Profit center line items are not displaying in KE5Z

HI Eperts,
we are executing tcode KE5Z. System is not displaying any line items. because we have missed out in configuration updation of line items and on line transfer check boxes activation in 1KEF.
please advise how we have to retreive whole data posted up to now under this controlling area..
Regards
vekat....

Hi Venkat,
Please check the following link.
[http://help.sap.com/saphelp_45b/helpdata/en/eb/1370e343c411d1896f0000e8322d00/frameset.htm]
Also check the tcodes 1KE8 (Transfer FI Actual Data), 1KEC (Transfer MM Actual Data) and 1KE9 (Transfer SD Billing Documents)
The path for these tcode is as under:
Controlling --> Profit Center Accounting --> Tools --> Prepare Production Startup --> Data Transfer.
Please check in your test system first.
Regards,
Sameer

Similar Messages

AIAB Error is showing profit center line item 001 not filled

Dear All,
In Asset Account while posting AIAB t.code system is showing error
Balancing field "Profit center" in line item 001 not filled.
Message no. GL2201
Diagnosis.
The profit center marked as balancing is not filled with any value in line item 001, even after document splitting
System response
The document cant be posted
Procedure
First check your entry.
additional causes could be:
.No value can be derived for this field from the current document data.
.You have entered a document type that is not designed for this business purpose.
previously it is coming correct now we are splitting two company codes means previously company code 0555 now we are splitting and creating another company code 0666 in that company only it is showing the error.
Regards,
Teja

Hi
Did you maintain cost object in your asset master
And does your IMG settings for the new co are in place to refer Cost Obects from asset master for Purchase and depreciation transactions
you do this in the IMG Step "Integration with General Ledger"
Regards
Ajay M

TDS line items are not Display in FB60

Hi Experts,
when in simulate a document in T code- FB60. the TDS amount is calculated properly . DR , Cr is ok but the Line item of the TDS is not displayed. when i post the document and open in FB03 all line items are dispalyed with TDS Line items also.. Proper Tax code of payment and invoice is attached.
why not shown in FB60 when simulating a document??

Hi
If in FB60 you want to simulate tax items also, click on simulate from menu, you will be able to see the required details. If you click on simulate icon, it will not be visible.
Regards
Sanil Bhandari
<a href="http://www.vcq.biz/">nature wallpapers</a>, <a href="http://www.utorrent.name/">utorrent</a>f in FB60

Balancing field "profit center" line item 001 not filled

Dear Gurus,
I am trying to post an vendor invoice in fb60 , but i am getting the above error message.
The g/l account involved in the transaction is related to purchase price variance.
Can somebody help me what could be the problem.
Cheers
Balaji

The same issuse what i have faced at the time of document spliting n case of miro with debit note
pls go through the following examples waht i have implemented
SOLUTION:BY MAINTAIN SPLIT RULE THIS IS SOLVED AS FOOLOWS
PATH:SPROSPA REF IMGFAGLBUSINEE TRANSACTION--DOCUMENT SPLITINGEXTENDED DOCUMENT SPLITING-
DEFINE SPLITING RULE
METHOD : SPLITING METHOD: TRANSACTION :BUSINESS TRANSACTION: VARIANT : VARIANT
Z000000012 PRIL SPLIT 0000 UNSPECIFIED PosTING Z002 Vendor Invoice/Document/Credit Memo
BY SELECTING THE ABOVE1 AND DOUBLE CLICK ON ITEM CATEGORYS TO BE EDITED.THERE ACTUALLY CATEGORY MAINTAIEND FOR
TDS VENODR LIKE THAT BUT WE FACED THE PROBLE WITH ARTICLE AND PROFIT CENETRE.THERE WE HAVE MAINTAINED CATEGORY
FOR ARTICLE LIKE

Profit center line item report

Hello All,
A sales order is created with reference to a service order, now when I see Profit center line items, the function area available in Service order is differ from the function area displaying with sales document number in profit center line item report. Can anyone please tell me where could be the problem.
Full points will be awarded for the answer.
Thanks & Regards
Srini

Hi,
what SAP release do you have ?
Normally the derivation of the functional area is made with the following logic:
1) manually entered
2) FI-Substitution (calling point 5 or 6 since ERP2004)
3) cost center
4) cost element
Please see also SAP note 106180 of how to correct wrong functional areas in PCA.
Best regards,
Andreas

Profit center line items KE5Z - order missing - GLPCA-AUFNR

Hi folks,
could anybody give me an advice how to arrange that the order will be displayed in the KE5Z report?
Field GLPCA-AUFNR
Thanks a lot.
Regards
Edited by: Peter Jankech on Jun 4, 2008 1:41 PM

Sorry for unclear set question.
I know how to edit a layout.
The problem is, that the field GLPCA-AUFNR is initial, therefore in KE5Z-Profit center line items the field order is empty.
Is there any customizing setting or SAP-Note, which ensures that the field GLPCA-AUFNR is filled?
Thanks

Balancing field profit centre line item 001 not filled

Hi Guru's,
am facing payroll posting problem system throwing error as Balancing field in profit centre line item 001 not filled i have checked every thing is correctly maintained and please guide me where i have gone wrong and where exactly i get this line item to check please help me in solving my problem, as it is urgently required
thanks in advance
chaitra

Balancing field "Profit Center" in line item 001 not filled
Above error is coming due to splitting .Try to do the following process
First check the line item 001 and get the GL no for which GL you are getting the error.
Ask your FI persons, what is the default Profit Center for that company code.
Goto Tcode FAGL3KEH and enter the company code......enter GL code and Default profit center in the last column.
Before doing this check the Business Area in IT 0027 and IT0001.Make sure that same Business Area in these ITs.
Mohan

Automatic Payment program -line item cleared not displaying in table

automatic Payment program -line item cleared not displaying in table
i have re run the APP program DUSR1 same earlier it has run twice but table dose not show double payment to vendors how to resolve the issue.
Can some one please guide me on this.

