Profiles are in red

Hi,
I install the Content Server and I migrate the configuration from other server using the Configuration Migration Utility. I export all the configuration with CMU. Also I set Overwrite Dupplicates. I also do a full import of content with Archiver.
When I go to Administration -> Admin Applet -> Configuration I see that profiles are in red and the New Web Asset is empty.
How to do resolve the problem with profiles, because if I fix this all other will be fixed, because they are linked.

Profiles work from a "trigger" metdata field that typically uses schema values. CMU exports the metadata and schema for the trigger field but it does not export the values. The profiles are listed in red because your schema values are missing. Use Archiver to export the values (it calls them "table data"). See my blog: http://webmonkeymagic.blogspot.com/2007/11/exporting-schema.html

Similar Messages

User Profiles are the wrong style after importing/migrating site collections from other SharePoint versions

I manage a couple of different version of SharePoint, which we are in the process of migrating to SharePoint 2013. I have a problem which I am not sure how to resolve. We are using MetaLogix to migrate site and site collection data from an older SharePoint
2007/WSS3.0 server environment into our new SharePoint 2013 environment and we are having a problem with user profiles that get created.
I have SharePoint 2013 set up for "SharePoint Profile Synchronization" and some of our user's profiles are being created in an older format that shows the user's claims account information, rather than the more fancy profile type that allows us
to include pictures and click on "follow this person" links.
If we manually delete the profile, it will be recreated properly however, as we are migrating many sites and collections over, it is near impossible to do this and keep track of each user so that their profiles can be deleted and recreated.
Is there some way to change this behavior so that SharePoint will only create the newer style of user profile?

These 'profiles' are you looking at them in the User Profile Service Application itself or are you looking at site collections? There is a huge difference between the two but people often miss it.
In most cases you'll have some partial information on the Site Collections but when you click through to their actual profile (not just their User Information List entry) you'll see the prettier version. That information is normally internally synchronised
by a timer job but that may not have run yet and/or the fact that your users haven't actually used the site may be causing it not to update them (it's an efficiency matter).
Finally: Drop your sales guy at Metalogix an email, they will bounce it to one of their techies and they'll have seen it a million times.

Server 2012 R2 RDS, User Profile Disks are created but local profiles are created as well. The UPDs aren't mounting correctly.

2012 R2 RDS Deployment with RDCB HA and UPDs enabled. Everything was working fine with no issues until users started getting temporary profiles. Around the same time UPDs were being created but at the same time a user profile was created in C:\Users.
I actually rebuilt the entire RDS configuration except the SQL Server. It took about 5 hours and was not that big a deal but.... we still have the same issue!
Does anybody have the solution for this?

Hi,
In most cases, the issue is caused by locked UPD. And the workaround is to log off the user. Please check if it is the case.
For example:
RDS user profile disks - getting error temporary profile are being used as UPD are not accessible
http://social.technet.microsoft.com/Forums/windowsserver/en-US/0d4b66fc-b53f-435e-b036-142b6ed15d0b/rds-user-profile-disks-getting-error-temporary-profile-are-being-used-as-upd-are-not-accesible?forum=winserverTS
Also, please check if you will get the temporary profile when logging on with a local account of the session host server.
If issue persists, please check if there is any related error in Event Viewer and provide us for further research.
Hope this helps.
Jeremy Wu
TechNet Community Support

When Soft Proofing in LR4 most of my loaded printer profiles are not visible

I am running LR4 and CS6 on an HP desktop with 4Gig Ram, Win 7 Home, Profiled Monitor using DataColor
In CS6, all my loaded ICC printer profiles appear when setting up the soft proofing...
In LR4, most of the profiles do not appear...
The problem is that I print to an Epson 7600 CMYK printer with UltraChrome Ink and mostly on Canvas so I need to proof for that environment.
The problem is that I print to an Epson 7600 CMYK printer with UltraChrome Ink and mostly on Canvas so I need to proof for that environment.
Photos of the two different pull downs are attached.

dmcrescent wrote:
Not sure what makes you think the Epson 7600 is a CMYK printer, but it isn't. You may be running a CMYK RIP attached to it, but the printer accepts RGB data, not CMYK. The only reason I can think of needing to profile in CMYK would be if you were using profiles generated for a press. I'm sure there may be others, but can't think of one off the top of my head.
Well you can send either RGB or CMYK to the printer but you have to first setup the proper driver for either. Unless you are proofing (make my Epson simulate a press sheet), I can’t think of any reason to send it CMYK data. The limitation is the driver in terms of what you send it. With a 3rd party driver (might be a RIP, might not) it can be possible to send CMYK data to the Epson. Epson bundles the ColorBurst product for this purpose (press simulation, use of CMYK profiles).
Since the Lightroom path is solely RGB, it can’t do anything with CMYK data. So the profiles are filtered out of the list. And don’t expect this to change anytime soon or ever. If CMYK is your game, well you need Photoshop or some other application to handle this data. And you’ll need another driver. So in context of this post, CMYK is simply not a possibility and that is why the profiles are not accessible.

