Profiles in New Airport Express Base Station

How do I set profiles in the new Airport Express (802.11n) base station. I checked every tab in Airport Utility but couldn't find it.

The AirPort Express Base Station (AX) can store up to five different configuration profiles. You will need to use the AirPort Utility, located in Applications/Utilities to create & save these profiles.
To create a new profile:
o Open AirPort Utility, select your AX from the list, and then, click "Manual Setup."
o From the AirPort Utility menu, select "Base Station," and then "Manage Profiles."
o Click "+" to create a new profile; give it a name, and then, click OK.
o Set options, such as network name, passwords, Internet connection method, etc.
o When done setting the options, click Update.
To switch profiles:
o Open the AirPort Utility, select your AX from the list, and then, click "Manual Setup."
o From the AirPort Utility menu, select "Base Station," and then "Manage Profiles."
o Click on the desired profile, and then, click OK to apply the new profile and restart the AX.
Just remember to switch to the desired configuration profile before removing power from the AX.

Similar Messages

Can you add new AirPort Express Base Station Simultaneous dual-band 802.11n with a 1st Gen time capsule network

Hi
Has anyone tried using the AirPort Express Base Station with a first generation Time Capsule and used it to extend their network, while still being able to use the Simultaneous dual-band 802.11n on their network?
Thanks in advance

The first generation Time Capsule was not a simultaneous dual band device.
If you add the "new" AirPort Express to the network and configure it to "Extend a wireless network", it will extend the one single band signal that it is receiving from the Time Capsule.
In other words, the AirPort Express will not extend simultaneous dual bands in this type of setup...since it can only "extend" what it receives. You would need a simultaneous dual band Time Capsule if you want that type of functionality.

Brand new Airport Express (base Station)

I have an Airport Extreme hooked to a cable modem. This is my base AP.
I have an old Airport Express hooked to my HiFi only doing iTunes
I have an old Airport Express as a WDS remote. (And tied to an Epson printer.)
I have a MB and MBP.
Everything is great.
Now I plug in a brand new Airport Express with 802.11n. I ether set it up manually or via the Airport Utility 'manager'. No matter what I do it does not 'hook' up to my WiFi network. It is always flashing but I can never have it give me internet access.
BTW - I noticed that unlike the other boxes this one (AX-n) does not give the "Wireless Clients" graph in the log screen.

Hello Albert,
Go to: Utilities/Airport Utility then when you setup your new airport express, on wireless tab, check "802.11n (802.11 b/g compatible) and it should work. If you check 802.11n and your network is in g mode, it won't work. I have a dual network, Time capsule, 2 MBP, 2 MB and airport express iTune on 802.11n and another airport extreme with 2 airport express on 802.11n(b/g compatible) for iphone use. Every thing work seamlessly.
Good luck.

Can the new AirPort Express Base Stations be daisy-chained?

I have to create a wireless network over a considerably large space (an entire museum), and was previously under the impression that I could endlessly extend the signal from my AirPort Extreme using a series of AirPort Expresses. In fact, the Apple Store Business Team led me to believe this. I have purchased five Expresses (three of which are the new Base Stations, one is the slightly earlier version (801.11n), and one is older (801.11g).
I am now aware that I cannot simply "extend" the network more than once, and that with older models you had to use WDS to relay the network to remote AirPort Expresses. But can even this be done with the new base stations? Airport Utility 6.0 seems to provide much less functionality than the ealier versions. I still have one macbook with Airport 5.x, thankfully, although it still doesn't make it clear how to change the Express into a WDS relay.
I never would have bought these products if it was clear that you could only really extend the network by 50 feet in any direction. Hopefully, this isn't the case.
Thanks,
-mf

