Profiles and Notifications

Have 8330. Trying to create filters for audible email alert messages; but when I do, all urgent emails are notifying me. Any suggestions? Thx

Please, more detail.
Filters for audible email alert messages?
Just edit your Profiles:
1. Select the Profiles icon
2. A box will appear where you can quick select between Loud, Vibrate, Quiet, Normal, Phone Only, and Off. If you wish to quick change the device profiles then select the one you want and exit out.
3. If you want to edit the tones assigned to the device applications then select the last option, Advanced
(some older models and OS 4.1 and below will not have the "Advanced" step--if Advanced is not present go directly to Step 4 below).
4. Select the profile you wish to edit. (Loud, Vibrate, Quiet, Normal (default), Phone Only, Off)
Note: on the 8100, 8800, and 8300 models: Do not click the trackball. Instead, click the menu key to the left of the trackball).
Note: The profile that is in use will say: (Active)
5. You will now see a list of all applications that can have a tone assigned (Browser, Calendar, Level 1 Messages, Messages ([email protected]), Messenger, MMS, Phone, SMS, Task ect..)
6. Select the application you wish to edit the tone / notification for
7. You can now edit Out of Holster and In Holster tones/ notifications.
a) Select between: None, Tone, Vibrate, Vibrate+Tone
b) Select the Tune you wish to use
c) Select Volume (options are Mute, Low, Medium, High, Escalating)
d) Select Number of Beeps (options are 1, 2, 3)
e) Select Repeat Notification (options are None, LED Flashing)
f) If set to Vibrate or Vibrate+Tone then select Number of Vibrations (options are 1, 2, 3)
8. Repeat a-e for each of the desired applications listed in 5 above
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Skills Profile and Profile Matchup - Manager Notification

In the Skills Profile and Profile Matchup (service EMPLOYEE_SKILLSENHPROFILE_SERVICE_13) when an employee updates one of their skills there is a message written to the screen that "Your manager will then be notified of the changes.". I do not see any notification being created or a standard workflow for this. What needs to be done to 'activate' these notifications?

Hi Leah
In order to realise this requirement you need set up workflow
For Skills you should use workflow WS1200124 - I believe this
is provided by application componenent CA-GTF-QR
The function module, which creates the event is
HR_EVENT_WF_SUBPROFILE_DEFICIT.
This should be defined in table T779W
as follows
Q 1001 B032 INS PDSP 000 BUS7030     HR_EVENT_WF_SUBPROFILE_DEFICIT
Workflow is activated in transaction PFWS
It should also be mentioned that the standard workflow defaults
to the inbox of the employee- additionally
the workflow needs to be customized as follows to select manager -->
Copy WS to your namespace
The agent for step 0004 Display HR Development Subprofile would have to
be changed from Expression 'Employee' to 'Superior of workflow
initiator (rule) in the workflow builder for this template.
Afterwards it is necessary to activate the event triggering in your
workflow template and deactivate it in delivered template WS01200124.
The whole steps are
Copy workflow
Deactivate even triggering in delivered template
Change Step 004 expression
Save and Activate
Test in ECC
Test in Portal
Alternatively please consider removing text either via Personalization or
NWDI - if you do not wish workflow
Best wishes
Stuart

HT4314 I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

Hi Jamesdwills,
Welcome to the Support Communities!
If you are using the same Apple ID on both devices, the Game Center profile should be the same.
Check out this information from the iPad User Guide. Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
Using Game Center
http://support.apple.com/kb/ht4314
Game Center settings - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9a13d039
Game Center settings
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
Allow invites
Let nearby players find you
Edit your Game Center profile (tap your nickname)
Get friend recommendations from Contacts or Facebook
Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
Change restrictions for Game Center. Go to Settings > General > Restrictions.
Cheers,
- Judy