Hi Priyanka,
First, which table are you referring to. If your fist APP run clears the line item, it will no longer be available in the open item.
Please be more specific on the problem so that we can try to help you. If possible, please provide screenshots.
Regards,
Ganesh

Asset Line items are not updating in table ANEP

Hi friends,
I found that asset line items are not getting updated in ANEP table,.
This is my precedure for posting of depreciation.
I'll create Asset through AS01, then i'll use the T.Code: F-90.. then i'll run the depreciation program thru t.Code: AFAB.
In but i am unable to capture the values of Planned and Depreciated or Posted values in ANEP.. Is there is any other table for this...
Where is the mistake in my process..
thanks in advance..
Naveen

HI Naveen
The FI-AA documents are stored in tables ANEK (document header), ANEP (document line items) and ANEA (proportional values). You can use FI-AA standard report RABEWG_ALV01 to list all transactions to an asset in one fiscal year, and report RAABGA_ALV01 to list only retirement postings.
ANEA should be the solution you are looking for.
Hope it helps!
Cheers
Z

Few line items are not coming at the time of creation of delivery

Dear Experts,
When the user creating the delivery few line items are not picking in the delivery document
the following checks i verified,
Stock is available
shpping condition is differ from sold to party and sales document
Plants are same for all the line items
why the few line items are not coming in the delivery document creation,
please help me to sort out this issue
Thanks and Best Regards,
Muralidharan S

Hi,
Check below points.
Point 1:
When you create a delivery document, you create it for a Shipping Point.
So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
Others got a different shipping point and that's why it didn't come to the same delivery document.
Shipping point determined based on below criteria
- Shipping Condition - From customer master
- Loading Group - Material
- Plant - Delivery Plant of the sales order line item
You assign a proffered shipping point for above combination in configuration.
If that combination is not find, those line items are not going in to the delivery.
You can check the log of the delivery document for more information as well.
Point 2:
Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
Al Requested delivery dates has to be on or before the "Selection Date" you entered in the VL01N screen.
Those line items which has a date more than that will dropped in the delivery.
Best regards,
Anupa

Line items are not appearing for some users

Hi
In one module pool program some line items are not appering for specific users. For Ex: Out of 5 line items user1 is able to see only 3 and user2 able to see all the line items. what might be the reason.
Regards
John.

Hi,
What do you mean by line items? Are you talking about screen fields in your module pool program or output of the program?
Please clarify your issue.
Regards,
RS

Line items are not coming on next page in Bill of Lading

When I am printing Bill of Lading, if it has around 8 line items then its printing on the first page, but if line items are more then its not printing the remaining line items on second page.
I have one delivery with 10 line items, when I am printing it then on first page 7 line items are coming and for 8 line item only material is printing and on second page its description is printing but last two line items are not printing at all.
Kindly help me to resolve the issue as it is very critical.

Hi,
Check below points.
Point 1:
When you create a delivery document, you create it for a Shipping Point.
So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
Others got a different shipping point and that's why it didn't come to the same delivery document.
Shipping point determined based on below criteria
- Shipping Condition - From customer master
- Loading Group - Material
- Plant - Delivery Plant of the sales order line item
You assign a proffered shipping point for above combination in configuration.
If that combination is not find, those line items are not going in to the delivery.
You can check the log of the delivery document for more information as well.
Point 2:
Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
Al Requested delivery dates has to be on or before the "Selection Date" you entered in the VL01N screen.
Those line items which has a date more than that will dropped in the delivery.
Best regards,
Anupa

Document library items are not displaying in sorted order in sharepoint 2013

Hi,
I have a document library , I am storing document sets on it.
28326 items are there in the library.
I have configured sort on Name columns. Initially items are displaying in sorted order like (A,B,C,D,E...)
Now Items are not displaying in a sorted order it is displaying like (A, B,C,D,E,A,C...) like this.
Please help me on this sorting issue.
Thanks,
Samir

Are the documents displaying in your image inside the document sets? If so then your sets (folders) are displaying in alphabetical order and the documents inside the sets are displaying in alphabetical order. This is what i would expect.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Line items is not displaying

Hi,
When i simulate in F-28, line items is not displaying
eg: 40 SBI 1500
only displaying the remaining items like
eg: 40 discount 500
50 ABC 2000
is not displaying
what may be reason. where can i change settings
Rgds
sunfico

This will happen as the system searches for automatically created line items, in this case, the discount.
Nothing to worry, press Enter key twice, after simulation, you should get the all line items display
Thanks
Siva

CIN: Items are not displayed while updating the RG1 Register using T Code:

Hi Experts,
Items are not displayed while updating the RG1 Register using T Code: J1I5.
System is not showing any error message.
Can any one explain to update the RG1 Register?
Thanks
Chandra

Hi,
dont go the table again and again . the table is updated at intial stage only for stock update but not when SAP is running.
In day to day bussiness the flow is as follows:
Production - MB31 - to Unres stock
Sales - VL02n - PGI - to customer - i.e out of unres stock
Every day u can run TC J1i5 once in a day as decided and update the register so all transactions which have happend in that day gets updated i.e both input and output.
and this will happen every day.
hence dont use table as it is only for intial data upload i.e just before golive.
Hope i am clear.
krishna

Profit center line items are not displaying in KE5Z

Similar Messages

Maybe you are looking for