Profiles created with SU02 and transporting them

We have a lot of profiles that were created with SU02.
When I change them in our Development system and then create a transport and move the transport to our quality system and our production system the changes do not get updated.
I manually go to each system with SU02 and make the changes again and activate them.
Is there another way or am I missing something.
Thanks
Joe

Julius,
The TCD field isn't causing confusion. Look to the left at that Z:MC40 or whatever. That's the auth object, which has a field called TCD. In other words, there isn't S_TCODE with field TCD, there's this Z:MC40 or whatever, with field TCD and the tcode in that filed is MC40 or whatever.
Anyway, if I go through my data for S_TCODE, then I find that in the profile, it refers to the following. Note that these are the only two profiles in my UST10S table that refers to S_TCODE. I need to figure out how to reconstruct the rest of the profiles into roles so that the unlimited access in these profiles below can be removed and the balance of the profiles can be given relevant transactions.
X:TCODE        S_TCODE     &_SAP_ALL
X:TCODE             S_TCODE     S_TCD_ALL
X:TCODE             S_TCODE     S_TCD_ANW
X:TCODE             S_TCODE     S_TCD_BC
X:TCODE             S_TCODE     S_TCD_CUST
X:TCODE:ALL     S_TCODE     &_SAP_ALL
X:TCODE:ALL     S_TCODE     S_TCD_ALL
X:TCODE:ALL     S_TCODE     S_TCD_ANW
X:TCODE:ALL     S_TCODE     S_TCD_BC
X:TCODE:ALL     S_TCODE     S_TCD_CUST
Edited by: Santosh Krishnan on Jun 30, 2010 1:23 PM
Edited by: Santosh Krishnan on Jun 30, 2010 1:24 PM

Similar Messages

How to find which profiles created with SU02 have a specific company code

We just added another company code.
We have company code 10 & 20
We're trying to find out which profiles created with SU02 have company code 0010 or * for BUKRS
I know that you can get that information with SUIM for field text BUKRS and it will show you all the roles or I can browse table agr_1252,
But how do I get the same information for profiles created with SU02
I just want to make sure that users that have company code 0010 cannot access company code 0020 and vice versa
Thanks a lot in advance, this will be very helpful for me
Thanks again
Joe

Hello Joe,
Solution is to be found in SUIM->Profiles by complex selection criteria. In the selectin screen uncheck the field 'Generated Profiles'
(t-code=S_BCE_68001409)
Total Questions: 58 (34 unresolved)
Please clean up your threads....
Thread locked as per forum rules.
b.rgds, Bernhard

I have created two related books in Lightroom 5 (Volumes 1 and 2) but my balance of page numbers is off. So I'd like to take some pages out of one book (complete with images) and paste them into the other. Is this possible?

I have created two related Blurb books in Lightroom 5 (Volumes 1 and 2) but my balance of page numbers is off. So I'd like to take some pages out of one book (complete with images) and paste them into the other. Is this possible?

Can you zip up a few of your GoPro images, upload them to dropbox.com and post a share link, here, so others can experiment with them, or do you mean this issue is global to all camera models?

Where to copy a paper profile created with Colormunki in PSE 8 on a Mac

Hello - I am using PSE 8 on a Mac running Snow leopard, version 10.6.2 with the latest updates. I have calibrated my monitor using Colormunki and profiled the Canon Photo Paper Plus for use on my Canon ip5300 printer. So far, so good. However, when I use the print dialogue menu, I do not find the ICC profile that I created for that paper in the drop down menu. Another forum question related to this suggested that one had to copy the profile to Library/Application Support/Adobe/Color/Profiles. However, I do not SEE a profiles folder in the Color folder, just folders called Proofing and Settings, neither of which have any content. Is it possible that this folder resides elsewhere (I have spent quite a bit of time poking about trying to find such a folder).
I have managed to get a quite good print using the following settingsm(in the Photoshop dialogue box):
- Color handling: Photoshop manages color
- Printer Profile: Working RGB - iMac D65.icc (this is the monitor profile created by Colormunki.
and in the Printer dialogue box:
- Color matching: Colorsync
- Quality and Media: Photo Paper Pro, High
However, having gone to the trouble to buy the Colormunki and profile the monitor and printer/paper, I would reallly like to be able to use the profiles!
Cindy

I have, fortunately, managed to fix the problem on my own. As I mentioned previously, in another question, someone had suggested copying the Printer profile created using Colormunki to the Library/Application Support/Adobe/Color/Profiles folder from the Colorsync folder. When I went to do so, there WAS no Profiles folder! However, I checked my laptop and the folder WAS there, so I copied it to my iMac and then copied the desired printer profile to the now existing folder. Voila! I can now access my Colormunki profiles from PSE 8! Hope this is of help to others.

