Profiles are gone with Camera Raw 6.7 beta and DNG-Converter

Hello,
when i open a picture taken with the new Nikon D800 neither LR nor PS show the profiles i can see with the pictures taken from the D700. This also doesn't work when i convert them to dng with the beta version 6.7 of the dng-converter.
My workflow uses the x-rite colorchecker to generate profiles. It wouldn't be nice if this will not work any more.
Andreas
new picture                                                      old picture (no changes in program configuration)

Thanks to all answerers,
i think in my first try i did something wrong (didn't check wheter the file was actually created in ..\roaming\adobe\cameraraw\profiles).
The rest was confusing about the camera dependency of the profiles.
Everything works fine now.
Thanks again
Andreas

Similar Messages

  • Camera raw 6-7 beta and + win7 64

    cameraraw6-7_r1_win_030612 won't install on my Win7x64 machine
    I extracted the zip to a folder on my desktop, selected & doulble cliked AdobePatchInstaller, selected "RUN" and I get "error loading updater workflow"
    Did I get the wrong thing? Is there a 64 bit only version?
    cvt

    Well duh - should have thought of that!
    Thanks
    cvt
    Noel Carboni <[email protected]> wrote:
    Noel Carboni http://forums.adobe.com/people/Noel+Carboni created the discussion
    "Re: camera raw 6-7 beta and + win7 64"
    To view the discussion, visit: http://forums.adobe.com/message/4268181#4268181

  • Problem with camera raw for Sony 350K and PSE 6

    I have recently tried to download my first batch of RAW pictures taken with a Sony A350K camera into PSE6 but I am told the format is not recognised.  I thought I had  successfully down loaded ACR 4.6 but apparently not as they are still not recognised.  Can anyone throw any light on what I might be doing wrong?

    If you have left the old version of Camera Raw.8bi in the folder, even if you have renamed it, Photoshop will still use it.
    Follow this link:-
    http://kb2.adobe.com/cps/402/kb402444.html
    and scroll down to the section on installing the plugin in PSE 6.

  • Problem loading large DNG images with Camera RAW!

    Hello,
    When loading large DNGs with Camera RAW 4.4 (for example, DNG dimensions are 9984x6656) CS3 says "cannot open the image because this is not a right kind of a document". EXACTLY THE SAME file is loaded without a problem using Camera RAW 3.7 and 4.0 (did not test other versions). Have you specially prevented loading of large files? Wouldn't it be better to provide this as an option? It's a real disappointment - new version of plugin CANNOT do the thing that older versions CAN. (Simply using older version is not an option, as I need to load RAWs from new cameras, like Canon 450D).
    Dear Adobe, please correct this problem :)

    It might be wise to give some insight like how the DNG was created, by what version of what software, if ACR is hosted in Photoshop or Bridge... What platform you are using, how much RAM, memory allocation, etc.

  • Help render the raw files edited with camera raw how?

    Hi
    i have a problem
    i use  bridge cs5 (updated) to browse my raw files
    often i open my raw files with camera raw inside bridge cs5 and make some corrections like exposure , saturation , contrast and so on
    but after bridge doesn't re-render the files
    i mean the thumbs ,previews , the slideshow still are in default setting
    when i click and open with camera raw inside bridge or with photoshop cs5 ,the raw files look with corretions
    but again bridge show me not with the corrections
    i run under w7 32bit
    what could be the problem?
    thanks

    mantralightroom wrote:
    i see previews and thumbs with the edits but with a big delay
    thanks
    If you are using HQ On Demand you will get fast thumbnails, but there will be a delay in generating the preview as Bridge builds it.
    The Always HQ takes more space, but faster as the data is already in cache.
    Hope this helps.

  • Camera profiles are gone after update of Camera Raw

    Hi,
    After an, automatic, update to camera raw 7.3 in Photoshop Elements 11 all Camera Profiles are gone. All that is left is "Matrix". Can someone please help me?
    I use Elements 11, windows Vista on a 64-bit machine, my camera is a Nikon D7000.
    Thanks!

    Do you have Photoshop CS6 installed on same machine?
    You can install the DNG converter from:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5519
    This will restore all camera profiles on your machine

  • Open with camera raw is gone, any ideas?

    Open with camera raw is gone, any ideas thanks?

