Profiler/CodeCoach not available.
The profiler and code coach options are disabled on my run menu. I have installed OJVM, but I am using JDK1.4.1 and this seems to be the cause.
The applications I am working on use JDK1.4.1 features so I can't compile them with 1.3...
Is there anything I can do to get profiling working?
OJVM is 1.3 certified and runs on Windows. While it is not a supported configuration, when I install OJVM into j2sk1.4, I can run the profilers against a project running against 1.4.
Similar Messages
-
'Profile Server Not Available' error when trying to access Profile Manager
Hello all,
I'm totally, totally new to OS X Server, but I have a class full of new iMac's and MacBook's that I want to be able to manage all in one go. Don't really mind about File Sharing, access from anywhere in the world etc. but I just want to be able to push updates to all of them at once as well as manage some default settings for them all.
I've set up most of what I can see I need to do in OS X Server such as the server itself as a .local, Profile Manager, Websites, VPN, Open Directory and Software Update, but when I try to access my .local through any browser, I get the main screen, but get an error page when I try to go into Profile Manager that says 'Profile Server Not Available. Please wait a moment and try again.'
Can anyone suggest where they think I might be going wrong or need to do? I can give more information or screenshots if needed, juts let me know. Any help super appreciated
Yours,
ElliotHey,
Sorry, because I'm so new I don't quite get what you mean. A little more information is I'm using my MacBook which is connected to the same WiFi network as the other Mac's. What do you mean by the FQDN?
I'm able to type in the IP address etc. on any other of the Mac's and it loads the 'Welcome to OS X Server' page, it's just when I select Profile Manager, I get the error. Thanks for getting back though, appreciated the quick help.. and I'm still super stuck. I've got a whole day on it today ha.
Elliot -
IDoc Receiver, Error in we02 - EDI: Partner profile inbound not available
Hi All,
I have a problem when creating a receiver IDoc from XI to R/3.
I have successfully tested the IDoc when populating the receiver information from the payload. However I want this information to be populated automatically based on the logical systems.
When I do this I get the following error in the IDoc in R/3:
EDI: Partner profile inbound not available
In the control record the sender information is all correct but in the recipient information the partner Number with type LS is populated, but port is not populated.
I have done the following steps.
the sender is a Business Service so I have created a logical system directly adapter-specific identifiers in the sender service in the integration directory.
In the receiver business system I have imported the logical system into the adapter-specific identifiers in the ID from that specified in the SLD.
In the receiving R/3 system using SALE/BD54 I have created a logical system for the source system.
In the receiving R/3 system using we20 I have created a partner profile of type LS with the same name as the source logical system.
IN PI/XI system in transaction IDX1 Ive created a port (SAP<SID> where <SID> is the system ID of the receiving R/3 system) and the client of the R/3 system, and the RFC destination of that system (<SID>CLNT<clnt>, as specified in SM59).
In the IDOC Adapter (receiver) I have entered the RFC destination and port matching those created above. All checkboxes are UN-checked eg. take sender from payload, take receiver from payload, Apply control record values from payload, etc. are all NOT checked.
I think that Ive done everything correctly, but I get the error in we02 in R/3: EDI: Partner profile inbound not available.
Any help will be greatly appreciated (and rewarded, obviously).
Thanks,
Matt.HI Matt,
Can you please copy paste the exact error message....In your error message it will show you Exact partner Number / Logical System name and other parameters...just compared if you have all parameters set in your partner profile comparing to error message...
If you can giev screen shot of both..then probably would be easy to point out error.
Hope this will help.
Nilesh -
EDI: Partner profile inbound not available Message no. E0337
Hi Friends,
I am facing very wiered issue for incoming vendor frieght invoice. When the IDOC is sent to SAP from the edi subsystem, it gets posted with status 56 and error message
EDI: Partner profile inbound not available
Message no. E0337
Diagnosis
An inbound partner profile could not be found with the following key:
/0040000010/LI/VN/INVOIC/MM///
This involves the key fields of table EDP21:
-SNDPRN partner number of sender
-SNDPRT partner type of sender
-SNDPFC partner function of sender
-MESTYP logical message type
-MESCOD logical message code
-MESFCT logical message function
-TEST test flag
I have created the partner profile in WE20 for Partner type LI, partner role VN and process code INVL, message type INVOIC, message code MM. I have also checked the entry in TABLE EDP21 and the entry exists.
