Profit Center is not reading the data...
hi all,
When I assigned each Cost center with a profit center and posted costs through in FB50 to cost centers and was trying to check the data in KE5Z, system displaying the message that 'No data Read'.....
Why it is soo..
Thank you..
Suresh
Hi Karhik,
Thank you for that Trans Code... thers it is working...
but why not in KE5Z ?? I was specifying there doc no...
Anywys.. Thank you Karthik..
Byee.. Suresh
Message was edited by:
Suresh Kumar
Similar Messages
-
Profit center is not read in BAPI_ACC_DOCUMENT_POST
Hi Experts,
I have enabled profit center for an expense account,
in BAPI_ACC_DOCUMENT_POST it keeps stated the error that profit center is not read. Is there any other way to use this BAPI with the profit center enabled for the expense account?Hi Anup,
The error does not reflect on BAPIACGL09-PRCTR. As i also activated the AP's special GL account to be profit center required. The error reflects in the special GL acct, unable to read profit center for the special GL account.
Error msg: Field Profit Ctr is a required field for G/L account FNW 15530
GL 15530 is the special GL for AP account: 200994 -
PCI6534 not reading the data correctly
Hi,
I am using PCI6534 to read the digital data from out of ADC. I am using port 2 as the input port and PFI3 as the external trigger ( given to the clock of the ADC). I am not able read the data properly ( missing the first few bits of data).Hi,
I am using PCI6534 to read the digital data from out of ADC. I am using port 2 as the input port and PFI3 as the external trigger ( given to the clock of the ADC). I am not able read the data properly ( missing the first few bits of data). -
Profit Center Report not include the Invoices entry
Hi Expert,
I want the report of my profit center which will show profit centre details including the dimension.
I have run the following report but not fulfill the requirements
1.The u201CProfit centre reportu201D in this report only u201CJEu201D is comes in report & Invoices post for the u201CProfit centre(Dimension1, Dimension2,Dimension3) u201Cis not included in that report.
2.The u201CGeneral ledgeru201D report it will give the details of invoices but ,it is not showing the Dim1,Dim2,Dim3 in the available column of report.
Plese help me on this.Sap version 8.8 patch 15.Hi,
You can create your own report by Crystal Report or query report.
Thanks,
Gordon -
File Adapter fixed length Native format Builder schema not reading the data as expected
Hi
We are using a File Adapter for reading a fixed length data. Using the schema we are able to read the file but the places are incorrect. Following is the schema that we used and the payload.
At the last you can find our expected read of data how it should be.
With out the record type code we are not even reading the file. Hope there should be a correction in the schema. Please suggest
Schema that we are using:
<?xml version= '1.0' encoding= 'UTF-8' ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
xmlns:tns="http://xmlns.energy.com/CreateReturnedItemGENVNDRPReqABCSImplFileAdapterReadReturnedItem"
targetNamespace="http://xmlns.energy.com/CreateReturnedItemGENVNDRPReqABCSImplFileAdapterReadReturnedItem"
elementFormDefault="qualified" attributeFormDefault="unqualified" nxsd:version="NXSD" nxsd:stream="chars"
nxsd:encoding="US-ASCII">
<xsd:element name="GENVNDRReturnedItem">
<xsd:complexType>
<xsd:sequence minOccurs="1" maxOccurs="unbounded" nxsd:choiceCondition="fixedLength" nxsd:length="1">
<xsd:element name="HeaderRec" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:startsWith="1">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="RecordTypeCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="1" nxsd:padStyle="tail"/>
<xsd:element name="PriorityCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="2" nxsd:padStyle="tail"/>
<xsd:element name="ImmediateDstn" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="10" nxsd:padStyle="tail"/>
<xsd:element name="ImmediateOrgin" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="10" nxsd:padStyle="tail"/>
