Profit center Hierarchy in query selection varaiable
Hi,
I am using Profit center Hierarchy node in my query selection. does it make the query execution slow.
Thanks
Madhu
my query is excuting very fast in Developement where as in QAS it is excuting very slow.
i don't know exactly what is the reason.
the query is build on Inventory Cube ,
some people told me that when non-cumulative keyfigures and profit center hierarchy node used as selection the query is going to execute slow.
i don't know exactly,if that is the case it has to apply for the developement system also.
can anybody face this pbm
Thanks
Madhu
Similar Messages
-
Profit Center Hierarchy is not updating in Variable
HI Guru's,
Profit Center Hierarchy is not updating in Variable .
We have 3 new profit center added of which i have updated the master data ie, attr, txt, and hierarchy and Txn data. Where after updating i can find the thing updated but when i execute the report in the variable i dont find the updated profit center.
Please guide
PrasadBut just to update you that we don't have data for the new profit centerin R3. Is it because of this i don't find the new profit centers in
Variable screen ( though i can see in Query Designer)
Please guide -
Structure view "Profit center hierarchy" for Information system
Hi Experts
The structure view "Profit center hierarchy" is not available in standard system. I have created a new key with assignement of PS Hierarchy type '2'.
But iam getting below message when I use this new structure view:
Alternative hierarchy could not be determined
Message no. OK032
Diagnosis
You attempted to structure your project elements according to an alternative hierarchy (profit center, cost center or summarization hierarchy). The alternative hierarchy could not be read.
System Response
The system uses the "Work breakdown structure" view.
Any suggestion?
warm regards
ramSivaOk lets start from basics
go to CN41 and enter a project with std PS info profile 000000000000001
if you click o the DB profile you will have basic setting 000000000000001 etc
this gives us the project structure
Now in transaction OPUR create a view for PC hierarchy
Z00000000001 - whatever description
select PS hier type 2 - Profit Ctr via set
I think you have done this
In this configuration there is a group name - you need to enter the profit centre hierarchy group name from your system
this group must exist in your system check using transaction KCH3 to display group - if this is not entered correctly you will get the exact error you have got - I have been able to replicate in my system
Now run CN41 change DB profile project view from 00000000001 to Z0000000001 -
Profit Center Hierarchy Maintenance
Hello
As part of a project we need to transfer an existing Profit Center Hierarchy (including all Profit Center groups and Profit Centers) to a different Controlling Area. The hierarchy in question contains over 2500 Profit Centers and we would like to avoid doing this manually, to reduce both time and margin for error.
We know that we can use KCH1 to copy the Profit Center Groups to the new Controlling Area, using the original Controlling Area as a reference, but this does not copy across the Profit Centers master data.
Master Data transaction KE55, does not allow Controlling Area to be amended.
Questions:
- Is there a way to transfer/copy the complete hierarchy (including Profit Centers) to a different Controlling Area?
If we use KCH1 - how can we copy/reassign the Profit Centers to the new Controlling Area?
Any ideas for this would be greatly appreciated
ThanksHi
It can not be fully the way you like...
You can go to KCH4 and select your Prof Ctr Hie.. Click on Extras > Export... This would create a text file...
Create Std Hie with same name in new contr area and SAVE.. Then click on Extras > Import.... This would create the Hie Structure and also the profit center names under it.. But, as such the Prof Ctrs wont be created...
You need to create them again using KE51... Ideal way would be to create it using reference of the same profit center (LSMW)
Regards
Ajay M -
How to load Profit Center hierarchy from R3 to BW
Hi people,
Sorry, but I already saw some documentations here and I couldn´t solve my problem.
I need to load Profit Center Hierarchy from R3 to BW.
I already have the InfoSource 0PROFIT_CTR activated and I would like to know what are the steps to load the "Standard Hierarchy" that we have in the transaction KCH6N in R3.
I tried to create the Infopackage based on 0PROFIT_CTR_HIER and when I tryed to schedule, the system asked me the file name to put in the "external data", but I don´t have file to load, I need to load de hierarchy directly from R3.
Help me please,
Thanks,
Rosana.U have to activate datasource 0PROFIT_CTR_0106_HIER in R/3 system and replicate that to BW.
And u should install standard transfer rules (0PROFIT_CTR_0106_HIER from BI CONTENT) in BW system.
Create infopackage to load hierarchy.. In Infopackage properties, 'Hierarchy Selection' tab, click 'Available Hierarchies from OLTP' and select ur profit center hierarchy.