When I open the IDOC in WE19, and click on standard inbound TAB it says partner profile not maintianed, however when i click on the control record it opens a dialog box, where we have all the entries for partner profile and when I just click on any field in the dialog box and click continue and when again click on standard inbound it say partner profile maintained.
None of the data is changed in the IDOC control record, I just click on any field and it finds the partner profile.
Please let me know your thoughts, what could be possible reason and a solution.
Thanks
DeepakHi Deepak,
I am facing the same problem with a different message type.
But same effect. I can copy the IDoc with WE19 and it will process nicely, completely unchanged.
Have you found the reason for this?
Thanks,
Florian -
EDI Parner profile Inbound not available
hi friends,
when i am posting in bound IDOC i am getting the error 'EDI: Partner profile inbound not available'.
what could be the problem with this error ?
please suggest me with correct solution .. appriciated as quick response.
According to the error i have done the changes in EDI partner profiles.
- Deepu.Hi,
Check your Inbound partner profile else.
Check the control record Parameter you are sending ,That may be mismatching with the inbound partner profile paramemeters.
Thanks! -
File2Idoc - Error [EDI: Partner profile inbound not available]
Hi All,
I am executing file to Idoc Scenario, It is picking the file from sender & delivering to Idoc as well (fields) in R/3 system and showing chequered flag SXMB_MONI.
But If go to WE02 in R/3 : It is showing that Partner Profile not availbe , I have already mentioned in We20 - R/3 system.
EDI: Partner profile inbound not available
Diagnosis
An inbound partner profile could not be found with the following key:
I checked in Idoc - Control Segments - > It is shwoing Wrong recipient Partner No & Type
Recipient Information :-
Partner No - CLNT_300 Expecting 100008
Partner Type - LS Expecting LI
Where are to maintain these entries ?
Please do the needful.
Regards,
~AnshulSandeep,
I am using simple Idoc Delivery:-
Idoc:DELINF.DELVRY05 Messgae Type u2013 DELINF Process Code -- DELV
But I am getting error in R/3 - WE02
I checked in all entries in We20
EDI: Partner profile inbound not available
Message no. E0337
Diagnosis
An inbound partner profile could not be found with the following key:
/PEVCLNT100/LS//DELINF////
This involves the key fields of table EDP21:
-SNDPRN partner number of sender
-SNDPRT partner type of sender
-SNDPFC partner function of sender
-MESTYP logical message type
-MESCOD logical message code
-MESFCT logical message function
-TEST test flag
Thanks,
Anshul -
EDI: Partner profile inbound not available - message variant
Hi Friends,
I am gettin error "EDI: Partner profile inbound not available" when sending message from XI to R/3 on R/3 side.
I checked to partner profile and it is correctly maintaind .
One thing I noticed is in the control record of that idoc,under typeinfo tab, message type is orders and message variant is ALW. I dont knw what this message vaeiant means,n where it came from, but when i process idoc in we19 by removing this message variant, its working properly..
give ur suggestions.
Thanks........Hi Kiran,
Check your Partner Profile Message Settings in we20.
[Error: "EDI: Partner profile inbound not available";
Regards,
RajeshKumar.D -
Error 56 "EDI: Partner profile inbound not available"
I am tring to post IDOC using we19.
Bu t, I am getting the error 56 "EDI: Partner profile inbound not available"
Could any one please suggest me ..how to solve the problem.Hi Sam,
When you process the inbound IDoc using standard inbound button, the system will perform validation for a given IDoc control record against the partner profile and file port setup. In your case, there is no inbound partner profile setup (WE2) for the corresponding message type. Therefore, you got an error message 'Partner profile not maintained'.
