Profiles for Roles showing as not generated

My newly created roles show that their profile versions are not generated although the authorizations tab in PFCG is green and the authorization profile status states that it is generated. No errors were encountered when the role was generated. Older role profiles are OK.
Any thoughts or suggestions would be greatly appreciated! Thank you in advance!
Rose Schirmacher

My results were the same if generated in Display Authorization Data instead of Change Authorization Data.
Thoughts?

Similar Messages

The factory profile for this display could not be found

Just received a new (mid-2012) macbook air (13"). Started it up from time machine from my old macbook pro.
The new screen seemed a bit blue so I thought I'd calibrate the display. But I don't seem to be able to. I don't get the Display Calibrator Assistant. I just get 'The factory profile for this display could not be found'. Please help if you can?

Thanks for the feedback.
With Pacifist, a search should show everything in a separate search results window. That feature might only be available in the paid mode. If you're reinstalling once a month, you might reconsider how you're using the machine. If you made frequent bootable backups/clones to an ext FireWire HD and also did a Time Machine backup to another disk/volume/partition, you'd probably minimize doing that. I haven't done an A&I installation but once the past six years. That doesn't include purposeful ones done while beta-testing Panther, Tiger, and Leopard.
See these for other tips on keeping your installation flawless:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Myths of required versus not required maintenance for Mac OS X,
Macintosh OS X Routine Maintenance
Essential Mac Maintenance: Get set up
Essential Mac Maintenance: Rev up your routines,
Speeding up, and
Maintaining OS X for information.

A valid provisioning profile for this executable was not found

I have built an enterprise APP. It has been installed in hundreds of machine. It can run smoothly at the begining. After two months, a few of the machice cannot open the APP anymore. I have tried to read its crach log and it has nothing. Finally, i found out the reason by tracing the console log.
The error is "A valid provisioning profile for this executable was not found".
So I check if the file exist but it is disappeared. The user have not removed the profile.
At last, I tried to install the profile again, it is still not working even the profile is installed. Is there anyone who have the same issue? Thank you very much
Message was edited by: Ben125

Sorry that I have made a mistake. A wrong profile is installed.
Thanks

The factory profile for the display could not be found.

Whenever I try to color calibrate my Mid 2010 iMac I get the error message "The factory profile for the display could not be found". When you look at the profile settings for the display a color sync profile is set, but the setting for the factory profile is blank. I know where the color sync profiles are stored but it seems to me that the display has lost the setting to the factory profile. Can anyone tell me what the default factory profile setting should be? and how do you restore the setting? (note: I seem to have all the ICC files, it's the default factory setting itself that is missing)

There seems to be a lot of posts about this issue dotted around the net with no-one able to come up with a solution. So I found a solution myself! =P
1) Download a copy of Plistedit Pro. It's shareware, so donate!
2) Edit /Library/Preferences/.GlobalPreferences.plist (you will need to create a copy of the file, edit the copy and then copy back)
Using the plist editor find the coloursync entry for your device and simply edit the factory default entry to point to a valid colorsync profile file (.icc).
I can now colour calibrate my iMac again. Phew!!!

HT4060 My USB charger is not supporting while i am connecting from PC to iPad for charging (showing as " Not Charging"), Kindly advice me

My USB charger is not supporting while i am connecting from PC to iPad for charging (showing as " Not Charging"), Kindly advice me

Hi Folks,
I have tried most of what have been said here ( thank you for the great Job) but unforunatally it didn't solve the issue.
However, now the "Not Charging" message in the right corner disappeared and my iPad is charging normally from my laptop.
The reason behind that is using the USB3.0 port in my Dell inspiron N5110. Earlier, I was using the USB 2.0 ports and that is why it was showing that message but as sooon as I pluged it in the eSATA USB 3.0 port , the message disapeared and the iPad started charging normally.
So don't waste ur time here and there try to plug it to USB 3.0 port and it will works, Insha ALLAH.
Cheers
KoRn

Profile for Tokina 12-24mm not correcting distortion as expected

I just created a profile for my Tokina 12-24mm f4 on Nikon D300. I did 9 shots at each of the 5 marked zoom levels (f/8 for all). Testing the profile in Lightroom 3, it doesn't appear to be doing much distortion correction on shots done at 12mm, and virtually none for shots done at 16mm. Looking at the individual "corner shots" there isn't much curvature to the lines of squares, but plenty of taper towards the center.
Should I have told LPC this was a Fisheye Lens? Or do the corrections just not do very much correction?
- Bob

I just eyeballed the grid chart at 12mm with it set to fill the frame (less than a foot away) and there's no perceptable curvature. Actually that lens is pretty stinkin' good. I realized what I was dealing with was the effect of physical distance when super-wide, and very close to the subject. If part of the subject is, say, 1 foot away, and another part is 2 feet away, that second part is going to be half the size. So really perspective distortion, not curvature.
In other words - never mind
Almost don't need a profile for this lens. Except - as you say - for vignetting, and maybe some ca.
- Bob