<xsd:element name="FileCrDt" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="6" nxsd:padStyle="tail"/>
<xsd:element name="FileCrTm" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="4" nxsd:padStyle="tail"/>
<xsd:element name="FileIdMdfr" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="1" nxsd:padStyle="tail"/>
<xsd:element name="RecSize" type="xsd:string" nxsd:style="fixedLength" nxsd:length="3"
nxsd:padStyle="tail"/>
<xsd:element name="BlockingFctr" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="2" nxsd:padStyle="tail"/>
<xsd:element name="FormatCd" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="1" nxsd:padStyle="tail"/>
<xsd:element name="ImmediateDstnNm" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="23" nxsd:padStyle="tail"/>
<xsd:element name="ImmediateOrginNm" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="23" nxsd:padStyle="tail"/>
<xsd:element name="RefCd" type="xsd:string" nxsd:style="fixedLength" nxsd:length="8"
nxsd:padStyle="tail"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="BatchHdrRec" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:startsWith="5">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="RecordTypeCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="1" nxsd:padStyle="tail"/>
<xsd:element name="ServClsCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="3" nxsd:padStyle="tail"/>
<xsd:element name="CmpnyName" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="16" nxsd:padStyle="tail"/>
<xsd:element name="CmpnyDiscretionaryData" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="20" nxsd:padStyle="tail"/>
<xsd:element name="CmpnyIdfn" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="10" nxsd:padStyle="tail"/>
<xsd:element name="StdClsCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="3" nxsd:padStyle="tail"/>
<xsd:element name="CmpnyEntryDesc" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="10" nxsd:padStyle="tail"/>
<xsd:element name="CmpnyDescDate" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="6" nxsd:padStyle="tail"/>
<xsd:element name="EffEntryDate" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="6" nxsd:padStyle="tail"/>
<xsd:element name="SettlementDate" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="3" nxsd:padStyle="tail"/>
<xsd:element name="OrgntrStatusCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="1" nxsd:padStyle="tail"/>
<xsd:element name="OrgntrBatchCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="15" nxsd:padStyle="tail"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="FileControlRec" nxsd:style="terminated" nxsd:terminatedBy="${eol}"
nxsd:startsWith="9">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="RecordTypeCode" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="1" nxsd:padStyle="tail"/>
<xsd:element name="BatchCnt" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="6" nxsd:padStyle="tail"/>
<xsd:element name="BlockCnt" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="6" nxsd:padStyle="tail"/>
<xsd:element name="EntryAddendaCnt" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="8" nxsd:padStyle="tail"/>
<xsd:element name="EntryHash" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="10" nxsd:padStyle="tail"/>
<xsd:element name="TtlDbtEntryDlrAmt" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="12" nxsd:padStyle="tail"/>
<xsd:element name="TtlCrdtEntryDlrAmt" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="12" nxsd:padStyle="tail"/>
<xsd:element name="Reserved" type="xsd:string" nxsd:style="fixedLength"
nxsd:length="39" nxsd:padStyle="tail"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
Sample data:
1011390714890 0910000191406110449A094101MCSCLDA_TESTIN
XPLLS KNRGO CNNK
5200MCSCLDA_TESTIN e-Bill
2390714890TELe-Bill
1406100001091000017000001
6262759774891010000074743
0000033793102651-013 U HOLBACH KARLA & JAMES 1091000013925011
799R01091000013925011
27597748
091000010000001
820000000200275977480000000337930000000000002390714890
091000010000001
9000060000025000001200995048661000001265867000000000000