Thanks, Shawn, although I'd looked at that article before and I still have the same questions:
- It says "WDS is designed for 802.11g, and shouldn’t be used for 802.11n devices. Wi-Fi base stations may include AirPort Extreme (802.11g) and AirPort Express (802.11g)." Is this truly prohibitive, or just a suggestion?
- It also includes steps such as "From WDS Mode, select WDS remote." I see no such options in AirPort Utility 6.0, nor can I find them in version 5.6. Am I missing something, or do the hardware upgrades (to 'n') mean that Apple software won't support WDS at all anymore?
-Mike

Airport Express Base Station Setup problem

My new Airport Express Base Station (2nd generation) does not sense the internet using an ethernet cable. The status light is green. I am using a hotel's DSL system in Brazil. When using the same cable, and connecting my laptop directly to the system, it senses the internet just fine, so I know it isn't the cable or the hotel. Does anyone know of compatibility problems with this Airport model?

Does the DSL service require PPPoE for authentication before allowing you Internet access? If so, then the device directly connected to the DSL modem would need to be configured as such.

AirPort Express Base Station - Use with HP Laser Jet & Time Warner

Have this brand new AirPort Express Base Station that I want to install in place of the Linksys router that is connected to the Time Warner cable base station delivering internet connection so I can connect HP Laser Jet 6/6mp printer via USB on the AirPort Express. Any recommendations or suggestions ?

Thanks
The question is this
If I use the Airport Express Base Station as wireless router for internet service coming in from Time Warner AND plug the HP LaserJet printer USB plug into the AirportExpressBaseStation will I be able to overcome the communication problem I am having when I plug in the HPLP's USB plug directly into the MacBookPro and cannot get use of the printer due to language ( Apple Talk vs Post Script ) problems ? Probably not make any difference since the USB female on the AEBS is just a conductor !
While I have you ! How do Mac people delete backwards like PC people do when they press the delete key and letters delete from left to right ?

Problems setting up AirPort Express Base Station

I'm a real newbie at this, so pardon the ignorance in advance haha.
I just bought a new Airport Express base station. I wanted to be able to stream my music via iTunes to my living room. I'm just having problems getting the aiport utility to recognize the base station. I have the base station plugged in and everything. Right now it is flashing the amber light.
This is my set-up. I have a Netgear WGR614 54MBPS wireless G router connected to my broadband modem. From the router I have it connected to my desktop thats running windows xp pro. The network is up and running just fine. I can connect via any laptop or other device with wifi. Now, how do I get my wireless router to pick up the base station? Do I have to wrong idea here or something? haha. thanks in advance!

In the Airport Utility for your Airport Express, you should set the Airport Express in "client" mode. You might have to connect your Airport Express directly to your router with ethernet cable, while doing this. If you are using encryption, make sure that you enter the encryption number onto the express that your router/access point is using. Again, if you plug the Express directly into the router, you should be able to modify the settings quite easily. Once you unplug the express, it will blink orange for awhile (maybe a minute), so wait a bit.
Good luck.

Airport express base station....connecting?

i have a pc and have bought a new airport express base station, i have ordered a new imac G5 and really bought the router for it....but when i tried to set up the pc with the express base station i noticed the rj11 cable doesnt fit into the base station socket...it seems to be an ethernet socket (whatever that is I dunno) can ne 1 tell me what I need to go wireless..(perhaps a brain would help!!)my modem is a bt voyager 105 usb adsl ......help would be gratefully appreciated!!
bAz Belfast

With the Express, you'll either need a new modem that has an Ethernet port or you need to set up the PC's networking configuration to bridge the USB modem's network to the PC's Ethernet port and then connect the Express to the PC, which would require that the PC be stationary and booted whenever you wanted to access the Internet. I wouldn't have a clue how to accomplish the latter, but it should be doable and you should be able to find information online somewhere.

I have just purchased and installed a new Airport extreme base station but now the Airport Utility cannot see my old Airport Express. Are their compatibility issues and do I need to purchase a new Express?

I have just purchased and installed a new Airport extreme base station but now the Airport Utility cannot see my old Airport Express. Are their compatibility issues and do I need to purchase a new Express?

