Profiles not working as expected

I have created a simple publication for a webi report using efashion uiniverse. It's in BO 4.0. I have created 2 profiles. One is State=California and another is Month= 2. If I add any one of the profile to the publication, it works fine.
Example:
Case 1: when I add the profile state=california to the publication, i get data for only state=California.
Case 2: If i remove the profile state=california and add profile month= 2 to the publication , then i get data only for month=2.
Case 3: Now if I add both the profiles state=california and month=2, i get data for sate=california and for all the months. The profile month=2 doesn't get applied.
what's happening is that the profile which is added first is getting processed while the profile added second is not working. If I add the profile month=2 first and then profile state=california, then only month =2 gets applied and not state=california.
Is there any settings that may be causing this behaviour?
Below is the log :
2012-01-17 01:57:44,072 INFO [PublishingService:RunInstancePool-1] BusinessObjects_PublicationAdminLog_Instance_48714 - [Publication ID # 48714] - Running publication instance.
2012-01-17 01:57:44,519 INFO [PublishingService:RunInstancePool-1] BusinessObjects_PublicationAdminLog_Instance_48714 - [Publication ID # 48714] - The global delivery rule for this publication was met; publication processing will now begin.
2012-01-17 01:57:46,168 INFO [PublishingService:HandlerPool-0] BusinessObjects_PublicationAdminLog_Instance_48714 - [Publication ID # 48714] - Document jobs started for scope batch 48,721 [recipients "PGOWDA" to "PGOWDA"].
2012-01-17 01:58:31,695 INFO [PublishingService:HandlerPool-0] BusinessObjects_PublicationAdminLog_Instance_48714 - [Publication ID # 48714] - Distribution jobs started for scope batch 48,721 [recipients "PGOWDA" to "PGOWDA"].
2012-01-17 01:58:42,272 INFO [PublishingService:HandlerPool-0] BusinessObjects_PublicationAdminLog_Instance_48714 - [Publication ID # 48714] - Distribution to destination CrystalEnterprise.Managed was successful. Recipient: PGOWDA, Document Scope: Sales Revenue by Sates : 48730 (Excel) : (AND (IN_LIST Month "3" )(IN_LIST State "California" )).
2012-01-17 01:58:42,797 INFO [PublishingService:RunInstancePool-1] BusinessObjects_PublicationAdminLog_Instance_48714 - [Publication ID # 48714] - Publication scheduling complete.

If I'm not wrong there are some considerations you must apply in your publication. Check in this guide:
http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_bip_admin_en.pdf
Page: 942 Chapter Managing profiles
regards
Erika

Similar Messages

Lightroom export color profiles not working as expected...

I'm trying to produce an image for a commercial printing service using the colour profile they provide. I get the image looking the way I want in Lightroom and export it to a jpg with the printing service's printer profile. As far as I understand it, this should give me a jpg that they can print to give me something that matches what I see on my monitor.
To test what I'm doing, I brought the jpg up in photoshop, and used the view/proof setup/custom to proof the jpg with the service's colour profile. I thought that doing this would show me the same image in photoshop that I had in Lightroom. That doesn't seem to be the case. The colour balance is about right, but the saturation and densities are out -- the photoshop version show less contrast.
So, is there something wrong, or am I misunderstanding the way color profiles work?
Thanks for any info.
Doug

To use the profile for softproof, that is viewing it on a calibrated monitor in the profile. You can either try the new softproofing plug in, or open the file from LR into PS in whatever you usual working colour space is (I would suggest ProPhoto) do not at this stage attach the profile.. In photoshop go to View, Proof setup, custom. In the Device to Simulate, select the profile, then choose either Perceptual or Saturation in rendering intent. Check black point compensation and bioth Simulate Paper color and Black ink, if these are available (this depends on the profile). You will now be viewing the image as it will be when printed as long as your screen is accurately calibrated. You can also select gamut warning under view and see which colours lay outside the gamut of the profile.
Whe you have finished just save the file. Export from the print module from LR with the profile attached and send to your printer.

