Profit Center Disabled while Creating Material with Custom Trnx

Hi all,
I am trying to extend material to a another Plant with Custom trnx to create material.
I am able to create / extend material for some plants. But, for few plants, I am getting error to input data for 'Profit' Center' field in 'Sales:General / Plant' view' as 'MARC-PRCTR' is not ready for input. The field is in disable (grayed out) mode. But, for other materials, I am able to extend the material successfully.
The Profit center value is same which used for previous materials, extended successfully. Except the target Plant , all the details are same.
Coudl some one can help on this.
Regards
SP

this is most probably because of missing customizing of field selection in OMS9 transaction

Similar Messages

Display of Profit Center field while creating asset in AS01

Dear Experts,
I have a requirement of displaying profit center field while creating asset in AS01. Currently there is no option of profit center in AS01. My client uses the profit center reporting, so they want to assign a profit center at the time of creation of asset in AS01.
Is this possible to display profit center field in AS01, or else any other option to tackle this issue.
Regards,
Juned

Hi,
You can only have COST CENTER in asset master, but not profit center.
You have to maintain the respective PC in cost center master data only.
If Cost Cetner field is also not in AS01, then you need to activate it first.
SPRO->FA->AA->Integration with GL->Additional Account Assignment Objects->Activate Account Assignment Objects.
Here you need to activate COST CENTER field. Now you will be able to change the field status of cost center field in screen layout for asset master data as REQUIRED field. and SAVE
Then in AS01 you can enter COST CENTER
Regards,
Srinu

I want validation while creating material master with profit center

Dear Experts,
I want validation while creating material master with profit center.
If 0001 plant having 100100 profit center
0002 plant having 200200 profit center
Material A cant be created for 0001 plant for with wrong profit center 200200.
Kindly help & provide me solution clearly

Hi,
Profit centers are assigned to controlling areas. And controlling areas can have many plants under them. So as long as both the plants and profit centers are in the same controlling area users will be able to extend the materials.
You should put in your validation control in the material master user exit. One of the exits you can use is
MGA00001 Material Master (Industry): Checks and Enhancements
Thanks & regards
Hameed Parvez

Project with profit center was not created for entire period

Hi everybody,
I need a help with a problem here.
The alert mesage "project with profit center was not created for entire period" was displayed.
Then I searched for the creation dates and the profit center was created before the project gets its firsts postings. Therefore, some line itens don't exist in profit center (ledgers).
My two questions:
The first one, is it possible to input line itens in a retroactive way?
Everytime I need to use the project master data this alert is displayed. How can I fix avoid this message?
Thanks,

Hi,
Regarding your issue, it is theoretically possible to reverse all settlements up to the start of the project and then to settle again it
is a must to check in standard if the profit center is valid from the project start date onwards.
Check the attached note 1048945.
The system generates error message KM700 ('Profit center <PRCTR> does not exist for <date>') when you enter a profit center on a project definition if the profit center is not valid in the entire period between the basic start and the basic finish date of the project definition . However, only one warning message should only be generated in this case.
regards
Waman

Profit center derivation in sales order with New GL

Dear Gurus,
We are using the New GL, so EC-PCA is not activated.
We would like to set-up a substitution rule in order to derive the profit center in the sales order and customer invoice (we don't want the profit center to always be derived from the costing view of the material master data).
I created a substitution rule with transaction 0KEM and assigned it to the controlling area with active status"3" (Other transactions + cross-company (orders + billing doc.)).
Unfortunately, it doesn't seem to be called when I create a sales order.
Can you please confirm gthat 0KEM is the transaction to use even when we use New GL without EC-PCA?
Where should I put a breakpoint in order to trace the call to the substitution rule?
Thanks a lot in advance for your help.
Regards,
Simo

Dear Gurus,
We are using the New GL, so EC-PCA is not activated.
We would like to set-up a substitution rule in order to derive the profit center in the sales order and customer invoice (we don't want the profit center to always be derived from the costing view of the material master data).
I created a substitution rule with transaction 0KEM and assigned it to the controlling area with active status"3" (Other transactions + cross-company (orders + billing doc.)).
Unfortunately, it doesn't seem to be called when I create a sales order.
Can you please confirm gthat 0KEM is the transaction to use even when we use New GL without EC-PCA?
Where should I put a breakpoint in order to trace the call to the substitution rule?
Thanks a lot in advance for your help.
Regards,
Simo

