Profit center assignment in 3KEH does not work

Hello,
I make posting (FB50) to a balance sheet account to which a profit center is assigned in t-code 3KEH (Additional Balance Sheet and P&L Accounts). I do not input any profit center in FB50. As a result of this posting I expect that the line item should be visible on the assigned profit center. Unfortunately this line item is not transferred to Profit Center Accounting - line item is not visible in KE5Z report.  But when I input the profit center in FB50 manually, then the line item is visible on the profit center.
Could you please give me advice, what could be the reason that the assignment of profit centers to accounts in t-code 3KEH does not work?
I checked the settings in 1KEF and see that online transfer and line items transfer are allowed in Profit Center Accounting.
Best regards,
Robert

Hi Robert,
If you are using NewGL, you can then use trx. FAGL3KEH to set a default profit center on company code level.
Please read also note  826357. I hope this helps.
Best Regards,
Vanessa.

Similar Messages

  • The Notification Center Yosemite primary user does not work in my Macbook pro and the other users if it works.

    The Notification Center Yosemite primary user does not work in my Macbook pro and the other users if it works. How can I fix it?

    The Notification Center Yosemite primary user does not work in my Macbook pro and the other users if it works. How can I fix it?

  • Loging into game center with apple ID does not work. What do i need to do?

    My apple ID does not work for signing into game center.

    Apple TV doesn't come with HDMI cable, so you would have had to buy the cable separately unless the Apple TV was bought used. Did you purchase the device from Apple or an authorized reseller?
    Are you sure you're trying the right input?
    The other is a smaller one that is for micro USB (which is used for support purposes only)

  • Product: Accessories Assignment block - link does not work

    Dear all,
    We have an assignement block 'Accessories' to link products together.
    However, the link does not work :
    If I click on the first link, nothing happens.
    Is there any customizing to maintain for that point?
    Thanks a lot,
    Regards,
    Emilie.

    Hi ,
    See if this link is helpful for you.
    Product Proposal -Accessory assignment block cannot be expanded, CRM UI 7.0
    Rgds
    Hari

  • Notification center and auto-lock does not work. iPhone 5 iOS 7.

    Hey there!
    I have got an issue with my iphone 5 after installing iOS 7.
    AfterI switch on my phone everything works perfectly but after some time ( sometimes it is few hours, few minutes ) the following options stops working:
    1. Notification center -  I cannot slide it down, neither the one from the top or bottom. Nothing happens when I try to do that.
    2. Auto-lock screen stops working! It is eating my battery really badly.
    Everything comes back to normal after restart but then again... some things happen as I mentioned above. Please Apple fix this ASAP because it really is frustrating. Am I the only with who has this issue?
    I am looking forward to hearing from you.
    Kamil

    Same here. For me, all three happens. Notification Center stops working, control center stops working, and the auto lock stops working. What I noticed:
    1. When I hold the power and home button together to do a force restart, the time it takes for the above problem to occur is far less than if you do a normal power off and on....
    2. Im currently running iOS 7.0.4... And with every update, the time it takes for the problem to come up again is getting shorter. With iOS 7.0.0 it used to be like 3-4 days. 7.0.2 it came down to 24-36 hours... Now, with 7.0.4 it happens within a couple of hours.
    It really gets frustrating because even if you are in the lock screen, the display doesnt turn off unless you manually press the sleep button....
    The only things I haven't tried yet:
    - Reset all settings (Frustration after the iOS 7.0.4 update might force me to do this within the next week....)
    - Restore the phone (Mine's 64GB 4S... And I don't sync my phone quite often so this is quite a hectic process for me. I dont want to do this unless I really have to)
    - Mutaz

  • OKB9 does not work to derive a Profit Center from Document splitting

    Hi GL Gurus,
    I am trying receive customer payment with payment difference. Original invoice has two Profit centers so Customer line items have these 2 PCs derived by Doc splitting. I have defined Document splitting characteristic as Profit Center in General Ledger and In Controlling as Cost center. While posting Customer payment with payment difference , It gives me error that CO object does not exist. I have done OKB9 assignement to the above 2 profit centers but it still does not derive a Cost center.
    Do you know how to resolve this error?
    Thanks in Advance!