Read File receive Activity:
<GENVNDRReturnedItem>
<HeaderRec>
<RecordTypeCode>0</RecordTypeCode>
<PriorityCode>11</PriorityCode>
<ImmediateDstn>390714890</ImmediateDstn>
<ImmediateOrgin>0910000191</ImmediateOrgin>
<FileCrDt>406110</FileCrDt>
<FileCrTm>449A</FileCrTm>
<FileIdMdfr>0</FileIdMdfr>
<RecSize>941</RecSize>
<BlockingFctr>01</BlockingFctr>
<FormatCd>M</FormatCd>
<ImmediateDstnNm>CSCLDA_TESTIN X</ImmediateDstnNm>
<ImmediateOrginNm>PLLS KNRGO CNNK</ImmediateOrginNm>
<RefCd></RefCd>
</HeaderRec>
<BatchHdrRec>
<RecordTypeCode>2</RecordTypeCode>
<ServClsCode>00M</ServClsCode>
<CmpnyName>CSCLDA_TESTIN e</CmpnyName>
<CmpnyDiscretionaryData>-Bill 2</CmpnyDiscretionaryData>
<CmpnyIdfn>390714890T</CmpnyIdfn>
<StdClsCode>ELe</StdClsCode>
<CmpnyEntryDesc>-Bill</CmpnyEntryDesc>
<CmpnyDescDate>1</CmpnyDescDate>
<EffEntryDate>406100</EffEntryDate>
<SettlementDate>001</SettlementDate>
<OrgntrStatusCode>0</OrgntrStatusCode>
<OrgntrBatchCode>91000017000001</OrgntrBatchCode>
</BatchHdrRec>
<FileControlRec>
<RecordTypeCode>0</RecordTypeCode>
<BatchCnt>000600</BatchCnt>
<BlockCnt>000250</BlockCnt>
<EntryAddendaCnt>00001200</EntryAddendaCnt>
<EntryHash>9950486610</EntryHash>
<TtlDbtEntryDlrAmt>000012658670</TtlDbtEntryDlrAmt>
<TtlCrdtEntryDlrAmt>00000000000</TtlCrdtEntryDlrAmt>
<Reserved></Reserved>
</FileControlRec>
</GENVNDRReturnedItem>
Expected Read data how we are looking:
<GENVNDRReturnedItem>
<HeaderRec>
<RecordTypeCode>0</RecordTypeCode>
<PriorityCode>11</PriorityCode>
<ImmediateDstn>39071489</ImmediateDstn>
<ImmediateOrgin>0091000019</ImmediateOrgin>
<FileCrDt>140611</FileCrDt>
<FileCrTm>0449</FileCrTm>
<FileIdMdfr>A</FileIdMdfr>
<RecSize>094</RecSize>
<BlockingFctr>10</BlockingFctr>
<FormatCd>1</FormatCd>
<ImmediateDstnNm>MCSCLDA_TESTIN</ImmediateDstnNm>
<ImmediateOrginNm>XPLLS KNRGO CNNK</ImmediateOrginNm>
<RefCd/>
</HeaderRec>
<BatchHdrRec>
<RecordTypeCode>2</RecordTypeCode>
<ServClsCode>200</ServClsCode>
<CmpnyName>MCSCLDA_TESTIN</CmpnyName>
<CmpnyDiscretionaryData>e-Bill</CmpnyDiscretionaryData>
<CmpnyIdfn>2390714890</CmpnyIdfn>
<StdClsCode>TEL</StdClsCode>
<CmpnyEntryDesc>e-Bill</CmpnyEntryDesc>
<CmpnyDescDate/>
<EffEntryDate>140610</EffEntryDate>
<SettlementDate>000</SettlementDate>
<OrgntrStatusCode>1</OrgntrStatusCode>
<OrgntrBatchCode>091000017000001</OrgntrBatchCode>
</BatchHdrRec>
<FileControlRec>
<RecordTypeCode>0</RecordTypeCode>
<BatchCnt>000060</BatchCnt>
<BlockCnt>000025</BlockCnt>
<EntryAddendaCnt>00000120</EntryAddendaCnt>
<EntryHash>0995048661</EntryHash>
<TtlDbtEntryDlrAmt>000001265867</TtlDbtEntryDlrAmt>
<TtlCrdtEntryDlrAmt>000000000000</TtlCrdtEntryDlrAmt>
<Reserved/>
</FileControlRec>
</GENVNDRReturnedItem>at step 8 of 9 of the file adapter wizard, the icon appears as a cog, on the right, with caption "define schema for native format".
I have JDev 11..1.1.3.0
The problem might be with the version of the SOA extensions you have installed.... -
RFC not Reading the data's all time.......
Hi all,
I am sending the delivery information from sap to b2b , through rfc, When i do the test run for this RFC i took data's sometime and the next time it is not taking any data, Casn you explain me.Hi Karhik,
Thank you for that Trans Code... thers it is working...
but why not in KE5Z ?? I was specifying there doc no...
Anywys.. Thank you Karthik..
Byee.. Suresh
Message was edited by:
Suresh Kumar -
RFC -Not reading the data all time
Hi all,
I am sending the delivery information from sap to b2b , through rfc, When i do the test run for this RFC i took data's sometime and the next time it is not taking any data, Casn you explain me.Hi,
For this issue,I would like to know if we can access or see the file in the DVD.
Did you receive the error message？
I suggest you check the Device Manager to see if the device is marked with a yellow exclamation point.
Meanwhile,please use the CD/DVD troubleshooter tool ,which can automatically find and fix some problems with CD/DVD.
http://go.microsoft.com/?linkid=9840807
Hope this helps.
Regards,
Kelvin hsu
TechNet Community Support -
MacBook not reading the data on my harddrive now?