When you process the inbound IDoc using inbound function module button, the system will <b>NOT</b> perform validation against the partner profile and file port setup. The system will call directly the inbound FM to process the inbound IDoc. You may get an error based on validation of IDoc data record within the inbound FM.
In production environment (real case), the system will always validate againts the partner profile and file port setup for incoming IDoc.
Therefore, it is important to have ALE and IDoc corretly setup for inbound and outbound message types.
Again, hope this will help.
Regards,
Ferry Lianto -
Error: "EDI: Partner profile inbound not available"
Hi All,
iam getting the following error while loading the FI related data.
"EDI: Partner profile inbound not available"
Suggestions are appreciated.
thanks
KiranHi,
Refer the link:
Re: EDI: Partner profile not active
With rgdS,
Anil Kumar Sharma .P -
Mac Os X lion Profile server not available
My Profile Manger appears to start but when I attempt to view the 'Profile Manager' web page to setup devices i have an error "Profile Server Not Available... Please wait a moment and try again'
In the system log I have the following error message repeated over and over agin....:
ruby [11504]: Unable to create ProfileManger log file at 'var/log/devicemgr/profilemanager.log' (No such file or directory)
Is there any solution in the following issue.
Please help as soon as possibleHave tried many of the fixes for web services problems that I have found here, and so far nothing resolves this. I also followed apple's instructions for returning web services to default, and still same problem. Also tried copying default apache files from clean install, resetting web services... and no luck.
-
EDI: Partner profile inbound not available
Hi All,
I am doing File to IDOC Scenario.
File got picked up and every where message is successfull, but when i am checking into WE05 of R3 i am getting an error EDI : Partner Profile not available.
I have already created partner profile in R3 side and assigned correponding Inbound parameters (Message type, Process Code, etc) but still why this error is coming please provide some help.
Exact Error details:
EDI: Partner profile not available
Message no. E0 332
Diagnosis
A partner profile could not be found with the following key:
/RPV147 /LS/
This involves the key fields of the table EDPP1:
-PARNUM partner number
-PARTYP partner type
Procedure
Please check the EDI partner profiles.
ThnxHi,
once the idoc is received in SAP R/3 it will try to find the partner profile based on the sender fields in the control record..
i.e SNDPRN - sender partner...
SNDPRT - partner type (LS/KU/LF..)
SNDPFC - Partner funtion...
compare the partner fields created in partner profile with the fields in control record...
Check the below wiki end section if still need more info on the same..
https://wiki.sdn.sap.com/wiki/display/XI/UnabletoconvertSendersystemtoALElogicalsystem
HTH
Rajesh
Edited by: Rajesh on Aug 11, 2010 12:39 PM -
Invoice EDI error : EDI: Partner profile inbound not available
Hi EDI experts ,
We are connecting our SAP ECC 6 ( Ehp 4) system to 3rd party system Mincom via SAP PI, to send PO Creation message (Outbound) and receive Vendor Invoice message( inbound). We already done all the settings..Output determination procedure, Partner Profile ( WE20) , Port creation , Condition Records, EDI settings in SPRO for invoice..etc as below:
Logical system ( BD54)
ECC system - EDACLNT112,
PI systems u2013 IDACLNT210
Third party u2013 LSMINCOM
Port ( WE21)
IDACLNT510 : For PI with RFC destination IDACLNT510
Partner ( WE20)
LSMINCOM : (Partn.Type LS)
Outbound parmtrs.- Partner Role- LS, Message : ORDERS , Port - IDACLNT510
Inbound parmtrs.- Partner Role- LS, Message : INVOIC , Message Variant- MM, Process code u2013 INVL, Trigger immediately (Process code INVL have Identification - IDOC_INPUT_INVOIC_MRM, Option ALE u2013 Processing with ALE services , Processing type- processing by functional module)