The Ultimate Guide to Resolving Profile and Device Manager Issues

The following article also applies to issues after re-setting the severs' hostname. It also applies to situations where re-setting the Code Signing Certifictateas described by Apple has not resolved the issue.
Hello,
I have been plagued with Profile Manager and Device Manager issues since day one.
I would like to share my experience and to suggest a way how to resolve issues such as device cannot be enrolled or Code Signing Certificate not accepted.
I shall try to be as brief as possible, just giving an overview of the steps that resolved my issues. The individual steps have been described elsewhere in this forum. For users who have purchased commercial SSL certs the following may not apply.
In my view many of these issues are caused by missing or faulty certificates. So let us first touch on the very complex matter of certificates.
Certificates come in many flavours such as CA (Certificate Authority), Code Signing Certificate, S/MIME and Server Identification.
(Mountain?) Lion Server creates a so-called Intermediate CA certificate (IntermediateCA_hostname_1") and Server Identification Certificate ("hostname") when it installs first. This is critical for the operation of many server functionalities, including Open Direcory. These certs together with the private/public keys can be found in your Keychain. Profile and Device Manager may need a Code Signing Certificate.
The most straightforward way to resolve the Profile Manaher issues is in my view to reset the server created certicates.
The bad news is that this procedure involves quite a few steps and at least 2 hours of your precious time because it means creating a fresh Direcory Master.
I hope that I have not forgotten to mention an important step. Readers' comments and addenda are welcome.
I shall outline a sensible strategy:
1. Clone your dysfunctional server to an external harddrive (SuperDuper does a reliable job)
2. Start the server fom the clone and shut down ALL services.
3. It may be sensible to set up a root user access.
4. Back-up all user data such as addess book, calendar and other data that you *may* need to set up your server.
5. Open Workgroup Manager and export all user and workgroup accounts to the drive that you using to re-build your server (it may cause problems if you back-up to an external drive).
6. Just in case you may also want to back-up the Profile Manager database and erase user profiles:
In Terminal (this applies to Lion Server - paths may be diferent in Mountain Lion !)
Backup: sudo pg_dump -U _postgres -c device_management > $HOME/device_management.sql
Erase database:
sudo /usr/share/devicemgr/backend/wipeDB.sh
7. Note your Directory (diradmin) password for later if you want to re-use it.
8. Open Open Server Admin and demote OD Master to Standalone Directory.
9. In Terminal delete the old Certificate Authority
sudo rm -R /var/root/Library/Application\ Support/Certificate\ Authority/
This step is crucial because else re-building you OD Master will fail.
9. Go back to Server Admin and promote the Standalone Directory to OD Master. You may want to use the same hostname.
10. When the OD Master is ready click on Overview and check that the LDAP and Keberos Realm reflect your server's hostname.
11. Go back to Workgroup Manager and re-import users and groups.
NOTE: passwords are not being exported. I do not know how to salvage user passwords. (Maybe passwords can be recovered by re-mporting an OD archive - comments welcome! ).
12. Go to Server App and reset passwords and (not to forget) user homefolder locations, in particular if you want to login from a network account!
If the home directory has not been defined you cannot login from a network account.
13. You may now want to restore Profile Manager user profiles in Terminal. Issue the following commands:
sudo serveradmin stop devicemgr
sudo serveradmin start postgres
sudo psql -U _postgres -d device_management -f $HOME/device_management.sql
sudo serveradmin start devicemgr
14. You can now switch back on your services, including Profile Manager.
In Profile Manager you may have to configure Device Management. This creates a correct Code Signng Certicate.
15. Check the certificate settings in Server App -> Hadware -> Settings-> SSL Certificates.
16. Check that Apple Push Notifications are set.(you easily check if they are working later)
17. You may want to re-boot OS Server from the clone now.
18. After re-boot open Server App and check that your server is running well.
19. Delete all profiles in System Preferences -> Profiles.
19. Login to Profile Manager. You should have all users and profiles back. In my experience devices have to be re-enrolled before profiles can be pushed and/or devices be enrolled. You may just as well delete the displayed devices now.
20. Grab one of your (portable) Macs that you want to enrol and go to (yourhostname)/mydevices and install the server's trust profile. The profile's name should read "Trust Profile for...) and underneath in green font "Verified".
21. Re-enrol that device. At this stage keep your finger's crossed and take a deep breath.
22. If the device has been successfully enrolled you may at last want to test if pushing profiles really works. Login to Profile Manager as admin, select the newly enrolled device. Check that Automatic Push is enabled (-> Profile -> General). Create a harmless management profile such as defining the dock's position on the target machine. (Do not forget to click SAVE at the end - this is easily missed here). If all is well Profile Manager will display an active task (sending) and the dock's position on the target will have changed in a few seconds if you are on a LAN (Note: If sending seems to take forever: check on the server machine and/or on your router that the proper ports are open and that incoming data is not intercepted by Little Snitch or similar software).
Note: if you intend to enrol an Apple iPhone you may first need to install the proper Apple Configuration software.
Now enjoy Profile and Device Manager !
Regards,
Twistan