Silverlight 5 binding on a property with logic in its setter does not work as expected when debug is attached

My problem is pretty easy to reproduce.
I created a project from scratch with a view model.
As you can see in the setter of "Age" property I have a simple logic.
public class MainViewModel : INotifyPropertyChanged
public event PropertyChangedEventHandler PropertyChanged;
private int age;
public int Age
get
return age;
set
/*Age has to be over 18* - a simple condition in the setter*/
age = value;
if(age <= 18)
age = 18;
OnPropertyChanged("Age");
public MainViewModel(int age)
this.Age = age;
private void OnPropertyChanged(string propertyName)
if (this.PropertyChanged != null)
PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
In the MainPage.xaml
<Grid x:Name="LayoutRoot" Background="White">
<TextBox
Text="{Binding Path=Age, Mode=TwoWay}"
HorizontalAlignment="Left"
Width="100"
Height="25"/>
<TextBlock
Text="{Binding Path=Age, Mode=OneWay}"
HorizontalAlignment="Right"
Width="100"
Height="25"/>
</Grid>
And MainPage.xaml.cs I simply instantiate the view model and set it as a DataContext.
public partial class MainPage : UserControl
private MainViewModel mvm;
public MainPage()
InitializeComponent();
mvm = new MainViewModel(20);
this.DataContext = mvm;
I expect that this code will limit set the Age to 18 if the value entered in the TextBox is lower than 18.
Scenario: Insert into TextBox the value "5" and press tab (for the binding the take effect, TextBox needs to lose the focus)
Case 1: Debugger is attached =>
TextBox value will be "5" and TextBlock value will be "18" as expected. - WRONG
Case 2: Debugger is NOT attached =>
TextBox value will be "18" and TextBlock value will be "18" - CORRECT
It seems that when debugger is attached the binding does not work as expected on the object that triggered the update of the property value. This happens only if the property to which we are binding has some logic into the setter or getter.
Has something changed in SL5 and logic in setters is not allowed anymore?
Configuration:
VisualStudio 2010 SP1
SL 5 Tools 5.1.30214.0
SL5 sdk 5.0.61118.0
IE 10
Thanks!

Inputting the value and changing it straight away is relatively rare.
Very few people are now using Silverlight because it's kind of deprecated...
This is why nobody has reported this.
I certainly never noticed this problem and I have a number of live Silverlight systems out there.
Some of which are huge.
If you want a "fix":
private void OnPropertyChanged(string propertyName)
if (this.PropertyChanged != null)
//PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
Storyboard sb = new Storyboard();
sb.Duration = new Duration(new TimeSpan(0, 0, 0, 0, 100));
sb.Completed += delegate
PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
sb.Begin();
The fact this works is interesting because (I think ) it means the textbox can't be updated at the point the propertychanged is raised.
Please don't forget to upvote posts which you like and mark those which answer your question.
My latest Technet article - Dynamic XAML

