Profiles in BPS

Hi all,
I want to create two profiles. A profile accedes to a layout with a certain value of version. And other profile accedes to other layout with other certain value of version.
Where do I create the profiles? And What do I introduce in the profile?
Thank you.

Hello Katixa,
Please follow the following stnadard procedure to create the profile and assign the corresponding layouts to the profile.
-->Navigate to ‘Planning profile’ in the planning workbench and select ‘Create’ from
     the menu to create profile with some name.
--> Check the option ‘Add to profile with all subordinate objects’
--> Select your area  from the planning areas and add to the profile.
--> Set profile by either double clicking or selecting ‘Set’ from the context menu or
      top menu bar – Profile-Set for the name of the profiel you gave in the step 1.  
--> . To assign profile to others, select ‘Assign profile to other users’ either from   
       the context menu or from the top menu bar Profile-Assign to other users.
--> Select ‘Planning’ and check that you can see only your planning objects.
-->To view all planning areas, select Edit-General Overview.

Similar Messages

  • Issues in retrieving the Planning profiles in CRM from BW while doing CRM-BI Integration

    Dear Folks,
    We are in the process of doing the SAP CRM & BI Integration wrt Trade Promotion Mangement.
    For testing purposes, we tried to create a planning profile in BPS end i.e BW SEM system & trying to retrieve it from the CRM system using the below navigation.
    SPRO-->CRM--> Define Transaction types--> ZBPD is the transaction type we had created.
    And in Customizing Header level, in SEM Planning tab, trying to retrieve the Planning profile created in SAP SEM-BW.
    Tried to search in both ways i.e prefixing the 'zprofile' with /prf/zprofile but still CRM system is not reading the same from BW system.
    What ever the pre-requisites that are needed to be followed before doing all these, the same had been done in terms of creating the RFC Connections etc but still unable to retrieve the same.
    And also not finding any standard content in the form of Planning areas & profiles at BW end after installing the SEM BW component add on in BW system.
    Could you pls let us know what we are missing here.
    Thanks in advance.

    I meet the same problem, any solution?

  • Missing Actions in Sales assistant of MSA

    Hi Gurus,
    We defined sales cycle, phases (4 phases) and assigned these to an opportunity transaction type. We assigned actions to these phases.
    In SAP GUI, we are able to see all the actions assigned for a phase but in MSA we are only able to see the actions that are assigned to the first phase of the sales cycle. For the remaining phases we are not able to see the assigned actions.
    Please help.
    Thanks.

    Hi Wolfhard,
    I synchronized the objects from CRM to CDB and then extracted details for the entire site. But the issue persists
    Following are the subscriptions for the site:
    Activities (by Employee)
    Activity Journal Customizing
    Activity Recurrence
    Adapter Test Publication (bulk)
    Allocations & Target Group Header
    Authorization 1 subscription
    Authorization 2 subscription
    Authorization subscription
    Business Content Provider
    Business transaction customizing subscription
    Classification subscription
    Client Registry
    Connection Handler
    Customer & Competitor Agreement Prio.
    Customer & Prospects (by Partner Number Range)
    Customer Hierarchy subscription
    Customizing  Objects (Mobile Sales specific) subscription
    Customizing Account Panning 01
    Customizing BP Hierarchies 01
    Customizing Listing
    Customizing Mobile Sales specific from R/3 subscription
    Customizing Objects 4.0 ECE
    Customizing Objects 40 SP2 subscription
    Customizing Objects 40 subscription
    Customizing Objects 50
    Customizing Objects II subscription
    Customizing Objects III subscription
    Customizing Objects IV
    Customizing Objects subscription
    Customizing ORGMAN  subscription
    Customizing Project Object
    Customizing Standard Text
    Customizing Survey Tool
    Customizing Tour Planning
    Customizing V
    Customizing_Objects_PPR
    Customizing_TTE subscription
    Employee Hierarchy
    Employee subscription
    Inbox Mapping subscription
    Key Account Management
    Layout Field Template
    Marketing Attribute Template
    Marketing Organisation
    Marketing profiles by BPs
    Marketing profiles values by BPs
    Opportunities (by Employee SG)
    Partner Group Hierarchy
    Product Customizing
    Products (by Product Type 01)
    Products (by Product Type 02)
    Products (by Product Type 03)
    Products (by Product Type 04)
    Products (by Product Type 05)
    Products (by Product Type 07)
    Promotions & Campaigns (by Object Type CAM)
    Selections & Reports
    Territories (bulk)
    Territory Hierarchy (bulk)
    User (by Employee) subscription
    Workbench (Language Independent)
    Please let me know if I missed any required subscription.
    Please help.
    Thanks.