Difference between profit center in OKB9 and material master

Hello,
I have a small doubt over here in the profit center point of view.
We have created profit center 1200 and assigned the same in material master. Now while doing PO system threws error message like "Account 5005115 requires an assignment to a CO object Message no. KI235". To eliminate this error i have assigned Cost element(1001125) and Profit center(1200) in TC: OKB9, now system is able to post everything fine.
Here the issue " If i can change profit center in the material master say ex: 1201, system picks from the material master only then why assigned in the OKB9? while doing MIRO system updated in the 1201 profit center".
Could anybody update me why we need to assigned profit center in OKB9 and Material Master?
Thanks
anifi

Hi,
This is about co.code level field status and Transaction level field status. In OKB9 transaction profit center is maintained and it is getting picked up.
As per SAP if any transaction level field status is maintained it will overwrite the co.code level field status.
So, here when you are giving the input of Profit center in the material master itself it is overwritting the co. code level field of profit center. If nothing is given in material master, then by default OKB9 level profit center will be picked up.
Thanks,
Prithwiraj.

Profit Center population in the Vendor and Customer Line items

hello
our client is asking for getting profit center in the vendor and customer line items where in the view FBL5n and fbl1n we are not getting the profit center populated - in the new gl i understand that there is a standard report based on the gl account.
but our business is not satisfied with the report and expecting report at profit center level.
Can any one suggest any way of doing this.
regards,
Vijay

Dear Vijay,
Let me provide you my view of solutioning for this. This is an enahcement that needs to be done
1. You can get the profit center from the given vendor and customer line item at the time of posting, using an enahcement you will be able to capture it.
2. Existing the profit center field is not populated in the BSIK,BSAK,BSID and BSAD tables
3. Hence, in the same enhancement once you capture the profit center , you can write the code that profit center is updated in these tables also.
4. This will help you to do the vendor line item wise selection in the FBL1N, FBL5N profit center wise.
Constraints of this solution:
The only constraint remains where in the for a given document if there are multiple profit center, then the system will do the splitting profit center wise for a vendor line item, which will not populate the profit center in those tables as there is only one field available in the bsid etc.. tables.
This basically would be the one the soltuion where in as seeen from the end user ther eis no change in the front end interface , the way they are doing always they can do.
You need to also take care the % of document splitting means cross profit center postings /cross document splitting charactericstics postings and the volume involved in this. so that you can suggest this to your client.
Regards,
Bharathi.

Error Message no. MM214 while creating material master

Hi folks!!
While creating material master, when i fill the MRP controller field and press enter, I get the message...
The MRP controller 391 does not exist for plant
Message no. MM214
I have checked, the MRP controller is availble in Master Data for MRP Controller. And we have already created many material master with this MRP Controller.
What could be the possible cause for this error. Please help.
Best regards

Hi Qamar,
Please go thru the bellow threads,
Assignement of MRP controller to Plant
MRP CONTROLLER
MRP Controller
Re: MRP controller extension from plant 1 to plant 2
Thanks,
Swamy H P

Screen sequence error while creating material.

Respected Gurus,
While creating material, i am getting the following error:
The data screen descriptions are missing for screen sequence EH
(Message no. MM329)
Looks like screen set up issue.
How do I solve this??
Please help.
Jaideep

Jaideep,
Check in other logon language like EN or DE.
You might want to check with basis consultant if all text's are migrated into your logon language.
If the screens are not standard, texts might only exist in developer logon language.
Close message if solved.
regards,
Edgar

Problem while Creating MVLOG with synonym in Oracle 9i:Is it an Oracle Bug?

