Profit center and segment columns in the General ledger view of FB03L
Hi Experts,
one customer is asking how to get the Profit center and segment columns in the General ledger view of FB03L.
Could you please assist?
Thanks, Mateus
Enter company code, doc. no., etc. in the selection screen of FB03L and hit Enter. In the next screen that displays the document, choose change layout option (it is third icon from the right in the icons that are right above the document line items) and move profit center and segment fields from Column Set (the fields on the right) to the Displayed Columns (left) and hit Enter. You will see the fields with values, if any. Using the same icon again, choose save layout and save that layout.
Similar Messages
-
New Ledger - Profit Center and Segment in stock purchase
Hi Gurus,
In a case with New Ledger where Profit Center and Segment scenarios are activated:
1. How derivate the Profit Center and Segment in a stock purchase, because here there isn't an expense account imputed to a Cost Center.
stock +1000
supplier -1000
Thanks in advance.
José LuisHi,
Material Master will have a profit center attached and profit center amster shouldl have segment. And thus derivation of both will happen.
Regards
Milind -
Entry View is not matching with General Ledger View in a document
Dear Experts
My problem is entry view is not matching with general ledger view because of profit center. I have posted the general ledger account with posting key 40 and profit center 1200 but when we see the same through general ledger view getting different profit center (i.e. 1410).
Offsetting general ledger account is compulsory ? if it is working for one general ledger account it should support other general ledger accounts also, but it is not the same in our scenario. Any customization level problem ?
Earliest help is needed.
Thanks - VG.Hello VG,
In the general ledger view, the line items for the selected ledger are taken from a data merge between the document line items in the entry view and the document line items in the general ledger view. In the case of fields that exist in both views, the data in the general ledger view takes priority. However, fields are only transferred from the general ledger view to the fields in the entry view if they are active in the relevant ledger. If fields exist in the general ledger table group but are not active in the relevant ledger, they are transferred from the entry view. In the data merge, amounts in the entry view are in some cases (such as cash discounts) distributed proportionately across the amounts in the general ledger view. This is necessary if, as a result of document splitting, a line item in the entry view has been split into multiple line items in the general ledger view. The proportionately distributed amounts in the entry view cannot then be used for reconciliation with account balances because the total of the cash discount amounts from the line items, for example, does not correspond to the balance of the cash discount account as a result of the rounding differences.
Pls check this,
Rgds
Manish -
Drill Down reports for Profit Centers and Segments
Hello Experts
I would like to down load the "Drill down reports for profit center and segments". I have found standard SAP documentation through (http://help.sap.com/erp2005_ehp_05/helpdata/EN/46/f6fc4e7a7569b5e10000000a114a6b/frameset.htm ).
As per the given guidelines, i have beening trying to down load from client 000, the spool request is showing finished (with out any error and in one / two seconds) .. but the reports are appearining in SAP Easy Acess.
I have checked with Basis team, whethere i have restrictions with my userid. Even with Basis id also, we are being unable to activate these reports.
Does it required any configuration / licence issues before i need to lookinto before download?
Kindly revert
Regards
Anil KumarHello Experts
This is solved. However, i am mentioning the solution here for further references
Before downloading the drill down reports, we need to activate the business funciton "FIN_GL_CI_1" through T.Code SFW5
Regards
Anilkumar -
Dummy profit center and profit center clearing account being used
Dear Gurus,
We are implementing ECC 6.0 and will have FI PCA.
I have 2 profit centers.(and one dummy profit center 9999)
1)RM common
2) FG1
When RM is issued to production order and order is confirmed, the goods movement are 261 and 101 respectively.
the entry at the time of confirmation is
Discription Profit center
Consumption of RM 9999
To RM inventory RMCommon
FG Inventory dr FG1
To Factory output account 9999
What should actually happen is instead of 9999 consumption of RM should hit profit center RM common and instead of 9999 the factory output account should hit FG1.
The profit center clearing account is being used for the entry in the GL view (as opposed to entry view in accounting)
Only then will accounting treatment be correct.
I have checked field statuses of the respective accounts and they have profit center and segment as optional fields.
Can you suggest what may be wrong and where i need to change the splitting config.
Regards,Hi
Profit Center is derived from the assignment of Profit center in material master in costing view.
In the production scenario,
Consumption of raw material Dr - PC of FG
Cr Stock of RM - PC RM
Dr Stock of FG - PC FG
Cr confirmation of production of the Finished goods - PC FG
The reason for that is the production order is created with respect to the Finished Goods, master data of the production order inherits from the Finished goods.
Regards,
Suraj -
Cost center empty in general ledger view for balance sheet accounts
Hi !
We are implementing ECC6 with new GL functionalities. We activated differents scenarii: cost center, profit center and segment.
Using FB03 (display document) we noticed that in the entry view, everything is fine: cost center, profit center and segment are filled successfully.
However, in the New GL view, the cost center is not filled for balance sheet accounts.
Any solution?