  • Removing the mandatory mark for the postal code in add new ship to address

    Hello All,
    Is there any configurtatoin available to make the postalcode optional in add new ship to address page for a particular country?.
    What will be the bestway to do this?.
    Regards
    Shanto Aloor

    There is no single configuration to help you.
    See shiptodetails.jsp or shiptodetails1.jsp , the mandatory values are hard-wired and marked with "*" explicitly.  For removing the visual cue, you need to change the JSP.
    To suppress the CRM messages from showing in the web layer, see my message Re: Tax Jurisdiction In B2C Webshop (SAP CRM 7.0) as an optional field. and the messages therein.
    Even these two may not grantee the full requirement. The error message comes as a part of validating the address of the business partner. You can get different behaviors for different "profiles" of BPs. But that requires you to maintain the configuration at (Tcode SPRO)
    CRM--> Master Data --> Business Partner --> Define Profiles
    Hope this helps.

  • Read BPs from a filter of an Attribute Set.

    Hi SAP Gurus,
    We have a scenario: We have a PROFILE/Attribute List where one attribute is selected. That attribute has a filter criteria which  contains some BPs. We have to read those BPs within the filter and Assign the BPs to a target group. then we have to assign the target group to a campaign.
    1. Do we have any function modules to read BPs from the filter of the attribute list automatically?
    2. Do we have FMs to create a Campaign? we have found a FM 'MKT_ELEMENT_CREATE' which creates a Campaign element within a parent campaign. But we want to create a parent campaign itself. Do we have any FM for that?
    Thanks in Advance.

    Hi,
    You can use the methods in the class 'cl_crm_mktpl_appl_base' to create a campaign and assign target groups.
    the mehods used are : get instance to instantiate an object, 'element create' method followed by 'save method , BAPI_TRANSACTION_COMMIT to create the campaign and 'tggr_assign_create' followed by ''save' and 'bapi commit' to assign the target groups.
    Hope this helps!!!
    Prerna

  • Attached document for data column in BPS Web application

    Hi,
       I have created layout for a BPS application, the layout has been configured to have the ability to allow the used to create the attached documentd for the data column. when the user open the layout through the planning profile, the icon for those documents is displayed and can be open by click those icons. After we generated the Web applicatios, those icons are gone and the user can not open them any more.
      I notice that there is document subcomponent under BPS-WB, I added that subcomponent to my web layout, it still not work.Anybody know how to display the attached documents on the Web, Is this doable?

    Hi Marc,
       I did exactly what you mention in your responce e-mail, but it still not work coreectly.
    following is my propperty configuration for layout and documents:
    Planning layout (layout_lay01)
    Only ready for output: True
    Row/Cell Selection: Cell
    Event on selection: true
    Document on planning layout (Document1)
    Layout: = layout_lay01
    Only ready for output: false
    When I launch the application through the Tcode BPS_WIF0
    There is no document icon display for each data columns which can been in UPSPL. Instead there is a generic document input/display space under the lauout,however there is no any document display within the box, and I can not input anything within the document box. I changes some of the property for the layout and document, but it not work.
    Did I forget some thing?