Here PO Creation is working fine . IDoC of PO outbound message have below details :
Recipient information:
Port : IDACLNT510 (Logical system & Port created in WE21 )
Partner Number : LSMINCOM ( Logical system and Partner created in WE20)
Partn.Type : LS
Function : LS
Sender information:
Port : SAPEDA ( donu2019t know how it created..but in WE21..it is not there)
Partner number: EDACLNT112 ( Logical system and Partner created in WE20)
Partn.Type : LS
Partner Role :Blank
Just started testing, our PI team is sending the IDoC, with wrong information on partner & other data, so inbound IDoC failing with error u201CEDI: Partner profile not availableu201D. Oaky. I reprocessed these failed IDoCs by changing Partner data just opposite (i.e. Sender info as Recipient info & vice versa) to successful PO Creation O/B message in WE19 in EDIDC and when I click on u201CStandard Inboundu201D, then another window open giving error message u201CPartner profile not maintainedu201D and creates new IDoC with status 56
EDI: Partner profile inbound not availableMessage no. E0337
Diagnosis
An inbound partner profile could not be found with the following key:
/LSMINCOM/LS//INVOIC///X/
This involves the key fields of table EDP21:
-SNDPRN partner number of sender
-SNDPRT partner type of sender
-SNDPFC partner function of sender
-MESTYP logical message type
-MESCOD logical message code
-MESFCT logical message function
-TEST test flag
Procedure
Please check the inbound partner profiles.
Execute function
I am not getting exactly what inbound partner profile could not be found or what is the problem here . Can anyone suggest me what should be the problem and solution on it ?
Thanks
NAPNarendra,
Please advice what was the solution. -
Partner profile are not available.
Hi,
Iam doing file to idoc scenario. when i execute the scenario idoc is created with error 56 showing partenr profile are not avaialble. what will be the exact reason partenr profile in R/3 input parameter is added but still showing the error . Can anybody tel me soultion please.Hi Aparna,
Please see this
The distribution model describes the ALE message flows between logical systems.
Use
You can specify the relationships between logical systems, message types, BAPIs and filters in the distribution model. Applications and the ALE layer use the model to determine receivers and to control the data distribution.
For more information about maintaining the distribution model see the Customizing Implementation Guide (IMG):
SAP Web Application Server
IDoc Interface/Application Link Enabling (ALE):
Modeling and Implementing Business Processes
Maintaining the Distribution Model
http://help.sap.com/saphelp_nw04/helpdata/en/0b/2a610f507d11d18ee90000e8366fc2/content.htm -
Problems with User profile Application not available
Hi
Have a 2 tier SP 2010, with SQL server and a single SharePoint2010 server. We have a problem with the User profile Application service.
The main problem is that we cannot go to "Edit" under Manage User Profiles. If we want to edit a user, we just get an error:
"Microsoft.Office.Server.UserProfiles.UserProfileApplicationNotAvailableException: No User Profile Application available to service the request. Contact your farm administrator."
When rebooting the server, we get the following in event viewer: Warning: ASP.NET 2.0.50727.0
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 2/5/2015 12:25:25 PM
Event time (UTC): 2/5/2015 11:25:25 AM
Event ID: 84d104331476453b88c60a37d7a0b8fe
Event sequence: 9
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1212406818/ROOT-1-130676090755160256
Trust level: WSS_Minimal
Application Virtual Path: /
Application Path: C:\inetpub\wwwroot\wss\VirtualDirectories\14877\
Machine name: SPMACHINE
Process information:
Process ID: 4668
Process name: w3wp.exe
Account name: domain\spfarm
Exception information:
Exception type: UserProfileApplicationNotAvailableException
Exception message: No User Profile Application available to service the request. Contact your farm administrator.