Regards,
JulienHI,
Cost center will never be filled for the Balance Sheet account. For Balance sheet account Profit Center is required to be filled.
Don't be afraid this is the fundamental practice across the globe. Cost centers will be filled in only Expense account.
Exception to above rule is Asset master will recieve cost center because this will help in determining asset per department.
Regards,
Chintan Joshi. -
Document number ranges in entry view and in General Ledger view
What is the difference between Document number ranges in entry view and in General Ledger view ?
We have new GL activated in our system , and found that the GL Document types ( SA) are assigned to document number ranges in entry view . What is the need to define document number ranges in General Ledger view ?Hi,
Document Number Range in entry view is the document numbers which are posting in your leading ledger. You cant achieve the same document number range to the general ledger view. A General ledger view can have both Leading ledger view and non leading ledger view therefore document number range should not be kept same for both ledgers as your running document number gets skipped.
That to some times you can only post documents to only Non Leading ledgers. Therefore a separate number ranges needs to be created for general ledger view
Hope u understood.
regards
srikanth
Edited by: boddupalli srikanth on May 21, 2009 9:28 PM -
General ledger view and entry view
Can any one help me in understanding the difference between GL(general ledger) view and entry view?
Hi,
While entry view shows the Customer/ Vendor and other revenue/ Expence GLs
General ledger view shows the Reconciallation GL and revenue/ Expence GLs. We cannot find Customer and Vendor details here.
Hope your question is answered.
Regards,
Sharan -
Document types for Entry view Vs document type for General Ledger view
Dear experts...
Can you explain what is the deference between Document types for Entry view and document type for General Ledger view?
DasuHi,
Document Types for Entry View
In this activity, you define your document types. Document types are used to differentiate the business transactions and to manage how document are stored.
Document Types for General Ledger View
You define for non-leading ledgers the document types for the documents in the General Ledger view. At the same time, you assign for each document type a number range to be applied in the assignment of document numbers:
o You do not need to make these settings for your leading ledger
because, in the case of this ledger, the document number in the
entry view always corresponds to the document number in the general
ledger view.
o You only have to make these settings for any non-leading ledgers
that have a fiscal year variant that differs in at least one company
code from the fiscal year variant of the leading ledger in this
company code. In this case, the document number in the entry view
does not correspond to the document number in the general ledger
view and you have to define a separate document type with document
number assignment for the general ledger view.
For all non-leading ledgers that, in the company code to which the
postings are made, have a fiscal year variant corresponding to the
fiscal year variant of the leading ledger in this company code, the
document number in the entry view always corresponds to the document
number in the general ledger view.
Note
The need to define a document type for documents in the general
ledger view depends only on whether the fiscal year variant of the
non-leading ledger in the company code (to which the postings are
made) differs from the fiscal year variant of the leading ledger in
this company code.
Regards,
Kiran -
Display Currency tab during General ledger view in T-Code F-53
Hi
When Iam making a payment in foreign currency using T-Code F-53, then on simulation of the document in the General Ledger View (Ctr+F12), Iam trying to press the tab 'Currency' (F9), however, it shows blank, there is no currency visible in it. However, when I press the same tab during Entry view simulation, it shows all the three currencies maintained.
Can anybody analyse the situation and tell me what can be the problem.
Regards
Abhishek KumarHi,
If you have activated New GL then check in Financial Accounting Global settings (New) > Ledgers > Ledger >
Define currencies of Leading Ledger. Secondly, you have to check in FBZP, the payment method in country >
Currencies allowed - If you have not defined anything all the currencies will be taken. In F-53 when you
processing the transaction itself, you can see three currencies, i.e. local currency, group currency, and
hard currency translations. If you click display currency F8, the system will give a pop up for selection
based on document currency(by default), local currency, group currency and hard currency. Please check
and revert back.
Regards,
Sadashivan -
Splitting in NEW GL with one profit center and two segments
What options are avialble for splitting in New GL when there should be one profit center and two segments - maybe characteristic derivation could solve it?
If I have understood your question correctly then you have one profit center and you want to attach two segments to it.
Segment is higher level than the profit centre. One segment can have n number of profit centres but one profit centre will have only one segment. This is the drawback in using the 'segment' in SAP. Also, it is difficult to change sengment embedded in profit centre master.
You might try using profit centre groups than segment.
-Vedavatee -
Profit center and Partner profit center assignment in TM transaction
Dear Experts,
I am very new on TRM, could you tell me how you define profit center and partner profit center for FI posting pass from TRM? I did not see there is field for PC or PPC on any of TM transaction.
Appriciate your help.
thanks
CKHi,
For postings from treasury you can assign default profit center and business area (also segment from EH3) to account assignment reference. The basic idea being that you generally manage all similar transactions with same account assignment reference through a same organization unit like profit center. You do this assignment in TRM -- General Settings -- Accounting -- Link to other Accounting Components -- Assign additional account assignments.