HI
1. In Action profiles, logon to system and recheck correcion are available in action definition as well in condition configuration and the schedule condition is also maintained. but the display is not coming(i.e in the worklist this action is not getting displayed).
You can check the schedule condition for the action and match the status values...or try recreating the action with schedule condition again....for customer specific ....copy the standard aciton with ur zname and make a schedule condition and check the same.
2, In suppport team of incident when i give individual processor it throwing a warning that u r not the processor. but when i give org unit it is working perfectly. Could anyone guide on this.
You need to have the empolyee role for BP ..goto BP and got here dropdown for ur bp and choose role Employee and then enter ur userid
also make sure that u have the message processing role
Hope it clarifies ur doubt and resolve ur prob
Regards
Prakhar

MAM RFC Error with Order and Notification SyncBo's

Hi everyone, can you please advise on a problem I'm having when downloading 2-WAY SYNCBO MAM objects.
I am able to download all syncbo's to my client with my username. This includes Orders and Notifications.
But.....whenever I use a different username only some of the SyncBO's come over. I am missing MAM25_001 and MAM25_010 data. Here is what I have done so far:
- Ensured username had exactly the same SAP security profile as I do, including the MI authorization objects.
- Ensured username was configured the same in the IMG.
- Re-generated and re-replicated my SyncBo's.
- Checked table MEREP_10100. It showed no Order or Notification data.
It does not make sense why everything works for me, but not for other usernames on my network.
Here is the RFC error I get from the Middleware using MEREP_MON:
RFC system Error:
Z_MEREP_GEN_S01_____MAM25_010 has finished for run number 0000019624 and runtime counter 17.
Please help. Thanks.

Hi Alex,
Could you please reply the SP levels of the MI Client, MI server and MAM application?
Also is your client device a PDA?
You could try out few things ( not sure whether they will help)
1. Sync several times (may 6 times) for the other users.
2. Remove the MAM application for the one of the other usernames from the webconsole(which is not able get the data) and reassign it.
3. Try the username on some other device.
All the best!!!
Regards,
Rahul

Pls explain terms certificate and notification

hello All ,
can you please let me know the relation between Certificate and notification (how to creat both ) and when this willl be comes during inspection ,
whats the function of both ..i am little confuse ,please help ...
regards
Prerna Varma

Hi
Certificate & notification are different from each other & no relation.
Certificate is a document physical or soft form,which you receive from vendor during receiving or you submit to customer during delivery inspection.
For Receiving Certificate is through QC51 and control key defined in the QM view.
For Delivery Certificate can be created through QC01/QC11 & QC21 t codes with certificate Profile.
Notifications: In QM are either automatically generated or manually created.
like F2 notification against vendor is automatically created auto by recording defect in inspection lot.
& Q2 is notification against vendor is manually created through QM01
I hope this will add some value
Regards
Sujit

User Status Profile for Notification PM

Dear Masters,
I know the steps to create the user statuses and user status profile for notification but I want a brief description on maintaining the user statuses. Can i have any document that can explain me the user statuses.
Hope to find the reply soon. Thanks in advance.
Chin2