When you can, take a look at the old AirPort Express and locate the model number in the faint print on the side of the device.
If you see A1084 or A1088, this is an older Express version that is no longer supported by the current version of AirPort Utility that you are using with the new AirPort Extreme.
If that is the case, your Express is at least 6 years old...probably older...so it is about time to treat yourself to a new version with much faster speeds and more features.

Apple AirPort Express Base Station with 802.11n - MB321LL/A. How to set it up to my new iMac

Community:
How do you set up an
Apple AirPort Express Base Station with 802.11n - MB321LL/A how do you set up on Mac running on OS X 10.9.4?
Please advise
Fmsalazar

Apple did say it was important.
If the units do not show up in the airport utility then you must set it correctly to link-local.
Steps for OS X Lion or Mountain Lion
This can happen if IPv6 has been disabled. To enable IPv6 for your network interface:
Choose Apple menu () > System Preferences, and then click Network.
If a lock icon appears in the lower-left corner, click it and enter your admin name and password to unlock the pane.
Click your network service (Wi-Fi or Ethernet) in the list, and then click Advanced.
Click the TCP/IP tab.
Choose Link-local only from the Configure IPv6 pop-up menu.
Click OK.
Click Apply.
AirPort base station not seen or "An unexpected error occurred" appears in AirPort Utility 6.3
Apple rep says the same.
Re: Unexpected error when connecting Airport Express A1264 to Airport Utility 6.3.1
I am searching as I saw it in a thread today where a person had issues. (No contribution from me in the thread but found that was the issue).
It is kind of a fail safe.. since auto can end up with any setting.. and it will depend on the setting of ipv6 in the Airport Router if it works properly in the computer.. setting it to the correct value is one step in sorting out problems when people get in a mess.

Airport Express Base Station doesn't appear in AirPort Admin Utility list

Hi,
After applying the "Security Update 2007-003" I had the following problem and can't solve it:
Now I can't find anymore my Airport Express base station under the list of Base stations in Airport Admin Utility and am also having problems while printing wireless, if the printer goes to sleep mode he doesn't wake up automatically anymore to do the job, every time I have to close it and open it again.
I can't find a solution for this problem, please HELP!
Thanks,
Macuser

"it was downloaded by the software update"
No problem then. Apparently there WAS such an update, but I missed it and it's been deleted from the list of available downloads, as you can clearly see.
There is now a new "Security Update 2007-004" for Tiger, and I think it's safe to assume that this will help correct your problems.
If your problems still exist afterwards, you will want to reset the AirPort Express unit to factory settings and erase all current configuration profiles. Do that by holding in the reset button with a straightened paper clip while plugging the unit into a convenient electrical receptacle. Open the utility "AirPort Setup Assistant" and choose to "Set up a new AirPort Base Station" and proceed. After successful completion, unplug and relocate the AirPort Express to its usual location.

I have two airport express base stations that I want to configure on two separate sets of speakers in two separate rooms. How do I do this? Airport Utility only seems to scan one express at a time.

I am currently running a PowerPC G5 imac and have a wired broadband modem via ethernet with airport wireless network turned on, on the G5. I have the computer in the bedroom and have an airport express wired into a mixer that connects to my stereo. I have recently bought another airport express base station to connect to a pair of active monitors in the kitchen. When I try to scan these on Airport Utility version 5.42 I am only managing to scan one base unit at a time. I have plugged them in separately and reset them, they both have firmware updates, however the utility will only read one at once. I have read that you can link base stations to the same WDS. I would like to know how to go about doing this if it will only scan one airport express at a time. I have looked it up on the net and not found anything that is a simple fix. Can anyone help? In Apple Support it says that multiple Base Stations can be used. I would like to get both Apple Airport Express units to be able play airtunes separately or at the same time depending where I am in my flat. I do not need different music in each room. I would like to stream music from the computer to multiple rooms in the flat without having to continually unplug and configure the Base Stations. Has anyone come across such a challenge? Any help would be welcome.