Request information:
Request URL: http://sp2010:2010/_layouts/ProfMngr.aspx?ID=51982fe8-4886-4ebd-ad68-f5934656e54d&IsDlg=1
Request path: /_layouts/ProfMngr.aspx
User host address: ::1
User: domain\spfarm
Is authenticated: True
Authentication Type: NTLM
Thread account name: domain\spfarm
Thread information:
Thread ID: 15
Thread account name: domain\spfarm
Is impersonating: False
Stack trace: at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ProfileAdminPage.get_CurrentApplication()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ProfileAdminPage.get_CurrentApplicationProxy()
at Microsoft.SharePoint.Portal.WebControls.ProfileQueryUsers._FillSubtypeCollection()
at Microsoft.SharePoint.Portal.WebControls.ProfileQueryUsers..ctor()
at ASP._layouts_profmngr_aspx.__BuildControlProfileQuery()
at ASP._layouts_profmngr_aspx.__BuildControl__control6(Control __ctrl)
at ASP._admin_admin_master.__BuildControlPlaceHolderMain()
at ASP._admin_admin_master.__BuildControl__control21()
at ASP._admin_admin_master.__BuildControl__control2()
at ASP._admin_admin_master.__BuildControlTree(_admin_admin_master __ctrl)
at System.Web.UI.MasterPage.CreateMaster(TemplateControl owner, HttpContext context, VirtualPath masterPageFile, IDictionary contentTemplateCollection)
at System.Web.UI.Page.get_Master()
at System.Web.UI.Page.ApplyMasterPage()
at System.Web.UI.Page.PerformPreInit()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)Hi Thomas,
Based on the error message, I recommend to verify the things below:
Please make sure that User Profile Service is started in Central Administration.
Please make sure Forefront Identity Manager Service and Forefront Identity Manager Synchronization Service are started in services.msc.
Change the schedule for the "Timer Service Recycle" job to run during off peak hours, when a small amount of timer jobs are running.
Check ULS log for more detailed error message. For SharePoint 2010, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support -
GRC AC10 RAR :"Ignore Critical Roles/Profile" option not available in
Hello Gurus,
I have configured RAR and the reports are working as usual , but i observed that i could not see two things
1) Option to select "IGNORE CRITICAL ROLES/PROFILE" during Role/User ANALYSIS under "Reports & Analytic" tab.
I checked in SPRO>GRC>AC-->Maintain Config Settings
There is a parameter "Ignore Critical Roles/ Profiles" which i first set to "Yes" and then checked in NWBC , i was unable to see the option under "Additional Option".
Later i changed SPRO setting to "NO" , then again it did not show me .
Where can i find this option , so that if i upload say 10 roles which are assigned to firefighter ID they should not be analyzed for RAR ??
2) I also could not find any option to upload "DEFAULT roles" which need to be assigned to any "NEW USER" request coming through CUP ??
Where can we make this setting, so that the basic roles can get assigned to the user when any new user request comes in.
Will you please put some light on this area ?
Thanks in advance.
Regards,
VictorHi Johanna
Have you run the synchronization job subsequent to the configuration of critical roles / profiles ? If not so try running the Synchronization job and then try risk analysis.
Regards
Swarna
Maybe you are looking for
-
Please help, My daughter has an Ipod, I have an Iphone. Both are on my account. When she facetimes me, I will not go through. It looks to her Ipod like I am calling myself. How do I fix this? Thanks, kniproduction
-
Hi, i am getting the following error while posting an IDoc: Program parameters for LS XXXXXXXX 2002 have not been set. Please suggest what can be the possible reason for it and the probable solution.
-
Any way to get more statistics and response-time info from cache processes?
I'm currently involved in an evaluation of Coherence for use as a global in-core cache/DB for data in the GB range. We'll try to run multiple cache process per cache in order to stay below 512MB heap-space per cache process. In order to tune cache ac
-
Installed new internal hard drive, not working
Hello everyone. I have an iMac model # A1224. My hard drive crashed, therefore I purchased this one: http://eshop.macsales.com/item/Hitachi/0S02860/ I have installed it and when I turn it on I get the gray screen with a blinking question mark. Anyone
-
I have a Subtab layout with 3 sub tabs. in the second tab i want to call a JSP page. How to find which tab is clicked when and how to include JSP page in the corresponding sub tab region when the second tab is clicked. Thanks