Profit center does not exeist

Hi
We have received stock from K. C. Shah & Sons against P.O. No. 4500592514 dtd. 23.04.2007 Invoice no. 16 dtd. 14.05.2007 total 216 pcs but we are getting error in zpgr inward, error as " Profit center 1001/865401 does not exist for 16.05.2007". Please do the needfull for the same & reply immd.
If profit center does not exeist in ke53 what i want todo further steps.. for this problem.
Thank you
Anil

Hi
If profit center does not exist and you require and know that this is the right profit center then you need to create this profit center with the proper validity date i.e before 16.5.07.
If you think the profit center number shown is wrong then you need to cahneg the same in the material master assignment with the profit center which has a proper validity date.
Anand

Similar Messages

Error : Profit Center does not match with Business Area. Message no. ZGLTFI

Hi Everyone,
Error occurs when doing inbound PGR. Processed done so far are the following:
Normal PO created & released.
Inbound created
Transfer order created and confirmed.
When doing PGR via VL32N > click Post Goods Receipt error occurs
Profit Center does not match with Business Area
Message no. ZGLTFI0001031
Checked already in KE53 the Profit Center used was assigned to the Co. Code used in the PO.
The same Profit Center was maintained in material master.
The Plant used was assigned to proper division and business area.
Any other ways to check?
Btw not only in Inbound PGR the error occurs .. also happened in MIGO and MB1C.
Tried to do other transaction involing the material, plant and profit center all give the same error.
Any info shared is much appreciated.
Thank you.

this error is not a SAP standard error, it is an own message class (ZGLTFI0001), so it must be issued from a validation or user exit. Please find the user exit, or talk to FI Team and ask what they check

Profit Center does NOT exist on 08/24/2010 (Message KM700)

Hello,
I am using resource related billing.
I am adding a Contract Line Item to an existing contract.
In this Contract Line Item I am entering a wbs element for whichc the associated profit center has an effective date
of 01/01/2011.
The Contract Header has a document date of 08/24/2010
After entering the wbs element in the new contract line and hitting enter I receive the below warning message:
Profit center ###/##### does not exist for 08/24/2010
Message no. KM700
###/##### = Controlling Area/Profit Center
Is there a setting that can be switched off so that the warning is NOT displayed ?
Thanks
Ermanno.

If it is warning message, the user can leave as it is. If it is error then in t.code KE52, you can change the validity period by clicking the change validity period button. Change here validity period from date 08/24/2010, thereby you can avoid this message.
Does this answer your question? If not why you want to remove the warning message? It looks it is standard message, used by more than one program.
Regards,

Profit center is not found

Hi masters,
While doing MIRO, we are getting the error message like Profit center c.code/profit.center does not exist .
I have cheked in KE53 profit center is created and validity is also 01.01.2011 to 31.12.9999. Although i am getting the error message. Please suggest me on this.
Thanks
MDK

Ideally, this should have been posted in Financials forum.
Coming to the issue, check the following notes which may help you
1) Note 204787 - KM026: Profit center &1/&2 does not exist for &3
2) Note 978159 - Problem with profit center determination
thanks
G. Lakshmipathi

Cost Center does not match with the profit center

Hi Gurus,
Can you resolve my issue?
"Cost center does not match the respective profit center of the sales document for freight revenue - Doc Type: RV ( Billing Doc Transfer) Normal Document"
I request you to all, kindly solve my issue.
Thanks with Regards,
Bala

It appears that you have assigned a cost center to freight cost element and the profit center assigned to the cost center is different from the one derived by the document. As result this message.
Check the derivation rule for profit center
Regards
Rakesh Pawaskar

Profit center is not read in BAPI_ACC_DOCUMENT_POST

Hi Experts,
I have enabled profit center for an expense account,
in BAPI_ACC_DOCUMENT_POST it keeps stated the error that profit center is not read. Is there any other way to use this BAPI with the profit center enabled for the expense account?