Partner profile are not available.

Hi,
Iam doing file to idoc scenario. when i execute the scenario idoc is created with error 56 showing partenr profile are not avaialble. what will be the exact reason partenr profile in R/3 input parameter is added but still showing the error . Can anybody tel me soultion please.

Hi Aparna,
Please see this
The distribution model describes the ALE message flows between logical systems.
Use
You can specify the relationships between logical systems, message types, BAPIs and filters in the distribution model. Applications and the ALE layer use the model to determine receivers and to control the data distribution.
For more information about maintaining the distribution model see the Customizing Implementation Guide (IMG):
SAP Web Application Server
IDoc Interface/Application Link Enabling (ALE):
Modeling and Implementing Business Processes
Maintaining the Distribution Model
http://help.sap.com/saphelp_nw04/helpdata/en/0b/2a610f507d11d18ee90000e8366fc2/content.htm

After BI 7.0 Upgrade, Authorization Roles and profiles are not visible

Hi Gurus,
We have an issue with authorization roles and profiles are not visible for all end users with new Bex Analyzer (BI 7.0) tool. But still they can see these roles with old Bex Analyzer ( Bex 3.5) tool.
As a developer I have SAP_ALL acces and I can see all authorization roles in new BEx Analyzer (BI 7.0).
I verified in SU01 for user access and every are assigned there roles and they are green.
Do we need to add any new authorization object to fix this issue, please let me know
Thanks and appreciate your help.
Thanks
Ganesh Reddy.
Edited by: Ganesh Reddy on Oct 26, 2009 4:41 PM

Hi Ganesh,
check the behaviour, if you assign
S_USER_AGR
   ACT_GROUP = "..name of the assigned role.."
   ACTVT = 03 (for "display")
b.rgds,
Bernhard

How do i unistall last update on imac. my nikon files are turning red, how do i unistall last update on imac. my nikon files are turning red

my nef files are.turning red in apertutre since latest update. i understand i need to uninstall this . how do i uninstall

You can undo the RAW Compatibilty Update 4.08 without a time machine backup!
In Finder go to MacIntosh HD > Systems > Library > Core Services
In that folder delete the following:
RawCamera.bundle
RawCameraSupport.Bundle
Then download Digital Camera RAW Compatibility Update 4.07 from the Apple suport pages. Here's the direct link:
http://support.apple.com/kb/DL1666
The app store will then be telling you another update is available, meaning 4.08 which screwed us up in the frst place! Simply ignore the 4.08 update! Unless you are using one of the cameras listed as being added by 4.08:
     Canon EOS 70D
     Fujifilm X-M1
     Leica M
     Leica M Monochrom
     Nikon COOLPIX P330
     Pentax 645D
     Sony Cyber-shot DSC-RX1R
     Sony Cyber-shot DSC-RX100 II
By the way, I take no credit for this "solution" - I picked it up in another discussion thread on this subject.
However, I have been in voice contact with a Senior Support Specialist at Apple Care. The problem with Update 4.08 removing compatibilty for previously supported Nikon (and possibly other) files has been flagged to Apple's engineering.

Swaps are marked red in ST02

Swaps are banded red in ST02 how to come out of it. It is showing as below:
program                93,28   240.000      1.253       0,54    60.000     54.069      90,12 79.874 258.846
CUA                    98,93    12.000      1.466      14,62     6.000      5.417      90,28       0      593
Screen                 99,07    10.297      2.027      20,08     2.000      1.742      87,10     218    1.465
Calendar              100,00       488        367      76,78       200         50      25,00       0      150
OTR                   100,00     4.096      3.439     100,00     2.000      2.000     100,00       0
                                                                                0
Tables                                                                                0
Generic Key          99,86    51.297      2.005       4,02     5.000        285       5,70      49   35.406
Single record        89,43    18.000      5.092      28,52       500        432      86,40      42   78.837
                                                                                0
Export/import          75,56     8.000        899      12,24     2.000                        23.664
Exp./ Imp. SHM         94,04     4.096      3.248      94,45     2.000      1.999      99,95       0
How do you clear red bands, which memories play the role in this scenario?

You have to increase the parameters. Doubeclick on the red ones, press on "current parameters" and increase the given values using RZ10.
Your parameters, e. g. abap/buffersize are very small.
Markus

Camera profiles are gone after update of Camera Raw

Hi,
After an, automatic, update to camera raw 7.3 in Photoshop Elements 11 all Camera Profiles are gone. All that is left is "Matrix". Can someone please help me?
I use Elements 11, windows Vista on a 64-bit machine, my camera is a Nikon D7000.
Thanks!