There is no difference loading hierarchy data in BW 3.5 and BI 7.0 -
Profit Center Hierarchy Variable-Prompt
Hello,
I'm using a heirarchy variable in BEx 7.0 query designer that is based on a profit center hierarchy object. When I execute the query, and I get prompted to choose nodes of the hierarchy, I'm only able to "include" nodes but I'm not able to "exlcude" nodes. Any ideas?
Thanks!
MichelleRemove the varaible for the hierarchy and try executing it.
If you remove the Hierarchy variable from the query and execute the query ,user should only get the nodes to which he is restticted it could be 1 node or multiple.
Hope you had kept Type of Authorization = " 1" Subtree below nodes in RSECADMIN of the auth object for profit center for the particular node
Hope it Helps
Chetan
@CP.. -
How do I create a BW hierarchy from an R/3 profit center hierarchy?
I am trying to create a profit center hierarchy in BW using a profit center hierarchy from R/3. I know there is a way to do this, I just can't find the way.
Thank you for your help.Hi Aaron,
you have to activate the specific datasource 0PROFIT_CTR_0106_HIER in R/3 transaction RSA5. After doing this, replicate your source system in BW anf then assign the datasource to 0PROFIT_CTR infosource, create an infopackage and finally load your hierarchies !
Hope it helps (and don't forget to assign some points by clickin'on the star to the contributors that will help you !).
Bye,
Roberto -
RE: Profit center hierarchy
Hi Guru's
Can any one explain to me about Profit Center hierarchy, Where to create that one, where i need to activate, I'm trying to create Tcode KCH1, KCH5N.
-Please explain to me breifly, urgent.
- Points will assing,
thanks
venkat.Hi Venkat
You have to first assign the name of the Profit Center Standard Hierarchy in OKE5. Then come to KCH1 and create the standard hierarchy with the same name that you have given in OKE5. If it helps, plz assign points.
Regards
Rajaram -
Profit Center Hierarchy Level in ABAP-HR
I am working on an ABAP-HR report related to Organisation management.
There is a requirement wherein I need to retrieve data from a Profit Center Hierarchy Level .Can u please advice me on this.
Thanks in advance,
Raja.Hi ,
(i_name is the entered profit center group name)
Get the internal name of the entered profit center hierarchy.
CALL FUNCTION 'G_SET_LIST_SELECT'
EXPORTING
SETCLASS = '0106'
SHORTNAME = I_NAME
KOKRS = 'MIT '
KTOPL = 'HEUS'
TABLES
MATCHING_SETS = T_SETLIST.
IF T_SETLIST[] IS INITIAL.
MESSAGE E002(SY) WITH 'Profit Center group does not exist'.
EXIT.
ELSE.
READ TABLE T_SETLIST INDEX 1.
ENDIF.
Get the entered profit center hierarchy info.
CALL FUNCTION 'G_SET_TREE_IMPORT'
EXPORTING
SETID = T_SETLIST-SETNAME
TABLES
SET_HIERARCHY = T_SETHIER
SET_VALUES = T_SETVALUES
EXCEPTIONS
SET_NOT_FOUND = 1
ILLEGAL_FIELD_REPLACEMENT = 2
ILLEGAL_TABLE_REPLACEMENT = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE E002(SY) WITH 'Profit Center group does not exist'.
EXIT.
ENDIF.
or try one of these
FC_PRCTR_HIERARCHY
TXW_EXTRACT_CO_PCTR_HIERARCHY
Regards,
pankaj singh.
Message edited by pankaj singh -
Authorizations for Profit center in a query for a TEST user
Dear SAP BI Gurus
I have a query which has to be tested by the different user based on the region & the profit center that they belong to in SAP BI 7.0
for this i have to create a user id for the test user under he/she should be able to view only his/her profit center data.
The following are the steps that i tried out.
1.created a role .
2. in the change role - authorization , i have added authorization object "ZPROFIT" to the RSR . & restricted the ZPROFIT for the given values of the profit centers.
3. Added this role to the User ID.
But still the user is able to view all the profit center in the query.
This is bugging me up.....
Can anyone help me out.
Best Regards,
RameshDear chetan/ravi
i did create all the authorization objects & filled in the values in them.
Also a authorization variable has been created in the Query.
But i dont know how this variable has to be linked to the Auth Objects in Rsecadmin.
Can you explain me the steps involved in it.
Best Regards,
Ramesh -
Copy cost center hierarchy to profit center hierarchy: is this possible?
Hi,
I would like to know or I can copy my standard cost center hierarchy to my standard profit center hierarchy. If so, how to proceed?