Hi Anup,
The error does not reflect on BAPIACGL09-PRCTR. As i also activated the AP's special GL account to be profit center required. The error reflects in the special GL acct, unable to read profit center for the special GL account.
Error msg: Field Profit Ctr is a required field for G/L account FNW 15530
GL 15530 is the special GL for AP account: 200994

Profit Center is not appearing in MIRO

Hi,
I have raised purchase order for asset. While doing MIRO with reference to purchase order profit center is not appearing. I check MIGO document profit center is appearing in MIGO document.
I have maintained profit center in Material Master.
OKB9 setting is required for ASSET??????
Please help
Regards
Amit

Hi
We are using ECC 6 with document splitting. I have check field status for GL . Profit center is already optional field
Regards
Amit Hingne

Project with profit center was not created for entire period

Hi everybody,
I need a help with a problem here.
The alert mesage "project with profit center was not created for entire period" was displayed.
Then I searched for the creation dates and the profit center was created before the project gets its firsts postings. Therefore, some line itens don't exist in profit center (ledgers).
My two questions:
The first one, is it possible to input line itens in a retroactive way?
Everytime I need to use the project master data this alert is displayed. How can I fix avoid this message?
Thanks,

Hi,
Regarding your issue, it is theoretically possible to reverse all settlements up to the start of the project and then to settle again it
is a must to check in standard if the profit center is valid from the project start date onwards.
Check the attached note 1048945.
The system generates error message KM700 ('Profit center <PRCTR> does not exist for <date>') when you enter a profit center on a project definition if the profit center is not valid in the entire period between the basic start and the basic finish date of the project definition . However, only one warning message should only be generated in this case.
regards
Waman

Profit Center is not getting captured in Vendor line item from MIRO.

Dear Friends,
Profit Center is not getting captured in Vendor Line Items from MIRO Transaction for some New Business Users, where as for Old Users profit center is getting generated at Vendor Line Item.
We have provided the same authorization of old Users to new business users. (i.e. New user is a copy of old user)
Please help us how we can the get Profit Center in all transactions will be processed by New Business users.
I think we need to maintain user based authorization to get the Profit center in vendor Line items processed from T.Code:MIRO in SAP.
Looking forward for your kind cooperation in this matter
Thanks & Regards,
Naveen Kumar.

Hello Naveen,
I am not very sure about your query, as you might be knowing that the Profit Center is only updated in New GL tables (FAGLFLEXA, FAGLFLEXT) and hence the Vendor relavant tables would not.
The profit center information in the split lines or the line of the 'General Ledger View' are only displayed within transaction FAGLL03 which read the 'new' table for the NewG/L.
About profit center wise reporting, when New GL is active Please review attached consulting SAP note:
- 826357 Profit Center Accounting and new general ledger in
I hope this helps. If not, please provide an example of your requirement.
Thanks and regards,
Suresh Jayanthi.

Profit Center is not updating in Vendor line item

Hi Experts,
For my GL postings in F-43, F-41, F-53 ,F-54 and F-28 the 1st line item corressponds to Vendor or Customer, the profit center is not updaitng the values and shows nill. We have given check in Exit and Substitution but its not updating in BSEG structure as its functioning like loop.
Pls advise, how to resolve it.
thanks & reagrds
sankar.

Hi Bharathi,
thanks for your prompt reply.
But as per my Client requirement, we need to pass the profit center values to the vendor/customer line items also.In such case, what' s the solution?
Pls advise.
regards
Sankar/Brahma

PO Profit Center is not coming in Goods Receipt

Hi Gurus,
1. We are creating a PO with Account Assignment WBS and in line item we are able to see the Profit Center and this purchase order Account Assignment Category - Q (Proj. make-to-order).
2. In material master we dont have any Profit Center
3. In WBS we have Profit Center
4. When we do the GR - Profit center is not coming.
Material Account Dr   xxxxx (profit center is updating)
    To GR/IR Account                 xxxxx (There is no profit center)
And when we do the Invoice Receipt
GR/IR Debit xxxxx (profit center is updating)
Vendor Credit    xxxxxx
At the same time when we create the PO with Account Assignment Category -P (Project) we are getting the Profit Center in both line items
Material Account Dr   xxxxx (profit center is updating)
    To GR/IR Account                 xxxxx (profit center is updating).
How Purchase Order Proft Center is determining into Goods Receipt.
Is there any different Rule for Account Assignment Category -P (Project) & Q (Proj. make-to-order)
Thanks
HS