    AND FROM THE FINDER:
    Kevin, you keep trying to open files in ACR using the right mouse click menu in Finder and it will never show up. Use Bridge, select the file in the content window and then use right mouse click on a supported file.
    Supported are Raw files according to the list provided on this page:
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    And jpeg and tiff if you have set the camera raw preferences to handling jpeg and tiff files.
    But this works only in Bridge because ACR is a plug in that opens in PS and Bridge. If you choose to the Open With Route you always open ACR in Bridge.
    Setting jpeg and tiff to 'open automatically with settings' means that if you have previous applied ACR settings (the icon for it shows top right of the thumb) you are able to double click or use open to open the files in ACR using PS.
    Setting the prefs to open jpeg and tiff always in ACR means you can use the same options for opening Raw files, but this is not recommended because opening a simple jpeg file in mail or whatever also opens the file first in ACR instead of PS.

  • How can i create a camera profile with camera raw?

    Hi
    how can i create a camera profile with camera raw without x-rite or other third software?
    i have a Colour Checker ,with different shade of gray and different colors
    i remember about a script or something like that
    i google a lot , but without luck
    can i create my camera raw profile using a color checker with photoshop acr ?
    i'm not sure but this should be the script http://simon.tindemans.eu/tools/acrcalibrator , right?
    but i don't know how use it
    is there a tutorial ? maybe a video to create a profile with camera raw
    thanks
    greetings

    Hello, I think that you search for https://www.adobe.com/cfusion/entitlement/index.cfm?e=labs%5Fdngprofileeditor
    Here is a PDF from adobe about it: http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/products/photoshop/pdfs/cs6/ DNGProfile_EditorDocumentation.pdf
    And an article: http://www.luminous-landscape.com/reviews/accessories/dng-profiles.shtml

  • Bridge crashes with camera raw 4.4.1 installed, OK with 4.0

    When I use Bridge with camera raw plugin 4.4.1 installed to navigate to a folder with at least one raw image shot with Sony Alpha 100, it consistently crashes. I can open the same image using Photoshop and Camera raw without a problem, so the image is not corrupted. Bridge works as expected with raw files from Sony Alpha 700.
    If I revert to camera raw plugin 4.0 it works like a charm for Sony Alpha 100 pics, but my new Sony Alpha 700 is not supported.
    I have tried using a clean user account, with no caches at all so that can not be the problem. I'm on a MacBook Pro with OS 10.5.3 and CS3.
    Here is an excerpt from the crash log, showing that it is indeed the camera raw plugin causing the trouble:
    Process: Bridge CS3 [802]
    Path: /Applications/Adobe Bridge CS3/Bridge CS3.app/Contents/MacOS/Bridge CS3
    Identifier: com.adobe.bridge2
    Version: 2.1.1.9 (2.1.1.9)
    Code Type: X86 (Native)
    Parent Process: launchd [604]
    Date/Time: 2008-06-26 08:35:41.310 +0200
    OS Version: Mac OS X 10.5.3 (9D34)
    Report Version: 6
    Exception Type: EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000008
    Crashed Thread: 10
    Thread 10 Crashed:
    b 0 com.adobe.CameraRaw 0x19849da3 0x196a6000 + 1719715
    1 com.adobe.CameraRaw 0x1984a976 0x196a6000 + 1722742
    2 com.adobe.CameraRaw 0x1984b775 0x196a6000 + 1726325
    3 com.adobe.CameraRaw 0x1984cefc 0x196a6000 + 1732348
    4 com.adobe.CameraRaw 0x19982638 EntryFM + 965714
    5 com.adobe.CameraRaw 0x1978dd45 0x196a6000 + 949573
    6 com.adobe.CameraRaw 0x196ed798 0x196a6000 + 292760
    7 com.adobe.CameraRaw 0x1978e63b 0x196a6000 + 951867
    8 com.adobe.CameraRaw 0x196eec2b 0x196a6000 + 298027
    9 com.adobe.CameraRaw 0x19733a15 0x196a6000 + 580117
    10 com.adobe.CameraRaw 0x19926a19 EntryFM + 589875
    11 com.adobe.CameraRaw 0x19927271 EntryFM + 592011
    12 com.adobe.CameraRaw 0x19921b15 EntryFM + 569647
    13 com.adobe.CameraRaw 0x1979c1fb 0x196a6000 + 1008123
    14 com.adobe.CameraRaw 0x198df7bd EntryFM + 298455
    15 com.adobe.CameraRaw 0x198e1c37 EntryFM + 307793
    16 com.adobe.bridge2 0x00420a35 ThumbMetaLib::CameraRawFormat::ReadDraftThumbnail(ZFileSpec const&, ThumbMetaLib::ThumbnailMetaInfo&) + 243
    17 com.adobe.bridge2 0x003fc2d9 ThumbMetaLib::FBFormatReader::ReadDraft(ThumbMetaLib::FBFileFormat*, ZFileSpec const&, ThumbMetaLib::ThumbnailMetaInfo&) + 89
    18 com.adobe.bridge2 0x003f3d61 ThumbMetaLib::MakeDraftFromFile(ThumbMetaLib::FBFileFormat*, ZFileSpec const&, ThumbMetaLib::ThumbnailMetaInfo&) + 207
    19 com.adobe.bridge2 0x0051962e vio_timeout + 78060
    20 com.adobe.bridge2 0x005e3470 vio_timeout + 905006
    21 com.adobe.bridge2 0x005e8ebf vio_timeout + 928125
    22 com.adobe.bridge2 0x00523699 vio_timeout + 119127
    23 com.adobe.bridge2 0x003c5704 Mondo::CThread::EntryProc() + 18
    24 ...ple.CoreServices.CarbonCore 0x9424955b PrivateMPEntryPoint + 56
    25 libSystem.B.dylib 0x970036f5 _pthread_start + 321
    26 libSystem.B.dylib 0x970035b2 thread_start + 34
    Any ideas to resolve this is greatly appreciated!
    Torbjørn

