Profit Center Master Data - Validation - User Exit

Hi,
I need to add few validation to the profit center master data. If there is any user exit that I can use or is there any validation like OB28 (we have for financial accounting document) that can be used.
Please help me out.
Regards,
Binay Agarwal

We are on version 4.6C. Requirement is that while creating profit center, two fields, Budget Holder and CC Board Member field should be updated via some valid user id that exist in SAP.
This user id would be used in work flow. This fields are free field and would accept anydata. But subsequent processes would be hindered. Same thing has been implemented for Cost center and we were able to get hold of user exit but I am struggling to find the same for profit center.
As far as I am aware there might not be any user exit for KE51 tcode. Now only point is is there any other way (like validation) which can be setup before the data us saved so that we have control over the data being saved in these two fields.
Regards,
Binay Agarwal

Similar Messages

  • Profit Center Master Data - User Exit

    Hi,
    I need to add few validation to the profit center master data. If there is any user exit that I can use or is there any validation like OB28 (we have for financial accounting document) that can be used.
    Please help me out.
    Regards,
    Binay Agarwal

    Hello Binay,
    in comparison to the cost center master data, there is no user exit for profit center master data.
    Cheers,
    Daniela

  • Profit Center Master Data transfer via ALE (ke77) == Additional fields

    Hi SAP Community,
    I am using ke77 to transfer Profit Center Master Data. We have introduced an additional field in the master data which is unfortunately not transferred via ke77 (non SAP std field). Do you guys know how to include user-defined fields via ke77 (user exit, etc...)?
    Thanks in advance for your support.
    Cheers,
    Chris

    you must not create all segments in the IDOC  if you dont want the views.
    e.g. E1MBEWM is used for the accounting data. without this you wont get that view.

  • How to hide field in profit center masted data?

    Hi,
    I would like to know how to hide the field segment in profit
    center master data
    Alternatively I would like to know which user exit used
    to prevent the feeding of the field segment in profit center
    master data.
    Thanks in advance,
    Osvaldo
    Edited by: Osvaldo Cavagnero on Mar 4, 2010 1:43 PM

    Dear,
    Try de-activating the indicator through
    SPRO>Financial Accounting(new)>GL Accounting (New)>Preparation for productive start>Migration of existing SAP Data>Additional Activities>Make settings for segment and segment derivation.
    Maintain Segment.
    Hopefully it has to work.
    Regards,
    Syed Hussain.

  • Restricting Creation/Update of Profit Center Master Data through KE51/KE52

    Hi,
    I have a scenario where profit center master data is maintained in MDM which acts as central repository and the master data is syndicated from MDM to ECC through PRCMAS IDoc. Business requirement is that since MDM is acting as central repository creation/update for profit center through transactions KE51/KE52 should be restricted in ECC. I know that through roles we can restrict user to create profit centers but is there any way/configuration steps which we can perform to restrict user to create profit centers through transaction and I also want to know if that process would affect the creation/updation of master data through PRCMAS IDoc.
    Thanks,
    Amit

    Hi,
    As I told you can go forward using SetID but for that you have to create the SET than assign it to a table and also have to cutomize a standard FM.
    Meanwhile I will tell you a easy way you can opt for Transaction Variant usinh SHD0 where dont give the option to save so that no user can create any Profit Centre and than assign that Tcode to the users.
    Its a simple way hope it helps you.
    Thanks
    Arbind

  • LSMW Profit Center master data upload

    Hi All,
    After uploading profit center master data, when i look at the profit center Hierarchy (KCH3), against the profit centers uploaded through LSMW, i am getting a message saying "No valid master record". Any suggestions to rectify this?
    Thanks in advance,
    Shivguru

    Hi,
    The reason of facing this problem is that, if while creating Profit Center, you give valid from (date) other than 1st of any month, then when you check in KCH3 i.e. Profit Center Group : Structure, you will find No Master Record against Profit Center.
    While creating Profit Center, valid from (date) should always be 1st of any month.
    For eg: While creating Profit Center, you have taken Valid from (date) May 3rd, 2011, then once you check in KCH3, it will show no Master Record against the Profit Center.
    Worst thing is that you cant change valid from (date) of a profit center, once it is created (not sure about new version of SAP).
    The solution for this problem is, delete the profit center by using T Code KE54 and again create profit Center with Valid from (date) May 1st, 2011.  After doing this, check in T Code KCH3, you will find Profit Center name against that Profit Center.
    In case you are not able to delete Profit Center (which will happen in old SAP versions, for eg; 3.1 Version), then Block that Profit Center.  To block profit center, use T Code KE52, call up the profit center, go to indicators tab and put a check and lock indicator.  After that dont forget to click the Match stick button to Activate your new state otherwise profit center will not be blocked.  After blocking the old profit center, create a new profit center with new Profit Center number and with Valid from (date) beginning with first of any month.  For Eg: May 1st 2011.
    In case you are not even able to block profit center (which can happen in old version of SAP), then the only option left is change the name and description of profit center to Do not use.  Though anyone can post entry to this Pofit Center, but by looking at the name and description, they will come to know that they should not post entry to this Profit Center.  After that create a new profit center with new Profit Center number and with Valid from (date) beginning with first of any month.  For Eg: May 1st 2011
    Thanks,
    Nishtha Gupta

  • Load for Profit center Master data Fails?

    When i am trying to load profit center master data the load fails with this error message
    ZCONTENT : Data record 1 ('00100000000666 '): Version 'Arcade ' is not valid     
    ZCONTENT : Data record 59 ('00100000001055 '): Version 'Simulation ' is not valid
    YYBRAND : Data record 87 ('00100000001084 '): Version 'Alter Echo ' is not valid
    YYDEVMENT : Data record 103 ('00100000001100 '): Version 'Externally developed ' is not valid     
    Like these errors i have so many data records failed. Please suggest me how to resolve this issue.