Hi Alex,
Thanks for your reply.
My question is for Account Assignment Category P (Project) Profit Center is updating. But AAC: Q (Project make order) is not updating the Profit center in Goods Receipt.
Account Assignment Category -Q
Material Account Debit (Profit center updating)
GR/IR Account Credit (Profit center not updating)
For Account Assignment Category - P (Projects) for both line items Profit center updating,
Material Account Debit (Profit center updating)
GR/IR Account Credit (Profit centerupdating)
Thanks
HS

Error Message-- For Balancing field "Profit Center" is not filled

Hi All,
When I do Shipment Start get Error-Message for Balancing field "Profit Center" is not filled!
A PGI for the DNXXXXXXXX is not possible!
Can u please help me how to resolve this issue ?
WM Baby

Hi,
AS per configuration , there is prifit centre assignment .Enter the profit centre in the field of profit centre by the help opf F4.
Regards,
Andra

HP Officejet Pro L7590 Printer - HP Solution Center does not work

I am not able to get the Solution Center suite to work because the installation has an error. I am using Windows 7 Home Premium. The printer I am installing is the HP Officejet Pro L7590.
If I go to Devices and Printers and add the printer. The driver Windows 7 driver would work, it would detect the printer and the test page and everything would be fine.
However, if I install using the software provided by HP for the L7590 it would result in an error and it would not work.
The failed driver installation is only from installing the full bundle software provided by HP, if by itself through Windows 7 it would be fine.
Because of the failed installation using HP software the HP solution center does not work.
In Devices and Printers, the printer has the yellow exclamation point requiring troubleshooting, I click on troubleshoot and no device drivers were found. In addition, I could not remove the printer. Before installing the HP software, I could successfully install the printer and there would be a green checkmark, and there would be an option to remove the printer. This leads me to believe HP has a faulty software bug that is causing the error.
I am suppose to use the HP add a printer shortcut that populated on my desktop after installing the software, the first time it would show the failure to successfully install the driver, afterwards it would not even detect my printer if it is plugged in. If I remove the usb and reinsert it, the Windows would just show the failed driver. I repeat, it failed after I install the software, it works fine without. The primary reason I want the software is to use the scanning feature.

Hello NickRT, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having software installation issues. i would like to try and assist you.
I would suggest Uninstalling the Printer Software.
Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows.
Once the computer is in clean boot mode, I would reinstalling the HP Officejet Pro Full Feature Software and Driver.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Profit Center Field Not deriving during Asset Postings

We are using document splitting functionality with profit center mandatory for any kind of posting.
Scenario-Asset purchase through PO:
1.Purchase Order -created
2.At goods receipt error is coming balancing filed is not filled (bcoz asset is not a material), for materials we are giving profit center. in the asset master i assigned cost center, still profit center is not deriving.
Scenario-Asset Purchase from vendor
purchasing asset directly from vendor through F-90, against asset line item we have to assign profit center. Cost center & profit center is coming in display mode. in the asset master i already maintained cost center, still profit is not deriving.
I already done config for field status asset account number (G067) andPosting Keys (70,75). I also checked note no.684659.
how profit center will be derived for any kind of asset postings.
Thanks
Sai

I think you might be using the account assignment category 'A' in the Purchase order for asset purchase. Please check the IMG for account assignment category thru transaction 'OME9'. For the relevant account assignment category you are using in the PO, tick the checkbox against 'Derive acct.assgt.'
That should solve your problem.
Regards,

Cost Center does not exist for a particular period - Solution

We have encountered an error in the subject,
COST CENTER does not exist for a particular period
Solution:
1) Either extend the Posting period for the invoicing date
2) Or enter the Cost Center as PO number in Sales Order
Please do add your comments if there are different ways to solve this error

The Post contains a solution

Profit center does not exeist

Similar Messages

Maybe you are looking for