However in case you want to have a different profit center derived in a different way than through account assignment reference, you could use a custom logic and derive it using the BAdI TPM_ACCIF_TRAC.
Regards,
Ravi -
Unable to update profit center or plant code in the customer line item
Hi,
We require the profit center and plant code and division in FI
documents (Posted through billing document or through direct FI entry)
We are unable to input plant or profit center in the customer line item
while using F-21 or any other FI transaction
The plant and profit center is not appearing even in customer line item
in RV document (From SD billing)
We have made the Field status group as optional for the reconcilation
accounts.
Regards
SembianHi
Profit center / cost center are generally entered in revenue & expense line items (P&L items). Customer / vendor master and line items are balance sheet items which will not show profit / cost centers.
Regards
Neeraj -
Functionality of Profit Center and Cost Center
Hi,
I am unable to understand the functionality of Profit center and cost center, I know that cost center represents area within an organization for which you will like to see the expenses for a particular time period. for example in an organisation we have three cos centers Accounts, HR and Admin. whenever you post an accounting document in FI you will specify the cost center to which the expense relates. but in some cases when you post an expense and give the relative cost center the profit center is also driven by the system. why is this behavior? i mean i have posted an expense not an income then why is system driving the profit center as well?
Profit centers are used if you want to see the profit of different area of your organisation. in what kind of postings we use profit center? and if we could use profit center to draw income and loss for a specific area why do we need segment reporting? and what is the difference between Segment and Business area. what i understood from their definition is that they are both same and use for same purpose.
I am totally lost in these concepts. please some one help me out with an example. i am stuck at this point. some one please clarify my concept of Profit Center, Cost Center, Segments and business area please.Hi,
Cost center & Profit Center are organizational units within the enterprise structure , created for better internal control.
As the name suggests Cost Center is the lowest level of the organizational unit representing a defined location of cost incurrence or otherwise to which you can meaningfully assign the cost(both direct & Indirect).
Profit Center is an organizational unit in accounting ,where management would require to see the profitability & fix the responsibility. It may be each plant/division of the company .
If you consider the Plant is the Profit center, you can take the various deptts in the Plant as cost centers. you can draw a balance sheet & profit & loss account statement at profit center level but this will be for your internal use.From this you can know the ROI on particular area. Profit centers are assigned inside the cost center so when you update cost center, profit centers are updated automatically.
Where as Segments are used for legal reporting of your accounting standard as per IFRS. Both Business Area & Segments are more or less same with some technical difference.
Business area is a free organizational unit. It can be derived through cost center or can be entered manually.
But segment is a dependent organizational unit. It is defined & attached inside the profit center master data. It can’t be entered manually.
SAP suggest to use the Segment concept.
Thanks & regards
Deepak -
Profit center and AR Residual Item
Hi,
The Open Items ( Invoices are entered Dr Customer Cr Sale Revenue ) obtain the Profit center from Revenue Line item (the off setting entry ).
During month end in Profit center 1KEK transfers the OI balances to the respective Profit center .
In Clearing the Open Item using F-28 if there is a shor pay then we prefer to create residual item .
What will be the profit center for the residual item as there is no reveunu ( Dr Customer Cr bank receipt)
How do I copy the Profit center of original Invoice to the residual OI?
Is there any way I can enter Profit center on the screen manually ?
Regards,
Chitra.Hello,
I am facing the similar issue. Residual items are flowing to "DUMMY" profit center during 1KEK. This is because in the document of residual item all the line items are Vendor/Customer line items. System is not able to find a Profit center from the offsetting entry and hence determines Dummy profit center.
Also, I face the similar issue for transfer between Vendor/Customer.
Please help with how you overcame this issue.
Thank you in advance
Maybe you are looking for
-
Adobe Photoshop Album 2.0, migrate to iPhoto?
After 20 years owning PCs, I bought my first Mac. I have about 13,000 photos cataloged in Adobe Photoshop Album 2.0, but I'm having trouble figuring out how to preserve my organization in iPhoto (or even if it's possible). Photoshop Album uses an ext
-
Apple TC and Netgear Router behaving as one Wireless Network
Having had a problem recently with an HP 7520 printer suddenly begin to disconnect and reconnect to the wireless network of my Apple TC I have tried several workarounds. My setup includes a Netgear Modem/ Router (providing wireless network A) which i
-
Until recently I have been able to sync my office desktop Outlook 2010 to my home laptop through my iphone. Now my home laptop does not upload my recurring appointments to the iphone even though they appear on the laptop. I did play with the 'days ba
-
Background print of object connected via object services
SAP's Object Services allows external objects (spreadsheets, Word docs, web sites, ...) to be attached to SAP documents. Some of our invoice documents have a URL attachment. Opening the URL displays a word document which is a statement of the service
-
Automatic - SPL Screening in GTS
Hello: Is there any specific setting in GTS for automatic screening of vendors and customers against SPL list. I mean whenever business partners are passed from ECC to GTS. The business partners are screened against SPL. how is this is being done? Is