Hi Naveen,
Thanks for such a valuable reply, this document is very much helpful to me. See the below example i am showing for the status profile i have created
STATUS PROFILE: ZP-NOTIF
Status number        Status     description                                          Init      Lowest       Highest      position     priority
         1                    OPEN       Open Notification                                no        1                   1                 1               1
         2                    RUNG      Equip. Running Condition                    no         1                   2                1               1
         3                    NRUN      Non-Running Condition                       no         1                   2                1               1
         4                    CLSD      Closed                                                 no         1                   2                1               1
When I am trying to set the first status (OPEN) to the notification, it works fine but even after I am assigning the order to this notification, put notification in process, assign equipment I cannot set the next status (i.e., RUNG) it is showing me the following error:
"Status RUNG is not allowed (QNF 100000000000) " -> ->
Diagnosis
The user status 'RUNG' has reference number 02. In the current object status 'QNF 100000000000', the reference number of a status may not be higher than 01.
Procedure
You can only set user status whose reference number is not higher than 01.
please help me solving this question its a bit urgent.
Thanks once again for your replies.

Set "always show all icons and notifications on the taskbar" via Group policy

Any ideas on how to set "always show all icons and notifications on the taskbar" on a set of users?
I thought it would be under User Configuration\Administrative Templates\Start Menu and Taskbar, but I cannot find it.
Anyone know if this can be enforced via policy?

Hello,
Thank you for your post here.
Unfortunately, there is not any group policy settings which can set "always show all icons and notifications on the
taskbar".
To distribute the setting, you can create a default domain user profile and copy it to the following network share.
When the domain user account is first logged onto the domain, the default profile will be applied.
\\<Server_name>\NETLOGON\Default User.v2
How to customize default user profiles in Windows 7 and in Windows Server 2008 R2
http://support.microsoft.com/kb/973289
This would only apply if a new profile is created, not for existing ones.

Response profile and priority

What is the difference between response profile and priority in notification?

Priority is to indicate to the maintenance department, how urgently you are suppose to respond. When you change priority, system proposes you the new dates based on the priority you have set in the configuration.
Response profile will allow you to use catalogs and define tasks. These can be automated when notifications are created either automatically. If you create maintenance plan with notification as the call object, you get the option of determining tasks automatically. Response profile will allow you to do these. Outstanding tasks also won't allow you to close the notification without completing the tasks.
Regards,
Ketul

In iCal and Notifications on a notebook, is it possible to expand the notes window to make it easier to read and write notes?

In iCal and Notifications on a notebook, is it possible to expand the notes window to make it easier to read and write notes? In the past, I have used Outlook calendar and tasks and I was able to expand the windows which allowed me to put a great amount of details into either the notes section in events and tasks. It would be great to be able to do this in iCal and Notifications as well. I am using a Macbook Pro with OS X 10.8. Thank you very much for assistance with this.

HI,
Try Spaces for a virtual desktop.
http://www.ehow.com/how2189851use-spaces-mac-os-x.html
Carolyn

Problem with Cisco IPMA - between the manager profile and assistant profile

Greetings to all.
The problem basically is that wen I do a call (internal o external) to the extension configured in the manager phone, the assistant phone dosen`t rings or take the call, even the call in progress dosen`t appears in the Cisco Unified Communications Manager Assistant Console of the Assistant
Also the icons of the IPMA in the manager phone dosen`t appears.
I have check the following:
1.The configurations on both profile and its look ok
2.I have restar the Cisco IPMA, CTI and Tomcat Service
3.I have reconfigured the profiles
What else I can do
What is the most common cause in these cases
Thanks

I have the same problem, did you resolve it ?
Our Customer have about 50 IPMA and there are work. The problem is only with 4 IPMA Assistance (always the same). Sometimes (few times in week) lost Assistance icon Managers, and Managers doesn’t see shared lines, Intercom, services IPMA on phone doesn’t work. But sometimes Assistant icon is showing but Manager don’t see active connection and can’t call via Intercom.
Assistance have 7962 Phone with load cmterm-7942_7962-sccp.9-2-3.cop.sgn
Managers have 7965 Phone with load cmterm-7945_7965-sccp.9-2-3.cop.sgn
CUCM (PUB/SUB) is 8.6.2.20000-2
I opened a TAC case already but the problem is not resolved.