Do you have Photoshop CS6 installed on same machine?
You can install the DNG converter from:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5519
This will restore all camera profiles on your machine

In PSE8 when using a selection took, unselected area turns red.

When using any of the selection tools, the unselected area turns red. How can I correct this?

Generally that just happens when using one of the Type Mask Tools or you get a red mask when using the Selection Brush Tool
in mask mode with Add to Selection enabled before starting the mask.
Could you post a screenshot?

Image Colour Profiles are not being applied

When I import images in to InDesign CC 2014 the embedded colour profiles are not being activated.
Therefore images are looking flat and a bit washed out on screen.
In order to apply the colour profile I have to right click on the image go down to Graphics and the colour settings and select the correct profile.
In the InDesign colour settings menu I have Colour management policies set to Preserve Embedded Profiles on RGB and Preserve Numbers (ignore linked Profiles) for CMYK. However changing these to other options makes no difference, the profile still need to be activated on each image.
I am working with RGB images that have the Adobe RGB 1998 profile embedded in them.
I cannot figure out why this is happening!??

Check your color settings.

After a UPSA connection edit, all my user profiles are "missing from import"

Hi there,
I've got a problem with my User Profile Service Application. I edited my existing connection to add some new OU containers to the list, after the networks team had done some
restructuring to reflect an organizational change. Then I ran a Full Synchronization. But now all of my user profiles show up under the "Missing from Import" list. I still have 943 profiles in SharePoint, and not surprisingly, people search isn't
working. I suspect that I did something wrong in the process of selecting the Users OU containers in the AD tree (in Populate Containers), but I cannot see what, since I replicated the selections that had been made for an unchanged department, to
the ones that had been reorganized.
Any help appreciated.
Tom
SharePoint Systems Officer, Capital Regional District, BC, Canada

Hi Tom ,
According to your description, my understanding is that all the user profiles are showing up under "Profiles missing from import" list after you edited the existing User Profile Synchronization
Connection.
For your issue, it can be caused by that your User Profile Synchronization Connection is unable to connect to your AD. Please make sure the account used to connect to Active Directory to import
profiles has access to the Organizational Unit you are importing from. By default this account is the Default Content Access account. And the Default Content Access account must be a domain user account and it must have read access to external or secure
content sources that you want to crawl by using this account.
Then you need to check if the “Profile Synchronization” job status is “succeed”.
Also please check the “Sync filter” for the service, and make sure the account are not include in the Exclusion Filter for Users.
For a workaround, you can just delete the existing connection , recreate it and perform a full synchronization.
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

Time machine timeline points are all red

Hi.
If I enter Time Machine all my timeline backups are red.
I noticed that my Time Machine drive wasn't displaying the correct icon after a recent start and I forced a back up. The icon came back and its been backing up since.
All recent backups are showing and I don't get any messages when it attempts to back up.
Why are they red?
Has a recent upgrade to Yosemite from Mavericks got anything to do with it?
Hope you can help..

Along the side are red.
I don't have obviously use Time Machine that much thankfully, just need to know its doing what it should be doing.
Didn't they used to be white?

Just got W 8.1 & IE 11. Have Lightroom 5.3 some of my printer profiles are gone on Epson 2880

I recently bought a new computer with Windows 8.1 & Internet Explorer 11. My Lightroom 5.3 printer paper & color space profiles are gone

John,
In the case of the R800, 3.0 has been around for about one year. However, 3.09 was first posted to Epson Europe on 29 October 07 and 6 November 07 to Epson Oceania (Australia and New Zealand). The driver is supposed to be fully compatible with Leopard, but I have no way of checking. According to both Europe and Oceania, drivers for the remaining R series printers (1800, 1900 and 2400) are due out later this month.

Netboot user profiles are not persitent after reboot

Hello,
we are migrated our environment to Mountain Lion Server and Netboot Clients also with Mountain Lion. User profiles are located on the Server.
If Users change some profile settings like default browser or standart application for opening files, these settings are persistent until the user reboot the machine. After that, all settings reverted to default. User permissions looks like it should. Also if some settings would be changed inside Safari proberties like search machine or startup page, these settings will be stay after the reboot. :-( Some other not.
Any sugestions where i have to look?
Thanks and regards.
Joris

Hey Brian,
we use Netboot ... yes but every User which is log in to the netboot client get an own Network Home Directory mapped.
I know that changes on the OS not stay persistant inside the Netboot OS. But changes on the UserProfiles, like default Browser or somthing else, are also reseted after the reboot. I think they should saved in the UserProfiles and stay persistant if the user log in again after the reboot?
Regards

Profiles are in red

Similar Messages

Maybe you are looking for