    I have done OBXL and then OKB9. In OKB9 you have feature as "Mandatory fields for detailed account assignments.Field for specifying detailed account assignments." Here you can define for a Cost element/by Profit center assignment and then to a Cost Center. This works when you have a Cost element/Profit Center combination. But the situation above it does not read the PC derived in Customer line item.
    The issue is OKB9 does not Read the Profit Center when it is derived by Document splitting/Inheritance.
    Is there a solution to do this?

  • I want to disable or remove Game center from my iphone. It's always pop up during i play hay day game. So i can not solve this problem. Any way i try to log in game center my several Apple id account but it does' not work. I am still stuck in log in page

    I want to disable or remove Game center from my iphone. It's always pop up during i play hay day game. So i can not solve this problem. Any way i try to log in game center my several Apple id account but it does' not work. I am still stuck in log in page

    The Game Center app is pre installed and cannot be removed from the device.
    Best thing to do is move it to the last available screen.
    Hold down the Game Center app until all the apps jiggle then sliide the Game Center app to the right from one screen to the next. This requires a bit of finesse, but it's doable.
    Press the Home button one time to stop the apps from jiggling.
    For the Apple ID issue, try resetting.
    Tap Settings > General > Reset > Reset All Settings
    Then try your Apple ID and password for the Game Center app.

  • HP Officejet Pro L7590 Printer - HP Solution Center does not work

    I am not able to get the Solution Center suite to work because the installation has an error.  I am using Windows 7 Home Premium.  The printer I am installing is the HP Officejet Pro L7590.
    If I go to Devices and Printers and add the printer.  The driver Windows 7 driver would work, it would detect the printer and the test page and everything would be fine. 
    However, if I install using the software provided by HP for the L7590 it would result in an error and it would not work. 
    The failed driver installation is only from installing the full bundle software provided by HP, if by itself through Windows 7 it would be fine.
    Because of the failed installation using HP software the HP solution center does not work.
    In Devices and Printers, the printer has the yellow exclamation point requiring troubleshooting, I click on troubleshoot and no device drivers were found.  In addition, I could not remove the printer.  Before installing the HP software, I could successfully install the printer and there would be a green checkmark, and there would be an option to remove the printer.  This leads me to believe HP has a faulty software bug that is causing the error.
    I am suppose to use the HP add a printer shortcut that populated on my desktop after installing the software, the first time it would show the failure to successfully install the driver, afterwards it would not even detect my printer if it is plugged in.  If I remove the usb and reinsert it, the Windows would just show the failed driver.  I repeat, it failed after I install the software, it works fine without.  The primary reason I want the software is to use the scanning feature.

    Hello NickRT, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are having software installation issues.  i would like to try and assist you.
    I would suggest Uninstalling the Printer Software.
    Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration.  You can do so by following this document: How to perform a clean boot in Windows.
    Once the computer is in clean boot mode, I would reinstalling the HP Officejet Pro Full Feature Software and Driver.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • WRT610N disconnects and does not work with Vista or media center extenders like the DMA2200