My website created with Iweb and hosted on mobileMe is not showing well on all computers. What could be the problem ?

My website created with Iweb and hosted on mobileMe is not uploading well on all computers. What could be the problem ?

I got a chance to look at it on a PC. Totally hosed up. It loads incorrectly then parts of it go blank.
I have a site that is based very much on one of the built-in templates and it works fine on the same PC. It contains only text boxes, image placeholders, and images with "picture frame" borders. Nothing fancy, no overlays, no extra code or anything. I haven't looked much at the other templates so I don't know if yours is mostly a template or how much you may have modified one or what tricks you may have done to get the look you wanted. Whatever it is, IE does not like it. Unfortunately, you can't really ignore them as was suggested; they make up a large part of your audience.

STO with WM with shipping and transportation process

Hi ,
Can anyone explain the process STO with WM with shipping and transportation?. What are all the config needs to be done for shipping and transportation?
Regards,
abi

<STO with shipping>
[1]
Please set shipping data for the receiving plant and supplying plant.
img -> mm -> purchasing -> PO -> set up stock transfer order -> define shipping data for plant.
receiving plant <> ship to party
supplying plant <> sales area.
[2]
Please assign delivery type and checking rule.
img -> mm -> purchasing -> PO -> set up stock transfer order -> assign delivery type and checking rule.
[3]
Maintain shipping point determination:
[4]
Maintain and assign confirmation control key (if you are using two step STO and want to post GR via inbound delivery).
This is the same as normal PO.
==========================================================
WM and transportation.
This is basically the same as normail WM and transportation.
Once outbound delivery (replenishment delivery) is created, the process is the same as normal outbound delivery.

How to create mass users and map them to existing hrms users

Hi,
Im running oracle ebusiness suite 12i . I want to create mass users , and map them to existing hrms users.
The users I want to create exist in an excel spreadsheet with the columns employee id, user name. They will all be granted the same responsibility. I want to map them to existing hrms users using the employee id key.
I have read about the package FND_USER_PKG.CREATEUSER and I can loop over it by using sql loader to create a temporary table, but I m lost on how to automatically map them to hrms users as part of the script.
Any help.
dula

Thanks a lot Omka,
I managed to create the users by running the script:
declare
Cursor C1 is
select d.product_code,b.responsibility_key from FND_USER_RESP_GROUPS_ALL a,fnd_responsibility b,fnd_user c,fnd_application d
where a.user_id = c.user_id
and a.responsibility_id = b.responsibility_id
and b.application_id = d.application_id
and c.user_name ='JOCHIENG';
Cursor employee is
SELECT EMPLOYEE_ID,EMPLOYEE_NAME from eldoret_final;
BEGIN
for e in employee loop
fnd_user_pkg.createuser
x_user_name => e.EMPLOYEE_NAME
*,x_owner => ''*
*,x_unencrypted_password => 'welcome123'*
*,x_start_date => SYSDATE - 10*
*,x_end_date => NULL*
*,x_description => 'CBK Employee'*
*,X_EMPLOYEE_ID => e.EMPLOYEE_ID*
fnd_user_pkg.addresp(upper (e.EMPLOYEE_NAME),'PER', 'CBK_EMPLOYEE_DIRECT_ACCESS','STANDARD', 'DESCRIPTION', sysdate, null);
end loop;
commit;
end;
I had first created the user JOCHIENG and assigned it the responsibility for Self service. So the script just assigns the responsibilities by copying from the one assgined to this user.
Everything seems ok. However, when trying to log in as the new user, the login error: Login failed. Please verify your login information or contact the system administrator.
is returned. But I can reset the password using the forms under Security > Define. Even with the correct password, the login doesn't go through.
Any idea?
dula

Services created with WSADMIN and SOAMANAGER

Hello gurus!
Ihave a question about the WS created in the transaction SOAMANAGER. we have 5 webservices to operate our system, 4 of them were created with WSADMIN and one with SOAMANAGER. The problem is that in EPP we only can download the WSDL of the WS created in SOAMANAGER, and the other four cannot be found. Do we need to re-create them in SOAMANAGER in order to get them in EPP??
Regards IA

Hello,
For old Web service definitions, if you have created End Points using WSCONFIG, you do not need to recreate it in SOAMANAGER. In WSADMIN, once you place cursor on your service, you can download WSDL using WSDL icon in Application Tool bar.
Thanks,
Venu