Subtraction of two key figures normalized to result not working as expected

Hello SAP Community!
I am having problems with getting the right result from a subtraction of two KFs which are "normalized to results" which means the KFs really have values expressed as percentages. The substraction that should be performed is of two percentages (e.g.: 87.298% - 85.527% = 1.77%) but my report prints out the result as "number of units" instead (e.g.: 87.298% - 85.527% = 71,514.00 EA). The two normalized KFs actually "point" to two stock KFs, hence the "number of units".
In order to explain the problem I am facing please analyze below text:
1) Let's assume I have below data:
LOAD MONTH PLANT    MATERIAL HORIZON MONTH     FORECAST UNITS
200805         PLANT-A MAT-1            200805         510,235.00
200805         PLANT-B MAT-1           200805          74,240.00
200805         PLANT-A MAT-1           200806         438,721.00
200805         PLANT-B MAT-1           200806          74,240.00
200805         PLANT-A MAT-1           200807         356,981.00
200805         PLANT-B MAT-1           200807          74,240.00
200806         PLANT-A MAT-1           200805               0.00
200806         PLANT-B MAT-1           200805               0.00
200806         PLANT-A MAT-1           200806         510,235.00
200806         PLANT-B MAT-1           200806          74,240.00
200806         PLANT-A MAT-1           200807         438,721.00
200806         PLANT-B MAT-1           200807          74,240.00
2) Then, assume I have a comparison report, restricted by load month for two months May and June 2008 (filter restricted by two month variables) with FORECAST units spread accross columns for whole horizon (two months also in this case).
Material Plant                                 2008/06     2008/07
===================================================================
MAT1      PLANT-A
                   Base Units (May 2008)        438,721.00 356,981.00
                   Comparison Units (June 2008) 510,235.00 438,721.00
          PLANT-B
                   Base Units (May 2008)         74,240.00   74,240.00
                   Comparison Units (June 2008) 74,240.00   74,240.00
          TOTALS   Base Units                   512,961.00 431,221.00
                   Comparison Units             584,475.00 512,961.00
3) Now, let's suppose we want to know the proportions (%) of Base vs Comparison units, so
we normalize forecats to results an we get the below report:
Material Plant                                 2008/06     2008/07
===================================================================
MAT1      PLANT-A
                   Base Units (May 2008)        438,721.00 356,981.00
                   Base Units % (May 2008)      85.527%     85.527%
                   Comparison Units (June 2008) 510,235.00 438,721.00
                   Comparison Units %(Jun 2008) 87.298%     82.784%
          PLANT-B
                   Base Units (May 2008)         74,240.00   74,240.00
                   Base Units % (May 2008)       14.473%     15.702%
                   Comparison Units (June 2008) 74,240.00   74,240.00
                   Comparison Units %(Jun 2008) 12.702%     17.216%
          TOTALS   Base Units                   512,961.00 431,221.00
                   Comparison Units             584,475.00 512,961.00
4) Finally, let's suppose we want to know the deltas (differences) of Base vs Comparison
units, for both number of units and %. The report now look as below:
Material Plant                                 2008/06     2008/07
===================================================================
MAT1      PLANT-A
                   Base Units (May 2008)        438,721.00 356,981.00
                   Base Units % (May 2008)      85.527%     85.527%
                   Comparison Units (June 2008) 510,235.00 438,721.00
                   Comparison Units %(Jun 2008) 87.298%     82.784%
                   Delta base vs. comp. units % 1.77%       2.74%
                   Delta base vs. comp. units    71,514.00 81,740.00
          PLANT-B
                   Base Units (May 2008)         74,240.00   74,240.00
                   Base Units % (May 2008)       14.473%     15.702%
                   Comparison Units (June 2008) 74,240.00   74,240.00
                   Comparison Units %(Jun 2008) 12.702%     17.216%
                   Delta base vs. comp. units % -1.77%      -2.74%
                   Delta base vs. comp. units         0.00        0.00
          TOTALS   Base Units                   512,961.00 431,221.00
                   Comparison Units             584,475.00 512,961.00
5) PROBLEM:
In my report, the "Delta base vs. comp. units %" is not working as expected and
calculates number of units just as "Delta base vs. comp. units" does instead of calculating the % difference.
So my report looks as follows:
Material Plant                                 2008/06     2008/07
===================================================================
MAT1      PLANT-A
                   Base Units (May 2008)        438,721.00 356,981.00
                   Base Units % (May 2008)      85.527%     85.527%
                   Comparison Units (June 2008) 510,235.00 438,721.00
                   Comparison Units %(Jun 2008) 87.298%     82.784%
                   Delta base vs. comp. units % 71,514.00 81,740.00 <<<WRONG!!
                   Delta base vs. comp. units    71,514.00 81,740.00
          PLANT-B
                   Base Units (May 2008)         74,240.00   74,240.00
                   Base Units % (May 2008)       14.473%     15.702%
                   Comparison Units (June 2008) 74,240.00   74,240.00
                   Comparison Units %(Jun 2008) 12.702%     17.216%
                   Delta base vs. comp. units %       0.00        0.00
                   Delta base vs. comp. units         0.00        0.00
          TOTALS   Base Units                   512,961.00 431,221.00
                   Comparison Units             584,475.00 512,961.00
The formulas are:
a) Delta base vs. comp. units %
Delta base vs. comp. units % = Comparison Units % - Base Units %
b) Delta base vs. comp. units
Delta base vs. comp. units = Comparison Units - Base Units
The KFs
- Comparison Units %
- Base Units %
Are RESTRICTED key figures (restricted to Base and comparison month variables) which
are setup as:
1) Calculate Result As: Summation of Rounded Values
2) Calculate Single Value as: Normalization of result
3) Calculate Along the Rows
The KFs
- Delta base vs. comp. units %
- Delta base vs. comp. units
are FORMULAS setup to:
1) Calculate Result As: Nothing defined
2) Calculate Single Value as: Nothing defined
3) Calculate Along the Rows: user default direction (grayed out)
Thanks for the time taken to read in detail all of this. Long text but necessary to understand what the problem is.
Any help is highly appreciated.
Thank you.
Mario

Hi,
The subraction will be carried out before doing the normalization of your KF's. So, it is displaying "number of units". Create a calculated keyfigure and subtract the KF's and in the properties of this calculated keyfigure, change the enhancement as "After Aggregation".
I hope this will solve your issue.
Regards,
S P.