Thank you in advance,
Eric van Zundert.
Ps. We do not have enterprise organisastional active.Hi Eric,
No standard tool exists for this operation. However, if you really prefer to do it manually, you can pull a trick. You can export your cost centre hierarchy to TXT file, correct there certain parameters (change BCCSS to BGLPCT, etc.) and then import it as profit centre hierarchy.
Regards,
Eli -
Need profit center HIERARCHY FM
Hello Experts,
I know the profit center and profit center group. Could you tell me which function module i have to use to get the complete hierarchy?
Regards,
AmitHi,
<i>(i_name is the entered profit center group name)</i>
Get the internal name of the entered profit center hierarchy.
CALL FUNCTION 'G_SET_LIST_SELECT'
EXPORTING
SETCLASS = '0106'
SHORTNAME = I_NAME
KOKRS = 'MIT '
KTOPL = 'HEUS'
TABLES
MATCHING_SETS = T_SETLIST.
IF T_SETLIST[] IS INITIAL.
MESSAGE E002(SY) WITH 'Profit Center group does not exist'.
EXIT.
ELSE.
READ TABLE T_SETLIST INDEX 1.
ENDIF.
<i>
Get the entered profit center hierarchy info.</i>
CALL FUNCTION 'G_SET_TREE_IMPORT'
EXPORTING
SETID = T_SETLIST-SETNAME
TABLES
SET_HIERARCHY = T_SETHIER
SET_VALUES = T_SETVALUES
EXCEPTIONS
SET_NOT_FOUND = 1
ILLEGAL_FIELD_REPLACEMENT = 2
ILLEGAL_TABLE_REPLACEMENT = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE E002(SY) WITH 'Profit Center group does not exist'.
EXIT.
ENDIF.
Regards
Sudheer -
Loading profit center hierarchy into 0plant
Hi,
I need to load 0proft_ctr hierarchy into 0plant. Can anyone please give me step by step solution ?
I have generated export datsource for 0profit_ctr.
Then I am creating transfer rules on exported datsource with 0plant. Here what infosource & datasource I have to assign ? profit center hierarchy datasource is not available.
Pleasse tell me if I am wrong and give me step by step solution.
Gud points will be provided.this will help http://forums.sdn.sap.com/thread.jspa?threadID=1551111
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c08b1f70-6fb1-2b10-97a5-df4c503e03cb?QuickLink=index&overridelayout=true
http://forums.sdn.sap.com/thread.jspa?threadID=1362783 -
Alternate profit center hierarchy
Hi All
How to maintain alternate profit center hierarchy ?Hi ,
While maintaining controlling area in OKKP in right bottom there are two tick boxes for Cost center and Profit center.Click on that .While creating standard hierarchy sytem will create alternate hierarchy side by side.
Thanks & Regards
Deepa -
Profit center hierarchy and cost center hierarchy
Hi
What are the things we have to consider to create Profit center hierarchy and cost center hierarchy and what is the need to assign profit center hierarchy to profit center and cost center hierarchy to cost center. What levels does this fall into? Can some one please guide me.
Thanks.As you would for any other infoobject
Activate the business content hierarchy datasources on R3 for cost centre and profit centre
Go into BW - replicate the metadata
Then just connect via transformations or transfer rules the datasources to yoru infosources or master data objects
Create an infopackage per hierarchy!!!!! - press the button available hirachies from OLTP - click the one you want on the left - fire it off
Then repeat new infopackages for all hierachies
Maybe you are looking for
-
My files on pages cannot be opened, when I click on them appear" file impossible to open". All is.saved.on iCloud and iCloud drive and on my devices is the same All iCloud systems works properly, also WiFi and devices and the system Help me please
-
How do you import a non iphoto pic into imovie?
There seems to be no way of getting a photo into iMovie except by placing it in iPhoto first. This is cumbersome if all your doing is pulling something from a drive. There is no File, Import like there is for movies. If you drag and drop the photo fr
-
How to use apple map ?...
Dear IOS developer, i want to create some location based apps and i want to use apple map apps to view map, so i want my apps switch to apple map....it is possible? and how i can do that? .... Thanks
-
Anyone deleted their calendar by mistake? how do I retrieve it?
anyone deleted their calendar by mistake? how do I retrieve it?
-
Hello All, After a lot of searching and I finally decided on the SAP module that I want to do. Honestly, there are so many modules in SAP, the more i research, the more confused i become. So since I am more into development, i chose ABAP. The certifi