  • Display names of BPs

    Hello gurus!
    Is there a way to change to display names of Business Partner names like this:
    first must be "Surname", second - "Name", without initials.
    Example.
    Now is displayed like this: Konstantin K. V. Melnik
    We want like this: Melnik Konstantin.
    cProjects 4.0 on CRM 5.0.
    BPs transfered from HR via ALE.
    Regards,
    Konstantin Melnik

    Hi Konstantin,
    I don't know if this affects the exibition of BP names in cProjects, but you may check out the following customization.
    - Transaction "BP"
    - Go to the "Address" tab in one of your Business Partners profile
    - In the "Name" field-group, there is a "Country for Format" field with the country-code of that Business Partners naming format
    - Put your cursor on it and press F1 to get the Help popup. There should be a generic description about that field.
    - Click on the link "name format rule key" in that description. There you should get a deeper explanation about name formats.
    - Check transaction SA13 to change the name format for that specific country-code and try if it works for cProjects also.
    Regards,

  • BW - BPS, CRM & some more queries

    Hi all
    I need some urgent help in following topics.
    1. What is the Role of BW BPS in a CRM Project
    2. What would be the percentage effort difference in terms of CRM / BW for a typical requirement.
    3. On the CRM Effort, what are the skills needed.
    4. What are the CRM - BPS integration skills needed.
    Thanking you in advance.
    Rachesh

    hi
    u have to configure planning profile in CRM system.
    SPRO>CRM>Account Planning-->-General Settings
    tx
    srin

  • BP search by role brings no hits although BPs exist...

    Hi All,
    This is a bit of a long message but please bear with it....
    We currently have a system issue that is causing duplicate BPs to be created.
    We have configured: Customer Relationship Management->Interaction Center WebClient->Master Data->Accounts->Define Account Identification Profiles
    to define the "Maximum number of hits that appear in the results list." (this is from the documentation provided in SPRO) to be 100 and in the filters we define a role we have setup for "Customers".
    What is actually being done in the system is that the the search goes off and searches the main business partner table (BUT000) and returns the first 100 entries it finds and It then trawls through the 100 hits and filter out those that are "Customers" and returns the hits to the screen.
    So, if we do a search for "Smith"  the search returns the first 100 hits (who are all Employees) and then filters this 100 for "Customers". This will return no hits as none of these have the Customer role against them.
    Therefore the user will just create a new customer of that name and this is why we are getting loads of duplicates in the system.
    It would be nice if we could ignore any BPs who's number starts with EM, as these are the employees imported from R/3 and cannot be used (as a customer) in our system due to Data Protection issues.
    I have raised an OSS for this and the answer is, basically, is to increase to max hits (which will have an impact on performance) or implement our own code as this is standard functionality.
    I am hoping others have came accross this issue and resolved the problem (I have searched the forums and not come accross anyone with the same though).
    Many thanks in advance
    Gary Hawkins

    Hi,
    Removing the Max hits has solved the problem.
    I think we need to implement our own logic to restrict the number of hits brought back to the Web IC, but the fix will stop us creating duplicates.
    Many thanks for your help
    Gary Hawkins
    Edited by: Gary Hawkins on Jul 31, 2008 4:07 PM

  • IP profile

    Can anyone please help me?
    My IP profile seems to be stuck on 2mbps
    I had a similar problem in August, and at that time I upgraded my home hub from 2 to 3 and my IP profile was reset.
    For a time I then achieved an IP profile of about 7mbps which is more consistent with the speed that my neighbours achieve.
    My hub is connected into the main socket which has a BT accelerator installed. (although I get the same test results with or without the accelerator).
    Test Results:
    Download speed achieved during the test was - 1.95 Mbps For your connection, the acceptable range of speeds is 0.4 Mbps-2 Mbps. Additional Information: Your DSL Connection Rate :8.13 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM) IP Profile for your line is - 2 Mbps
    Home Hub Data:
    ADSL Line Status
    Connection information
    Top of Form
    Line state:
    Connected
    Connection time:
    0 day, 22:09:14
    Downstream:
    8,128 Kbps
    Upstream:
    448 Kbps
    ADSL settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.1 Annex A
    Latency type:
    Fast
    Noise margin (Down/Up):
    10.6 dB / 25.0 dB
    Line attenuation (Down/Up):
    13.5 dB / 10.0 dB
    Output power (Down/Up):
    19.8 dBm / 11.9 dBm
    FEC Events (Down/Up):
    0 / 0
    CRC Events (Down/Up):
    22 / 1
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    Loss of Link (Remote):
    0
    HEC Errors (Down/Up):
    30 / 0
    Error Seconds (Local/Remote):
    0 / 0
    Solved!
    Go to Solution.