Events in SubVi not working as expected

Hi, I am reposting this question as my previous one didn't resulted in any satisfactory conclusion.
I have attached my Vi's which are not working as expected. If I remove ONE subVi and its associated 3 controls and two indicators, the other one works just fine, but when I add two SUB Vis, it goes messy. I am trying to learn this way, I am sure it can be done many other ways, but please help me finding out the problem doing it this way as in my final MainVi, I would like to use 8 such sub Vis. Thanks.
Solved!
Go to Solution.
Attachments:
Main.vi ‏11 KB
SubVi.vi ‏12 KB
SubVi_2.vi ‏15 KB

Your main problem is DATA FLOW. A loop cannot iterate until EVERYTHING in it has completed. So, as you have it, you have to have both event structures execture before you can go back to look for the next event. So if you insist on having these subVIs, they need to be in seperate loops.
BTW, you can get away with a single subVI. Go into the VI properties and make it reentrant (preallocated clone). Then each call of your subVI will have its own memory space. A lot easier to maintain that way.
And I know you said you didn't want alternatives, but here's how you can do it all with a single event structure in your main loop.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Main_MODTR.vi ‏10 KB

AFS ARUN Size Substitution Not Working As Expected

Hi All,
I need help with this. If any one of you have worked with AFS ARUN size substitution, kindly provide me with some details on how can I set it up. I am specially interested in setting up size substitution with two-dimensional grids.
I have setup some examples but it does not work as expected.
Here is a small example:
Say I have a size 28/30, 28/32 .........29/30....
What I want to achieve is that during ARUN if there is a shortage of stock in 28/30 then the remaining requirement qty should be confirmed from size 28/32.
with my setup after 28/30 it goes into looking for stock in 29/30, which is what I do not want.
Any inputs will be really appreciated.
Thanks!!

srdfrn wrote:
Hi YOS,
I tried importing a PCX image into CVI 2010 and then sizing the image to the control and didn't see the behavior you have been describing. Would you mind posting an example (alongside an image file) that demonstrates this?
Also, one thing I noticed is that PCX images appear to be quite dated. Could upgrading them to a JPEG or PNG format be an option for you?
Thanks,
Stephanie R.
National Instruments
Stephanie, thanks for the reply.
I am very sorry to state that I made a mistake.
VAL_SIZE_TO_IMAGE indeed works.
What fails to work is VAL_SIZE_TO_PICTURE. (Second option in Fit Mode attribute in control editing panel)
I tried with JPEG and it's the same.
I am attaching an example.(Load_Image.c & ONEP_3Trow_POS1.JPG)
A panel with two picture rings.
- SW_1 remains at the intended size and the loaded picture is not clear.
- SW_2 will fit to picture size and looks OK.
Appreciate your support,
YOSsi Seter
Attachments:
Load_Image.c ‏2 KB
ONEP_3Trow_POS1.JPG ‏4 KB

Notification "Launch the app and go to the library" not working as expected

Hello,
we are sending notification "Launch the app and go to the library" - but it's not working as expected, it's still just launching app with last open folio.
Whats wrong there? Do we need v30 app? We have V29, but this is not mentioned in documentation.
Thanks
Martin

Ah.
Ok, now it's clear.
Anyway i would appreciate possibility to force viewer to switch to library view after new issue is detected, even without notification. Quite often requested feature - "there is new cover in Newsstand, but customer don't know how to download new publication easily".
Martin