So I have a Lacie 80 gig harddrive that I have been able to read before but for some reason it won't now. It shows that there is data on there but it won't show the folders. It does read my WD Passport and it's contents. I have all of my 60 gigs of music on the Lacie and was about to convert all the WMA's and put them on the WD but now I might be out of luck. Does anybody have any ideas?
hi
format it with a pc in msdos mod
regards -
Profit Center is not updating in Vendor line item
Hi Experts,
For my GL postings in F-43, F-41, F-53 ,F-54 and F-28 the 1st line item corressponds to Vendor or Customer, the profit center is not updaitng the values and shows nill. We have given check in Exit and Substitution but its not updating in BSEG structure as its functioning like loop.
Pls advise, how to resolve it.
thanks & reagrds
sankar.Hi Bharathi,
thanks for your prompt reply.
But as per my Client requirement, we need to pass the profit center values to the vendor/customer line items also.In such case, what' s the solution?
Pls advise.
regards
Sankar/Brahma -
I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.
Hello. Most of the engineers in developer exchange are more familiar
with NI products. Contacting ICS for technical support is a better
course of action. -
I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
Attachments:
try2.txt 2 KB
read_array.vi 21 KBThe problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
Here are some of your choices to fix your problem.
1. Change the source file to a tab delimited file. Your VI will then run as is.
2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does. -
my up to date iMac can not read the lightroom 5 installation dvd I received for christmas, the dvd player works fine with other dvd's, is there a way to download the program with the dvd's serial number?
No need to worry about the disk version. You would just have to install an update anyway as soon as it was installed. Download from the link provided below and use the serial number you have to activate.
Product updates -
Profit center document not generated after creating the billing document
Hi,
I have few billing document for which the accounting document is created, but no profit center document got generated. What could be the reason? The profit center is captured at the account assignment tab of sales order as well as at the item level of Invoice and in accouting document too. The only problem is it has not generated the "Profit center document". Pl help. Thanks in advance.Hi
When you save the billing document then the accounting document and Controlling document gets generated.
A profit center gets captured and it can be used when we check the accounting document. But make sure that for the G/L accounts profit center is assigned and in your controlling area details also profit center is checked.While configuring controlling then the profit center should also be assigned . to the G/L accounts .So kindly check with the help of your FICO consultant wheather proper assignment has been done or not
Regards
Srinath -
Can we assign the same profit center to diff costcenter master data
hi all
can we assign the same profit center to diff costcenter master data
what are the impacts in control parameters for actual and plan dat a
Thanks
MvNrHello,
There is no need that you should have the profit center and cost center one to one relation.
You can assign number of profit centers to a cost center. Meaning that the same profit center can be used in different cost center master data. Whenever, you make posting to cost center, the same will be flown to profit center.
For example when you post actual line items, it will update GLPCA and GLPCT in profit center accounting.
Regards,
Ravi -
Profit center is not Detemined in sales order for a scenario below
1. profit center is maintained in Material Master
2.Create a sales order and enter the item , hit the enter key, Profit center is shown,
3. Now delete the plant at item level and hit enter, Profit center is not shown,
4. NOW ENTER THE PLANT AGAIN AND HIT THE ENTER KEY, THE PROFIT CENTER IS NOT SHOWN AT THE ITEM LEVEL,
thanks is advance for the help !!Hi,
Ensure that the profit center is assigned to your Sales order.
Also maintain the following settings in copy control.
Goto the T.Code "VTFA".
Select your valid combination.Details.
Double click on "Item".Select your Item category.
Details.
Maintain "Copy requirements" as "002".
Data VBRK/VBRP as "002".
Regards,
Krishna.
Maybe you are looking for
-
How to make a Exception class in java ?
I want to make a class called SomeException. I want to throw this exception from my class Myclass. How to do it ??
-
How to find variables in an fla file?
Hello all, I purchased a flash web template that is very complex, and have been learning flash more earnestly from it. I only know how to find actionscripts by clicking on frames in symbols with an "a" One such frame makes refences to _root.READ = 1
-
Problem Generating Document/Literal Web Service
Hi folks.. I am currently using JDeveloper 10.1.3 (Preview Edition) and I am having trouble getting the Create Java Web Service wizard to work correctly when generating a document/literal web service. After going through the wizard selecting the appr
-
IOS 8 bluetooth and modem mode?
Hello, I have installed iOS 8 on my iPhone 5s and on my iPad 4. Firstly there is no more modem functions in the phone. Secondly there is no connection through iPhone and iPad. Tell me please somebody, what to do and will everything in the near future
-
When I uploaded photos from my ipad to my desktop, for some reason I ended up with numerous doubles and triples. How can I find the duplicate photos and isolate them and then delete them?