Hi All,
I am facing a problem while Creating MVLOG with synonym in Oracle 9i but for 10G it is working fine. Is it an Oracle Bug? or i am missing something.
SQL> select * from v$version;
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE    10.2.0.1.0      Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SQL>
SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
Table created.
SQL> create materialized view log on t;
Materialized view log created.
SQL> create public synonym syn_t for t;
Synonym created.
SQL> CREATE MATERIALIZED VIEW MV_t
2 REFRESH ON DEMAND
3 WITH PRIMARY KEY
4 AS
5 SELECT name,id
6 FROM syn_t;
Materialized view created.
SQL> CREATE MATERIALIZED VIEW LOG ON MV_t
2 WITH PRIMARY KEY
3   (name)
4    INCLUDING NEW VALUES;
Materialized view log created.
SQL> select * from v$version;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
PL/SQL Release 9.2.0.6.0 - Production
CORE    9.2.0.6.0       Production
TNS for Solaris: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production
SQL>
SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
Table created.
SQL> create materialized view log on t;
Materialized view log created.
SQL> create public synonym syn_t for t;
Synonym created.
SQL> CREATE MATERIALIZED VIEW MV_t
REFRESH ON DEMAND
WITH PRIMARY KEY
AS
2    3    4    5 SELECT name,id
FROM syn_t;   6
Materialized view created.
SQL> CREATE MATERIALIZED VIEW LOG ON MV_t
WITH PRIMARY KEY
(name)
INCLUDING NEW VALUES; 2    3    4
CREATE MATERIALIZED VIEW LOG ON MV_t
ERROR at line 1:
ORA-12014: table 'MV_T' does not contain a primary key constraintRegards
Message was edited by:
Avinash Tripathi
null

Hi Nicloei,
Thanks for the reply. Actually i don't want any work around (Creating MVLOG on table rather than synonym is fine with me) . I just wanted to know it is actually an oracle bug or something else.
Regards
Avinash

Unable to update profit center or plant code in the customer line item

Hi,
We require the profit center and plant code and division in FI
documents (Posted through billing document or through direct FI entry)
We are unable to input plant or profit center in the customer line item
while using F-21 or any other FI transaction
The plant and profit center is not appearing even in customer line item
in RV document (From SD billing)
We have made the Field status group as optional for the reconcilation
accounts.
Regards
Sembian

Hi
Profit center / cost center are generally entered in revenue & expense line items (P&L items). Customer / vendor master and line items are balance sheet items which will not show profit / cost centers.
Regards
Neeraj

Profit Center wise value of material consumption & purchases report

Dear Frinz,
Can anybody revert with t-code/table from which I could be able to see purchase & consumption of material / material group Profit Center wise, from the first day of mat procurement to till date.
Profit Center wise value of material consumption & purchases report
=-=
Pradip Gawande

Hi,
You can use T.Code: KSB1 (Display Actual cost line items) in which you can restrict the report by providing the material consumption cost elements and don't give any cost center, which displays all the cost center for the given cost element.
Regards

Profit Center Mandatory when creating Cost Center

Hi,
How do we make Profit Center Mandatory when creating Cost Center, I remember doing this and cannot recollect as to how i did this in a previous version 4.0b.
Pls advise how to do the same in ECC 5.0 and higher..
Thanks,
Praveen

Dear Praveen ,
First u will creat PCA then u will acitvit .
while creating cost center u have to give profit cnenter accounting .
ur not enter pca aacoutno then it will give the error message account is activted but profit cneter account not given
Regards
Suresh

Imp of division while creating Material mm01

hi guys
While creating material (mm01) there is option of puting Div ,and if v put com div insted of actual div in material ,Now while creating sales order if v put same material it gives option of various sales area .and we can choos any division along with com div also .
now my question is when 1 product is assigned or related to 1 division only then wht use of creating com division, wht is d purpose ,
while creating material specific div we shd put insted of com div
plse explain me if i am wrong
and wht use of creating com div here
thnx
point ll be rewarded if ans is helpful

The common division is ideally used for all the products where you do not need to restrict the same to any Sales areas.
If you want a product to be funcuanally operating in all the sales areas of your comapny code then you assign the same to the Common DIv.
regards,
Amlan

Error while creating material

I got an error while creating material "Material does not exist or not activated". Can anybody help me.
BR//
Irf

hi
I think you have posted your question in wrong place.
Can you please make your question more clear.
regards!
ramesh
Edited by: Ramesh kumar.p on Feb 22, 2010 12:48 PM
Edited by: Ramesh kumar.p on Feb 22, 2010 12:50 PM

Profit Center Disabled while Creating Material with Custom Trnx

Similar Messages

Maybe you are looking for