DB Adapter polling as singleton process is not working as expected

Am using poller DB adapater to control the transaction per seconds to the downstream system and i want this poller process as singleton (One instance should be in running state at a time).
As suggested in oracle documents , below is the parameters configured in composite.xml file.
<service name="polling_Mange_Alert_Events"
ui:wsdlLocation="polling_Mange_Alert_Events.wsdl">
<interface.wsdl interface="http://xmlns.oracle.com/pcbpel/adapter/db/Application1/int_app_manageAlerts/polling_Mange_Alert_Events#wsdl.interface(polling_Mange_Alert_Events_ptt)"/>
<binding.jca config="polling_Mange_Alert_Events_db.jca">
<property name="singleton">true</property>
</binding.jca>
<property name="jca.retry.count" type="xs:int" many="false" override="may">2147483647</property>
<property name="jca.retry.interval" type="xs:int" many="false"
override="may">1</property>
<property name="jca.retry.backoff" type="xs:int" many="false"
override="may">2</property>
<property name="jca.retry.maxInterval" type="xs:string" many="false"
override="may">120</property>
</service>
Below is the JCA file parameters configured :
<adapter-config name="polling_Mange_Alert_Events" adapter="Database Adapter" wsdlLocation="polling_Mange_Alert_Events.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/vff-int-fus" UIConnectionName="PT_APPINFRA" adapterRef=""/>
<endpoint-activation portType="polling_Mange_Alert_Events_ptt" operation="receive">
    <activation-spec className="oracle.tip.adapter.db.DBActivationSpec">
      <property name="DescriptorName" value="polling_Mange_Alert_Events.ManageAlertEvents"/>
      <property name="QueryName" value="polling_Mange_Alert_EventsSelect"/>
      <property name="MappingsMetaDataURL" value="polling_Mange_Alert_Events-or-mappings.xml"/>
      <property name="PollingStrategy" value="LogicalDeletePollingStrategy"/>
      <property name="MarkReadColumn" value="TRANSACTION_STATUS"/>
      <property name="MarkReadValue" value="Processing"/>
      <property name="PollingInterval" value="10"/>
      <property name="MaxRaiseSize" value="5"/>
      <property name="MaxTransactionSize" value="5"/>
      <property name="NumberOfThreads" value="1"/>
      <property name="ReturnSingleResultSet" value="false"/>
      <property name="MarkUnreadValue" value="Pending"/>
    </activation-spec>
</endpoint-activation>
</adapter-config>
This poller process is running on clustered environment (2 soa nodes) and it is not working as expected as singleton process.
Please advise to solve this issue ?

Hi,
1.Set Singleton property outside   <binding.jca> like this:
<binding.jca config="polling_Mange_Alert_Events_db.jca"/>
<property name="singleton">true</property>
<property name="jca.retry.count" type="xs:int" many="false" override="may">2147483647</property>
<property name="jca.retry.interval" type="xs:int" many="false"
2.Also you can try setting these values in jca file:
<property name="RowsPerPollingInterval" value="100"/>
<property name="MaxTransactionSize" value="100"/>
3. try to increase the polling interval time.
Regards,
Anshul

TCP Window sizing not working as expected for Windows server 2008 R2 SP1

Hi ,
TCP window size is not working as expected. It is varying . Aplied the hotfix suggested by Microsoft and set the multipliccation factor as 1.The window size is not getting auto tuned based on the client machine. The data transfer rate is getting degraded.
Please help.
Thanks,
Pro1962

Hi,
I think window auto-tuning is enabled.
You can disable it by running the following commend.
netsh interface tcp set global autotuninglevel=disabled
Hope this helps.

Container-Managed Transaction Type Attributes not working as expected

I am having a problem with the container-managed transactions not working as expected. I have 2 methods that work as follows:
MethodA{
for(a lot)
call MethodB;
@Transaction Type = RequiresNew
MethodB{
EntityManager Persist to database
I want the code in MethodB to be committed to the database when methodB returns. The problem is that I am running out of memory and MethodA is failing. When methodA fails after numerous calls to MethodB nothing is persisted to the database.
It is my understanding that when using requires new transactions that a new transaction is started for each call to the method and ends when the method returns while the calling method transaction is suspended.
How am I misunderstanding the requiresNew transaction attribute. What can I do to make a batch insert into my database that will not run out of memory (commit when a methodB returns)?
Thanks in advance.

The problem is that EJB invocation semantics for security, container-managed transactions, etc.
only apply when an invocation is made through an EJB reference. In your case, you are directly
invoking the implementation method from within the bean. The EJB container has no idea that's
happening. It's no different than invoking a utility method.
In order to get the behavior you'd like, you need to retrieve a reference to your own bean and invoke
through that. You can use SessionContext.getBusinessObject() to get the EJB reference for the
business interface through which the method in question is exposed.
--ken

Namespaces not working as expected

Hi, I've got problems with namespaces not working as expected. When I isolate a process into a new network and mount namespace, a newly mounted file system will be visible to all processes.
Steps to reproduce:
$ sudo unshare -mn bash
bash# mount -t sysfs sysfs /sys
bash# exit
$ cat /proc/mounts
Result:
/proc/mounts will contain a new line for sysfs. This means the /sys/fs/cgroups directory will appear to be empty as the new sysfs is mounted over the old However you can undo it by
sudo umount /sys
Expected result:
The /sys directory will only be new inside the bash process started using unshare and not anymore once you exit bash.
Did I understand something wrong? Or might this be a bug in the kernel?
Note that when using
unshare -m bash
without isolating the network namespace it will refuse to mount sysfs as it is already mounted or busy. Strange.