UML modeling for class diagrams, could not generate code for modified diagr

Hi,
I'm using Java studio Enterprise for creating class diagrams and generating code from the UML using round trip engineering. I'm able to create class diagrams and generate code from the diagram. I tried modifying java code for classes and saved it. Now if I try and modify the diagram its not updating the java code associated with it.
Please suggest the workaround or so.
Thanks
Sunita

Maybe the linkage between the source and model class element is broken. Try to expand the class element from the project tree to see if a source file artifact node (under the class that displays the pathname as the name of the node). If not, that's why. Then, the workaround is to manually add the pathname to the java source file. Here are the steps:
- expand the class in question
- select the source file artifact node
- from the properties window on the right side of the ide, enter the exact pathname to the java source file and press the Enter
It should work now.

Device Central Profile for iPhope 4.. not seem to find where to get it!

Hey,
I've done some search and for something that should be strait forward I can't find a profile for the new iPhone. Can someone direct me to the right place please?
Also, is the Device Central the best way to do app testing apart from publishing the app to the actual device?
Thanks,
Dani

Its not the best way, but still you can check your output from there. Because for example you can't able to check the accelerometer output in the standard flash players instead you can test it there in the device central. Also like touch events and other events only supported in the mobile able to test it there. So it always useful but its not the best way, the output differs from the direct device sometimes.

Screen "Define Status Profile for User Status" should not open in changemod

Dear all ,
After following the path CRM>SPRO>SAP IMG -->Customer Relationship Management -->Transactions -->Basic Settings --> Status Management -->Define Status Profile for User Status.
the screen opens in change mode & allows user to carry out the changes, this is very crucial screen & hnece should not be in open mode ,kindly advice on closing the same.so that it opens only in display mode for production system.
Regards

Hi Milind,
To Block changes to any Object their is a Provision for the same in Client Deatils Screen
Go to TCode:SCC4
Check the Tab Cross-Client Object Changes
Try setting the Option (3.No Changes To Cross-Client Customization Objs)
Following Options Symbolises:
Changes to the Repository and cross-client Customizing permitted
There are no restrictions on the maintenance of cross-client objects for the client when this setting is used. Both cross-client Customizing objects and objects of the SAP Repository can be maintained.
No change to cross-client Customizing objects
Cross-client Customizing objects cannot be maintained in the client with this setting.
No change to Repository objects
With this setting, objects of the SAP Repository cannot be maintained in the client.
No change to Repository and cross-client Customizing objects
Combination of both restrictions: Neither cross-client Customizing objects nor objects of the SAP Repository can be maintained in the client.
(Choose This One it Should Resolve your Problem)
Hope it answered Your Queries..
Thanks and Regards,
RK.

Customer refund paid using F110 for which check is not generated

Hi,
A customer refund is paid using the transaction F110. Payment document got generated and successfully posted. But the check number is not allotted for that document and checks are not printed. In the same payment run payment is made to the vendors for which checks got generated. I had checked customer master data and payment method settings and not able to figure out what is the exact reason.
Please respond
Regards
Srinivas

Hi,
System thinks Check should be issued to vendors and collected from customer so check creation refer to the field LFA1-LIFNR, name written here is used for Check creation. Does customer name lie in to LFA1-LIFNR. This is the reason check issued for customer is not created. If you want then get the check printing form analyzed by an ABAPer to modify, if any.
Regards,
Chintan Joshi.

On commit for mview refresh is not generated in DDL

New design > relational > new table w/ single numeric column
New Oracle 11g physical > new materialized view > on prebuilt table from above > Refresh Clause tab > select ON COMMIT action
-- add a body for grins
resulting XML in saved design:
<?xml version = '1.0' encoding = 'UTF-8'?>
<SnapshotOraclev11g class="oracle.dbtools.crest.model.design.storage.oracle.v11g.SnapshotOraclev11g" name="TABLE_1" id="E092B588-B0A8-437A-4187-9999090405D9" directorySegmentName="seg_0">
<createdBy>kdavis1</createdBy>
<createdTime>2012-07-18 15:28:57 UTC</createdTime>
<ownerDesignName>OTN_Issue_20120717a</ownerDesignName>
<action>ON COMMIT</action>
<defaultSegment>NO</defaultSegment>
<onPrebuiltTable>8332B16F-E06B-86AC-E123-DDA4F5DFF794</onPrebuiltTable>
</SnapshotOraclev11g>
Resulting DDL lacks ON COMMIT:
-- Generated by Oracle SQL Developer Data Modeler 3.1.1.703
-- at: 2012-07-18 11:47:26 EDT
-- site: Oracle Database 11g
-- type: Oracle Database 11g
CREATE TABLE "TABLE_1"
"Column_1" NUMBER
LOGGING
CREATE MATERIALIZED VIEW "TABLE_1"
ON PREBUILT TABLE
AS select sum(foo) from bar
-- Oracle SQL Developer Data Modeler Summary Report:
-- CREATE TABLE 1
-- CREATE INDEX 0
-- ALTER TABLE 0
-- CREATE VIEW 0
-- CREATE PACKAGE 0
-- CREATE PACKAGE BODY 0
-- CREATE PROCEDURE 0
-- CREATE FUNCTION 0
-- CREATE TRIGGER 0
-- ALTER TRIGGER 0
-- CREATE STRUCTURED TYPE 0
-- CREATE COLLECTION TYPE 0
-- CREATE CLUSTER 0
-- CREATE CONTEXT 0
-- CREATE DATABASE 0
-- CREATE DIMENSION 0
-- CREATE DIRECTORY 0
-- CREATE DISK GROUP 0
-- CREATE ROLE 0
-- CREATE ROLLBACK SEGMENT 0
-- CREATE SEQUENCE 0
-- CREATE MATERIALIZED VIEW 1
-- CREATE SYNONYM 0
-- CREATE TABLESPACE 0
-- CREATE USER 0
-- DROP TABLESPACE 0
-- DROP DATABASE 0
-- ERRORS 0
-- WARNINGS 0
Posts reviewed: (materialized && view) || mview || mv