    Hi John,
    I've had almost 5 days of uninterupted connection now following last weekends power cuts.
    speed & hub data follows:
    Speed test information
    Download speed achieved during the test was - 1.94 Mbps
    For your connection, the acceptable range of speeds is 0.4 Mbps-2 bps.
    Additional Information:
    Your DSL Connection Rate :8.13 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
    IP Profile for your line is - 2 Mbps
    Hub information
    ADSL Line Status
    Connection information
    Top of Form
    Line state:
    Connected
    Connection time:
    4 days, 20:32:43
    Downstream:
    8,128 Kbps
    Upstream:
    448 Kbps
    ADSL settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.1 Annex A
    Latency type:
    Fast
    Noise margin   (Down/Up):
    9.9 dB / 25.0 dB
    Line attenuation   (Down/Up):
    13.5 dB / 10.0 dB
    Output power   (Down/Up):
    19.7 dBm / 11.9   dBm
    FEC Events   (Down/Up):
    0 / 0
    CRC Events   (Down/Up):
    199 / 0
    Loss of Framing   (Local/Remote):
    0 / 0
    Loss of Signal   (Local/Remote):
    0 / 0
    Loss of Power   (Local/Remote):
    0 / 0
    Loss of Link   (Remote):
    0
    HEC Errors   (Down/Up):
    159 / 0
    Error Seconds   (Local/Remote):
    0 / 0

  • Several BPs, implementing WS in one DP

    Hi all!
    I am using JCAPS 5.1.1 and unsuccessfully trying to deploy two
    business processes, which implement web services in one deployment
    profile.
    To do that I created a WSD, which defines one PortType with two
    operations. Then I created the BPs, implementing those operations.
    Next I created a connectivity map with one Web Service Application and
    I map PortTypes from implemented services of both BPS into this WS
    Application. When I create a DP and map everything to environment,
    build and deploy everything, it goes well. But when I try to access
    the web services, one of them works ok, but the other one always
    returns with the following error (envelope cut):
    <env:Body>
      <env:Fault>
        <faultcode>env:Server</faultcode>
        <faultstring>Internal server runtime exception</faultstring>
        <detail>
          <ans1:SOAPFaultMessage
    xmlns="http://seebeyond/com/xsddefined/FaultMessages"
    xmlns:ans1="http://seebeyond/com/xsddefined/FaultMessages">
            <ans1:Fault>
              <faultcode xmlns="">SERVER_ERROR</faultcode>
              <faultstring xmlns="">root
    cause:java.lang.IllegalStateException: Unexcepted null value, wsMsg is
    null and the associated Fault container is not available</faultstring>
              <faultactor xmlns="">wsserver</faultactor>
              <detail xmlns="">root cause:java.lang.IllegalStateException:
    Unexcepted null value, wsMsg is null and the associated Fault
    container is not available</detail>
            </ans1:Fault>
          </ans1:SOAPFaultMessage>
        </detail>
      </env:Fault>
    </env:Body>When deployed separately, both BPs work as expected. I also tried
    creating two CMs and deploying them in one DP, same effect.
    I feel like I am doing something stupid, because I really need both
    those BPs deployed as WS under one context and this just got to work...
    Any suggestions?
    Thanks in advance!

    If you want to implement two operations of a single web service, you have to implement these in a single business process. This single business process can then call your two business processes as sub-processes or you could put all the logic in the single business process.
    If you want to have two business processes deployed then each must implement a separate web service, otherwise they both try to deploy a servlet under the same URL and this will not work.
    To implement two operations of a single web service in a business process you must start the business process with an Event Based decision and each operation will be a different message event of the event based decision.
    Regards,
    Frederik

  • BPS CCA Retractor setup

    Hi All,
    I am new to BPS and and am trying to set up the functionality for Retraction of data from SEM to R/3.
    But when I go to the transaction (as mentioned in SAP Help)
    Business Analytics -> Financial Analytics -> Cost Center Planning -> Cost Center Planning Administration,
    I am not able to find the same.
    I am working on SEM-BW 4.0 and BI_CONT 3.5, is the same transaction replaced with the one mentioned below here
    Business Analytics -> Financial Analytics -> Cost Center Planning -> Customizing -> Settings in the Planning Environment
    Moreover if I try to go to Settings in the Planning Environment, it gives me the error message as below:
    Planning profile 4EXPPL01 does not exist
    Message no. UPC_FW050
    Can anybody suggest what am I missing. Thanks for your help in advance
    Anurag