    I'm still looking for some help.
    Now that I've learned a little bit more, let me try to restate my problem. In using both a Nikon D200 and a new Nikon D300. For software I'm using PS CS3 Extended Edition, as a part of Adobe's CS3 Design Premium suite. My Dell Inspiron 530 is running Vista Home Premium.
    As I've said before, my problem is that I cannot open NEF files shot with either the D200 or D300 (and they are uncompressed NEF files). I downloaded the new Camera Raw plug-in, ver. 4.3.1, and unzipped it to \program files\common files\adobe\plug-in\CS3\file format. The Camera Raw.8bi file is dated 11/30/07 and is about 10,446,000 in size. Then I run a search of my hard drive to make sure there are no other Camera Raw files anywhere. Then, in PS Bridge, I purge the cache of the file folder where the NEF files are located. Then I try to open a NEF file and get the following error message in a PS CS3 Extended box:
    "Could not complete your request because it is not the right kind of document."
    Then, immediately afterwards I ran another search of my hard drive, and the Camera Raw.8bi file is GONE, DISAPPEARED, VANISHED.
    Is the problem with the CS3 Entended Edition?
    Can anyone help me out here, particularly you Nikon shooters?
    Thanks for any advice.
    Bob

  • Camera Raw 5.4 beta plug-in error with Hasselblad H3D-39

    Whenever I open a .3FR file taken with my Hasselblad H3D-39 in Adobe Camera Raw 5.4 Beta I get
    "Error. Unable to read the ful size image. There was an unknown error"
    and a white exclamation mark inside a red octagon shows at the top right corner of the image.
    Any idea why and what the implications are?
    Thanks,
    Antonio

    Hi Antonio,
    Two questions...
    1. Are you sure you are using the dialog inside 64-bit Photoshop, or is it possible that you are using the Bridge-hosted Camera Raw dialog to open the files? To check this, verify which application is the current, active, application in the Windows tool bar while the Camera Raw dialog is up (you may have to exit full-screen mode to see it).
    2. Can you open the file if you quit and re-launch Photoshop/Bridge then attempt to re-open the file, does the error still occur?
    Thanks,
    David