ODI Data Profiling and Data Quality

Hi experts,
Searching about ODI features for data profiling and data quality I found (I think) many ... extensions? for the product, that confuse me. Cause I think there are at least three diferents ways to do data profiling and data quality:
In first place, I found that ODI has out of the box features for data profiling and data quality, but, acording to the paper, this features are too limited.
The second way I found was the product Oracle Data Profiling and Oracle Data Quality for Oracle Data Integrator 11gR1 (11.1.1.3.0) that is in the download page of ODI. Acording to the page, this product extends the existing inline Data Quality and Data profiling features of ODI.
Finally, the third way is Oracle Enterprise Data Quality that is another product that can be integrated to ODI.
I dont know if I understood good my alternatives. But, in fact, I need a general explanation of what ODI offer to do Data Quality and Data profiling. Can you help me to understand this?
Very thanks in advance.

Hi after 11.1.1.3 version of ODI release, oracle no longer supports ODP/ODQ which is a trillium software product and this not owned by oracle. Oracle is recommending the usage OEDQ for quality purposes. It's better if you could spend time on OEDQ rather than trying to learn and implement ODP/ODQ in ODI

Oracle Data Profiling and Data Quality

Hi,
How to create metabase for Oracle Data Profiling and Data Quality.Is metabase and repository are same.

Hi,
You can create a metabase in the Metabase Manager:
- Expand Control Admin
- Click on Metabases
- in the Metabases window, right-click on the white area and select Add...
- go through the wizard to create your metabase
This is documented in the ODQ/ODP tutorial (http://www.oracle.com/technology/products/oracle-data-quality/pdf/oracledq_tutorial.pdf) and in the Documentation (in Metabase Manager or Oracle Data Quality go to Help and then Manuals).
Thanks,
Julien

Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I d

Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I do have it listed in my Firewall as an exception program with Permit All. What is happening?
== This happened ==
Every time Firefox opened
== After removing Firefox and Reinstalling it. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; MS-RTC LM 8)

If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See also [[Basic Troubleshooting|#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]

How to use Device Profiles and Viewing Conditions Profile in Photoshop Elements 11?

In trying to get to grips with the Colour management aspects of PSE11, I have encountered the following problems:
Having selected "Display" a sequence of clicks (Change display settings -> Advanced settings -> Colour Management -> Colour Management tab -> Colour Management)
gives a screen which includes the headings:
Device Profile and Viewing Conditions Profile.
1. Device Profile. Besides sRGB and ARGB, the profile list includes the profiles for all of the Epson papers. (I have an Epson Stylus Photo PX810FW).
I changed the Profile to an Epson Grayscale, this was accepted within the menu, but there are no changes from normal when I viewed the image on the Windows screen or within
PSE11. ("normal" is sRGB or ARGB).
I thought it worth a try to test that, if I wanted the display image to closely represent what I would get on a particular Epson paper, this may be a way to do it.(I suspected this approach because I have never
seen it in the literature!).
So what is the purpose of all of the paper Profiles appearing in the Display listing?
2. The Viewing Conditions Profile has also several options. I have tried to find the criteria for choosing one rather than the other, but failed to find any information. Can anyone help? I seek general guidance
rather than the details of the Profiles.
As a seperate question:
Selecting Image on the PSE11 menu across the top of the displayed image, and then Convert Colour Profile, I tried this process on an image, converting tiff to sRGB. When saved there was an extra asterisk in the saved title but in this case,
the file was still labelled tiff and there was no change in the number of Mbs. If a conversion has taken place, how is one to know? Does saving a tiff file as jpeg change its colour profile? When is it useful to use this feature?
Many thanks to all responders!

Addressing your second question, you are confusing two different things.
tiff is an image file format, as is jpeg, as is psd, as is png, as are dozens (if not hundreds, http://en.wikipedia.org/wiki/Image_file_formats) of other formats.
A colour profile represents the colour characteristics of devices so that, for example, displays know how to display the colours, printers know how to print them.
Image files MAY, but do not have to, contain colour profiles.
For details:
http://help.adobe.com/en_US/creativesuite/cs/using/WS52323996-D045-437d-BD45-04955E987DFB. html
http://en.wikipedia.org/wiki/Color_management#Color_profiles
http://en.wikipedia.org/wiki/ICC_profile
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Profiles and Notifications

Similar Messages

Maybe you are looking for