    Hi Naga,
    Looks like the input data needs to be corrected. See if the messages are coming from:
       a) Update/Transfer rules?
    if you are loading from a flat file...preview and check all the field values in the relevant records (1, 59, 87, etc...)
    Good luck, BB

  • Segment field is not shown in profit center master data

    Hi,
      When i activated New GL ,but the segment field is not shown in profit center master data. How can i make the field shown ?
    Thanks.

    After activating the New GL have you defined the segment? First define the segment under Enterprise Structure and in Fin.Acctg Global settings(New)-Legers-Display scenarios for General Ledger Accounting, you need to create new entries for FIN_PCA & FIN_SEG.
    Hope this helps you.

  • Segment not activate in profit center master data

    Dear all,
    I activated all the profit centers using KEOA2, but the segment field in profit center master data is still greyed out ? is there any process to activate the segment as well? Your input will be appreciated.

    SPRO>Financial Accounting(new)>GL Accounting (New)>Preparation for productive start>Migration of existing SAP Data>Additional Activities>Make settings for segment and segment derivation.
    Maintain Segment.
    Indicator is set('X')
    You can edit the segment in the profit center master data before New
    General Ledger Accounting is activated.

  • Profit Center Master Data- Segement need to be changed

    Hello Gurus,
    We have somehow set wrong segment in Profit Center Master Data, We need to change the segment. Transction is posted to the profit center what is the easy way out to change the segment for profit Center master data?
    Any help will be apreciated? i have gone through the SAP Note
    940721  - KE52: Segment in prof center master record cannot be changed
    Or a work around solution.
    Thanks
    Prasad

    Hi Prasad,
    As you already find out, once there is transaction data on a profit center, the segment field is no longer changeable in order to prevent inconsistencies and incorrect result from the segment reporting point of view. This is standard system behaviour!
    You can try with the the following *Notes. It will provide further corrections relevant for your issue.
    *Notes:1373616    Segment in profit center changed despite transaction data
                1037986    KE52: Changing the segment in the profit center master data
    Regards
    Eugene

  • Segment field must be required field in Profit Center Master Data

    Dear Consultants,
    I want to make segment field as mandatary in the profit center master record.
    Is there any standard functionality to control the fields in PCA? Could you please tell me how we control the fields in PCTR Master?
    Regards,
    Srinivas

    There is NO standard config.
    All you could do is to put a user exit in the create profit center program to make sure there is a value in the segment field.
    You will also need to make sure it is there in change PC.
    Also make sure you have added a Segment to all of your exisitng PC data before you activate the code.

  • Segment field missing while creating profit center master data in SAP ECC6.

    Hi,
    I am working on ECC6.0 IDES. When I create profit center master I dont see the field for Segment on the profit center master.
    Is there any setting which needs to be activated to see the the field for Segment on profit center master.
    Regards,
    Raghav

    HI Raghavendra,
    Check if the segmentation scenario is available for general ledger at the following path
    Financial Accounting (New)>Ledgers> Fields > Customer Fields > Display Scenarios for General Ledger Accounting
    Regards
    Sach!n
    Edited by: Sachin Bhutani on Mar 26, 2009 11:23 AM

  • Profit Center Master Data text

    HI All,
    I have a few problems regarding the master data text for 0profit_ctr.
    Our company has uploaded quite alot of historical data ( not my idea) to its master data.
    The problem is that for each Profit center record we have two lines in 0profit_ctr, both with a different set of FROM and TO dates.
    Only one of these records are we interested in and thats the one with To date of 31.12.9999.
    What I want to do is for the system to upload the Text field of the profit centre regardless of the dates involved, at present the old record has no profit centre text and this is the record the reports are reading.
    The system is only picking up the text record for the active profit centre.
    I have tried deleting the from and To dates for 0profit_ctr_text but still the load fails.
    Any ideas?
    Thanks

    Is it a time dependent master data? Then you will not be able to delete the From and To Date.
    If you are not interested in the validity of a profit center, You have to make it time independent.
    Also when you say it loads Text..Where are you trying to Load. If you are trying to Update using a Routine/Code, Then while reading the master data, You can delete the records having Text as blank and then update to the Target Field.
    Thanks
    Sachin

  • Making segment field mandatory in Profit Center Master Data

    Hi,
    We are using SAP version ECC 6. While creating a profit center using KE51, we would like to make the 'Segment' field mandatory. Can anyone tell me how can this be done? Thanks.
    Regards,
    Sangeeta

    Hi,
    There seems to be no standard setting which makes this mandatory.  You may need to take the help of an ABAPer to create a field exit.
    Cheers.

  • 0KEQ - transport for Profit Center Master Data

    I have created a transport for transferring Profit Centers from our source client to move to client for unti test and QA.  All changes come through but the PCs that are deleted in source client are still in the target clients after the application of the transport.
    Any help from the community, why so? and if there is additional activity needed at the time of creation of the transport to effect deletions in the target clients. 

    Hello Bashir,
    It seems that there  is an inconsistency in target system/source system.
    Please  Go to T-code: KCH6N and using the following menu path to check and correct the
    inconsistency in source system and target system.
    T-code:KCH6N
    MENU =>Extras -> Ambiguity Check
    MENU=>Extras -> Hierarchy master data -> Test
    and afterwards go to MENU=>Extras -> Hierarchy master data -> Comparison
    If the inconsistency can not be corrected in Target system, you need to make sure that there is no
    inconsistency in source system. After that you can re-transport the profi centers to target system.
    Please also refere to SAP note 1595018.
    Best regards,
    Ronghua Fan

Maybe you are looking for