  • Possible GPU Issues With Camera Raw 6.6

    Over the past day on my Windows 7 x64 workstation I've done some updates.  Specifically:
    The Adobe updater brought in Camera Raw 6.6, replacing 6.5.
    I updated the to the ATI Catalyst 11.12 display driver version from previous version 11.11.
    I allowed Windows Update to apply the dozen or so changes that were pending.
    I was just doing some OpenGL testing with Photoshop CS5 12.0.4 x64 and I noticed that under some conditions I saw Photoshop drop out of OpenGL acceleration.  Specifically, when I opened a Canon 5D Mark II image through Camera Raw I saw subsequent operations stop using OpenGL acceleration even though the checkmark remained in the [  ] Enable OpenGL Drawing box in Edit - Preferences - Performance.
    What I did to determine whether OpenGL acceleration was enabled was this:  Select the Zoom Tool, then click and hold the left mouse button on the image.  When OpenGL is enabled, I see a smooth increase in zoom.  When it goes disabled, I see only a jump in zoom level after letting up the mouse button.  Also, the [  ] Scrubby Zoom box gets grayed out.  As I mentioned, even in this condition, a check of Edit - Preferences - Performance still shows OpenGL enabled.
    Just as a control, I saved the converted file as a PSD, and every time I opened THAT file (with a fresh copy of PS CS5 running) and did the same operations I could not reproduce the failure.  The difference being I did not run Camera Raw.
    Since I wasn't specifically looking for issues with Camera Raw, I am not sure that the problem occurred every time I did run Camera Raw.  I do know that when I open images from my own camera (40D; I do not own a 5D Mark II) that the problem doesn't seem to occur.  Notably I always open my image from Camera Raw to the largest possible pixel size - 6144 x 4096, as I did with the 5D Mark II image, so it's not an obvious size difference that's leading to the issue.  Given other comments of late, I'm wondering if it could be a specific issue with conversions of files from 5D Mark II.
    Nor am I sure whether any of the above updates caused it - it might done this before; I don't regularly convert 5D Mark II images.  I DO think I would have noticed Photoshop reverting to GDI operation before, since I just noticed it pretty easily, but I'm not completely sure of that either.  I do use OpenGL-specific features (such as right-click brush sizing) pretty often.
    I'm trying now to find a set of steps with which to reliably reproduce the problem now, and will advise.
    -Noel

    Figures.  Now I can't reproduce the problem at all, even after an hour of testing.  It probably had nothing to do with Camera Raw.
    I wonder if there are latent GPU status indicators and config values stored by Photoshop based on its specific environment that might not be right for the first run (or first few runs) after a display driver update.  Hm....
    -Noel

  • PSE 10 from Apple Store problem with camera raw 6.7 upgrade

    PSE 9 was not opening Nikon d4 raw files so I've purchased PSE 10 at the Apple Store and installed on my Mac. PSE 10 is still not opening d4 raw files (camera raw 6.5). I tried to update to 6.7 taken from Adobe but did not succeed to install it. Could you please advice what to do?

    Thanks for your help. It works !!!
    Bartek A
    Wiadomość napisana przez Barbara B. w dniu 17 maj 2012, o godz. 00:34:
    Re: PSE 10 from Apple Store problem with camera raw 6.7 upgrade
    created by Barbara B. in Photoshop Elements - View the full discussion
    You will have to do the update manually for the app store version. Instructions are here:
    http://forums.adobe.com/message/4106477
    (that's for 6.6 but the steps/file paths are the same for 6.7)
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4414265#4414265
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4414265#4414265. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Elements by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Can't open NEF with Camera Raw from Bridge

    I recently updated to CS6 and got a new Nikon D600.  Downloaded the lastest DNG converter but when I pull up files in Bridge I can't open them with Camera Raw anymore.  My process was to open in Bridge.  Select the NEF files I wanted then click mouse+control, which gave me a menu to open in Camera Raw.  Now my only option is Photoshop CS6.  I downloaded the trial for Photoshop CC and Bridge CC but still can't select to open with Camera Raw.
    What is going on?  I have never had issues like I have been.  HELP Please.

    From your description it sounds as if Camera Raw isn't installed, or is installed incorrectly. In Photoshop go to Help/about plug-ins/Camera Raw and verify that you have it installed correctly. Since you are on a Mac, I cannot advise as to where it should be installed.
    The other thing I have been thinking about in your situation is, how were these images downloaded from your camera?if you used an older version of Nikon Transfer it can alter the files so that they cannot be opened in Camera Raw.
    Do you have other software like ViewNX2 or CaptureNX2, and will those programs open your files?