    Linksys and all other router manufacturers advertise the greatness of the wireless 5ghz band (especially with 802.11n), but I’m beginning to have my doubts.  It is true that the 5Ghz band is hardly being used so you'll have virtually no one to compete with.  However, the 5Ghz distance in no way compares to 2.4Ghz, and as a matter of fact, I find it to be quite terrible.  At approximately 20 feet away, both my Linksys DMA2200 and HP notebook barely get 1 bar using the 5Ghz N band with my WRT610N router.  In comparison, while using my 2.4Ghz WRT54g router, I get 5 full bars at that range, and at least 2 bars from anywhere else in my house.  
    I have all Linksys equipment in my house as I have been impressed with all of their 2.4Ghz in the past.  However, I’ve recently upgraded everything to dual-band N equipment and found numerous flaws in each of the new devices, plus none of them really even play well together.  My setup is: Linksys 610n router, DMA2200 media center extender, and a WUSB600N Dual-Band Wireless-N USB Network Adapter for my laptop – all of which are currently using the most up-to-date firmware. Other devices include a WRE54G extender and  Nintendo Wii. 
    Problem  #1) The LELA software with the new N devices doesn't even recognize that my DMA2200 is a media center extender.  Using LELA, I should be able to select my media extender and allocate more bandwidth for streaming media.  However, since my extender only shows up as an “unknown network device” those options are greyed out.  I tried to manually change the device to a media center, but still no go.  I suppose you can manually allocate bandwidth in the router setup somewhere, but considering these are all Linksys products, it’s absolutely ridiculous that an option specifically incorporated in the LELA software for a Linksys Media Extender does not work!!!   
    Problem #2) If you are only using one system with the router, the router might actually work as intended.  For most of us though there are going to be at least 2 or more systems connected to the router (wired, wireless, or a combination of the two) such as a PS3, Wii, laptop, PC, media extender, Xbox, etc.  If that’s the case, you’re probably screwed because you WILL experience frequent dropouts… ESPECIALLY if just one those clients is a VISTA machine.   Check the Linksys forums and you will find that this seems to be a problem with all of the new Linksys routers (610N, 310N, and 110). 
    Here is a Microsoft article that explains the issue
       http://support.microsoft.com/kb/928233/en-us 
    Problem #3) Because of  problem #2 I will never be able to get rid of the dropouts since my network is using one of Linksys’s media center extenders.  The DMA2200 is essentially a VISTA PC to some extent and accepts DHCP requests the same as a VISTA PC.  Since it is not really a PC though, there is no registry modification that can be done to alleviate the VISTA problem (not that the registry mod really works anyways).  So as long as I try to use my DMA2200 wirelessly with my WRT610N router, the frequent dropouts will occur and there’s nothing I can do about it.  This is REALLY TERRIBLE since the DMA2200 is specifically designed to be used with the WRT610N router in order to take advantage of the 5Ghz band and wireless N transfer rates.  You absolutely need 5Ghz wireless N to efficiently stream HDTV WIRELESSLY, but if you lose your connection every 10 minutes, it is impossible to watch any type of streaming media. 
    Problem #4) As mentioned already, when the “N” 5Ghz range is working on the WRT510N router, the distance sucks compared to standard 2.4Ghz G, N or mixed mode networks.  You can try to make it better by strictly using N products, disabling the 2.4ghz band all-to-gether, and using the wider 40mhz frequency, but it doesn’t really help.  The higher 5Ghz band is a more concentrated signal and therefore simply does not reach as far as the lower 2.4ghz band.  I wonder why all of these new products state that the 5Ghz range will increase your distance, when in fact it actually makes it worse?   
    So… basically, this router does nothing that it claims too and is basically rendered useless on any network with a VISTA machine.  This has not been addressed by any Linksys firmware updates or VISTA software updates so there is no reason to even consider using this router if you you’re using VISTA or some type of VISTA Media Center Extender such as the Linksys DMA2200.  
    Although, I’ve always sworn by Linksys in the past, the amount of wasted time, frustration, and horrible support has really changed my view about them.  I’ve reverted back to my old trustworthy WRT54g router and had to run cable through my house so that I wouldn’t have to box my DMA2200 extender up and let it collect dust in the attic.  It’s really disappointing that I spent all this money to buy this equipment specifically because they’re supposed to work together, but in fact they don’t.  Plus what’s the point of having top notch wireless equipment if you have to run cables in order for them to work? 
    Message Edited by bobbodavis on 11-15-2008 07:37 PM

    I have fixed all the IP adresses to avoid the DHCP problem but I still have problems.
    I have sereval scenarioes:
    1. MC < 1Gb wire > WRT610N < 5.0n WIFI > MX
    I can see HDTV on this one but it disconnects
    2. MC < 1Gb wire > WRT610N < 2.4b/g WIFI > MX
    No HDTV and disconnections
    3. MC < 2.4b/g WIFI > WRT610N < 2.4b/g WIFI > MX
    No HDTV but no disconnections - but very slow and streaming like youtube
    4. MC < 100Mb wire > WRT610N < 2.4b/g WIFI > MX
    No HDTV but nice picture - testing for disconnections right now - 30+ min.
    Result:
    This test was very good. Stabil streaming, no disconnects for an hour. Won't support HDTV but the rest seem to work fine.
    5. MC < 100Mb wire > WRT610N < 5.0n WIFI > MX
    Not tested yet - looking forward to this - might bring me HDTV.
    Result:
    This gives HDTV but there is a problem with stability on the streaming but very difficult to see on the picture. Testing for disconnects - now tested for 30 min. - no disconnects.
    This looks really promissing.
    I am pretty sure that the WRT610N have a problem in the switching part of the router specially when it has to switch from 1G to WIFI. I bought the WRT610N to get HDTV on WIFI and Cisco markets the DMA and WRT610N as a perfect match. But it definately have problems - i still do not understand their silence about this.
    I will come back with the last results when I have them
    /John
    Message Edited by Infraxpert on 01-05-2009 04:38 PM
    Message Edited by Infraxpert on 01-05-2009 05:35 PM