Create handling units and assigning them as Packing Proposal for Sales Orde

Hi Friends
How to create handling units and assigning them as Packing Proposal for Sales Order Items in the background.
Could you please help to provide Input Parameters for BAPI_HU_CREATE for sales order OR is there any other program creating and assigning them to Sales Order line Items.
Thanks in Advance.
SR

Hi Friends
I created Handling Units with BAPI_HU_CREATE , Pack materials with BAPI_HU_PACK in to Handling Untis and assign handling units to sales order with BAPI_HU_CHANGE_HEADER . But These BAPIs are not doing packing sales order line items in to handling units . I have to go sales order and do sales order line item packing by clicking packing button.
Could you please help on how to do packing Sales Order Line items in the background with BAPIs.
Thanks in Advance.
SR

How do I delete sites created with iWeb and posted with .mac after a format

I am confused about how to delete a couple of sites that I created with iWeb and posted with my .mac after I did a format reload?
I have tried everything. The original files are not on my MacBook Pro because of the format.
I also see them in my idisc, but I is my understanding that on my MacBook Pro that I can delete the files, but they are hosted online. On the online idisk I cannot delete them because there is no option. Please help!!!

Using the file menu in Finder:
Go/iDisk/My iDisk/Web/Sites/iWeb/YourSitesAreHere
Highlight selected files and Command/Delete. You will receive a drop down asking you if you are sure; click OK and the files/sites will be deleted immediately from the iDisk.
Mark

What Are The Minimum Permissions In Order An User To Be Able To Access User Profile Data With JavaScript And REST API

The question says it all:
What Are The Minimum Permissions In Order An User To Be Able To Access User Profile Data With JavaScript And REST API.?
In the User Profile -> Permissions there is only the option for "Full Control".

Hi Nikolay,
Thanks for posting your issue, you need to set permissions on User Profiles = Read. Kindly find the below mentioned URLs to get the code and more details on this.
http://www.vrdmn.com/2013/02/sharepoint-2013-working-with-user.html
http://www.vrdmn.com/2013/07/sharepoint-2013-get-userprofile.html
http://sharepoint.stackexchange.com/questions/61714/sharepoint-2013-call-the-rest-api-from-sharepoint-hosted-app
http://www.dotnetmafia.com/blogs/dotnettipoftheday/archive/2013/04/09/how-to-query-sharepoint-2013-using-rest-and-javascript.aspx
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

How to create RFQ s and use them to complete the program

hi,
how to create RFQ s and use them to complete the program
thanks in advance

Hi Santosh,
RFQ is created through transaction ME41.
You need to write down BDC for mass update of RFQ, because BAPI is not available.
Regards,
Tutun

When I send an email with attachments and open them on my ipad some of them open but others do not

When I send an email with attachments and open them on my ipad some of them open but others do not

What are the types that won't open?
Do you have an App that can open those types of files?

HT1338 I can create bookmarks folders and populate them. but when i quit safari the folders disappear?

I can create bookmarks folders and populate them. but when i quit safari the folders disappear?
Please help

Hi Nick ...
Try deleting the cache and reset ...
From your Safari menu bar click Safari > Empty Cache
If that doesn't help, back to the menu bar, click Safari > Reset Safari. Select the top 5 boxes, click Reset.
If that didn't help, try troubleshooting the Safari .plist (preferences)
Quit Safari.
Go to ~/Library/Preferences
Move the com.apple.Safari.plist file from the Preferences folder to the Desktop.
Relaunch Safari.
If it's working ok now, move that .plist file to the Trash. If not, move it back to the Preferences folder.
If you have trouble finding those files, open the Finder. From the Finder menu bar top of your screen, click Go > Go to Folder
Type this exactly as you see it here: ~/Library/Preferences
Click Go

Create a Z-table and fill it with value and transport everything

Hi
I would like to create a Z-table, fill it with values and then transport everything.
This table will not be updated in the productions system.
Delivery class = C Customizing table, maintenance only by cust., not SAP import
Data Browser/table view maint = Display/maintenance allowed
Field: MANDT, etc. etc.
Technical settings: Data class = APPL1, Size = 0, Buffering switched on, Fully buffered.
I also create the Table maintenance generator
When I fill my table with values, these will not be saved in my change request.
What I'm doing wrong?
Thanks // Peter B

Go to
se11>utilities>table maintenance generator-->there u fill
Fungroup group (inthe function group u give any a z name related to ur table name it create automatically)
package
maintenance screen type and screen name
After this save and activate.
Then goto
Utilities>TABLE CONTENTS>CREATE ENTERIES

Profiles created with SU02 and transporting them

Similar Messages

Maybe you are looking for