DV, some are MJPG, some are 640x480, some are 320x240, some are 720x576 etc.
To convert all of this footage to one res/format would require hundreds of gigs, and take way too long... I'd probably finish the edit in premiere on PC before the conversion of the media finished! The point of this edit is to get an idea of the finished piece, to narrow down the areas which I need to extract from all of the footage - i.e. in premiere I would do this rough edit, then 'trim' the project with a massive handle (a couple of seconds), and THEN convert all the trimmed media to one resolution/format (Which would be waaaay quicker, as its only 30-40mins instead of 50 hours) and then finish the edit/grade, work on individual shots in aftereffects, combustion etc. I really don't know much about FCP when it comes to setting up, options, performance etc... so I"m really hoping that I've set something up wrong somewhere. I"ve done DV edits on this machine before and they were very straightforward (DV files, on a DV timeline, DV project etc - nothing out of the ordinary)
MacBook Pro C2D 17" Mac OS X (10.4.9) Week 46 Build

A/R Delivery Note: How to use different COGS account than default

Hi,
when doing the sales delivery, i can change the GL account at the line Item.
Some item i want it go to the default GL account but for the COGS acct i want it "TO GO DIFFERENT COGS ACCOUNT"
I created a new screen for this.. but i stuck there..
Is there any way i can do this?
Thanks in advance..
Bruce..
Message was edited by: Frank Moebius
Changed subject since "Any idea?" might not be too specific

Hi Bruce
The best way to do this is not with development. You can set your gl by wh,item group or items. If the item belong to a specific group. Then make that item group with that certain gl acc determination and when posting documents sbo will do the rest. If it's specific items, then just do the gl acc determination on item level for those items. You can specify in detail for each item which sales,cogs,ect accounts to be used.SBO will do the rest again.
Hope this helps

I need to purchase an app using a different credit card than the one on my account how do I do it

I need to purchase an app using a different credit card than the one on my account how do I do it?

Hello Dylanshopes,
It sounds like you would like to use different payment info than what is currently associated with your account. This article will help you change that information named:
iTunes Store: Changing your payment information
http://support.apple.com/kb/ht1918
Thank you for using Apple Support Communities.
Cheers,
Sterling

HT201622 How do I install apps on a new iPhone 6 that uses a different Apple ID than the one used to purchase the apps?

How do I install apps on a new iPhone 6 that uses a different Apple ID than the one used to purchase the apps?

Sign in to the iPhone or connect the phone to the computer and sign into the store using the original ID and download the apps to the phone?

My iPad has a different Apple ID than the Apple ID on my computer. The iPad Apple ID has an email address that I no longer use. If I try to add the email address that I now use (and which is my Apple ID on the computer), it won't allow me to add it.

My iPad has a different Apple ID than the Apple ID on my computer. The iPad Apple ID has an email address that I no longer use. If (while on the iPad) I go to My Apple ID and try to change or add the email address that I now use (and which already is my Apple ID on the computer), it won't allow me to add it. It says : "Email address is already verified for another Apple ID" I haven't really been aware of this as a problem until I tried (for the first time) to sync my iPad to the computer and became aware that certain things wouldn't transfer. What is the solution to this?

What are you having problems with ?
This post was about having updated the primary email address on an iTunes account via a computer - if you do that you might need to log out of the account on an iPad by tapping on the id in Settings > iTunes & App Store and then log back in with the updated version of the account for that email address change to be recognised on your iPad. If you don't log out and back in then an iPad (or iPhone or iPod Touch) might continue to show the old version of the iTunes account id.

I use different languages in my daily activities, when typing other than English Mac does not recognize them, is there anyway can Mac stop suggesting or automatically correcting me?

I use different languages in my daily activities, when typing other than English Mac does not recognize them, is there anyway can Mac stop suggesting or automatically correcting me?

Is this a problem with the computer or with the word processor? MS Word for example seems to think its grammar and spelling are better than mine - they are not. You have to go into MS Word preferences and uncheck all the useless "help" it wants to provide.