  • Search help for cost center does not work after SP upgrade

    Hi,
    Create a shopping cart in SRM and go to the cost assignment tab. When click on the search help to enter a costcenter, we don't get any search help screen.
    Thanks

    Kindly check note: 1259735 Search help of generic account does not work
    Additionally Check the 5th question/answer of note 815849.

  • Pressing play in control center in ios7 does not work

    Has anyone else tried to press play in control center to continue listening to itunes and nothing happens? The volume control works but not play..

    I'm with you.  I went from a Windows HTC phone which worked perfectly to an IPhone 5S and now the message feature on my 2010 Honda Insight does not work. Since I do quite a bit of traveling, this is a little annoying.

  • User WF-BATCH and BAPI_PO_RELEASE does not work without printer assigned

    Hello Gurus,
    The function BAPI_PO_RELEASE is used in our PO approval workflow, but this one does not work till the user WF_BATCH has no printer defined in USR01-SPLD. This is a strange behavior because the output message assigned to the PO has a message transmission medium equals to 5 (External send) => not print.
    Does someone have already met the same issue?
    How this could be solved without assigning a default printer to user WF_BATCH?
    Kind regards
    Chris

    Hello Tison,
    we're using also the WF-BATCH user having no default printer assigned and it works fine with the final release.
    However, there's usually the output message NEU with a prerequesite maintained that the PO has to be finally released. So this way there can be an additional output message found upon releasing. But we have a printer assigned using the condition records and we're not using the type that you've specified.
    So I'd guess that, indeed, the problem lies within the message. You could copy the WF-BATCH user to a dialog user and release the purchase order in dialog and see what happends.
    With the very best wishes,
       Florin

  • Assigned F key to play an action does not work. Why? Using cs6  iMac and wireless key board

    Assigned F key to play an action does not work to play the action on an image. When the F key is selected it seams to control computer attributes rather than the play action assigned in photoshop. Why? Using cs6  iMac and wireless key board.
    Is this a possible preference setting in mac or is it a setting in cs6 photoshop ? Help and knowledge will be appreciated.

    *** Moderator Action ***
    This networking question has been moved from the Solaris 10 discussion space,
    to the Solaris Networking discussion space, for closer topic alignment.
    Whereas there may be IPV6 nuances specific to your Solaris 10 environment and to the hardware, this appears to be a discussion that may be more global in effect.

  • After clicking game center does not work game in IPhone

    Hello everyone
    I work Flush Bolder 4.6
    Using AIR SDK 3.9
    I create a lot of games and has never met with such a problem.
    When I run the game at IPad my game works without problems. After hiding Game Center game works fine.
    In IPhone after clicking Game Center game does not work. All the buttons do not work.
    What could be the reason?
    Thank you

    I have the same problem...
    Tried using Chess, editing the hosts file, using the iOS simulator from Xcode, I added 208.67.222.222 e 208.67.220.220 to the DNS Servers, and I currently have a clean Mountain Lion instalation...but GameCenter still doesn't work.
    I get a small green window that covers the login fields, and the window has nothing on it, just a button to "Cancel". I put my password and click on Login, but nothing happens...

  • Notification center does not work at all with mail

    notification center does not work at all with mail there is no sonud no banner . i try to chek and unchek thas box may it is something may effect but still not working where is the notifiication center they said to us about it but i want be fair it's working for imessege and it's not working also for app store update like they said there is abig kiind of joke. i use macbook air mid 2011.

    Have you changed the system voice to an English one in system preferences?

Maybe you are looking for