Yes but then shouldn't "Refresh Type" be blank (instead of FAST) like "Refresh Action" is blank by default.
Or better yet, you already fill the mview name upon selection of a table for on prebuilt -- so should you select refresh YES upon choosing a type and/or action?
Seems to be an inconsistency here.

"PRC: Generate Asset Lines for a single project" not generating certain asset lines

Hi,
There are certain invoice lines for which the PA_ADDITION_FLAG is Y in AP_INVOICE_DISTRIBUTIONS_ALL.
However, on running the "PRC: Generate Asset Lines for a single project" the same are line amounts are not getting Generated, and are not being shown under Rejected Lines in the output file aswell.
Can someone sugges what might be the issue?

What is your PA Thru n FA Dates?
PA date should be period end and FA date should be month end.........and also check CIP Interface amounts on Capitalization form..
Regards
Ragahvender K

Second button on menu for slide show does not work.

Anyone else having problems with this? Despite three separate attempts using different photos, different Macs and different themes... it is always the second button (to access the second folder) in the slide show that does not work. It fails to access the slides in the folder.
Our conclusion finally was that this is a bug, so we used only text buttons and put the second button over to the side of the main menu with just a period in it, and one image in the folder (it will not allow a folder without any images) and then we can skip from the first button to the third (seen on the screen as the second button) and bypass the problem.
Has anyone come up with an explanation or a better solution?

Anyone else having problems with this? Despite three separate attempts using different photos, different Macs and different themes... it is always the second button (to access the second folder) in the slide show that does not work. It fails to access the slides in the folder.
Our conclusion finally was that this is a bug, so we used only text buttons and put the second button over to the side of the main menu with just a period in it, and one image in the folder (it will not allow a folder without any images) and then we can skip from the first button to the third (seen on the screen as the second button) and bypass the problem.
Has anyone come up with an explanation or a better solution?

Separate email profiles for EDGE and WiFi, not keeping

I have tried to set up separate profiles as suggested in another thread so that I can send email whether on WiFi or EDGE.
After setting up the profiles and making sure that everything is set up properly,
I go to the home screen, then into mail. I then see that I have two email profiles named the same even though I named them differently.
When I go back to mail settings, both profiles have now been changed so that they now have identical information.
Any ideas about what's going on here?

No. I did the sync the first time and then created the additional account on the iPhone as you suggested.
Just tried it again. After creating the new account, I did a reset via the home and sleep keys.
When I got back in, both accounts had exactly the same info as each other in them. NOT the way I created them.

IDoc posted in R/3 but data for Date field has not generated.

Hi Experts
This is JDBC to IDoc scenarion.
Source: MS SQL Server
Date Data Type: smalldatetime
Date field Format: yyyy-MM-dd hh:mm:ss --> example: 2009-11-13 00:00:00
XI Mapping: Source Date --> Transformation --> Target Date
Transformation: yyyy-MM-dd hh:mm:ss to yyyyMMdd
Target: R/3 System
Date Data Type: ERDAT from VBAK table - Date on Which Record Was Created
Date field Format: Date field (YYYYMMDD) stored as char(8)
Check points:
1. Mapping is working fine in XI and transformation is done with the test data: 2009-11-13 00:00:00 --> to ---> 20091113
2. In SXMB_MONI the data is processed from the source and the IDoc XML data is generated. In the IDoc XML data the date field is containing the value <DATE>20091113</DATE>
3. But when I tried to open the IDoc(SE05) in R/3 the date field is empty and no data is generated.
Request you to let me know why the error is happening.
Regards
Ram

Hi Ram,
First try to test the same IDOC generated in ECC Box by populating date field value using WE19 and test .
Or
Instead of passing date value from SQL Server, Just give a try with Current Date function in Mapping and test in ECC system.
then we can think on further analysis.
Regards,
Vijay

Profiles for Roles showing as not generated

Similar Messages

Maybe you are looking for