  • Pentax K-x calibration with Camera Raw 3.1, and calibration updates

    The Pentax K-x will save its raw files in either DNG (Adobe) format, or PEF (Pentax) format. Until Camera Raw 3.1 was released, I had my K-x writing DNG files, since there was no support in Apperture for PEF files. With Camera Raw 3.1, the K-x is now explicitly included, so that I could switch to PEF format.
    My initial sense after doing that was that the PEF files were coming in darker than the DNG files had. But when I switched back to DNG, those were darker than I thought they should be, too. Since I had DNG files that had been processed with Camera Raw 3.0, I went back and made new versions, processing those with Camera Raw 3.1. Those, too, were much darker than the same files processed with the earlier raw developer. For examples, this picture is from a K-x DNG master processed with Camera Raw 3.0, while this picture is from the same master, reprocessed with Camera Raw 3.1. I've embedded the histograms shown in the inspector in each. Each of those has no adjustments applied. The JPEG image produced in camera (I shoot Raw+JPEG) is much closer to the brighter 3.0 image than the darker 3.1 image.
    I've seen one other report of similar behaviour with K-x images in here, but that took the approach that the solution was to revert to Camera Raw 3.0, for now, at least. I hate to move backward, particularly if it locks me out of any future updates. So, does Apple have a history of recalibrating cameras that they've already released Raw support for? Might this change in a future Camera Raw update, or is this likely to be what they alway render for the K-x?
    I can get the new style images looking okay (in fact, they seem to have better noise characteristics) with a good deal of adjustment, but not if I confine my adjustments to the Raw Processing brick. There, Boost and Hue Boost are both maxxed out by default, already. If I add adjustments in the exposure brick, and maybe a few others, I can probably get a general set of adjustments that will work as a default for this camera, but how common is it to have to do that?

    Aperture 3 mostly seems to work fine for me, at the moment. There were some issues with importing my iPhoto Library that I've mostly worked out, and some quirks that were fixed by the 3.0.1 update. I'm not saying it's all better, but it's not the doom that one might imagine reading some of the threads here, either.
    I only had the trial version of Aperture 2, though. I only got the K-x in late December, and before that, I had no need for raw processing. The software Pentax supplies is UGLY, though, and iPhoto wasn't cutting it, so I tried the Aperture 2 trial and the Lightroom 3 beta. I concluded that I much preferred Aperture to Lightroom, but I wasn't going to buy Aperture 2 when all the speculation was that Aperture 3 was right around the corner, or not coming at all. Since my Aperture 2 trial had run out, it wasn't a hard choice to buy Aperture 3 as soon as it came out. I do find I use the editing brushes more than I imagined I would, and I'm very happy that it now directly supports my camera - I've switched to shooting PEF raw instead of DNG raw.

  • Minolta DiMAGE A200 support broke with Camera Raw 2.1

    Hi,
    I am new to this forum, but I hope someone can help.
    Using Aperture since 1.5 with a couple of cameras I started with my Minolta DiMAGE A200. Unfortunately this camera was not supported by Aperture, but the identical A2.
    Of course there was a trick to bring A200 Raw support to Apple by editing Raw.plist . This worked perfectly (since the RAW files are identical for A200 and A2).
    With Camera Raw update 2.2 onwards this trick does not work anymore. The syntax and I also think the OS internal handling of Raw files did change. Worse, Mac OSX 10.5.6 seems to need Camera Raw >2.1 . So staying with the old Camera Raw package does not work.
    Of course I don´t want to blame Apple for breaking a hack, but since the beginning I never understood, why Apple does not support a identical camera model!
    Has anybody similar issues or a hint how to proceed? (without going to .dng)
    Best regards
    Joe

    Hi all,
    I contacted Konica Minolta tech support and they confirmed that the A200 is supported under Tiger (10.4) and should also work with iPhoto. Here's the email I received:
    "The camera will work on OS Tiger but we cannot comment on iPhoto as it is not one we have tested it on however we provide software called DiMAGE Viewer which will work with the camera. We have many customers using the camera with Tiger with no issues."
    I then found the following Mac OS compatibility info on Konica's tech support site:
    http://www.konicaminoltaphotoworld.com/kmsupport.com/Compatibility.3036.0.html?& L=0#).
    To summarise, Konica state that Mac OS 10.1 - 10.3 are fully supported and limited testing has shown that 10.4 works as well. There's no mention of iPhoto compatibility. The document also mentions possible file corruption for transfers over 10 mins and issues with date and time info not being transferred to the Mac. I thought these were a tad worrying so I sent a follow-up email to Konica tech support. Here's the reply I received:
    "It should work fine with Iphoto.The information regarding MAC OS X.
    There can be corruptions with transfers of over 10mins but not necessarily and therefore it is recommend to split transfers and also the data and time may not be transferred correctly and these I am afraid are issues which should be resolved when newer DiMAGE Software is released, however they might not occur at all and is only a precaution."
    So... it's all a bit vague. Seems like it will definitely work with OS 10.4 but you might get some of the problems mentioned above... and then again you might not! Also, in the above reply, Konica mention that these issues should be fixed in a new version of their DiMAGE software. So maybe these issues don't occur if you just use iPhoto? Who knows....
    I'm still trying to decide whether the A200 is the camera for me.
    Cheers,
    Stuart

Maybe you are looking for