How do I configure the AX to connect to the hub's wireless network? It will only scan one base station Airport Express at a time in the Airport Utility. I think what I am trying to do is use the hub as a router to the two AX's. Is there a specific way to set this up?
To set up the AX to join a wireless network as a "Wireless Client," using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
Launch the AirPort Utility.
Select the AX.
If not already connected to the AX's wireless network, go ahead and switch to it when prompted.
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <type in the network name/SSID of the wireless network that you want to join or select it from the pop-up menu>
Wireless Security: None OR, if you are using security on your wireless network:
Wireless Security: <Select the appropriate level of security for the existing wireless network: WPA/WPA2 Personal | WPA2 Personal>
Password: <enter your wireless network security password>
Verify Password: <re-enter the same security password>
Click Update to write the new settings to the AX.

Hey, I have a AirPort Express Base Station ( 2nd Generation ), and I wanted to ask that if I join my network at home with the Express Station, will it still run the 2.5 GHz and the 5.0 GHz?

Okay, well I have just bought a AirPort Express Base Station ( 2nd Generation ) and I'm new to it, but I wanted to ask that if it join's a network you have setup at home, will it still run with the 2.4 GHz and the 5.0 GHz.

The AirPort Express will "extend" both the 2.4 GHz and 5 GHz networks and provide more wireless signal coverage when it is connected to another Apple AirPort router and configured correctly.
The AirPort Express cannot provide more wireless coverage though, if you are trying to connect it to another 3rd party wireless router using wireless only.
It should be possible to set up the Express to provide more signal coverage if you connect it back to the main router using a wired Ethernet connection or using Ethernet powerline adapters.

After downloading firmware for airport utility, airport express base station no longer registers with airport utility on my Mac. Now the base station is blinking amber with no info of what is causing all this to happen. Any suggestions?

After downloading firmware for airport utility last night, airport express base station was deleted from airport utility and only Time Capsule remains. When I plug in the base station, an amber light blinks without being able to verify the cause. Any suggestions to remedy this problem?

There are only a couple of things you can do to resuscitate a nonresponsive Express:
"Hard reset":
Press and hold the reset button with a pen or pencil until you see the status light (LED) start to flash amber rapidly, which should occur after about five seconds.
If that does not work,
"Factory defaults reset":
Unplug the Express from power.
Press and hold the reset button with a pen or pencil, then plug the Express back in while continuing to hold the button until you see the light (LED) flash rapidly. This should happen after a few seconds.
Release the button.
In either case you will have to reconfigure the Express as a new device. A moment or two after it has been reset, the LED should be blinking slowly. It must then appear in your Wi-Fi menu like this:
Earlier versions of OS X will report it as "Apple Network nnnnnn".
In either case, select it, and then launch AirPort Utility.
If it does no appear in your Wi-Fi menu after it has been reset using one of the two techniques above, it is defective. Other than attempting another reset, there is nothing you can do.

1st generation airport express base station not showing up in network utilities

when i plug it in the amber light appears and sometimes blinks and/or sometimes steady. needless to say my desktop imac is not picking up its signal. what do i need to do to make it work or is it just not compatible with my new mac?

Your new iMac should not have any issues connecting to the 1st generation AirPort Express Base Station (AX).
When having difficulties accessing the AirPort thru the AirPort Utility, try the following, in order checking accessibility with the utility after each step:
Check the local connection. If you are trying to access the AirPort wirelessly, make sure that you are connected to its wireless network before running the AirPort Utility to administer it. If you are still unable to access it with the utility, temporarily connect your computer directly using an Ethernet cable to one of the base station's LAN ports.
Power cycle the base station. Remove the power adapter's plug from the power outlet, and then, wait 15 seconds before plugging it back in.
Perform a "factory default" reset on the base station.

Profiles in New Airport Express Base Station

Similar Messages

Maybe you are looking for