Hello, because sysfs is shared, see unshare(1) for more details.

UpsertDocumentAsync not working as expected

I'm using UpsertDocumentAsync to either insert or update a document, but it doesn't seem to work as expected. When I use it either inserts / creates or
replaces the document. I doubt I'm calling it wrong?
await client.UpsertDocumentAsync(documentsLink, this.document);
Working as expected (but with incorrect name) or not working as expected?
Regards,
Joakim
Joakim Rosendahl Consultant at OnTrax AB, Sweden.

Found this one (doesn't contain the work PATCH though)
http://feedback.azure.com/forums/263030-documentdb/suggestions/7075256-provide-for-upsert
Voted for that one, but it doesn't seem like the developer community is interested in upsert/patch functionality =/.
Joakim Rosendahl Consultant at OnTrax AB, Sweden.

Exchange Online Protection (standalone) permissions are not working as expected

Exchange Online Protection (standalone) permissions are not working as expected.
we provided access to Hygiene Management to some members and they not able to access EOP site.
This is standalone EOP.
ksrugi

Hi,
what roles did you have assigned to them and what error message do you get?
Greetings
Christian
Christian Groebner MVP Forefront

Keyboard not working as expected

I woke up this morning and suddenly found a few problems with my keyboard:
The caps lock light is reversed so that the caps is off when the light is on and vice versa
The placement of some of the symbols are moved around. The @ is to the right of the P button and Shift-2 produces a ". Shift-9 is ), shift-8 is ( and many other switched like this.
Resetting PRAM or the computer doesnt fix this

Hello there, morris152.
The following Knowlede Base article provides some great information for troubleshooting your issue with the keyboard:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Particularly:
Some keys don't work as expected
From the Apple menu, choose System Preferences.
From the View menu, choose Speech.
Click the Text to Speech tab.
If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
Click the Accessibilty or Universal Access pane in System Preferences, then click the Keyboard tab.
Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
In the Accessibilty or Universal Access pane, click the Mouse tab, and make sure Mouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, see Unable to type while Mouse Keys is enabled in Mac OS X.
If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
If the issue persists, use Keyboard Viewer to help isolate the issue:
Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
From the Input (flag) menu, choose Show Keyboard Viewer.
If the keyboard is connected and detected by OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
Start from the Mac OS X Install Disc, choose Terminal from the Utilities menu and test the keys which were previously not working. If the keys work while started from the Install disc, then the keyboard itself is working correctly. Use How to troubleshoot a software issue to isolate the software issue that may be causing the keys to not respond.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Mail's from address not working as expected

I have a friend who has an unusual email issue that has me stumped.
He has two accounts set up in Mail, one with his isp pop account like [email protected], and another that is a pop account with his domain like [email protected]
He has [email protected] set as the default (first in the accounts preferences, but when he sends email from this account (verified in the "account drop down on every new email he composes), the reply to, and all the header info makes the email look as if it is coming from [email protected]
I have checked several times, and both of the accounts are set up with the correct and appropriate pop settings (description, mail address, full name, mail server and username and password.
Because of how his isp works, we must use their smtp server to send email from BOTH accounts. But, I do not think that this should change his from and reply to email data as it goes out. He claims it worked as expected until a few months ago.
I cannot think of any troubleshooting path for this issue. Any suggestions on what might be going on?
mark

And what version of Mac OS X is your friend running? Your profile says Mac OS X 10.4.8, but you posted in the Mac OS X v10.3 & earlier forum...
What does Mail show in the relevant headers of the copy of the messages that Mail puts in Sent after sending them?
What you see in Sent is what Mail sends to the outgoing (SMTP) server. If the message gets changed afterwards, some agent other than Mail (probably the outgoing server) is doing it...
Gmail’s outgoing server, for example, does this. In order to be able to use Gmail’s SMTP server with another address, you must first enable that address in Gmail's Settings > Accounts page, and let Gmail validate it by verifying that you do indeed own it. If you don’t do this, even though Mail will correctly send the message from the address you specify, Gmail’s SMTP server will silently change it to the address associated with the Gmail account that corresponds to the username specified during SMTP authentication, instead of refusing to send the message as other SMTP servers would do in those circumstances.

Profiles not working as expected

Similar Messages

Maybe you are looking for