    Hi,
    I could activate the Content using the option that you had suggested, but am still stuck up with the Retractor setup.
    I have done the steps as mentioned in SAP Help, but have not been able to retract data into R/3.
    Below are the steps that I did and the problem :
    1. Select one of the existing planning levels the selection of which contains data that you want to transfer back into the operational system, or create a suitable planning level.
    2. Create a planning function of the type “exit” in the context of the planning level you selected.
    3. Enter the names of the function modules in the fields intended for this:
    Function module = UPR_COST_PLAN_EXEC
    FM initialization = UPR_COST_PLAN_INIT
    4.  Make the assignments of parameters to data elements under Parameter Exit Functions:
    5. In the list of fields to be changed, selected the following characteristics:
    Cost center (0COSTCENTER)
    Cost element (0COSTELMNT)
    6. Create a parameter group for the planning function.
    7. In the parameter group, entered the parameters created in the context of the function.
    8. To start the retraction, select a package of the planning level and then execute the function with the parameter group.
    Once I execute the package I get the following message
    27 data records were read, 0 of them were changed, 0 generated
    Message no. UPC224
    Having done the above, I am not clear
    what are the steps to be executed subsequent to this, and if I need to create the sender structure where and how I could create the same.
    Moreover once the data is retracted into R/3 is it visible in transaction directly in KP06/KP07 or do I need to view the same in some other transaction/table or is there some processing step involved there also.
    Looking forward to your suggestions
    Regards
    Anurag

  • Hierarchy node variable in BPS planning level

    Hi gurus,
    I have a set of planning levels and packages that are meant for all users. The users currently are segregated by 0costcenter hierarchy nodes, i.e. groups of users are belonging to different nodes within the 0costcenter hierarchy. These group of users each have its respective authorisation profile assigned based on hierarchy node.
    The planning levels and packages are configured so that 0costcenter is one of the header characteristics in the layout.
    Is there a way for the characteristic 0costcenter in the planning level and packages to derive the cost centers from the authorisation profiles ?
    Advice appreciated.
    Thanks.

    You may consider any of the following:
    1. BPS variables with authorization replacement type.
    2. BPS variables with user defined values replacement type.
    Ravi Thothadri

  • Rfc call error bps

    Hi,
    I am getting this error when I am uploading file for bps.
    You have selected a function to execute this the system must set up an RFC Connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated
    "You do not have authorization for Infocube <infocubename>"
    please guide me which authorization is missing.

    Check if your profile contains S_RS_ICUBE authorization object with following settings for the cube in which you are trying to load the data:
    ACTVT          03
    RSICUBEOBJ     CHAVLREL, DATA, DATASLICE, DEFINITION, EXPORTISRC, UPDATERULE
    RSINFOAREA     *
    RSINFOCUBE     <Cube name>
    Or if your have any anyalsis authorizations created, go in RSECADMIN and check your analysis authorization object for below:
    0TCAACTVT  02, 03
    0TCAIPROV <Cube Name>
    TCAVALID *

  • How to planning profile using BPS0 tcode

    Hi all ,
    I have a question about BPS.
    In BW7.0 system, using bps0, I could't see those standard planning profiles, such as 4CRMMP02, 4CRMMP03, 4CRMMP04, 4CRMMP05, 4CRMMP06, 4CRMMP09.
    And I could't find planning profiles in BI Content.
    I want to know what problem it is. Whether need I install some add-on about BPS?
    Thank you for your reply in advance.
    After installing SEM BPS patch on BI server does the planning profile gets configured auto...
    or do we need to install from Bi content
    Can you help me solving above issue, i new to BPS
    Regards,
    Anjan

    Hi Jaya,
    Go to any Tcode.
    Then Go to System -> Status.
    There you can get the program of that transaction code in Program (screen).
    Hope this will help.
    Regards,
    Nitin.

Maybe you are looking for