Another "This itunes account is set up to use family sharing with a different icloud account than Apple ID "

I saw another thread on the matter but thought I would post because the circumstances are different. Here is how it happened.
I have had an Apple Store account for years and until recently our family has only had our one Mac and my iPhone 4. Thus any purchases we have made on the Apple App Store were made only with this account.
We recently purchased two iPhone 5S's--one for my wife and one for my daughter. Neither had Apple IDs so first we set up my wife's iPhone and created an Apple ID for her. Next we used the Family Sharing feature to set up an account for our "under age 13" daughter.
Because I am still waiting for my iPhone 6 Plus to arrive, and because the iPhone 4 cannot upgrade to iOS 8, and because my Apple ID is the only account with any apps that have been purchased in prior years, I set up my wife as the Family Organizer but when I set up her account, I chose the option to "share purchases from a different account" and entered the information for my Apple ID.
My daughter is able to view my prior purchases on her iPhone, but when my wife tries to view my prior purchases, she receives the message "This iTunes account is set up to use Family Sharing with a different iCloud account than <her Apple ID>."
I hope Apple is reading this. I would be more than willing to help them on this one as this feature is one of the main reasons I put our family on iPhones.

I had this problem. I finally figured it out yesterday. Try this:
On the device that is having trouble seeing purchases, go to Settings>iCloud>Family Sharing> Then tap on the user of the device you are on. Under "Family Purchases" make sure it has the AppleID of the person for that device. Mine originally had my husbands AppleID in there (he is the Organizer), but I changed it to mine. That doesn't make it so that the purchases are under me. The purchases remained under my husband, but my ID had to be in this spot for it to work.
After that, I closed settings, then I went to Settings>iTunes and App Store> click on the AppleID and Sign Out, even if it has the right AppleID in there. Then Sign In again using the AppleID of the person on that device. Again-- even if it has the right ID in there to start, still sign out and back in.
See if they show up. If they don't show up still, try doing a restart (hold down power button and home button until it restarts).
They should show up by then, but if they don't, at that point, try to go into iCloud and Sign Out and back in.
I think the key is having the right ID in "Family Purchases". I hope this works for you.

I have 1Mac computer running Lion. Can I set up 'find my iPhone' and 'find my iPad' if both those devices use different Apple ID's than the Mac does? As in can I set up 'find device' for my husband's iPhone and my daughters iPad?

I have 1 Mac computer running Lion. Can I set up 'find my iPhone' and 'find my iPad' if both of these devices use different Apple ID's than the Mac does? As in, can I set up 'find my "device"' for my husband's iPhone and my daughters iPad?

Welcome to the Apple Community.
No, but you can log into any of their accounts on your computer at iCloud.com and see their devices.

I need help with color pallette in iPhoto 11. I have created a book and would like to use a different color background than those given in "background." I have found the color palettes but can't seem to incorporate them into my backgrounds palette.

I need help with color pallette in iPhoto 11. I have created a book and would like to use a different color background than those given in "background." I have found the color palettes but can't seem to incorporate them into my backgrounds palette.

That is not a feature of iPhoto - suggest to Apple - iPhoto Menu ==> provide iPhoto feedback.
Additionally I have no idea what you are saying here
I have found the color palettes but can't seem to incorporate them into my backgrounds palette.
And it always helps for you to dientify the version of iPhoto that you are using
LN

My itunes account keeps giving me this Error message. "You are signed in with a different Apple ID than previously used with podcasts. I only have one Apple ID. What do I do?

My itunes account keeps giving me this Error message. "You are signed in with a different Apple ID than previously used with podcasts. Do you want to sync these podcasts subscriptions and stations with "gajppl"" gajppl is my only Apple ID. What do I do?

Please sign out of the iTunes Store by selecting
Store ▹ Sign Out
from the iTunes menu bar. Then sign back in.

Use a different SSO Server than the one specified during install.

Hello,
I found on documentation that OAS Portal Configuration Guide would tell me how to use a different SSO Server than the one specified during install. I need to tell an existing Portal installation to use a new Identity Management infrastructure server I installed.
However, documentation does not mention anything related to that. It states that ptlconfig would do the trick, but ptlconfig instructions are not clear on how to accomplish this.
Could anyone that has done this before, help me out? Thanks in advance...

Hello jlubbers,
That is exactly what I am talking about, the ptlconfig does not model SSO components. So I assume it is incorrectly referenced on several points of documentation as a tool to work with SSO parameters or configuration.
I need to know how to tell my Portal to look at the new SSO server. If someone has done it before, please let me know.
Thanks again.

An app which I have never purchased shows as an update on the App store. When I try to deal qith it shows as being purchased by someone with a different apple id than me. No one else uses my Macbook Pro. Any ideas???

An app which I have never purchased shows as an update on the App store. When I try to deal with it shows as being purchased by someone with a different apple id than me. No one else uses my Macbook Pro. A "Genius" at one of my local Apple stores spent over 2 hours trying to fix this and could not do it. His last suuggestion was to go home, back up all the data an take the computer back to the Apple store to reinstall the operating system. Any simpler ideas to solve this problem.???

Post in the App Store forum:
https://discussions.apple.com/community/mac_app_store

You are signed in with a different Apple ID than previously used with Podcasts. Do you want to sync these podcast subscriptions and stations with "******"?

Why am I getting this error message every time I open iTunes? I'm giving the option of Sync or don't Sync and click sync and there are no problems. But why does it open with: You are signed in with a different Apple ID than previously used with Podcasts. Do you want to sync these podcast subscriptions and stations with “*****”?
<Edited by Host>

Please sign out of the iTunes Store by selecting
Store ▹ Sign Out
from the iTunes menu bar. Then sign back in.

Using a different directory other than /config/domain_name/applications

Is it possible to configure WLS6.1 to use a directory other than "/config/domain_name/applications"
as its default application directory.

Does anyone know if this was fixed, or is it still a problem. Do we really need
to run our applications from within the bea install/config/domain directory?
thanks
Joel
"Michael Frank" <[email protected]> wrote:
Ryan, we have been working with the kinds of application setups that
you
seem to describe. All through WebLogic 5.1, I have insisted on keeping
my
application server directory outside of the BEA WebLogic installation
directory.
With 6.1, I have had some success running with the root directory different
from the home directory. Here is a sample startup sequence, which sets
the
startup root to be other than the WebLogic home directory:
Change to directory: c:\EJC61\wlroot
WL_HOME: c:\bea\wlserver6.1
java -Dbea.home=c:\bea -Dweblogic.RootDirectory=c:\EJC61\wlroot
-Dweblogic.Name=appserver -Djava.security.manager
-Djava.security.policy==c:\bea\wlserver6.1\lib\weblogic.policy
-classpath c:\bea\wlserver6.1\lib\weblogic.jar weblogic.Server
Unfortunately, I recently discovered a problem involving EJB transactions
that could only be resolved when I moved my domain directory back under
the
WL_HOME directory. Basically, I couldn't use transaction=required in
any
but the standard directory setup. I have already sent word of this to
BEA,
but for the time being, I would suggest that you follow the standard
setup
until BEA verifies that they support and have tested alternate directory
setups.
"Ryan Planinshek" <[email protected]> wrote in message
news:[email protected]...
We have scripts that set up various directory structures on a virtualdrive(based
on DEV/DEVTEST/PROD etc.) on the fly and I don't want to touch anythingin
the
Weblogic home.
Basically I am just wondering if this "/config/domain_name/applications"directory
is defined within an XML or some other properties file somewhere...
"Charlie Crook" <[email protected]> wrote:
Why would it matter?
"Ryan Planinshek" <[email protected]> wrote in message
news:[email protected]...
Is it possible to configure WLS6.1 to use a directory other than"/config/domain_name/applications"
as its default application directory.

Profile used differently in LR than in PS??

Similar Messages

Maybe you are looking for